Merge branch 'dt-bindings-ocelot-switches'

Colin Foster says

====================
dt-binding preparation for ocelot switches

Ocelot switches have the abilitiy to be used internally via
memory-mapped IO or externally via SPI or PCIe. This brings up issues
for documentation, where the same chip might be accessed internally in a
switchdev manner, or externally in a DSA configuration. This patch set
is perparation to bring DSA functionality to the VSC7512, utilizing as
much as possible with an almost identical VSC7514 chip.

This patch set changed quite a bit from v2, so I'll omit the background
of how those sets came to be. Rob offered a lot of very useful guidance.
My thanks.

At the end of the day, with this patch set, there should be a framework
to document Ocelot switches (and any switch) in scenarios where they can
be controlled internally (ethernet-switch) or externally (dsa-switch).

---

v6 -> v7
  * Add Reviewed / Acked on patch 1
  * Clean up descriptions on Ethernet / DSA switch port bindings

v5 -> v6
  * Rebase so it applies to net-next cleanly.
  * No other changes - during the last submission round I said I'd
    submit v6 with a change to move $dsa-port.yaml to outside the allOf
    list. In retrospect that wasn't the right thing to do, because later
    in the patch series the $dsa-port.yaml is removed outright. So I
    believe the submission in v5 to keep "type: object" was correct.

v4 -> v5
  * Sync DSA maintainers with MAINTAINERS file (new patch 1)
  * Undo move of port description of mediatek,mt7530.yaml (patch 4)
  * Move removal of "^(ethernet-)?switch(@.*)?$" in dsa.yaml from patch 4
    to patch 8
  * Add more consistent capitalization in title lines and better Ethernet
    switch port description. (patch 8)

v3 -> v4
  * Renamed "base" to "ethernet-ports" to avoid confusion with the concept
    of a base class.
  * Squash ("dt-bindings: net: dsa: mediatek,mt7530: fix port description location")
    patch into ("dt-bindings: net: dsa: utilize base definitions for standard dsa
    switches")
  * Corrections to fix confusion about additonalProperties vs unevaluatedProperties.
    See specific patches for details.

v2 -> v3
  * Restructured everything to use a "base" iref for devices that don't
    have additional properties, and simply a "ref" for devices that do.
  * New patches to fix up brcm,sf2, qca8k, and mt7530
  * Fix unevaluatedProperties errors from previous sets (see specific
    patches for more detail)
  * Removed redundant "Device Tree Binding" from titles, where applicable.

v1 -> v2
  * Two MFD patches were brought into the MFD tree, so are dropped
  * Add first patch 1/6 to allow DSA devices to add ports and port
    properties
  * Test qca8k against new dt-bindings and fix warnings. (patch 2/6)
  * Add tags (patch 3/6)
  * Fix vsc7514 refs and properties
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Arrow SpeedChips XRS7000 Series Switch
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
 
 maintainers:
   - George McCollister <george.mccollister@gmail.com>

Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml

@@ -66,7 +66,7 @@ required:
   - reg
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml

@@ -85,6 +85,11 @@ properties:
   ports:
     type: object
 
+    patternProperties:
+      '^port@[0-9a-f]$':
+        $ref: dsa-port.yaml#
+        unevaluatedProperties: false
+
         properties:
           brcm,use-bcm-hdr:
             description: if present, indicates that the switch port has Broadcom

Documentation/devicetree/bindings/net/dsa/dsa-port.yaml

@@ -4,18 +4,19 @@
 $id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Switch port
+title: Generic DSA Switch Port
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
   - Florian Fainelli <f.fainelli@gmail.com>
-  - Vivien Didelot <vivien.didelot@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
 
 description:
-  Ethernet switch port Description
+  A DSA switch port is a component of a switch that manages one MAC, and can
+  pass Ethernet frames. It can act as a stanadard Ethernet switch port, or have
+  DSA-specific functionality.
 
-allOf:
-  - $ref: /schemas/net/ethernet-controller.yaml#
+$ref: /schemas/net/ethernet-switch-port.yaml#
 
 properties:
   reg:
@@ -58,25 +59,6 @@ properties:
       - rtl8_4t
       - seville
 
-  phy-handle: true
-
-  phy-mode: true
-
-  fixed-link: true
-
-  mac-address: true
-
-  sfp: true
-
-  managed: true
-
-  rx-internal-delay-ps: true
-
-  tx-internal-delay-ps: true
-
-required:
-  - reg
-
 # CPU and DSA ports must have phylink-compatible link descriptions
 if:
   oneOf:

Documentation/devicetree/bindings/net/dsa/dsa.yaml

@@ -9,7 +9,7 @@ title: Ethernet Switch
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
   - Florian Fainelli <f.fainelli@gmail.com>
-  - Vivien Didelot <vivien.didelot@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
 
 description:
   This binding represents Ethernet Switches which have a dedicated CPU
@@ -18,10 +18,9 @@ description:
 
 select: false
 
-properties:
-  $nodename:
-    pattern: "^(ethernet-)?switch(@.*)?$"
+$ref: /schemas/net/ethernet-switch.yaml#
 
+properties:
   dsa,member:
     minItems: 2
     maxItems: 2
@@ -32,9 +31,18 @@ properties:
       (single device hanging off a CPU port) must not specify this property
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-patternProperties:
+additionalProperties: true
+
+$defs:
+  ethernet-ports:
+    description: A DSA switch without any extra port properties
+    $ref: '#/'
+
+    patternProperties:
       "^(ethernet-)?ports$":
         type: object
+        additionalProperties: false
+
         properties:
           '#address-cells':
             const: 1
@@ -43,19 +51,8 @@ patternProperties:
 
         patternProperties:
           "^(ethernet-)?port@[0-9]+$":
-        type: object
             description: Ethernet switch ports
-
             $ref: dsa-port.yaml#
-
             unevaluatedProperties: false
 
-oneOf:
-  - required:
-      - ports
-  - required:
-      - ethernet-ports
-
-additionalProperties: true
-
 ...

Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Hirschmann Hellcreek TSN Switch
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>

Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml

@@ -157,9 +157,6 @@ patternProperties:
     patternProperties:
       "^(ethernet-)?port@[0-9]+$":
         type: object
-        description: Ethernet switch ports
-
-        unevaluatedProperties: false
 
         properties:
           reg:
@@ -168,7 +165,6 @@ patternProperties:
               for user ports.
 
         allOf:
-          - $ref: dsa-port.yaml#
           - if:
               required: [ ethernet ]
             then:
@@ -238,7 +234,7 @@ $defs:
                       - sgmii
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
   - if:
       required:
         - mediatek,mcm

Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml

@@ -11,7 +11,7 @@ maintainers:
   - Woojung Huh <Woojung.Huh@microchip.com>
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:

Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml

@@ -10,7 +10,7 @@ maintainers:
   - UNGLinuxDriver@microchip.com
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
 
 properties:
   compatible:

Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml

@@ -78,7 +78,7 @@ required:
   - reg
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml

@@ -13,7 +13,7 @@ description:
   depends on the SPI bus master driver.
 
 allOf:
-  - $ref: "dsa.yaml#"
+  - $ref: dsa.yaml#/$defs/ethernet-ports
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 maintainers:

Documentation/devicetree/bindings/net/dsa/qca8k.yaml

@@ -66,15 +66,11 @@ properties:
                  With the legacy mapping the reg corresponding to the internal
                  mdio is the switch reg with an offset of -1.
 
+$ref: "dsa.yaml#"
+
 patternProperties:
   "^(ethernet-)?ports$":
     type: object
-    properties:
-      '#address-cells':
-        const: 1
-      '#size-cells':
-        const: 0
-
     patternProperties:
       "^(ethernet-)?port@[0-6]$":
         type: object
@@ -116,7 +112,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
@@ -148,8 +144,6 @@ examples:
 
         switch@10 {
             compatible = "qca,qca8337";
-            #address-cells = <1>;
-            #size-cells = <0>;
             reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
             reg = <0x10>;
 
@@ -209,8 +203,6 @@ examples:
 
         switch@10 {
             compatible = "qca,qca8337";
-            #address-cells = <1>;
-            #size-cells = <0>;
             reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
             reg = <0x10>;
 

Documentation/devicetree/bindings/net/dsa/realtek.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Realtek switches for unmanaged switches
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>

Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml

@@ -14,7 +14,7 @@ description: |
   handles 4 ports + 1 CPU management port.
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
 
 properties:
   compatible:

Documentation/devicetree/bindings/net/ethernet-switch-port.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch Port
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  An Ethernet switch port is a component of a switch that manages one MAC, and
+  can pass Ethernet frames.
+
+$ref: ethernet-controller.yaml#
+
+properties:
+  reg:
+    description: Port number
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/net/ethernet-switch.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  Ethernet switches are multi-port Ethernet controllers. Each port has
+  its own number and is represented as its own Ethernet controller.
+  The minimum required functionality is to pass packets to software.
+  They may or may not be able to forward packets automonously between
+  ports.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^(ethernet-)?switch(@.*)?$"
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+        description: Ethernet switch ports
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
+additionalProperties: true
+
+$defs:
+  base:
+    description: An ethernet switch without any extra port properties
+    $ref: '#/'
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        description: Ethernet switch ports
+        $ref: ethernet-switch-port.yaml#
+        unevaluatedProperties: false
+
+...

Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml

@@ -18,10 +18,9 @@ description: |
   packets using CPU. Additionally, PTP is supported as well as FDMA for faster
   packet extraction/injection.
 
-properties:
-  $nodename:
-    pattern: "^switch@[0-9a-f]+$"
+$ref: ethernet-switch.yaml#
 
+properties:
   compatible:
     const: mscc,vsc7514-switch
 
@@ -100,35 +99,11 @@ properties:
 
     patternProperties:
       "^port@[0-9a-f]+$":
-        type: object
-        description: Ethernet ports handled by the switch
 
-        $ref: ethernet-controller.yaml#
+        $ref: ethernet-switch-port.yaml#
 
         unevaluatedProperties: false
 
-        properties:
-          reg:
-            description: Switch port number
-
-          phy-handle: true
-
-          phy-mode: true
-
-          fixed-link: true
-
-          mac-address: true
-
-        required:
-          - reg
-          - phy-mode
-
-        oneOf:
-          - required:
-              - phy-handle
-          - required:
-              - fixed-link
-
 required:
   - compatible
   - reg

MAINTAINERS

@@ -14543,6 +14543,8 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Vladimir Oltean <olteanv@gmail.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/
+F:	Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
+F:	Documentation/devicetree/bindings/net/ethernet-switch.yaml
 F:	drivers/net/dsa/
 F:	include/linux/dsa/
 F:	include/linux/platform_data/dsa.h