[POWERPC] celleb: Add support for PCI Express

This adds support for PCI Express port on Celleb.  I/O space of this
PCI Express port is not mapped in memory space.  So we use the
io-workaround mechanism to make accesses indirect.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/cell/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_PCI_MSI)			+= axon_msi.o
 ifeq ($(CONFIG_PPC_CELLEB),y)
 obj-y					+= celleb_setup.o \
 					   celleb_pci.o celleb_scc_epci.o \
+					   celleb_scc_pciex.o \
 					   celleb_scc_uhc.o \
 					   io-workarounds.o spider-pci.o \
 					   beat.o beat_htab.o beat_hvCall.o \

arch/powerpc/platforms/cell/celleb_pci.c

@@ -467,6 +467,9 @@ static struct of_device_id celleb_phb_match[] __initdata = {
 	}, {
 		.name = "epci",
 		.data = &celleb_epci_spec,
+	}, {
+		.name = "pcie",
+		.data = &celleb_pciex_spec,
 	}, {
 	},
 };

arch/powerpc/platforms/cell/celleb_pci.h

@@ -40,5 +40,6 @@ extern int celleb_setup_phb(struct pci_controller *);
 extern int celleb_pci_probe_mode(struct pci_bus *);
 
 extern struct celleb_phb_spec celleb_epci_spec;
+extern struct celleb_phb_spec celleb_pciex_spec;
 
 #endif /* _CELLEB_PCI_H */

arch/powerpc/platforms/cell/celleb_scc.h

@@ -125,6 +125,93 @@
 /* bits for SCC_EPCI_CNTOPT */
 #define SCC_EPCI_CNTOPT_O2PMB   0x00000002
 
+/* SCC PCIEXC SMMIO registers */
+#define PEXCADRS		0x000
+#define PEXCWDATA		0x004
+#define PEXCRDATA		0x008
+#define PEXDADRS		0x010
+#define PEXDCMND		0x014
+#define PEXDWDATA		0x018
+#define PEXDRDATA		0x01c
+#define PEXREQID		0x020
+#define PEXTIDMAP		0x024
+#define PEXINTMASK		0x028
+#define PEXINTSTS		0x02c
+#define PEXAERRMASK		0x030
+#define PEXAERRSTS		0x034
+#define PEXPRERRMASK		0x040
+#define PEXPRERRSTS		0x044
+#define PEXPRERRID01		0x048
+#define PEXPRERRID23		0x04c
+#define PEXVDMASK		0x050
+#define PEXVDSTS		0x054
+#define PEXRCVCPLIDA		0x060
+#define PEXLENERRIDA		0x068
+#define PEXPHYPLLST		0x070
+#define PEXDMRDEN0		0x100
+#define PEXDMRDADR0		0x104
+#define PEXDMRDENX		0x110
+#define PEXDMRDADRX		0x114
+#define PEXECMODE		0xf00
+#define PEXMAEA(n)		(0xf50 + (8 * n))
+#define PEXMAEC(n)		(0xf54 + (8 * n))
+#define PEXCCRCTRL		0xff0
+
+/* SCC PCIEXC bits and shifts for PEXCADRS */
+#define PEXCADRS_BYTE_EN_SHIFT		20
+#define PEXCADRS_CMD_SHIFT		16
+#define PEXCADRS_CMD_READ		(0xa << PEXCADRS_CMD_SHIFT)
+#define PEXCADRS_CMD_WRITE		(0xb << PEXCADRS_CMD_SHIFT)
+
+/* SCC PCIEXC shifts for PEXDADRS */
+#define PEXDADRS_BUSNO_SHIFT		20
+#define PEXDADRS_DEVNO_SHIFT		15
+#define PEXDADRS_FUNCNO_SHIFT		12
+
+/* SCC PCIEXC bits and shifts for PEXDCMND */
+#define PEXDCMND_BYTE_EN_SHIFT		4
+#define PEXDCMND_IO_READ		0x2
+#define PEXDCMND_IO_WRITE		0x3
+#define PEXDCMND_CONFIG_READ		0xa
+#define PEXDCMND_CONFIG_WRITE		0xb
+
+/* SCC PCIEXC bits for PEXPHYPLLST */
+#define PEXPHYPLLST_PEXPHYAPLLST	0x00000001
+
+/* SCC PCIEXC bits for PEXECMODE */
+#define PEXECMODE_ALL_THROUGH		0x00000000
+#define PEXECMODE_ALL_8BIT		0x00550155
+#define PEXECMODE_ALL_16BIT		0x00aa02aa
+
+/* SCC PCIEXC bits for PEXCCRCTRL */
+#define PEXCCRCTRL_PEXIPCOREEN		0x00040000
+#define PEXCCRCTRL_PEXIPCONTEN		0x00020000
+#define PEXCCRCTRL_PEXPHYPLLEN		0x00010000
+#define PEXCCRCTRL_PCIEXCAOCKEN		0x00000100
+
+/* SCC PCIEXC port configuration registers */
+#define PEXTCERRCHK		0x21c
+#define PEXTAMAPB0		0x220
+#define PEXTAMAPL0		0x224
+#define PEXTAMAPB(n)		(PEXTAMAPB0 + 8 * (n))
+#define PEXTAMAPL(n)		(PEXTAMAPL0 + 8 * (n))
+#define PEXCHVC0P		0x500
+#define PEXCHVC0NP		0x504
+#define PEXCHVC0C		0x508
+#define PEXCDVC0P		0x50c
+#define PEXCDVC0NP		0x510
+#define PEXCDVC0C		0x514
+#define PEXCHVCXP		0x518
+#define PEXCHVCXNP		0x51c
+#define PEXCHVCXC		0x520
+#define PEXCDVCXP		0x524
+#define PEXCDVCXNP		0x528
+#define PEXCDVCXC		0x52c
+#define PEXCTTRG		0x530
+#define PEXTSCTRL		0x700
+#define PEXTSSTS		0x704
+#define PEXSKPCTRL		0x708
+
 /* UHC registers */
 #define SCC_UHC_CKRCTRL         0xff0
 #define SCC_UHC_ECMODE          0xf00

arch/powerpc/platforms/cell/celleb_scc_pciex.c

+/*
+ * Support for Celleb PCI-Express.
+ *
+ * (C) Copyright 2007-2008 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/iommu.h>
+#include <asm/byteorder.h>
+
+#include "celleb_scc.h"
+#include "celleb_pci.h"
+
+#define PEX_IN(base, off)	in_be32((void *)(base) + (off))
+#define PEX_OUT(base, off, data) out_be32((void *)(base) + (off), (data))
+
+static void scc_pciex_io_flush(struct iowa_bus *bus)
+{
+	(void)PEX_IN(bus->phb->cfg_addr, PEXDMRDEN0);
+}
+
+/*
+ * Memory space access to device on PCIEX
+ */
+#define PCIEX_MMIO_READ(name, ret)					\
+static ret scc_pciex_##name(const PCI_IO_ADDR addr)			\
+{									\
+	ret val = __do_##name(addr);					\
+	scc_pciex_io_flush(iowa_mem_find_bus(addr));			\
+	return val;							\
+}
+
+#define PCIEX_MMIO_READ_STR(name)					\
+static void scc_pciex_##name(const PCI_IO_ADDR addr, void *buf,		\
+			     unsigned long count)			\
+{									\
+	__do_##name(addr, buf, count);					\
+	scc_pciex_io_flush(iowa_mem_find_bus(addr));			\
+}
+
+PCIEX_MMIO_READ(readb, u8)
+PCIEX_MMIO_READ(readw, u16)
+PCIEX_MMIO_READ(readl, u32)
+PCIEX_MMIO_READ(readq, u64)
+PCIEX_MMIO_READ(readw_be, u16)
+PCIEX_MMIO_READ(readl_be, u32)
+PCIEX_MMIO_READ(readq_be, u64)
+PCIEX_MMIO_READ_STR(readsb)
+PCIEX_MMIO_READ_STR(readsw)
+PCIEX_MMIO_READ_STR(readsl)
+
+static void scc_pciex_memcpy_fromio(void *dest, const PCI_IO_ADDR src,
+				    unsigned long n)
+{
+	__do_memcpy_fromio(dest, src, n);
+	scc_pciex_io_flush(iowa_mem_find_bus(src));
+}
+
+/*
+ * I/O port access to devices on PCIEX.
+ */
+
+static inline unsigned long get_bus_address(struct pci_controller *phb,
+					    unsigned long port)
+{
+	return port - ((unsigned long)(phb->io_base_virt) - _IO_BASE);
+}
+
+static u32 scc_pciex_read_port(struct pci_controller *phb,
+			       unsigned long port, int size)
+{
+	unsigned int byte_enable;
+	unsigned int cmd, shift;
+	unsigned long addr;
+	u32 data, ret;
+
+	BUG_ON(((port & 0x3ul) + size) > 4);
+
+	addr = get_bus_address(phb, port);
+	shift = addr & 0x3ul;
+	byte_enable = ((1 << size) - 1) << shift;
+	cmd = PEXDCMND_IO_READ | (byte_enable << PEXDCMND_BYTE_EN_SHIFT);
+	PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul));
+	PEX_OUT(phb->cfg_addr, PEXDCMND, cmd);
+	data = PEX_IN(phb->cfg_addr, PEXDRDATA);
+	ret = (data >> (shift * 8)) & (0xFFFFFFFF >> ((4 - size) * 8));
+
+	pr_debug("PCIEX:PIO READ:port=0x%lx, addr=0x%lx, size=%d, be=%x,"
+		 " cmd=%x, data=%x, ret=%x\n", port, addr, size, byte_enable,
+		 cmd, data, ret);
+
+	return ret;
+}
+
+static void scc_pciex_write_port(struct pci_controller *phb,
+				 unsigned long port, int size, u32 val)
+{
+	unsigned int byte_enable;
+	unsigned int cmd, shift;
+	unsigned long addr;
+	u32 data;
+
+	BUG_ON(((port & 0x3ul) + size) > 4);
+
+	addr = get_bus_address(phb, port);
+	shift = addr & 0x3ul;
+	byte_enable = ((1 << size) - 1) << shift;
+	cmd = PEXDCMND_IO_WRITE | (byte_enable << PEXDCMND_BYTE_EN_SHIFT);
+	data = (val & (0xFFFFFFFF >> (4 - size) * 8)) << (shift * 8);
+	PEX_OUT(phb->cfg_addr, PEXDADRS, (addr & ~0x3ul));
+	PEX_OUT(phb->cfg_addr, PEXDCMND, cmd);
+	PEX_OUT(phb->cfg_addr, PEXDWDATA, data);
+
+	pr_debug("PCIEX:PIO WRITE:port=0x%lx, addr=%lx, size=%d, val=%x,"
+		 " be=%x, cmd=%x, data=%x\n", port, addr, size, val,
+		 byte_enable, cmd, data);
+}
+
+static u8 __scc_pciex_inb(struct pci_controller *phb, unsigned long port)
+{
+	return (u8)scc_pciex_read_port(phb, port, 1);
+}
+
+static u16 __scc_pciex_inw(struct pci_controller *phb, unsigned long port)
+{
+	u32 data;
+	if ((port & 0x3ul) < 3)
+		data = scc_pciex_read_port(phb, port, 2);
+	else {
+		u32 d1 = scc_pciex_read_port(phb, port, 1);
+		u32 d2 = scc_pciex_read_port(phb, port + 1, 1);
+		data = d1 | (d2 << 8);
+	}
+	return (u16)data;
+}
+
+static u32 __scc_pciex_inl(struct pci_controller *phb, unsigned long port)
+{
+	unsigned int mod = port & 0x3ul;
+	u32 data;
+	if (mod == 0)
+		data = scc_pciex_read_port(phb, port, 4);
+	else {
+		u32 d1 = scc_pciex_read_port(phb, port, 4 - mod);
+		u32 d2 = scc_pciex_read_port(phb, port + 1, mod);
+		data = d1 | (d2 << (mod * 8));
+	}
+	return data;
+}
+
+static void __scc_pciex_outb(struct pci_controller *phb,
+			     u8 val, unsigned long port)
+{
+	scc_pciex_write_port(phb, port, 1, (u32)val);
+}
+
+static void __scc_pciex_outw(struct pci_controller *phb,
+			     u16 val, unsigned long port)
+{
+	if ((port & 0x3ul) < 3)
+		scc_pciex_write_port(phb, port, 2, (u32)val);
+	else {
+		u32 d1 = val & 0x000000FF;
+		u32 d2 = (val & 0x0000FF00) >> 8;
+		scc_pciex_write_port(phb, port, 1, d1);
+		scc_pciex_write_port(phb, port + 1, 1, d2);
+	}
+}
+
+static void __scc_pciex_outl(struct pci_controller *phb,
+			     u32 val, unsigned long port)
+{
+	unsigned int mod = port & 0x3ul;
+	if (mod == 0)
+		scc_pciex_write_port(phb, port, 4, val);
+	else {
+		u32 d1 = val & (0xFFFFFFFFul >> (mod * 8));
+		u32 d2 = val >> ((4 - mod) * 8);
+		scc_pciex_write_port(phb, port, 4 - mod, d1);
+		scc_pciex_write_port(phb, port + 1, mod, d2);
+	}
+}
+
+#define PCIEX_PIO_FUNC(size, name)					\
+static u##size scc_pciex_in##name(unsigned long port)			\
+{									\
+	struct iowa_bus *bus = iowa_pio_find_bus(port);			\
+	u##size data = __scc_pciex_in##name(bus->phb, port);		\
+	scc_pciex_io_flush(bus);					\
+	return data;							\
+}									\
+static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
+{									\
+	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
+	u##size *dst = b;						\
+	for (; c != 0; c--, dst++)					\
+		*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
+	scc_pciex_io_flush(bus);					\
+}									\
+static void scc_pciex_out##name(u##size val, unsigned long port)	\
+{									\
+	struct iowa_bus *bus = iowa_pio_find_bus(port);			\
+	__scc_pciex_out##name(bus->phb, val, port);			\
+}									\
+static void scc_pciex_outs##name(unsigned long p, const void *b,	\
+				 unsigned long c)			\
+{									\
+	struct iowa_bus *bus = iowa_pio_find_bus(p);			\
+	const u##size *src = b;						\
+	for (; c != 0; c--, src++)					\
+		__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
+}
+#define cpu_to_le8(x) (x)
+#define le8_to_cpu(x) (x)
+PCIEX_PIO_FUNC(8, b)
+PCIEX_PIO_FUNC(16, w)
+PCIEX_PIO_FUNC(32, l)
+
+static struct ppc_pci_io scc_pciex_ops = {
+	.readb = scc_pciex_readb,
+	.readw = scc_pciex_readw,
+	.readl = scc_pciex_readl,
+	.readq = scc_pciex_readq,
+	.readw_be = scc_pciex_readw_be,
+	.readl_be = scc_pciex_readl_be,
+	.readq_be = scc_pciex_readq_be,
+	.readsb = scc_pciex_readsb,
+	.readsw = scc_pciex_readsw,
+	.readsl = scc_pciex_readsl,
+	.memcpy_fromio = scc_pciex_memcpy_fromio,
+	.inb = scc_pciex_inb,
+	.inw = scc_pciex_inw,
+	.inl = scc_pciex_inl,
+	.outb = scc_pciex_outb,
+	.outw = scc_pciex_outw,
+	.outl = scc_pciex_outl,
+	.insb = scc_pciex_insb,
+	.insw = scc_pciex_insw,
+	.insl = scc_pciex_insl,
+	.outsb = scc_pciex_outsb,
+	.outsw = scc_pciex_outsw,
+	.outsl = scc_pciex_outsl,
+};
+
+static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
+{
+	dma_addr_t dummy_page_da;
+	void *dummy_page_va;
+
+	dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!dummy_page_va) {
+		pr_err("PCIEX:Alloc dummy_page_va failed\n");
+		return -1;
+	}
+
+	dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
+				       PAGE_SIZE, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dummy_page_da)) {
+		pr_err("PCIEX:Map dummy page failed.\n");
+		kfree(dummy_page_va);
+		return -1;
+	}
+
+	PEX_OUT(bus->phb->cfg_addr, PEXDMRDADR0, dummy_page_da);
+
+	return 0;
+}
+
+/*
+ * config space access
+ */
+#define MK_PEXDADRS(bus_no, dev_no, func_no, addr) \
+	((uint32_t)(((addr) & ~0x3UL) | \
+	((bus_no) << PEXDADRS_BUSNO_SHIFT) | \
+	((dev_no)  << PEXDADRS_DEVNO_SHIFT) | \
+	((func_no) << PEXDADRS_FUNCNO_SHIFT)))
+
+#define MK_PEXDCMND_BYTE_EN(addr, size) \
+	((((0x1 << (size))-1) << ((addr) & 0x3)) << PEXDCMND_BYTE_EN_SHIFT)
+#define MK_PEXDCMND(cmd, addr, size) ((cmd) | MK_PEXDCMND_BYTE_EN(addr, size))
+
+static uint32_t config_read_pciex_dev(unsigned int *base,
+		uint64_t bus_no, uint64_t dev_no, uint64_t func_no,
+		uint64_t off, uint64_t size)
+{
+	uint32_t ret;
+	uint32_t addr, cmd;
+
+	addr = MK_PEXDADRS(bus_no, dev_no, func_no, off);
+	cmd = MK_PEXDCMND(PEXDCMND_CONFIG_READ, off, size);
+	PEX_OUT(base, PEXDADRS, addr);
+	PEX_OUT(base, PEXDCMND, cmd);
+	ret = (PEX_IN(base, PEXDRDATA)
+		>> ((off & (4-size)) * 8)) & ((0x1 << (size * 8)) - 1);
+	return ret;
+}
+
+static void config_write_pciex_dev(unsigned int *base, uint64_t bus_no,
+	uint64_t dev_no, uint64_t func_no, uint64_t off, uint64_t size,
+	uint32_t data)
+{
+	uint32_t addr, cmd;
+
+	addr = MK_PEXDADRS(bus_no, dev_no, func_no, off);
+	cmd = MK_PEXDCMND(PEXDCMND_CONFIG_WRITE, off, size);
+	PEX_OUT(base, PEXDADRS, addr);
+	PEX_OUT(base, PEXDCMND, cmd);
+	PEX_OUT(base, PEXDWDATA,
+		(data & ((0x1 << (size * 8)) - 1)) << ((off & (4-size)) * 8));
+}
+
+#define MK_PEXCADRS_BYTE_EN(off, len) \
+	((((0x1 << (len)) - 1) << ((off) & 0x3)) << PEXCADRS_BYTE_EN_SHIFT)
+#define MK_PEXCADRS(cmd, addr, size) \
+	((cmd) | MK_PEXCADRS_BYTE_EN(addr, size) | ((addr) & ~0x3))
+static uint32_t config_read_pciex_rc(unsigned int *base,
+				     uint32_t where, uint32_t size)
+{
+	PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_READ, where, size));
+	return (PEX_IN(base, PEXCRDATA)
+		>> ((where & (4 - size)) * 8)) & ((0x1 << (size * 8)) - 1);
+}
+
+static void config_write_pciex_rc(unsigned int *base, uint32_t where,
+				  uint32_t size, uint32_t val)
+{
+	uint32_t data;
+
+	data = (val & ((0x1 << (size * 8)) - 1)) << ((where & (4 - size)) * 8);
+	PEX_OUT(base, PEXCADRS, MK_PEXCADRS(PEXCADRS_CMD_WRITE, where, size));
+	PEX_OUT(base, PEXCWDATA, data);
+}
+
+/* Interfaces */
+/* Note: Work-around
+ *  On SCC PCIEXC, one device is seen on all 32 dev_no.
+ *  As SCC PCIEXC can have only one device on the bus, we look only one dev_no.
+ * (dev_no = 1)
+ */
+static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, unsigned int *val)
+{
+	struct device_node *dn;
+	struct pci_controller *phb;
+
+	dn = bus->sysdata;
+	phb = pci_find_hose_for_OF_device(dn);
+
+	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (bus->number == 0 && PCI_SLOT(devfn) == 0)
+		*val = config_read_pciex_rc(phb->cfg_addr, where, size);
+	else
+		*val = config_read_pciex_dev(phb->cfg_addr, bus->number,
+				PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int scc_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, unsigned int val)
+{
+	struct device_node *dn;
+	struct pci_controller *phb;
+
+	dn = bus->sysdata;
+	phb = pci_find_hose_for_OF_device(dn);
+
+	if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (bus->number == 0 && PCI_SLOT(devfn) == 0)
+		config_write_pciex_rc(phb->cfg_addr, where, size, val);
+	else
+		config_write_pciex_dev(phb->cfg_addr, bus->number,
+			PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops scc_pciex_pci_ops = {
+	scc_pciex_read_config,
+	scc_pciex_write_config,
+};
+
+static void pciex_clear_intr_all(unsigned int *base)
+{
+	PEX_OUT(base, PEXAERRSTS, 0xffffffff);
+	PEX_OUT(base, PEXPRERRSTS, 0xffffffff);
+	PEX_OUT(base, PEXINTSTS, 0xffffffff);
+}
+
+#if 0
+static void pciex_disable_intr_all(unsigned int *base)
+{
+	PEX_OUT(base, PEXINTMASK,   0x0);
+	PEX_OUT(base, PEXAERRMASK,  0x0);
+	PEX_OUT(base, PEXPRERRMASK, 0x0);
+	PEX_OUT(base, PEXVDMASK,    0x0);
+}
+#endif
+
+static void pciex_enable_intr_all(unsigned int *base)
+{
+	PEX_OUT(base, PEXINTMASK, 0x0000e7f1);
+	PEX_OUT(base, PEXAERRMASK, 0x03ff01ff);
+	PEX_OUT(base, PEXPRERRMASK, 0x0001010f);
+	PEX_OUT(base, PEXVDMASK, 0x00000001);
+}
+
+static void pciex_check_status(unsigned int *base)
+{
+	uint32_t err = 0;
+	uint32_t intsts, aerr, prerr, rcvcp, lenerr;
+	uint32_t maea, maec;
+
+	intsts = PEX_IN(base, PEXINTSTS);
+	aerr = PEX_IN(base, PEXAERRSTS);
+	prerr = PEX_IN(base, PEXPRERRSTS);
+	rcvcp = PEX_IN(base, PEXRCVCPLIDA);
+	lenerr = PEX_IN(base, PEXLENERRIDA);
+
+	if (intsts || aerr || prerr || rcvcp || lenerr)
+		err = 1;
+
+	pr_info("PCEXC interrupt!!\n");
+	pr_info("PEXINTSTS    :0x%08x\n", intsts);
+	pr_info("PEXAERRSTS   :0x%08x\n", aerr);
+	pr_info("PEXPRERRSTS  :0x%08x\n", prerr);
+	pr_info("PEXRCVCPLIDA :0x%08x\n", rcvcp);
+	pr_info("PEXLENERRIDA :0x%08x\n", lenerr);
+
+	/* print detail of Protection Error */
+	if (intsts & 0x00004000) {
+		uint32_t i, n;
+		for (i = 0; i < 4; i++) {
+			n = 1 << i;
+			if (prerr & n) {
+				maea = PEX_IN(base, PEXMAEA(i));
+				maec = PEX_IN(base, PEXMAEC(i));
+				pr_info("PEXMAEC%d     :0x%08x\n", i, maec);
+				pr_info("PEXMAEA%d     :0x%08x\n", i, maea);
+			}
+		}
+	}
+
+	if (err)
+		pciex_clear_intr_all(base);
+}
+
+static irqreturn_t pciex_handle_internal_irq(int irq, void *dev_id)
+{
+	struct pci_controller *phb = dev_id;
+
+	pr_debug("PCIEX:pciex_handle_internal_irq(irq=%d)\n", irq);
+
+	BUG_ON(phb->cfg_addr == NULL);
+
+	pciex_check_status(phb->cfg_addr);
+
+	return IRQ_HANDLED;
+}
+
+static __init int celleb_setup_pciex(struct device_node *node,
+				     struct pci_controller *phb)
+{
+	struct resource	r;
+	struct of_irq oirq;
+	int virq;
+
+	/* SMMIO registers; used inside this file */
+	if (of_address_to_resource(node, 0, &r)) {
+		pr_err("PCIEXC:Failed to get config resource.\n");
+		return 1;
+	}
+	phb->cfg_addr = ioremap(r.start, r.end - r.start + 1);
+	if (!phb->cfg_addr) {
+		pr_err("PCIEXC:Failed to remap SMMIO region.\n");
+		return 1;
+	}
+
+	/* Not use cfg_data,  cmd and data regs are near address reg */
+	phb->cfg_data = NULL;
+
+	/* set pci_ops */
+	phb->ops = &scc_pciex_pci_ops;
+
+	/* internal interrupt handler */
+	if (of_irq_map_one(node, 1, &oirq)) {
+		pr_err("PCIEXC:Failed to map irq\n");
+		goto error;
+	}
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+	if (request_irq(virq, pciex_handle_internal_irq,
+			IRQF_DISABLED, "pciex", (void *)phb)) {
+		pr_err("PCIEXC:Failed to request irq\n");
+		goto error;
+	}
+
+	/* enable all interrupts */
+	pciex_clear_intr_all(phb->cfg_addr);
+	pciex_enable_intr_all(phb->cfg_addr);
+	/* MSI: TBD */
+
+	return 0;
+
+error:
+	phb->cfg_data = NULL;
+	if (phb->cfg_addr)
+		iounmap(phb->cfg_addr);
+	phb->cfg_addr = NULL;
+	return 1;
+}
+
+struct celleb_phb_spec celleb_pciex_spec __initdata = {
+	.setup = celleb_setup_pciex,
+	.ops = &scc_pciex_ops,
+	.iowa_init = &scc_pciex_iowa_init,
+};