Commit 8703317a authored by Shaokun Zhang's avatar Shaokun Zhang Committed by Will Deacon

drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform

For some HiSilicon platform, the originally designed SCCL_ID and CCL_ID
are not satisfied with much rich topology when the MT is set, so we
extend the SCCL_ID to MPIDR[aff3] and CCL_ID to MPIDR[aff2]. Let's
update this for HiSilicon uncore PMU driver.

Cc: John Garry <john.garry@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: default avatarShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: default avatarWill Deacon <will@kernel.org>
parent f1d303a1
......@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <asm/cputype.h>
#include <asm/local64.h>
#include "hisi_uncore_pmu.h"
......@@ -338,8 +339,10 @@ void hisi_uncore_pmu_disable(struct pmu *pmu)
/*
* Read Super CPU cluster and CPU cluster ID from MPIDR_EL1.
* If multi-threading is supported, CCL_ID is the low 3-bits in MPIDR[Aff2]
* and SCCL_ID is the upper 5-bits of Aff2 field; if not, SCCL_ID
* If multi-threading is supported, On Huawei Kunpeng 920 SoC whose cpu
* core is tsv110, CCL_ID is the low 3-bits in MPIDR[Aff2] and SCCL_ID
* is the upper 5-bits of Aff2 field; while for other cpu types, SCCL_ID
* is in MPIDR[Aff3] and CCL_ID is in MPIDR[Aff2], if not, SCCL_ID
* is in MPIDR[Aff2] and CCL_ID is in MPIDR[Aff1].
*/
static void hisi_read_sccl_and_ccl_id(int *sccl_id, int *ccl_id)
......@@ -347,12 +350,19 @@ static void hisi_read_sccl_and_ccl_id(int *sccl_id, int *ccl_id)
u64 mpidr = read_cpuid_mpidr();
if (mpidr & MPIDR_MT_BITMASK) {
if (read_cpuid_part_number() == HISI_CPU_PART_TSV110) {
int aff2 = MPIDR_AFFINITY_LEVEL(mpidr, 2);
if (sccl_id)
*sccl_id = aff2 >> 3;
if (ccl_id)
*ccl_id = aff2 & 0x7;
} else {
if (sccl_id)
*sccl_id = MPIDR_AFFINITY_LEVEL(mpidr, 3);
if (ccl_id)
*ccl_id = MPIDR_AFFINITY_LEVEL(mpidr, 2);
}
} else {
if (sccl_id)
*sccl_id = MPIDR_AFFINITY_LEVEL(mpidr, 2);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment