Skip to content

L
linux
Commit 8873aaa6 authored by Alan Cox's avatar Alan Cox Committed by Greg Kroah-Hartman
Browse files
Options

USB: cypress_m8: Speed handling 

The recent changes to this driver cleaned it up a lot, follow that up
by sorting the speed side of things out as well
Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 25b70a86
Show whitespace changes
Inline Side-by-side
Showing with 29 additions and 140 deletions
drivers/usb/serial/cypress_m8.c
View file @ 8873aaa6
......@@ -147,7 +147,6 @@ struct cypress_private {
enum packet_format pkt_fmt; /* format to use for packet send / receive */
int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
int baud_rate; /* stores current baud rate in integer form */
int cbr_mask; /* stores current baud rate in masked form */
int isthrottled; /* if throttled, discard reads */
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
......@@ -183,9 +182,6 @@ static void cypress_unthrottle (struct usb_serial_port *port);
static void cypress_set_dead (struct usb_serial_port *port);
static void cypress_read_int_callback (struct urb *urb);
static void cypress_write_int_callback (struct urb *urb);
/* baud helper functions */
static int mask_to_rate (unsigned mask);
static unsigned rate_to_mask (int rate);
/* write buffer functions */
static struct cypress_buf *cypress_buf_alloc(unsigned int size);
static void cypress_buf_free(struct cypress_buf *cb);
......@@ -291,9 +287,8 @@ static struct usb_serial_driver cypress_ca42v2_device = {
*****************************************************************************/
static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask)
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
int new_rate;
struct cypress_private *priv;
priv = usb_get_serial_port_data(port);
......@@ -306,12 +301,6 @@ static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask)
* The Cypress HID->COM device will work successfully up to
* 115200bps (but the actual throughput is around 3kBps).
*/
new_rate = mask_to_rate(baud_mask);
if (new_rate < 0) {
dbg("%s - failed setting baud rate, untranslatable speed",
__func__);
return -1;
}
if (port->serial->dev->speed == USB_SPEED_LOW) {
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
......@@ -345,7 +334,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask)
/* This function can either set or retrieve the current serial line settings */
static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits,
int parity_enable, int parity_type, int reset, int cypress_request_type)
{
int new_baudrate = 0, retval = 0, tries = 0;
......@@ -363,9 +352,13 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
switch(cypress_request_type) {
case CYPRESS_SET_CONFIG:
new_baudrate = priv->baud_rate;
if (baud_mask != priv->cbr_mask) {
/* 0 means 'Hang up' so doesn't change the true bit rate */
if (baud_rate == 0)
new_baudrate = priv->baud_rate;
/* Change of speed ? */
else if (baud_rate != priv->baud_rate) {
dbg("%s - baud rate is changing", __FUNCTION__);
retval = analyze_baud_rate(port, baud_mask);
retval = analyze_baud_rate(port, baud_rate);
if (retval >= 0) {
new_baudrate = retval;
dbg("%s - New baud rate set to %d",
......@@ -410,9 +403,12 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
} else {
spin_lock_irqsave(&priv->lock, flags);
priv->baud_rate = new_baudrate;
priv->cbr_mask = baud_mask;
priv->current_config = feature_buffer[4];
spin_unlock_irqrestore(&priv->lock, flags);
/* If we asked for a speed change encode it */
if (baud_rate)
tty_encode_baud_rate(port->tty,
new_baudrate, new_baudrate);
}
break;
case CYPRESS_GET_CONFIG:
......@@ -450,9 +446,6 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
/* store the config in one byte, and later use bit masks to check values */
priv->current_config = feature_buffer[4];
priv->baud_rate = *((u_int32_t *)feature_buffer);
if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
spin_unlock_irqrestore(&priv->lock, flags);
}
}
......@@ -482,51 +475,6 @@ static void cypress_set_dead(struct usb_serial_port *port)
}
/* given a baud mask, it will return integer baud on success */
static int mask_to_rate (unsigned mask)
{
int rate;
switch (mask) {
case B0: rate = 0; break;
case B300: rate = 300; break;
case B600: rate = 600; break;
case B1200: rate = 1200; break;
case B2400: rate = 2400; break;
case B4800: rate = 4800; break;
case B9600: rate = 9600; break;
case B19200: rate = 19200; break;
case B38400: rate = 38400; break;
case B57600: rate = 57600; break;
case B115200: rate = 115200; break;
default: rate = -1;
}
return rate;
}
static unsigned rate_to_mask (int rate)
{
unsigned mask;
switch (rate) {
case 0: mask = B0; break;
case 300: mask = B300; break;
case 600: mask = B600; break;
case 1200: mask = B1200; break;
case 2400: mask = B2400; break;
case 4800: mask = B4800; break;
case 9600: mask = B9600; break;
case 19200: mask = B19200; break;
case 38400: mask = B38400; break;
case 57600: mask = B57600; break;
case 115200: mask = B115200; break;
default: mask = 0x40;
}
return mask;
}
/*****************************************************************************
* Cypress serial driver functions
*****************************************************************************/
......@@ -558,7 +506,6 @@ static int generic_startup (struct usb_serial *serial)
priv->line_control = 0;
priv->termios_initialized = 0;
priv->rx_flags = 0;
priv->cbr_mask = B300;
/* Default packet format setting is determined by packet size.
Anything with a size larger then 9 must have a separate
count field since the 3 bit count field is otherwise too
......@@ -1004,9 +951,9 @@ static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
priv->line_control &= ~CONTROL_RTS;
if (clear & TIOCM_DTR)
priv->line_control &= ~CONTROL_DTR;
priv->cmd_ctrl = 1;
spin_unlock_irqrestore(&priv->lock, flags);
priv->cmd_ctrl = 1;
return cypress_write(port, NULL, 0);
}
......@@ -1018,20 +965,6 @@ static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsi
dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
switch (cmd) {
case TIOCGSERIAL:
if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
return -EFAULT;
}
return (0);
break;
case TIOCSSERIAL:
if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
return -EFAULT;
}
/* here we need to call cypress_set_termios to invoke the new settings */
cypress_set_termios(port, &priv->tmp_termios);
return (0);
break;
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
while (priv != NULL) {
......@@ -1079,7 +1012,7 @@ static void cypress_set_termios (struct usb_serial_port *port,
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
int data_bits, stop_bits, parity_type, parity_enable;
unsigned cflag, iflag, baud_mask;
unsigned cflag, iflag;
unsigned long flags;
__u8 oldlines;
int linechange = 0;
......@@ -1087,10 +1020,6 @@ static void cypress_set_termios (struct usb_serial_port *port,
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
if ((!tty) || (!tty->termios)) {
dbg("%s - no tty structures", __FUNCTION__);
return;
}
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
......@@ -1098,40 +1027,37 @@ static void cypress_set_termios (struct usb_serial_port *port,
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
CLOCAL;
tty->termios->c_ispeed = 4800;
tty->termios->c_ospeed = 4800;
} else if (priv->chiptype == CT_CYPHIDCOM) {
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
tty->termios->c_ispeed = 9600;
tty->termios->c_ospeed = 9600;
} else if (priv->chiptype == CT_CA42V2) {
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
tty->termios->c_ispeed = 9600;
tty->termios->c_ospeed = 9600;
}
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* Unsupported features need clearing */
tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
cflag = tty->termios->c_cflag;
iflag = tty->termios->c_iflag;
/* check if there are new settings */
if (old_termios) {
if ((cflag != old_termios->c_cflag) ||
(RELEVANT_IFLAG(iflag) !=
RELEVANT_IFLAG(old_termios->c_iflag))) {
dbg("%s - attempting to set new termios settings",
__FUNCTION__);
/* should make a copy of this in case something goes
* wrong in the function, we can restore it */
spin_lock_irqsave(&priv->lock, flags);
priv->tmp_termios = *(tty->termios);
spin_unlock_irqrestore(&priv->lock, flags);
} else {
dbg("%s - nothing to do, exiting", __FUNCTION__);
return;
}
} else
return;
/* set number of data bits, parity, stop bits */
/* when parity is disabled the parity type bit is ignored */
......@@ -1173,53 +1099,16 @@ static void cypress_set_termios (struct usb_serial_port *port,
if ((cflag & CBAUD) == B0) {
/* drop dtr and rts */
dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
baud_mask = B0;
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
} else {
baud_mask = (cflag & CBAUD);
switch(baud_mask) {
case B300:
dbg("%s - setting baud 300bps", __FUNCTION__);
break;
case B600:
dbg("%s - setting baud 600bps", __FUNCTION__);
break;
case B1200:
dbg("%s - setting baud 1200bps", __FUNCTION__);
break;
case B2400:
dbg("%s - setting baud 2400bps", __FUNCTION__);
break;
case B4800:
dbg("%s - setting baud 4800bps", __FUNCTION__);
break;
case B9600:
dbg("%s - setting baud 9600bps", __FUNCTION__);
break;
case B19200:
dbg("%s - setting baud 19200bps", __FUNCTION__);
break;
case B38400:
dbg("%s - setting baud 38400bps", __FUNCTION__);
break;
case B57600:
dbg("%s - setting baud 57600bps", __FUNCTION__);
break;
case B115200:
dbg("%s - setting baud 115200bps", __FUNCTION__);
break;
default:
dbg("%s - unknown masked baud rate", __FUNCTION__);
}
} else
priv->line_control = (CONTROL_DTR | CONTROL_RTS);
}
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
"%d data_bits (+5)", __FUNCTION__, stop_bits,
parity_enable, parity_type, data_bits);
cypress_serial_control(port, baud_mask, data_bits, stop_bits,
cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits,
parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
/* we perform a CYPRESS_GET_CONFIG so that the current settings are
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7