net: dsa: mv88e6xxx: Allow external SMI if serial

p0_mode set to one of the supported serial mode should not prevent
configuring the external SMI interface in
mv88e6xxx_g2_scratch_gpio_set_smi. The current masking of the p0_mode
only checks the first 2 bits. This results in switches supporting
serial mode cannot setup external SMI on certain serial modes
(Ex: 1000BASE-X and SGMII).

Extend the mask of the p0_mode to include the reduced modes and
serial modes as allowed modes for the external SMI interface.
Signed-off-by: Marcus Carlberg <marcus.carlberg@axis.com>
Link: https://lore.kernel.org/r/20220824093706.19049-1-marcus.carlberg@axis.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/dsa/mv88e6xxx/global2.h

@@ -298,7 +298,7 @@
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA1	0x71
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA1_NO_CPU	BIT(2)
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA2	0x72
-#define MV88E6352_G2_SCRATCH_CONFIG_DATA2_P0_MODE_MASK	0x3
+#define MV88E6352_G2_SCRATCH_CONFIG_DATA2_P0_MODE_MASK	0xf
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA3	0x73
 #define MV88E6352_G2_SCRATCH_CONFIG_DATA3_S_SEL		BIT(1)