Commit 86fe1ac0 authored by Sean Young's avatar Sean Young Committed by Mauro Carvalho Chehab

media: rc: simplify ir_raw_event_store_edge()

Since commit 12749b198fa4 ("[media] rc: saa7134: add trailing space for
timely decoding"), the workaround of inserting reset events is no
longer needed.

Note that the initial reset is not needed either; other rc-core drivers
that don't use ir_raw_event_store_edge() never call this at all.

Verified on a HVR-1150 and Raspberry Pi.

Fixes: 3f5c4c73 ("[media] rc: fix ghost keypresses with certain hw")
Signed-off-by: default avatarSean Young <sean@mess.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 48b2de19
......@@ -1055,7 +1055,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
space = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
ir_raw_event_store_edge(dev->remote->dev, space ? IR_SPACE : IR_PULSE);
ir_raw_event_store_edge(dev->remote->dev, !space);
return 1;
}
......@@ -76,7 +76,6 @@ static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
struct gpio_rc_dev *gpio_dev = dev_id;
int gval;
int rc = 0;
enum raw_event_type type = IR_SPACE;
gval = gpio_get_value(gpio_dev->gpio_nr);
......@@ -86,10 +85,7 @@ static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
if (gpio_dev->active_low)
gval = !gval;
if (gval == 1)
type = IR_PULSE;
rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
rc = ir_raw_event_store_edge(gpio_dev->rcdev, gval == 1);
if (rc < 0)
goto err_get_value;
......
......@@ -40,9 +40,9 @@ static void img_ir_refresh_raw(struct img_ir_priv *priv, u32 irq_status)
/* report the edge to the IR raw decoders */
if (ir_status) /* low */
ir_raw_event_store_edge(rc_dev, IR_SPACE);
ir_raw_event_store_edge(rc_dev, false);
else /* high */
ir_raw_event_store_edge(rc_dev, IR_PULSE);
ir_raw_event_store_edge(rc_dev, true);
ir_raw_event_handle(rc_dev);
}
......
......@@ -41,7 +41,6 @@ struct ir_raw_event_ctrl {
/* fifo for the pulse/space durations */
DECLARE_KFIFO(kfifo, struct ir_raw_event, MAX_IR_EVENT_SIZE);
ktime_t last_event; /* when last event occurred */
enum raw_event_type last_type; /* last event type */
struct rc_dev *dev; /* pointer to the parent rc_dev */
/* edge driver */
struct timer_list edge_handle;
......
......@@ -88,7 +88,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
/**
* ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
* @dev: the struct rc_dev device descriptor
* @type: the type of the event that has occurred
* @pulse: true for pulse, false for space
*
* This routine (which may be called from an interrupt context) is used to
* store the beginning of an ir pulse or space (or the start/end of ir
......@@ -96,43 +96,22 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
* hardware which does not provide durations directly but only interrupts
* (or similar events) on state change.
*/
int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse)
{
ktime_t now;
s64 delta; /* ns */
DEFINE_IR_RAW_EVENT(ev);
int rc = 0;
int delay;
if (!dev->raw)
return -EINVAL;
now = ktime_get();
delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
delay = MS_TO_NS(dev->input_dev->rep[REP_DELAY]);
/* Check for a long duration since last event or if we're
* being called for the first time, note that delta can't
* possibly be negative.
*/
if (delta > delay || !dev->raw->last_type)
type |= IR_START_EVENT;
else
ev.duration = delta;
ev.duration = ktime_sub(now, dev->raw->last_event);
ev.pulse = !pulse;
if (type & IR_START_EVENT)
ir_raw_event_reset(dev);
else if (dev->raw->last_type & IR_SPACE) {
ev.pulse = false;
rc = ir_raw_event_store(dev, &ev);
} else if (dev->raw->last_type & IR_PULSE) {
ev.pulse = true;
rc = ir_raw_event_store(dev, &ev);
} else
return 0;
dev->raw->last_event = now;
dev->raw->last_type = type;
/* timer could be set to timeout (125ms by default) */
if (!timer_pending(&dev->raw->edge_handle) ||
......
......@@ -272,14 +272,6 @@ u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
* The Raw interface is specific to InfraRed. It may be a good idea to
* split it later into a separate header.
*/
enum raw_event_type {
IR_SPACE = (1 << 0),
IR_PULSE = (1 << 1),
IR_START_EVENT = (1 << 2),
IR_STOP_EVENT = (1 << 3),
};
struct ir_raw_event {
union {
u32 duration;
......@@ -308,7 +300,7 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev)
void ir_raw_event_handle(struct rc_dev *dev);
int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse);
int ir_raw_event_store_with_filter(struct rc_dev *dev,
struct ir_raw_event *ev);
void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment