Skip to content

L
linux
Commit 8a212ab6 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

parents 1f419cad 0e1f6060
Hide whitespace changes
Inline Side-by-side
Showing with 4172 additions and 1303 deletions
arch/ia64/Kconfig
View file @ 8a212ab6
......@@ -63,8 +63,6 @@ config IA64_GENERIC
select ACPI
select NUMA
select ACPI_NUMA
select VIRTUAL_MEM_MAP
select DISCONTIGMEM
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
......@@ -176,40 +174,6 @@ config IA64_L1_CACHE_SHIFT
default "6" if ITANIUM
# align cache-sensitive data to 64 bytes
config NUMA
bool "NUMA support"
depends on !IA64_HP_SIM
default y if IA64_SGI_SN2
select ACPI_NUMA
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
server systems. If in doubt, say N.
config VIRTUAL_MEM_MAP
bool "Virtual mem map"
default y if !IA64_HP_SIM
help
Say Y to compile the kernel with support for a virtual mem map.
This code also only takes effect if a memory hole of greater than
1 Gb is found during boot. You must turn this option on if you
require the DISCONTIGMEM option for your machine. If you are
unsure, say Y.
config HOLES_IN_ZONE
bool
default y if VIRTUAL_MEM_MAP
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous memory support"
depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
......@@ -232,8 +196,10 @@ config IA64_SGI_SN_XP
based on a network adapter and DMA messaging.
config FORCE_MAX_ZONEORDER
int
default "18"
int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
range 11 17 if !HUGETLB_PAGE
default "17" if HUGETLB_PAGE
default "11"
config SMP
bool "Symmetric multi-processing support"
......@@ -254,8 +220,8 @@ config SMP
If you don't know what to do here, say N.
config NR_CPUS
int "Maximum number of CPUs (2-512)"
range 2 512
int "Maximum number of CPUs (2-1024)"
range 2 1024
depends on SMP
default "64"
help
......@@ -298,6 +264,58 @@ config PREEMPT
source "mm/Kconfig"
config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config ARCH_FLATMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
config ARCH_DISCONTIGMEM_DEFAULT
def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
depends on ARCH_DISCONTIGMEM_ENABLE
config NUMA
bool "NUMA support"
depends on !IA64_HP_SIM && !FLATMEM
default y if IA64_SGI_SN2
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
server systems. If in doubt, say N.
# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
# VIRTUAL_MEM_MAP has been retained for historical reasons.
config VIRTUAL_MEM_MAP
bool "Virtual mem map"
depends on !SPARSEMEM
default y if !IA64_HP_SIM
help
Say Y to compile the kernel with support for a virtual mem map.
This code also only takes effect if a memory hole of greater than
1 Gb is found during boot. You must turn this option on if you
require the DISCONTIGMEM option for your machine. If you are
unsure, say Y.
config HOLES_IN_ZONE
bool
default y if VIRTUAL_MEM_MAP
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool y
depends on NEED_MULTIPLE_NODES
config IA32_SUPPORT
bool "Support for Linux/x86 binaries"
help
......
arch/ia64/configs/bigsur_defconfig
View file @ 8a212ab6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Mon Nov 29 13:27:48 2004
# Linux kernel version: 2.6.14-rc1
# Wed Sep 14 15:18:49 2005
#
#
......@@ -10,34 +10,40 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
......@@ -58,12 +64,15 @@ CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
CONFIG_ITANIUM=y
......@@ -72,17 +81,30 @@ CONFIG_ITANIUM=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
......@@ -95,6 +117,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
......@@ -102,18 +125,26 @@ CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_ACPI=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
......@@ -122,7 +153,7 @@ CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
......@@ -135,8 +166,70 @@ CONFIG_PCI_NAMES=y
# CONFIG_PCCARD is not set
#
# PC-card bridges
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -150,6 +243,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
......@@ -163,7 +261,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
......@@ -172,14 +276,15 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
......@@ -189,6 +294,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -211,7 +317,8 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
......@@ -233,6 +340,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
......@@ -250,6 +358,7 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
......@@ -261,6 +370,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
......@@ -274,6 +384,8 @@ CONFIG_SCSI_LOGGING=y
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
......@@ -288,18 +400,13 @@ CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
......@@ -309,7 +416,8 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
......@@ -332,11 +440,14 @@ CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
......@@ -349,78 +460,25 @@ CONFIG_DM_ZERO=m
# CONFIG_I2O is not set
#
# Networking support
# Network device support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -443,7 +501,6 @@ CONFIG_NET_PCI=y
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
......@@ -465,13 +522,17 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -496,6 +557,8 @@ CONFIG_EEPRO100=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
......@@ -524,18 +587,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
......@@ -553,6 +604,17 @@ CONFIG_MOUSE_PS2=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
......@@ -571,7 +633,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
......@@ -579,6 +640,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -603,14 +665,22 @@ CONFIG_EFI_RTC=y
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_DRM=y
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
......@@ -635,7 +705,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
......@@ -651,16 +721,43 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
# Miscellaneous I2C Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
......@@ -671,33 +768,26 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
# Misc devices
#
# CONFIG_W1 is not set
#
# Misc devices
# Multimedia Capabilities Port drivers
#
#
......@@ -752,11 +842,12 @@ CONFIG_SND_OPL3_LIB=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -768,6 +859,8 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
......@@ -775,9 +868,10 @@ CONFIG_SND_CS4281=m
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
......@@ -791,13 +885,14 @@ CONFIG_SND_CS4281=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
......@@ -807,6 +902,8 @@ CONFIG_SND_CS4281=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
......@@ -818,35 +915,38 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
......@@ -863,19 +963,23 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
......@@ -894,6 +998,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
......@@ -909,7 +1014,6 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
......@@ -918,10 +1022,12 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
# USB DSL modem support
#
#
......@@ -929,11 +1035,26 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
......@@ -945,17 +1066,20 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -982,14 +1106,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1013,15 +1134,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
......@@ -1031,9 +1155,11 @@ CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1103,8 +1229,12 @@ CONFIG_NLS_UTF8=m
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
......@@ -1115,14 +1245,20 @@ CONFIG_OPROFILE=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_KPROBES is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
......@@ -1149,6 +1285,7 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
......@@ -1164,3 +1301,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
arch/ia64/configs/gensparse_defconfig 0 → 100644
View file @ 8a212ab6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc2
# Wed Sep 28 08:27:29 2005
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Power management and ACPI
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
CONFIG_SCSI_SATA_VITESSE=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_STALDRV is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
#
# SN Devices
#
CONFIG_SGI_IOC4=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
arch/ia64/configs/tiger_defconfig
View file @ 8a212ab6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc6-tiger-smp
# Wed Aug 17 10:19:51 2005
# Linux kernel version: 2.6.14-rc1
# Wed Sep 14 15:17:57 2005
#
#
......@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
......@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
......@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
......@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
......@@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_ACPI=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_HOTPLUG_CPU is not set
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
......@@ -144,7 +155,6 @@ CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -188,13 +198,18 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
......@@ -218,9 +233,11 @@ CONFIG_TCP_CONG_BIC=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -234,6 +251,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
......@@ -247,7 +269,13 @@ CONFIG_FW_LOADER=m
#
# Plug and Play support
#
# CONFIG_PNP is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
......@@ -266,7 +294,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
......@@ -299,7 +326,8 @@ CONFIG_BLK_DEV_IDESCSI=m
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
......@@ -339,6 +367,7 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
......@@ -366,6 +395,7 @@ CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
......@@ -454,12 +484,18 @@ CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -481,6 +517,7 @@ CONFIG_TULIP=m
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
......@@ -512,6 +549,7 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -521,6 +559,7 @@ CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -618,6 +657,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
......@@ -675,6 +715,7 @@ CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
......@@ -691,7 +732,6 @@ CONFIG_MAX_RAW_DEVS=256
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
......@@ -702,12 +742,17 @@ CONFIG_MAX_RAW_DEVS=256
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -800,9 +845,11 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
......@@ -902,16 +949,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
......@@ -919,6 +962,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -947,13 +991,11 @@ CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1003,6 +1045,7 @@ CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1072,10 +1115,12 @@ CONFIG_NLS_UTF8=m
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
......@@ -1089,6 +1134,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......
arch/ia64/configs/zx1_defconfig
View file @ 8a212ab6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13-rc6
# Wed Aug 17 10:02:43 2005
# Linux kernel version: 2.6.14-rc1
# Wed Sep 14 15:15:01 2005
#
#
......@@ -18,6 +18,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
......@@ -29,6 +30,7 @@ CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
......@@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
......@@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
......@@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_ACPI=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
......@@ -143,7 +154,6 @@ CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -187,8 +197,8 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
......@@ -204,13 +214,17 @@ CONFIG_NETFILTER=y
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
......@@ -234,9 +248,11 @@ CONFIG_IP_NF_ARPTABLES=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -250,6 +266,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
......@@ -263,7 +284,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
......@@ -282,7 +309,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
......@@ -315,7 +341,8 @@ CONFIG_BLK_DEV_IDECD=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
......@@ -354,6 +381,7 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
......@@ -381,6 +409,7 @@ CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
......@@ -457,12 +486,18 @@ CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -485,6 +520,7 @@ CONFIG_TULIP_NAPI_HW_MITIGATION=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
......@@ -516,6 +552,7 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -525,6 +562,7 @@ CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -650,12 +688,12 @@ CONFIG_AGP=y
CONFIG_AGP_HP_ZX1=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
......@@ -689,7 +727,6 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
......@@ -703,7 +740,6 @@ CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_SENSOR is not set
#
# Miscellaneous I2C Chip support
......@@ -730,11 +766,16 @@ CONFIG_I2C_ALGOPCF=y
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -806,6 +847,7 @@ CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_S1D13XXX is not set
......@@ -862,11 +904,12 @@ CONFIG_SND_OPL3_LIB=y
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -890,7 +933,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
......@@ -952,9 +995,8 @@ CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
......@@ -971,6 +1013,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
......@@ -987,9 +1030,11 @@ CONFIG_USB_HIDDEV=y
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
......@@ -1088,10 +1133,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
......@@ -1100,6 +1141,7 @@ CONFIG_FS_MBCACHE=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -1126,13 +1168,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1177,6 +1217,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1246,10 +1287,12 @@ CONFIG_NLS_UTF8=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
......@@ -1263,6 +1306,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......
arch/ia64/defconfig
View file @ 8a212ab6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12
# Tue Jun 21 11:30:42 2005
# Linux kernel version: 2.6.14-rc1
# Wed Sep 14 15:13:03 2005
#
#
......@@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
......@@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
......@@ -80,6 +82,10 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_NUMA=y
CONFIG_VIRTUAL_MEM_MAP=y
......@@ -87,12 +93,21 @@ CONFIG_HOLES_IN_ZONE=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
......@@ -105,6 +120,7 @@ CONFIG_IA64_PALINFO=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
......@@ -112,22 +128,29 @@ CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_ACPI=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
#
......@@ -135,7 +158,6 @@ CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
......@@ -147,12 +169,80 @@ CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
......@@ -162,9 +252,14 @@ CONFIG_HOTPLUG_PCI_ACPI=m
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
......@@ -178,7 +273,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
......@@ -197,7 +298,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
......@@ -230,7 +330,8 @@ CONFIG_BLK_DEV_IDESCSI=m
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
......@@ -252,6 +353,7 @@ CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
......@@ -270,6 +372,7 @@ CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
......@@ -297,6 +400,7 @@ CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
......@@ -314,6 +418,7 @@ CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
......@@ -335,7 +440,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
......@@ -344,6 +448,7 @@ CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
......@@ -390,80 +495,25 @@ CONFIG_FUSION_MAX_SGE=128
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# Network device support
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
......@@ -485,6 +535,7 @@ CONFIG_TULIP=m
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
......@@ -516,6 +567,7 @@ CONFIG_E1000=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
......@@ -525,6 +577,7 @@ CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
......@@ -549,6 +602,10 @@ CONFIG_TIGON3=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
......@@ -607,9 +664,7 @@ CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461X is not set
#
# Character devices
......@@ -620,6 +675,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
......@@ -641,7 +697,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
......@@ -650,8 +705,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -684,6 +739,8 @@ CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
......@@ -707,10 +764,21 @@ CONFIG_MMTIMER=y
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
......@@ -753,6 +821,7 @@ CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
......@@ -764,11 +833,12 @@ CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
......@@ -790,9 +860,10 @@ CONFIG_SND_EMU10K1=m
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
......@@ -844,6 +915,7 @@ CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
......@@ -853,9 +925,8 @@ CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
......@@ -888,12 +959,17 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
......@@ -918,7 +994,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m
CONFIG_USB_MON=y
#
# USB port drivers
......@@ -944,10 +1020,11 @@ CONFIG_USB_MON=m
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
# USB DSL modem support
#
#
......@@ -964,6 +1041,8 @@ CONFIG_USB_MON=m
# InfiniBand support
#
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
......@@ -981,6 +1060,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
......@@ -996,22 +1076,20 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -1040,14 +1118,11 @@ CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1071,15 +1146,18 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
......@@ -1094,6 +1172,7 @@ CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1163,10 +1242,12 @@ CONFIG_NLS_UTF8=m
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
......@@ -1187,6 +1268,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
......@@ -1194,6 +1276,7 @@ CONFIG_LOG_BUF_SHIFT=20
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
......@@ -1215,7 +1298,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
......
arch/ia64/hp/common/hwsw_iommu.c
View file @ 8a212ab6
......@@ -17,7 +17,7 @@
#include <asm/machvec.h>
/* swiotlb declarations & definitions: */
extern void swiotlb_init_with_default_size (size_t size);
extern int swiotlb_late_init_with_default_size (size_t size);
extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
extern ia64_mv_dma_map_single swiotlb_map_single;
......@@ -67,7 +67,16 @@ void
hwsw_init (void)
{
/* default to a smallish 2MB sw I/O TLB */
swiotlb_init_with_default_size (2 * (1<<20));
if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) {
#ifdef CONFIG_IA64_GENERIC
/* Better to have normal DMA than panic */
printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
" reverting to hpzx1 platform vector\n", __FUNCTION__);
machvec_init("hpzx1");
#else
panic("Unable to initialize software I/O TLB services");
#endif
}
}
void *
......
arch/ia64/hp/common/sba_iommu.c
View file @ 8a212ab6
......@@ -2028,9 +2028,40 @@ static struct acpi_driver acpi_sba_ioc_driver = {
static int __init
sba_init(void)
{
if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
return 0;
acpi_bus_register_driver(&acpi_sba_ioc_driver);
if (!ioc_list)
if (!ioc_list) {
#ifdef CONFIG_IA64_GENERIC
extern int swiotlb_late_init_with_default_size (size_t size);
/*
* If we didn't find something sba_iommu can claim, we
* need to setup the swiotlb and switch to the dig machvec.
*/
if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
panic("Unable to find SBA IOMMU or initialize "
"software I/O TLB: Try machvec=dig boot option");
machvec_init("dig");
#else
panic("Unable to find SBA IOMMU: Try a generic or DIG kernel");
#endif
return 0;
}
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
/*
* hpzx1_swiotlb needs to have a fairly small swiotlb bounce
* buffer setup to support devices with smaller DMA masks than
* sba_iommu can handle.
*/
if (ia64_platform_is("hpzx1_swiotlb")) {
extern void hwsw_init(void);
hwsw_init();
}
#endif
#ifdef CONFIG_PCI
{
......@@ -2048,18 +2079,6 @@ sba_init(void)
subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
extern void dig_setup(char**);
/*
* MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
* so we use the platform_setup hook to fix it up.
*/
void __init
sba_setup(char **cmdline_p)
{
MAX_DMA_ADDRESS = ~0UL;
dig_setup(cmdline_p);
}
static int __init
nosbagart(char *str)
{
......
arch/ia64/hp/sim/simscsi.c
View file @ 8a212ab6
......@@ -205,10 +205,11 @@ simscsi_get_disk_size (int fd)
char buf[512];
/*
* This is a bit kludgey: the simulator doesn't provide a direct way of determining
* the disk size, so we do a binary search, assuming a maximum disk size of 4GB.
* This is a bit kludgey: the simulator doesn't provide a
* direct way of determining the disk size, so we do a binary
* search, assuming a maximum disk size of 128GB.
*/
for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) {
for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
req.addr = __pa(&buf);
req.len = sizeof(buf);
ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
......@@ -225,8 +226,10 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
{
unsigned long offset;
offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
| (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512;
offset = (((unsigned long)sc->cmnd[2] << 24)
| ((unsigned long)sc->cmnd[3] << 16)
| ((unsigned long)sc->cmnd[4] << 8)
| ((unsigned long)sc->cmnd[5] << 0))*512UL;
if (sc->use_sg > 0)
simscsi_sg_readwrite(sc, mode, offset);
else
......
arch/ia64/kernel/acpi.c
View file @ 8a212ab6
......@@ -838,7 +838,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
#ifdef CONFIG_ACPI_NUMA
acpi_status __devinit
static acpi_status __devinit
acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
......@@ -890,7 +890,16 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
map_iosapic_to_node(gsi_base, node);
return AE_OK;
}
#endif /* CONFIG_NUMA */
static int __init
acpi_map_iosapics (void)
{
acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
return 0;
}
fs_initcall(acpi_map_iosapics);
#endif /* CONFIG_ACPI_NUMA */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
{
......
arch/ia64/kernel/efi.c
View file @ 8a212ab6
......@@ -239,57 +239,30 @@ is_available_memory (efi_memory_desc_t *md)
return 0;
}
/*
* Trim descriptor MD so its starts at address START_ADDR. If the descriptor covers
* memory that is normally available to the kernel, issue a warning that some memory
* is being ignored.
*/
static void
trim_bottom (efi_memory_desc_t *md, u64 start_addr)
{
u64 num_skipped_pages;
typedef struct kern_memdesc {
u64 attribute;
u64 start;
u64 num_pages;
} kern_memdesc_t;
if (md->phys_addr >= start_addr || !md->num_pages)
return;
num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
if (num_skipped_pages > md->num_pages)
num_skipped_pages = md->num_pages;
if (is_available_memory(md))
printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
"at 0x%lx\n", __FUNCTION__,
(num_skipped_pages << EFI_PAGE_SHIFT) >> 10,
md->phys_addr, start_addr - IA64_GRANULE_SIZE);
/*
* NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory
* descriptor list to become unsorted. In such a case, md->num_pages will be
* zero, so the Right Thing will happen.
*/
md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT;
md->num_pages -= num_skipped_pages;
}
static kern_memdesc_t *kern_memmap;
static void
trim_top (efi_memory_desc_t *md, u64 end_addr)
walk (efi_freemem_callback_t callback, void *arg, u64 attr)
{
u64 num_dropped_pages, md_end_addr;
md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
if (md_end_addr <= end_addr || !md->num_pages)
return;
kern_memdesc_t *k;
u64 start, end, voff;
num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT;
if (num_dropped_pages > md->num_pages)
num_dropped_pages = md->num_pages;
if (is_available_memory(md))
printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
"at 0x%lx\n", __FUNCTION__,
(num_dropped_pages << EFI_PAGE_SHIFT) >> 10,
md->phys_addr, end_addr);
md->num_pages -= num_dropped_pages;
voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET;
for (k = kern_memmap; k->start != ~0UL; k++) {
if (k->attribute != attr)
continue;
start = PAGE_ALIGN(k->start);
end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK;
if (start < end)
if ((*callback)(start + voff, end + voff, arg) < 0)
return;
}
}
/*
......@@ -299,148 +272,19 @@ trim_top (efi_memory_desc_t *md, u64 end_addr)
void
efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
{
int prev_valid = 0;
struct range {
u64 start;
u64 end;
} prev, curr;
void *efi_map_start, *efi_map_end, *p, *q;
efi_memory_desc_t *md, *check_md;
u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0;
unsigned long total_mem = 0;
efi_map_start = __va(ia64_boot_param->efi_memmap);
efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
efi_desc_size = ia64_boot_param->efi_memdesc_size;
for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
md = p;
/* skip over non-WB memory descriptors; that's all we're interested in... */
if (!(md->attribute & EFI_MEMORY_WB))
continue;
/*
* granule_addr is the base of md's first granule.
* [granule_addr - first_non_wb_addr) is guaranteed to
* be contiguous WB memory.
*/
granule_addr = GRANULEROUNDDOWN(md->phys_addr);
first_non_wb_addr = max(first_non_wb_addr, granule_addr);
if (first_non_wb_addr < md->phys_addr) {
trim_bottom(md, granule_addr + IA64_GRANULE_SIZE);
granule_addr = GRANULEROUNDDOWN(md->phys_addr);
first_non_wb_addr = max(first_non_wb_addr, granule_addr);
}
for (q = p; q < efi_map_end; q += efi_desc_size) {
check_md = q;
if ((check_md->attribute & EFI_MEMORY_WB) &&
(check_md->phys_addr == first_non_wb_addr))
first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT;
else
break; /* non-WB or hole */
}
last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr);
if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT))
trim_top(md, last_granule_addr);
if (is_available_memory(md)) {
if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) {
if (md->phys_addr >= max_addr)
continue;
md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
first_non_wb_addr = max_addr;
}
if (total_mem >= mem_limit)
continue;
if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
unsigned long limit_addr = md->phys_addr;
limit_addr += mem_limit - total_mem;
limit_addr = GRANULEROUNDDOWN(limit_addr);
if (md->phys_addr > limit_addr)
continue;
md->num_pages = (limit_addr - md->phys_addr) >>
EFI_PAGE_SHIFT;
first_non_wb_addr = max_addr = md->phys_addr +
(md->num_pages << EFI_PAGE_SHIFT);
}
total_mem += (md->num_pages << EFI_PAGE_SHIFT);
if (md->num_pages == 0)
continue;
curr.start = PAGE_OFFSET + md->phys_addr;
curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
if (!prev_valid) {
prev = curr;
prev_valid = 1;
} else {
if (curr.start < prev.start)
printk(KERN_ERR "Oops: EFI memory table not ordered!\n");
if (prev.end == curr.start) {
/* merge two consecutive memory ranges */
prev.end = curr.end;
} else {
start = PAGE_ALIGN(prev.start);
end = prev.end & PAGE_MASK;
if ((end > start) && (*callback)(start, end, arg) < 0)
return;
prev = curr;
}
}
}
}
if (prev_valid) {
start = PAGE_ALIGN(prev.start);
end = prev.end & PAGE_MASK;
if (end > start)
(*callback)(start, end, arg);
}
walk(callback, arg, EFI_MEMORY_WB);
}
/*
* Walk the EFI memory map to pull out leftover pages in the lower
* memory regions which do not end up in the regular memory map and
* stick them into the uncached allocator
*
* The regular walk function is significantly more complex than the
* uncached walk which means it really doesn't make sense to try and
* marge the two.
* Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that
* has memory that is available for uncached allocator.
*/
void __init
efi_memmap_walk_uc (efi_freemem_callback_t callback)
void
efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg)
{
void *efi_map_start, *efi_map_end, *p;
efi_memory_desc_t *md;
u64 efi_desc_size, start, end;
efi_map_start = __va(ia64_boot_param->efi_memmap);
efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
efi_desc_size = ia64_boot_param->efi_memdesc_size;
for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
md = p;
if (md->attribute == EFI_MEMORY_UC) {
start = PAGE_ALIGN(md->phys_addr);
end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK);
if ((*callback)(start, end, NULL) < 0)
return;
}
}
walk(callback, arg, EFI_MEMORY_UC);
}
/*
* Look for the PAL_CODE region reported by EFI and maps it using an
* ITR to enable safe PAL calls in virtual mode. See IA-64 Processor
......@@ -862,3 +706,307 @@ efi_uart_console_only(void)
printk(KERN_ERR "Malformed %s value\n", name);
return 0;
}
#define efi_md_size(md) (md->num_pages << EFI_PAGE_SHIFT)
static inline u64
kmd_end(kern_memdesc_t *kmd)
{
return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT));
}
static inline u64
efi_md_end(efi_memory_desc_t *md)
{
return (md->phys_addr + efi_md_size(md));
}
static inline int
efi_wb(efi_memory_desc_t *md)
{
return (md->attribute & EFI_MEMORY_WB);
}
static inline int
efi_uc(efi_memory_desc_t *md)
{
return (md->attribute & EFI_MEMORY_UC);
}
/*
* Look for the first granule aligned memory descriptor memory
* that is big enough to hold EFI memory map. Make sure this
* descriptor is atleast granule sized so it does not get trimmed
*/
struct kern_memdesc *
find_memmap_space (void)
{
u64 contig_low=0, contig_high=0;
u64 as = 0, ae;
void *efi_map_start, *efi_map_end, *p, *q;
efi_memory_desc_t *md, *pmd = NULL, *check_md;
u64 space_needed, efi_desc_size;
unsigned long total_mem = 0;
efi_map_start = __va(ia64_boot_param->efi_memmap);
efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
efi_desc_size = ia64_boot_param->efi_memdesc_size;
/*
* Worst case: we need 3 kernel descriptors for each efi descriptor
* (if every entry has a WB part in the middle, and UC head and tail),
* plus one for the end marker.
*/
space_needed = sizeof(kern_memdesc_t) *
(3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1);
for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
md = p;
if (!efi_wb(md)) {
continue;
}
if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
contig_low = GRANULEROUNDUP(md->phys_addr);
contig_high = efi_md_end(md);
for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
check_md = q;
if (!efi_wb(check_md))
break;
if (contig_high != check_md->phys_addr)
break;
contig_high = efi_md_end(check_md);
}
contig_high = GRANULEROUNDDOWN(contig_high);
}
if (!is_available_memory(md) || md->type == EFI_LOADER_DATA)
continue;
/* Round ends inward to granule boundaries */
as = max(contig_low, md->phys_addr);
ae = min(contig_high, efi_md_end(md));
/* keep within max_addr= command line arg */
ae = min(ae, max_addr);
if (ae <= as)
continue;
/* avoid going over mem= command line arg */
if (total_mem + (ae - as) > mem_limit)
ae -= total_mem + (ae - as) - mem_limit;
if (ae <= as)
continue;
if (ae - as > space_needed)
break;
}
if (p >= efi_map_end)
panic("Can't allocate space for kernel memory descriptors");
return __va(as);
}
/*
* Walk the EFI memory map and gather all memory available for kernel
* to use. We can allocate partial granules only if the unavailable
* parts exist, and are WB.
*/
void
efi_memmap_init(unsigned long *s, unsigned long *e)
{
struct kern_memdesc *k, *prev = 0;
u64 contig_low=0, contig_high=0;
u64 as, ae, lim;
void *efi_map_start, *efi_map_end, *p, *q;
efi_memory_desc_t *md, *pmd = NULL, *check_md;
u64 efi_desc_size;
unsigned long total_mem = 0;
k = kern_memmap = find_memmap_space();
efi_map_start = __va(ia64_boot_param->efi_memmap);
efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
efi_desc_size = ia64_boot_param->efi_memdesc_size;
for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
md = p;
if (!efi_wb(md)) {
if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY ||
md->type == EFI_BOOT_SERVICES_DATA)) {
k->attribute = EFI_MEMORY_UC;
k->start = md->phys_addr;
k->num_pages = md->num_pages;
k++;
}
continue;
}
if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
contig_low = GRANULEROUNDUP(md->phys_addr);
contig_high = efi_md_end(md);
for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
check_md = q;
if (!efi_wb(check_md))
break;
if (contig_high != check_md->phys_addr)
break;
contig_high = efi_md_end(check_md);
}
contig_high = GRANULEROUNDDOWN(contig_high);
}
if (!is_available_memory(md))
continue;
/*
* Round ends inward to granule boundaries
* Give trimmings to uncached allocator
*/
if (md->phys_addr < contig_low) {
lim = min(efi_md_end(md), contig_low);
if (efi_uc(md)) {
if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC &&
kmd_end(k-1) == md->phys_addr) {
(k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
} else {
k->attribute = EFI_MEMORY_UC;
k->start = md->phys_addr;
k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
k++;
}
}
as = contig_low;
} else
as = md->phys_addr;
if (efi_md_end(md) > contig_high) {
lim = max(md->phys_addr, contig_high);
if (efi_uc(md)) {
if (lim == md->phys_addr && k > kern_memmap &&
(k-1)->attribute == EFI_MEMORY_UC &&
kmd_end(k-1) == md->phys_addr) {
(k-1)->num_pages += md->num_pages;
} else {
k->attribute = EFI_MEMORY_UC;
k->start = lim;
k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT;
k++;
}
}
ae = contig_high;
} else
ae = efi_md_end(md);
/* keep within max_addr= command line arg */
ae = min(ae, max_addr);
if (ae <= as)
continue;
/* avoid going over mem= command line arg */
if (total_mem + (ae - as) > mem_limit)
ae -= total_mem + (ae - as) - mem_limit;
if (ae <= as)
continue;
if (prev && kmd_end(prev) == md->phys_addr) {
prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT;
total_mem += ae - as;
continue;
}
k->attribute = EFI_MEMORY_WB;
k->start = as;
k->num_pages = (ae - as) >> EFI_PAGE_SHIFT;
total_mem += ae - as;
prev = k++;
}
k->start = ~0L; /* end-marker */
/* reserve the memory we are using for kern_memmap */
*s = (u64)kern_memmap;
*e = (u64)++k;
}
void
efi_initialize_iomem_resources(struct resource *code_resource,
struct resource *data_resource)
{
struct resource *res;
void *efi_map_start, *efi_map_end, *p;
efi_memory_desc_t *md;
u64 efi_desc_size;
char *name;
unsigned long flags;
efi_map_start = __va(ia64_boot_param->efi_memmap);
efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
efi_desc_size = ia64_boot_param->efi_memdesc_size;
res = NULL;
for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
md = p;
if (md->num_pages == 0) /* should not happen */
continue;
flags = IORESOURCE_MEM;
switch (md->type) {
case EFI_MEMORY_MAPPED_IO:
case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
continue;
case EFI_LOADER_CODE:
case EFI_LOADER_DATA:
case EFI_BOOT_SERVICES_DATA:
case EFI_BOOT_SERVICES_CODE:
case EFI_CONVENTIONAL_MEMORY:
if (md->attribute & EFI_MEMORY_WP) {
name = "System ROM";
flags |= IORESOURCE_READONLY;
} else {
name = "System RAM";
}
break;
case EFI_ACPI_MEMORY_NVS:
name = "ACPI Non-volatile Storage";
flags |= IORESOURCE_BUSY;
break;
case EFI_UNUSABLE_MEMORY:
name = "reserved";
flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
break;
case EFI_RESERVED_TYPE:
case EFI_RUNTIME_SERVICES_CODE:
case EFI_RUNTIME_SERVICES_DATA:
case EFI_ACPI_RECLAIM_MEMORY:
default:
name = "reserved";
flags |= IORESOURCE_BUSY;
break;
}
if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) {
printk(KERN_ERR "failed to alocate resource for iomem\n");
return;
}
res->name = name;
res->start = md->phys_addr;
res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
res->flags = flags;
if (insert_resource(&iomem_resource, res) < 0)
kfree(res);
else {
/*
* We don't know which region contains
* kernel data so we try it repeatedly and
* let the resource manager test it.
*/
insert_resource(res, code_resource);
insert_resource(res, data_resource);
}
}
}
arch/ia64/kernel/irq.c
View file @ 8a212ab6
......@@ -57,9 +57,9 @@ int show_interrupts(struct seq_file *p, void *v)
if (i == 0) {
seq_printf(p, " ");
for (j=0; j<NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "CPU%d ",j);
for_each_online_cpu(j) {
seq_printf(p, "CPU%d ",j);
}
seq_putc(p, '\n');
}
......@@ -72,9 +72,9 @@ int show_interrupts(struct seq_file *p, void *v)
#ifndef CONFIG_SMP
seq_printf(p, "%10u ", kstat_irqs(i));
#else
for (j = 0; j < NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
for_each_online_cpu(j) {
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
}
#endif
seq_printf(p, " %14s", irq_desc[i].handler->typename);
seq_printf(p, " %s", action->name);
......
arch/ia64/kernel/mca.c
View file @ 8a212ab6
......@@ -508,9 +508,7 @@ ia64_mca_wakeup_all(void)
int cpu;
/* Clear the Rendez checkin flag for all cpus */
for(cpu = 0; cpu < NR_CPUS; cpu++) {
if (!cpu_online(cpu))
continue;
for_each_online_cpu(cpu) {
if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE)
ia64_mca_wakeup(cpu);
}
......
arch/ia64/kernel/module.c
View file @ 8a212ab6
......@@ -947,8 +947,8 @@ void
percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
{
unsigned int i;
for (i = 0; i < NR_CPUS; i++)
if (cpu_possible(i))
memcpy(pcpudst + __per_cpu_offset[i], src, size);
for_each_cpu(i) {
memcpy(pcpudst + __per_cpu_offset[i], src, size);
}
}
#endif /* CONFIG_SMP */
arch/ia64/kernel/patch.c
View file @ 8a212ab6
......@@ -64,22 +64,30 @@ ia64_patch (u64 insn_addr, u64 mask, u64 val)
void
ia64_patch_imm64 (u64 insn_addr, u64 val)
{
ia64_patch(insn_addr,
/* The assembler may generate offset pointing to either slot 1
or slot 2 for a long (2-slot) instruction, occupying slots 1
and 2. */
insn_addr &= -16UL;
ia64_patch(insn_addr + 2,
0x01fffefe000UL, ( ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */
| ((val & 0x0000000000200000UL) << 0) /* bit 21 -> 21 */
| ((val & 0x00000000001f0000UL) << 6) /* bit 16 -> 22 */
| ((val & 0x000000000000ff80UL) << 20) /* bit 7 -> 27 */
| ((val & 0x000000000000007fUL) << 13) /* bit 0 -> 13 */));
ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22);
ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22);
}
void
ia64_patch_imm60 (u64 insn_addr, u64 val)
{
ia64_patch(insn_addr,
/* The assembler may generate offset pointing to either slot 1
or slot 2 for a long (2-slot) instruction, occupying slots 1
and 2. */
insn_addr &= -16UL;
ia64_patch(insn_addr + 2,
0x011ffffe000UL, ( ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */
| ((val & 0x00000000000fffffUL) << 13) /* bit 0 -> 13 */));
ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18);
ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18);
}
/*
......
arch/ia64/kernel/ptrace.c
View file @ 8a212ab6
......@@ -587,8 +587,9 @@ thread_matches (struct task_struct *thread, unsigned long addr)
static struct task_struct *
find_thread_for_addr (struct task_struct *child, unsigned long addr)
{
struct task_struct *g, *p;
struct task_struct *p;
struct mm_struct *mm;
struct list_head *this, *next;
int mm_users;
if (!(mm = get_task_mm(child)))
......@@ -600,28 +601,21 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr)
goto out; /* not multi-threaded */
/*
* First, traverse the child's thread-list. Good for scalability with
* NPTL-threads.
* Traverse the current process' children list. Every task that
* one attaches to becomes a child. And it is only attached children
* of the debugger that are of interest (ptrace_check_attach checks
* for this).
*/
p = child;
do {
if (thread_matches(p, addr)) {
child = p;
goto out;
}
if (mm_users-- <= 1)
goto out;
} while ((p = next_thread(p)) != child);
do_each_thread(g, p) {
if (child->mm != mm)
list_for_each_safe(this, next, &current->children) {
p = list_entry(this, struct task_struct, sibling);
if (p->mm != mm)
continue;
if (thread_matches(p, addr)) {
child = p;
goto out;
}
} while_each_thread(g, p);
}
out:
mmput(mm);
return child;
......
arch/ia64/kernel/setup.c
View file @ 8a212ab6
......@@ -78,6 +78,19 @@ struct screen_info screen_info;
unsigned long vga_console_iobase;
unsigned long vga_console_membase;
static struct resource data_resource = {
.name = "Kernel data",
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
static struct resource code_resource = {
.name = "Kernel code",
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
extern void efi_initialize_iomem_resources(struct resource *,
struct resource *);
extern char _text[], _end[], _etext[];
unsigned long ia64_max_cacheline_size;
unsigned long ia64_iobase; /* virtual address for I/O accesses */
EXPORT_SYMBOL(ia64_iobase);
......@@ -171,6 +184,22 @@ sort_regions (struct rsvd_region *rsvd_region, int max)
}
}
/*
* Request address space for all standard resources
*/
static int __init register_memory(void)
{
code_resource.start = ia64_tpa(_text);
code_resource.end = ia64_tpa(_etext) - 1;
data_resource.start = ia64_tpa(_etext);
data_resource.end = ia64_tpa(_end) - 1;
efi_initialize_iomem_resources(&code_resource, &data_resource);
return 0;
}
__initcall(register_memory);
/**
* reserve_memory - setup reserved memory areas
*
......@@ -211,6 +240,9 @@ reserve_memory (void)
}
#endif
efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
n++;
/* end of memory marker */
rsvd_region[n].start = ~0UL;
rsvd_region[n].end = ~0UL;
......@@ -244,28 +276,31 @@ find_initrd (void)
static void __init
io_port_init (void)
{
extern unsigned long ia64_iobase;
unsigned long phys_iobase;
/*
* Set `iobase' to the appropriate address in region 6 (uncached access range).
* Set `iobase' based on the EFI memory map or, failing that, the
* value firmware left in ar.k0.
*
* The EFI memory map is the "preferred" location to get the I/O port space base,
* rather the relying on AR.KR0. This should become more clear in future SAL
* specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
* found in the memory map.
* Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute
* the port's virtual address, so ia32_load_state() loads it with a
* user virtual address. But in ia64 mode, glibc uses the
* *physical* address in ar.k0 to mmap the appropriate area from
* /dev/mem, and the inX()/outX() interfaces use MMIO. In both
* cases, user-mode can only use the legacy 0-64K I/O port space.
*
* ar.k0 is not involved in kernel I/O port accesses, which can use
* any of the I/O port spaces and are done via MMIO using the
* virtual mmio_base from the appropriate io_space[].
*/
phys_iobase = efi_get_iobase();
if (phys_iobase)
/* set AR.KR0 since this is all we use it for anyway */
ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
else {
if (!phys_iobase) {
phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
"to AR.KR0\n");
printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
printk(KERN_INFO "No I/O port range found in EFI memory map, "
"falling back to AR.KR0 (0x%lx)\n", phys_iobase);
}
ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
/* setup legacy IO port space */
io_space[0].mmio_base = ia64_iobase;
......@@ -526,7 +561,7 @@ show_cpuinfo (struct seq_file *m, void *v)
c->itc_freq / 1000000, c->itc_freq % 1000000,
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
seq_printf(m, "siblings : %u\n", c->num_log);
seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum]));
if (c->threads_per_core > 1 || c->cores_per_socket > 1)
seq_printf(m,
"physical id: %u\n"
......
arch/ia64/kernel/smp.c
View file @ 8a212ab6
......@@ -185,8 +185,8 @@ send_IPI_allbutself (int op)
{
unsigned int i;
for (i = 0; i < NR_CPUS; i++) {
if (cpu_online(i) && i != smp_processor_id())
for_each_online_cpu(i) {
if (i != smp_processor_id())
send_IPI_single(i, op);
}
}
......@@ -199,9 +199,9 @@ send_IPI_all (int op)
{
int i;
for (i = 0; i < NR_CPUS; i++)
if (cpu_online(i))
send_IPI_single(i, op);
for_each_online_cpu(i) {
send_IPI_single(i, op);
}
}
/*
......
arch/ia64/kernel/smpboot.c
View file @ 8a212ab6
......@@ -694,9 +694,9 @@ smp_cpus_done (unsigned int dummy)
* Allow the user to impress friends.
*/
for (cpu = 0; cpu < NR_CPUS; cpu++)
if (cpu_online(cpu))
bogosum += cpu_data(cpu)->loops_per_jiffy;
for_each_online_cpu(cpu) {
bogosum += cpu_data(cpu)->loops_per_jiffy;
}
printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
(int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
......
arch/ia64/kernel/uncached.c
View file @ 8a212ab6
......@@ -205,23 +205,18 @@ EXPORT_SYMBOL(uncached_free_page);
static int __init
uncached_build_memmap(unsigned long start, unsigned long end, void *arg)
{
long length;
unsigned long vstart, vend;
long length = end - start;
int node;
length = end - start;
vstart = start + __IA64_UNCACHED_OFFSET;
vend = end + __IA64_UNCACHED_OFFSET;
dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end);
memset((char *)vstart, 0, length);
memset((char *)start, 0, length);
node = paddr_to_nid(start);
node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET);
for (; vstart < vend ; vstart += PAGE_SIZE) {
dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart);
gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE);
for (; start < end ; start += PAGE_SIZE) {
dprintk(KERN_INFO "sticking %lx into the pool!\n", start);
gen_pool_free(uncached_pool[node], start, PAGE_SIZE);
}
return 0;
......
arch/ia64/lib/swiotlb.c
View file @ 8a212ab6
......@@ -49,6 +49,15 @@
*/
#define IO_TLB_SHIFT 11
#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
/*
* Minimum IO TLB size to bother booting with. Systems with mainly
* 64bit capable cards will only lightly use the swiotlb. If we can't
* allocate a contiguous 1MB, we're probably in trouble anyway.
*/
#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
int swiotlb_force;
/*
......@@ -154,6 +163,99 @@ swiotlb_init (void)
swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
}
/*
* Systems with larger DMA zones (those that don't support ISA) can
* initialize the swiotlb later using the slab allocator if needed.
* This should be just like above, but with some error catching.
*/
int
swiotlb_late_init_with_default_size (size_t default_size)
{
unsigned long i, req_nslabs = io_tlb_nslabs;
unsigned int order;
if (!io_tlb_nslabs) {
io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
}
/*
* Get IO TLB memory from the low pages
*/
order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
io_tlb_nslabs = SLABS_PER_PAGE << order;
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
order);
if (io_tlb_start)
break;
order--;
}
if (!io_tlb_start)
goto cleanup1;
if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) {
printk(KERN_WARNING "Warning: only able to allocate %ld MB "
"for software IO TLB\n", (PAGE_SIZE << order) >> 20);
io_tlb_nslabs = SLABS_PER_PAGE << order;
}
io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT));
/*
* Allocate and initialize the free list array. This array is used
* to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
* between io_tlb_start and io_tlb_end.
*/
io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
get_order(io_tlb_nslabs * sizeof(int)));
if (!io_tlb_list)
goto cleanup2;
for (i = 0; i < io_tlb_nslabs; i++)
io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
io_tlb_index = 0;
io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL,
get_order(io_tlb_nslabs * sizeof(char *)));
if (!io_tlb_orig_addr)
goto cleanup3;
memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *));
/*
* Get the overflow emergency buffer
*/
io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
get_order(io_tlb_overflow));
if (!io_tlb_overflow_buffer)
goto cleanup4;
printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - "
"0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20,
virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
return 0;
cleanup4:
free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs *
sizeof(char *)));
io_tlb_orig_addr = NULL;
cleanup3:
free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
sizeof(int)));
io_tlb_list = NULL;
io_tlb_end = NULL;
cleanup2:
free_pages((unsigned long)io_tlb_start, order);
io_tlb_start = NULL;
cleanup1:
io_tlb_nslabs = req_nslabs;
return -ENOMEM;
}
static inline int
address_needs_mapping(struct device *hwdev, dma_addr_t addr)
{
......
arch/ia64/mm/Makefile
View file @ 8a212ab6
......@@ -7,6 +7,5 @@ obj-y := init.o fault.o tlb.o extable.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
ifndef CONFIG_DISCONTIGMEM
obj-y += contig.o
endif
obj-$(CONFIG_SPARSEMEM) += discontig.o
obj-$(CONFIG_FLATMEM) += contig.o
arch/ia64/mm/contig.c
View file @ 8a212ab6
......@@ -269,7 +269,7 @@ paging_init (void)
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
free_area_init_node(0, &contig_page_data, zones_size, 0,
free_area_init_node(0, NODE_DATA(0), zones_size, 0,
zholes_size);
} else {
unsigned long map_size;
......@@ -282,7 +282,7 @@ paging_init (void)
efi_memmap_walk(create_mem_map_page_table, NULL);
NODE_DATA(0)->node_mem_map = vmem_map;
free_area_init_node(0, &contig_page_data, zones_size,
free_area_init_node(0, NODE_DATA(0), zones_size,
0, zholes_size);
printk("Virtual mem_map starts at 0x%p\n", mem_map);
......
arch/ia64/mm/discontig.c
View file @ 8a212ab6
......@@ -421,6 +421,37 @@ static void __init memory_less_nodes(void)
return;
}
#ifdef CONFIG_SPARSEMEM
/**
* register_sparse_mem - notify SPARSEMEM that this memory range exists.
* @start: physical start of range
* @end: physical end of range
* @arg: unused
*
* Simply calls SPARSEMEM to register memory section(s).
*/
static int __init register_sparse_mem(unsigned long start, unsigned long end,
void *arg)
{
int nid;
start = __pa(start) >> PAGE_SHIFT;
end = __pa(end) >> PAGE_SHIFT;
nid = early_pfn_to_nid(start);
memory_present(nid, start, end);
return 0;
}
static void __init arch_sparse_init(void)
{
efi_memmap_walk(register_sparse_mem, NULL);
sparse_init();
}
#else
#define arch_sparse_init() do {} while (0)
#endif
/**
* find_memory - walk the EFI memory map and setup the bootmem allocator
*
......@@ -528,8 +559,10 @@ void show_mem(void)
int shared = 0, cached = 0, reserved = 0;
printk("Node ID: %d\n", pgdat->node_id);
for(i = 0; i < pgdat->node_spanned_pages; i++) {
struct page *page = pgdat_page_nr(pgdat, i);
if (!ia64_pfn_valid(pgdat->node_start_pfn+i))
struct page *page;
if (pfn_valid(pgdat->node_start_pfn + i))
page = pfn_to_page(pgdat->node_start_pfn + i);
else
continue;
if (PageReserved(page))
reserved++;
......@@ -648,12 +681,16 @@ void __init paging_init(void)
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
arch_sparse_init();
efi_memmap_walk(filter_rsvd_memory, count_node_pages);
#ifdef CONFIG_VIRTUAL_MEM_MAP
vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
vmem_map = (struct page *) vmalloc_end;
efi_memmap_walk(create_mem_map_page_table, NULL);
printk("Virtual mem_map starts at 0x%p\n", vmem_map);
#endif
for_each_online_node(node) {
memset(zones_size, 0, sizeof(zones_size));
......@@ -690,7 +727,9 @@ void __init paging_init(void)
pfn_offset = mem_data[node].min_pfn;
#ifdef CONFIG_VIRTUAL_MEM_MAP
NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
#endif
free_area_init_node(node, NODE_DATA(node), zones_size,
pfn_offset, zholes_size);
}
......
arch/ia64/mm/init.c
View file @ 8a212ab6
......@@ -593,7 +593,7 @@ mem_init (void)
platform_dma_init();
#endif
#ifndef CONFIG_DISCONTIGMEM
#ifdef CONFIG_FLATMEM
if (!mem_map)
BUG();
max_mapnr = max_low_pfn;
......
arch/ia64/mm/numa.c
View file @ 8a212ab6
......@@ -47,3 +47,27 @@ paddr_to_nid(unsigned long paddr)
return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
}
#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
/*
* Because of holes evaluate on section limits.
* If the section of memory exists, then return the node where the section
* resides. Otherwise return node 0 as the default. This is used by
* SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
* the section resides.
*/
int early_pfn_to_nid(unsigned long pfn)
{
int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
for (i = 0; i < num_node_memblks; i++) {
ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT;
esec = (node_memblk[i].start_paddr + node_memblk[i].size +
((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT;
if (section >= ssec && section < esec)
return node_memblk[i].nid;
}
return 0;
}
#endif
arch/ia64/mm/tlb.c
View file @ 8a212ab6
......@@ -77,19 +77,25 @@ wrap_mmu_context (struct mm_struct *mm)
/* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */
{
int cpu = get_cpu(); /* prevent preemption/migration */
for (i = 0; i < NR_CPUS; ++i)
if (cpu_online(i) && (i != cpu))
for_each_online_cpu(i) {
if (i != cpu)
per_cpu(ia64_need_tlb_flush, i) = 1;
}
put_cpu();
}
local_flush_tlb_all();
}
void
ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits)
{
static DEFINE_SPINLOCK(ptcg_lock);
if (mm != current->active_mm) {
flush_tlb_all();
return;
}
/* HW requires global serialization of ptc.ga. */
spin_lock(&ptcg_lock);
{
......@@ -135,15 +141,12 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long
unsigned long size = end - start;
unsigned long nbits;
#ifndef CONFIG_SMP
if (mm != current->active_mm) {
/* this does happen, but perhaps it's not worth optimizing for? */
#ifdef CONFIG_SMP
flush_tlb_all();
#else
mm->context = 0;
#endif
return;
}
#endif
nbits = ia64_fls(size + 0xfff);
while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits))
......@@ -153,7 +156,7 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long
start &= ~((1UL << nbits) - 1);
# ifdef CONFIG_SMP
platform_global_tlb_purge(start, end, nbits);
platform_global_tlb_purge(mm, start, end, nbits);
# else
do {
ia64_ptcl(start, (nbits<<2));
......
arch/ia64/pci/pci.c
View file @ 8a212ab6
......@@ -120,29 +120,6 @@ struct pci_ops pci_root_ops = {
.write = pci_write,
};
#ifdef CONFIG_NUMA
extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **);
static void acpi_map_iosapics(void)
{
acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
}
#else
static void acpi_map_iosapics(void)
{
return;
}
#endif /* CONFIG_NUMA */
static int __init
pci_acpi_init (void)
{
acpi_map_iosapics();
return 0;
}
subsys_initcall(pci_acpi_init);
/* Called by ACPI when it finds a new root bus. */
static struct pci_controller * __devinit
......@@ -191,6 +168,29 @@ add_io_space (struct acpi_resource_address64 *addr)
return IO_SPACE_BASE(i);
}
static acpi_status __devinit resource_to_window(struct acpi_resource *resource,
struct acpi_resource_address64 *addr)
{
acpi_status status;
/*
* We're only interested in _CRS descriptors that are
* - address space descriptors for memory or I/O space
* - non-zero size
* - producers, i.e., the address space is routed downstream,
* not consumed by the bridge itself
*/
status = acpi_resource_to_address64(resource, addr);
if (ACPI_SUCCESS(status) &&
(addr->resource_type == ACPI_MEMORY_RANGE ||
addr->resource_type == ACPI_IO_RANGE) &&
addr->address_length &&
addr->producer_consumer == ACPI_PRODUCER)
return AE_OK;
return AE_ERROR;
}
static acpi_status __devinit
count_window (struct acpi_resource *resource, void *data)
{
......@@ -198,11 +198,9 @@ count_window (struct acpi_resource *resource, void *data)
struct acpi_resource_address64 addr;
acpi_status status;
status = acpi_resource_to_address64(resource, &addr);
status = resource_to_window(resource, &addr);
if (ACPI_SUCCESS(status))
if (addr.resource_type == ACPI_MEMORY_RANGE ||
addr.resource_type == ACPI_IO_RANGE)
(*windows)++;
(*windows)++;
return AE_OK;
}
......@@ -221,13 +219,11 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
unsigned long flags, offset = 0;
struct resource *root;
status = acpi_resource_to_address64(res, &addr);
/* Return AE_OK for non-window resources to keep scanning for more */
status = resource_to_window(res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
if (!addr.address_length)
return AE_OK;
if (addr.resource_type == ACPI_MEMORY_RANGE) {
flags = IORESOURCE_MEM;
root = &iomem_resource;
......
arch/ia64/sn/kernel/bte.c
View file @ 8a212ab6
......@@ -87,7 +87,7 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
unsigned long irq_flags;
unsigned long itc_end = 0;
int nasid_to_try[MAX_NODES_TO_TRY];
int my_nasid = get_nasid();
int my_nasid = cpuid_to_nasid(raw_smp_processor_id());
int bte_if_index, nasid_index;
int bte_first, btes_per_node = BTES_PER_NODE;
......
arch/ia64/sn/kernel/io_init.c
View file @ 8a212ab6
......@@ -22,8 +22,6 @@
#include "xtalk/hubdev.h"
#include "xtalk/xwidgetdev.h"
nasid_t master_nasid = INVALID_NASID; /* Partition Master */
static struct list_head sn_sysdata_list;
/* sysdata list struct */
......@@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void)
* Get SGI Specific HUB chipset information.
* Inform Prom that this kernel can support domain bus numbering.
*/
for (i = 0; i < numionodes; i++) {
for (i = 0; i < num_cnodes; i++) {
hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
nasid = cnodeid_to_nasid(i);
hubdev->max_segment_number = 0xffffffff;
......
arch/ia64/sn/kernel/setup.c
View file @ 8a212ab6
......@@ -59,8 +59,6 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu);
#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */
lboard_t *root_lboard[MAX_COMPACT_NODES];
extern void bte_init_node(nodepda_t *, cnodeid_t);
extern void sn_timer_init(void);
......@@ -97,15 +95,15 @@ u8 sn_region_size;
EXPORT_SYMBOL(sn_region_size);
int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
short physical_node_map[MAX_PHYSNODE_ID];
short physical_node_map[MAX_NUMALINK_NODES];
static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
EXPORT_SYMBOL(physical_node_map);
int numionodes;
int num_cnodes;
static void sn_init_pdas(char **);
static void scan_for_ionodes(void);
static void build_cnode_tables(void);
static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
......@@ -139,19 +137,6 @@ extern char drive_info[4 * 16];
char drive_info[4 * 16];
#endif
/*
* Get nasid of current cpu early in boot before nodepda is initialized
*/
static int
boot_get_nasid(void)
{
int nasid;
if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
BUG();
return nasid;
}
/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
......@@ -223,7 +208,6 @@ void __init early_sn_setup(void)
}
extern int platform_intr_list[];
extern nasid_t master_nasid;
static int __initdata shub_1_1_found = 0;
/*
......@@ -269,7 +253,6 @@ static void __init sn_check_for_wars(void)
void __init sn_setup(char **cmdline_p)
{
long status, ticks_per_sec, drift;
int pxm;
u32 version = sn_sal_rev();
extern void sn_cpu_init(void);
......@@ -300,11 +283,10 @@ void __init sn_setup(char **cmdline_p)
MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
memset(physical_node_map, -1, sizeof(physical_node_map));
for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
if (pxm_to_nid_map[pxm] != -1)
physical_node_map[pxm_to_nasid(pxm)] =
pxm_to_nid_map[pxm];
/*
* Build the tables for managing cnodes.
*/
build_cnode_tables();
/*
* Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
......@@ -319,8 +301,6 @@ void __init sn_setup(char **cmdline_p)
printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
master_nasid = boot_get_nasid();
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
......@@ -378,15 +358,6 @@ static void __init sn_init_pdas(char **cmdline_p)
{
cnodeid_t cnode;
memset(sn_cnodeid_to_nasid, -1,
sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
for_each_online_node(cnode)
sn_cnodeid_to_nasid[cnode] =
pxm_to_nasid(nid_to_pxm_map[cnode]);
numionodes = num_online_nodes();
scan_for_ionodes();
/*
* Allocate & initalize the nodepda for each node.
*/
......@@ -402,7 +373,7 @@ static void __init sn_init_pdas(char **cmdline_p)
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
......@@ -411,7 +382,7 @@ static void __init sn_init_pdas(char **cmdline_p)
/*
* Now copy the array of nodepda pointers to each nodepda.
*/
for (cnode = 0; cnode < numionodes; cnode++)
for (cnode = 0; cnode < num_cnodes; cnode++)
memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
sizeof(nodepdaindr));
......@@ -428,7 +399,7 @@ static void __init sn_init_pdas(char **cmdline_p)
* Initialize the per node hubdev. This includes IO Nodes and
* headless/memless nodes.
*/
for (cnode = 0; cnode < numionodes; cnode++) {
for (cnode = 0; cnode < num_cnodes; cnode++) {
hubdev_init_node(nodepdaindr[cnode], cnode);
}
}
......@@ -553,87 +524,58 @@ void __init sn_cpu_init(void)
}
/*
* Scan klconfig for ionodes. Add the nasids to the
* physical_node_map and the pda and increment numionodes.
* Build tables for converting between NASIDs and cnodes.
*/
static inline int __init board_needs_cnode(int type)
{
return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
}
static void __init scan_for_ionodes(void)
void __init build_cnode_tables(void)
{
int nasid = 0;
int nasid;
int node;
lboard_t *brd;
/* fakeprom does not support klgraph */
if (IS_RUNNING_ON_FAKE_PROM())
return;
/* Setup ionodes with memory */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
char *klgraph_header;
cnodeid_t cnodeid;
if (physical_node_map[nasid] == -1)
continue;
memset(physical_node_map, -1, sizeof(physical_node_map));
memset(sn_cnodeid_to_nasid, -1,
sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
cnodeid = -1;
klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
if (!klgraph_header) {
BUG(); /* All nodes must have klconfig tables! */
}
cnodeid = nasid_to_cnodeid(nasid);
root_lboard[cnodeid] = (lboard_t *)
NODE_OFFSET_TO_LBOARD((nasid),
((kl_config_hdr_t
*) (klgraph_header))->
ch_board_info);
/*
* First populate the tables with C/M bricks. This ensures that
* cnode == node for all C & M bricks.
*/
for_each_online_node(node) {
nasid = pxm_to_nasid(nid_to_pxm_map[node]);
sn_cnodeid_to_nasid[node] = nasid;
physical_node_map[nasid] = node;
}
/* Scan headless/memless IO Nodes. */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
/* if there's no nasid, don't try to read the klconfig on the node */
if (physical_node_map[nasid] == -1)
continue;
brd = find_lboard_any((lboard_t *)
root_lboard[nasid_to_cnodeid(nasid)],
KLTYPE_SNIA);
if (brd) {
brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */
if (!brd)
continue;
}
brd = find_lboard_any(brd, KLTYPE_SNIA);
/*
* num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
* limit on the number of nodes, we can't use the generic node numbers
* for this. Note that num_cnodes is incremented below as TIOs or
* headless/memoryless nodes are discovered.
*/
num_cnodes = num_online_nodes();
while (brd) {
sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
physical_node_map[brd->brd_nasid] = numionodes;
root_lboard[numionodes] = brd;
numionodes++;
brd = KLCF_NEXT_ANY(brd);
if (!brd)
break;
brd = find_lboard_any(brd, KLTYPE_SNIA);
}
}
/* fakeprom does not support klgraph */
if (IS_RUNNING_ON_FAKE_PROM())
return;
/* Scan for TIO nodes. */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
/* if there's no nasid, don't try to read the klconfig on the node */
if (physical_node_map[nasid] == -1)
continue;
brd = find_lboard_any((lboard_t *)
root_lboard[nasid_to_cnodeid(nasid)],
KLTYPE_TIO);
/* Find TIOs & headless/memoryless nodes and add them to the tables */
for_each_online_node(node) {
kl_config_hdr_t *klgraph_header;
nasid = cnodeid_to_nasid(node);
if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
BUG();
brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
physical_node_map[brd->brd_nasid] = numionodes;
root_lboard[numionodes] = brd;
numionodes++;
brd = KLCF_NEXT_ANY(brd);
if (!brd)
break;
brd = find_lboard_any(brd, KLTYPE_TIO);
if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
physical_node_map[brd->brd_nasid] = num_cnodes++;
}
brd = find_lboard_next(brd);
}
}
}
......
arch/ia64/sn/kernel/sn2/sn2_smp.c
View file @ 8a212ab6
......@@ -177,6 +177,7 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
/**
* sn2_global_tlb_purge - globally purge translation cache of virtual address range
* @mm: mm_struct containing virtual address range
* @start: start of virtual address range
* @end: end of virtual address range
* @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc))
......@@ -188,21 +189,22 @@ void sn_tlb_migrate_finish(struct mm_struct *mm)
* - cpu_vm_mask is a bit mask that indicates which cpus have loaded the context.
* - cpu_vm_mask is converted into a nodemask of the nodes containing the
* cpus in cpu_vm_mask.
* - if only one bit is set in cpu_vm_mask & it is the current cpu,
* then only the local TLB needs to be flushed. This flushing can be done
* using ptc.l. This is the common case & avoids the global spinlock.
* - if only one bit is set in cpu_vm_mask & it is the current cpu & the
* process is purging its own virtual address range, then only the
* local TLB needs to be flushed. This flushing can be done using
* ptc.l. This is the common case & avoids the global spinlock.
* - if multiple cpus have loaded the context, then flushing has to be
* done with ptc.g/MMRs under protection of the global ptc_lock.
*/
void
sn2_global_tlb_purge(unsigned long start, unsigned long end,
unsigned long nbits)
sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long nbits)
{
int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
int mymm = (mm == current->active_mm);
volatile unsigned long *ptc0, *ptc1;
unsigned long itc, itc2, flags, data0 = 0, data1 = 0;
struct mm_struct *mm = current->active_mm;
unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value;
short nasids[MAX_NUMNODES], nix;
nodemask_t nodes_flushed;
......@@ -216,9 +218,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
i++;
}
if (i == 0)
return;
preempt_disable();
if (likely(i == 1 && lcpu == smp_processor_id())) {
if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) {
do {
ia64_ptcl(start, nbits << 2);
start += (1UL << nbits);
......@@ -229,7 +234,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
return;
}
if (atomic_read(&mm->mm_users) == 1) {
if (atomic_read(&mm->mm_users) == 1 && mymm) {
flush_tlb_mm(mm);
__get_cpu_var(ptcstats).change_rid++;
preempt_enable();
......@@ -241,11 +246,13 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
for_each_node_mask(cnode, nodes_flushed)
nasids[nix++] = cnodeid_to_nasid(cnode);
rr_value = (mm->context << 3) | REGION_NUMBER(start);
shub1 = is_shub1();
if (shub1) {
data0 = (1UL << SH1_PTC_0_A_SHFT) |
(nbits << SH1_PTC_0_PS_SHFT) |
((ia64_get_rr(start) >> 8) << SH1_PTC_0_RID_SHFT) |
(rr_value << SH1_PTC_0_RID_SHFT) |
(1UL << SH1_PTC_0_START_SHFT);
ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0);
ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1);
......@@ -254,7 +261,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
(nbits << SH2_PTC_PS_SHFT) |
(1UL << SH2_PTC_START_SHFT);
ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC +
((ia64_get_rr(start) >> 8) << SH2_PTC_RID_SHFT) );
(rr_value << SH2_PTC_RID_SHFT));
ptc1 = NULL;
}
......@@ -275,7 +282,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
for (i = 0; i < nix; i++) {
nasid = nasids[i];
if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) {
if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) {
ia64_ptcga(start, nbits << 2);
ia64_srlz_i();
} else {
......
arch/ia64/sn/kernel/sn2/sn_hwperf.c
View file @ 8a212ab6
......@@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d)
for_each_online_cpu(j) {
seq_printf(s, j ? ":%d" : ", dist %d",
node_distance(
cpuid_to_cnodeid(i),
cpuid_to_cnodeid(j)));
cpu_to_node(i),
cpu_to_node(j)));
}
seq_putc(s, '\n');
}
......
arch/ia64/sn/kernel/tiocx.c
View file @ 8a212ab6
......@@ -183,11 +183,12 @@ int cx_driver_unregister(struct cx_drv *cx_driver)
* @part_num: device's part number
* @mfg_num: device's manufacturer number
* @hubdev: hub info associated with this device
* @bt: board type of the device
*
*/
int
cx_device_register(nasid_t nasid, int part_num, int mfg_num,
struct hubdev_info *hubdev)
struct hubdev_info *hubdev, int bt)
{
struct cx_dev *cx_dev;
......@@ -200,6 +201,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
cx_dev->cx_id.mfg_num = mfg_num;
cx_dev->cx_id.nasid = nasid;
cx_dev->hubdev = hubdev;
cx_dev->bt = bt;
cx_dev->dev.parent = NULL;
cx_dev->dev.bus = &tiocx_bus_type;
......@@ -238,7 +240,8 @@ static int cx_device_reload(struct cx_dev *cx_dev)
{
cx_device_unregister(cx_dev);
return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
cx_dev->cx_id.mfg_num, cx_dev->hubdev);
cx_dev->cx_id.mfg_num, cx_dev->hubdev,
cx_dev->bt);
}
static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget,
......@@ -365,26 +368,20 @@ static void tio_corelet_reset(nasid_t nasid, int corelet)
udelay(2000);
}
static int tiocx_btchar_get(int nasid)
static int is_fpga_tio(int nasid, int *bt)
{
moduleid_t module_id;
geoid_t geoid;
int cnodeid;
cnodeid = nasid_to_cnodeid(nasid);
geoid = cnodeid_get_geoid(cnodeid);
module_id = geo_module(geoid);
return MODULE_GET_BTCHAR(module_id);
}
int ioboard_type;
static int is_fpga_brick(int nasid)
{
switch (tiocx_btchar_get(nasid)) {
ioboard_type = ia64_sn_sysctl_ioboard_get(nasid);
switch (ioboard_type) {
case L1_BRICKTYPE_SA:
case L1_BRICKTYPE_ATHENA:
case L1_BRICKTYPE_DAYTONA:
case L1_BOARDTYPE_DAYTONA:
*bt = ioboard_type;
return 1;
}
return 0;
}
......@@ -407,16 +404,22 @@ static int tiocx_reload(struct cx_dev *cx_dev)
if (bitstream_loaded(nasid)) {
uint64_t cx_id;
cx_id =
*(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
int rv;
rv = ia64_sn_sysctl_tio_clock_reset(nasid);
if (rv) {
printk(KERN_ALERT "CX port JTAG reset failed.\n");
} else {
cx_id = *(volatile uint64_t *)
(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
WIDGET_ID);
part_num = XWIDGET_PART_NUM(cx_id);
mfg_num = XWIDGET_MFG_NUM(cx_id);
DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
/* just ignore it if it's a CE */
if (part_num == TIO_CE_ASIC_PARTNUM)
return 0;
part_num = XWIDGET_PART_NUM(cx_id);
mfg_num = XWIDGET_MFG_NUM(cx_id);
DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
/* just ignore it if it's a CE */
if (part_num == TIO_CE_ASIC_PARTNUM)
return 0;
}
}
cx_dev->cx_id.part_num = part_num;
......@@ -436,10 +439,10 @@ static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *a
{
struct cx_dev *cx_dev = to_cx_dev(dev);
return sprintf(buf, "0x%x 0x%x 0x%x %d\n",
return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n",
cx_dev->cx_id.nasid,
cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num,
tiocx_btchar_get(cx_dev->cx_id.nasid));
cx_dev->bt);
}
static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf,
......@@ -486,13 +489,13 @@ static int __init tiocx_init(void)
bus_register(&tiocx_bus_type);
for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) {
for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) {
nasid_t nasid;
int bt;
if ((nasid = cnodeid_to_nasid(cnodeid)) < 0)
break; /* No more nasids .. bail out of loop */
nasid = cnodeid_to_nasid(cnodeid);
if ((nasid & 0x1) && is_fpga_brick(nasid)) {
if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) {
struct hubdev_info *hubdev;
struct xwidget_info *widgetp;
......@@ -512,7 +515,7 @@ static int __init tiocx_init(void)
if (cx_device_register
(nasid, widgetp->xwi_hwid.part_num,
widgetp->xwi_hwid.mfg_num, hubdev) < 0)
widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0)
return -ENXIO;
else
found_tiocx_device++;
......
arch/ia64/sn/kernel/xpc.h
View file @ 8a212ab6
......@@ -57,7 +57,7 @@
#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */
#define XPC_HB_CHECK_DEFAULT_TIMEOUT 20 /* check HB every x secs */
#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */
/* define the process name of HB checker and the CPU it is pinned to */
#define XPC_HB_CHECK_THREAD_NAME "xpc_hb"
......@@ -67,34 +67,82 @@
#define XPC_DISCOVERY_THREAD_NAME "xpc_discovery"
#define XPC_HB_ALLOWED(_p, _v) ((_v)->heartbeating_to_mask & (1UL << (_p)))
#define XPC_ALLOW_HB(_p, _v) (_v)->heartbeating_to_mask |= (1UL << (_p))
#define XPC_DISALLOW_HB(_p, _v) (_v)->heartbeating_to_mask &= (~(1UL << (_p)))
/*
* Reserved Page provided by SAL.
* the reserved page
*
* SAL reserves one page of memory per partition for XPC. Though a full page
* in length (16384 bytes), its starting address is not page aligned, but it
* is cacheline aligned. The reserved page consists of the following:
*
* reserved page header
*
* The first cacheline of the reserved page contains the header
* (struct xpc_rsvd_page). Before SAL initialization has completed,
* SAL has set up the following fields of the reserved page header:
* SAL_signature, SAL_version, partid, and nasids_size. The other
* fields are set up by XPC. (xpc_rsvd_page points to the local
* partition's reserved page.)
*
* SAL provides one page per partition of reserved memory. When SAL
* initialization is complete, SAL_signature, SAL_version, partid,
* part_nasids, and mach_nasids are set.
* part_nasids mask
* mach_nasids mask
*
* SAL also sets up two bitmaps (or masks), one that reflects the actual
* nasids in this partition (part_nasids), and the other that reflects
* the actual nasids in the entire machine (mach_nasids). We're only
* interested in the even numbered nasids (which contain the processors
* and/or memory), so we only need half as many bits to represent the
* nasids. The part_nasids mask is located starting at the first cacheline
* following the reserved page header. The mach_nasids mask follows right
* after the part_nasids mask. The size in bytes of each mask is reflected
* by the reserved page header field 'nasids_size'. (Local partition's
* mask pointers are xpc_part_nasids and xpc_mach_nasids.)
*
* vars
* vars part
*
* Immediately following the mach_nasids mask are the XPC variables
* required by other partitions. First are those that are generic to all
* partitions (vars), followed on the next available cacheline by those
* which are partition specific (vars part). These are setup by XPC.
* (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
*
* Note: Until vars_pa is set, the partition XPC code has not been initialized.
*/
struct xpc_rsvd_page {
u64 SAL_signature; /* SAL unique signature */
u64 SAL_version; /* SAL specified version */
u8 partid; /* partition ID from SAL */
u64 SAL_signature; /* SAL: unique signature */
u64 SAL_version; /* SAL: version */
u8 partid; /* SAL: partition ID */
u8 version;
u8 pad[6]; /* pad to u64 align */
u8 pad1[6]; /* align to next u64 in cacheline */
volatile u64 vars_pa;
u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned;
struct timespec stamp; /* time when reserved page was setup by XPC */
u64 pad2[9]; /* align to last u64 in cacheline */
u64 nasids_size; /* SAL: size of each nasid mask in bytes */
};
#define XPC_RP_VERSION _XPC_VERSION(1,0) /* version 1.0 of the reserved page */
#define XPC_RSVD_PAGE_ALIGNED_SIZE \
(L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)))
#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */
#define XPC_SUPPORTS_RP_STAMP(_version) \
(_version >= _XPC_VERSION(1,1))
/*
* compare stamps - the return value is:
*
* < 0, if stamp1 < stamp2
* = 0, if stamp1 == stamp2
* > 0, if stamp1 > stamp2
*/
static inline int
xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
{
int ret;
if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) {
ret = stamp1->tv_nsec - stamp2->tv_nsec;
}
return ret;
}
/*
......@@ -121,11 +169,58 @@ struct xpc_vars {
u64 vars_part_pa;
u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */
AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */
AMO_t *act_amos; /* pointer to the first activation AMO */
};
#define XPC_V_VERSION _XPC_VERSION(3,0) /* version 3.0 of the cross vars */
#define XPC_VARS_ALIGNED_SIZE (L1_CACHE_ALIGN(sizeof(struct xpc_vars)))
#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */
#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
(_version >= _XPC_VERSION(3,1))
static inline int
xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
{
return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
}
static inline void
xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
{
u64 old_mask, new_mask;
do {
old_mask = vars->heartbeating_to_mask;
new_mask = (old_mask | (1UL << partid));
} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
old_mask);
}
static inline void
xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
{
u64 old_mask, new_mask;
do {
old_mask = vars->heartbeating_to_mask;
new_mask = (old_mask & ~(1UL << partid));
} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
old_mask);
}
/*
* The AMOs page consists of a number of AMO variables which are divided into
* four groups, The first two groups are used to identify an IRQ's sender.
* These two groups consist of 64 and 128 AMO variables respectively. The last
* two groups, consisting of just one AMO variable each, are used to identify
* the remote partitions that are currently engaged (from the viewpoint of
* the XPC running on the remote partition).
*/
#define XPC_NOTIFY_IRQ_AMOS 0
#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1)
/*
* The following structure describes the per partition specific variables.
......@@ -165,6 +260,16 @@ struct xpc_vars_part {
#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
/* the reserved page sizes and offsets */
#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars))
#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE)
#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words)
#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE)
/*
* Functions registered by add_timer() or called by kernel_thread() only
......@@ -349,6 +454,9 @@ struct xpc_channel {
atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */
wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
u8 delayed_IPI_flags; /* IPI flags received, but delayed */
/* action until channel disconnected */
/* queue of msg senders who want to be notified when msg received */
atomic_t n_to_notify; /* #of msg senders to notify */
......@@ -358,7 +466,7 @@ struct xpc_channel {
void *key; /* pointer to user's key */
struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
struct semaphore teardown_sema; /* wait for teardown completion */
struct semaphore wdisconnect_sema; /* wait for channel disconnect */
struct xpc_openclose_args *local_openclose_args; /* args passed on */
/* opening or closing of channel */
......@@ -410,6 +518,8 @@ struct xpc_channel {
#define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */
#define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */
#define XPC_C_DISCONNECTCALLOUT 0x00008000 /* chan disconnected callout made */
#define XPC_C_WDISCONNECT 0x00010000 /* waiting for channel disconnect */
......@@ -422,6 +532,8 @@ struct xpc_partition {
/* XPC HB infrastructure */
u8 remote_rp_version; /* version# of partition's rsvd pg */
struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */
u64 remote_rp_pa; /* phys addr of partition's rsvd pg */
u64 remote_vars_pa; /* phys addr of partition's vars */
u64 remote_vars_part_pa; /* phys addr of partition's vars part */
......@@ -432,14 +544,18 @@ struct xpc_partition {
u32 act_IRQ_rcvd; /* IRQs since activation */
spinlock_t act_lock; /* protect updating of act_state */
u8 act_state; /* from XPC HB viewpoint */
u8 remote_vars_version; /* version# of partition's vars */
enum xpc_retval reason; /* reason partition is deactivating */
int reason_line; /* line# deactivation initiated from */
int reactivate_nasid; /* nasid in partition to reactivate */
unsigned long disengage_request_timeout; /* timeout in jiffies */
struct timer_list disengage_request_timer;
/* XPC infrastructure referencing and teardown control */
volatile u8 setup_state; /* infrastructure setup state */
volatile u8 setup_state; /* infrastructure setup state */
wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */
atomic_t references; /* #of references to infrastructure */
......@@ -454,6 +570,7 @@ struct xpc_partition {
u8 nchannels; /* #of defined channels supported */
atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
atomic_t nchannels_engaged;/* #of channels engaged with remote part */
struct xpc_channel *channels;/* array of channel structures */
void *local_GPs_base; /* base address of kmalloc'd space */
......@@ -518,6 +635,7 @@ struct xpc_partition {
#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */
/*
* struct xpc_partition IPI_timer #of seconds to wait before checking for
* dropped IPIs. These occur whenever an IPI amo write doesn't complete until
......@@ -526,6 +644,13 @@ struct xpc_partition {
#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ)
/* number of seconds to wait for other partitions to disengage */
#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90
/* interval in seconds to print 'waiting disengagement' messages */
#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0]))
......@@ -534,24 +659,20 @@ struct xpc_partition {
extern struct xpc_registration xpc_registrations[];
/* >>> found in xpc_main.c only */
/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
extern int xpc_disengage_request_timelimit;
extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
extern void xpc_dropped_IPI_check(struct xpc_partition *);
extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int);
extern void xpc_disconnect_wait(int);
/* found in xpc_main.c and efi-xpc.c */
extern void xpc_activate_partition(struct xpc_partition *);
/* found in xpc_partition.c */
extern int xpc_exiting;
extern int xpc_hb_interval;
extern int xpc_hb_check_interval;
extern struct xpc_vars *xpc_vars;
extern struct xpc_rsvd_page *xpc_rsvd_page;
extern struct xpc_vars_part *xpc_vars_part;
......@@ -561,6 +682,7 @@ extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
extern void xpc_allow_IPI_ops(void);
extern void xpc_restrict_IPI_ops(void);
extern int xpc_identify_act_IRQ_sender(void);
extern int xpc_partition_disengaged(struct xpc_partition *);
extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
extern void xpc_mark_partition_inactive(struct xpc_partition *);
extern void xpc_discovery(void);
......@@ -585,8 +707,8 @@ extern void xpc_connected_callout(struct xpc_channel *);
extern void xpc_deliver_msg(struct xpc_channel *);
extern void xpc_disconnect_channel(const int, struct xpc_channel *,
enum xpc_retval, unsigned long *);
extern void xpc_disconnected_callout(struct xpc_channel *);
extern void xpc_partition_down(struct xpc_partition *, enum xpc_retval);
extern void xpc_disconnecting_callout(struct xpc_channel *);
extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
extern void xpc_teardown_infrastructure(struct xpc_partition *);
......@@ -673,6 +795,157 @@ xpc_part_ref(struct xpc_partition *part)
/*
* This next set of inlines are used to keep track of when a partition is
* potentially engaged in accessing memory belonging to another partition.
*/
static inline void
xpc_mark_partition_engaged(struct xpc_partition *part)
{
unsigned long irq_flags;
AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
(XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
local_irq_save(irq_flags);
/* set bit corresponding to our partid in remote partition's AMO */
FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
(1UL << sn_partition_id));
/*
* We must always use the nofault function regardless of whether we
* are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
* didn't, we'd never know that the other partition is down and would
* keep sending IPIs and AMOs to it until the heartbeat times out.
*/
(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
variable), xp_nofault_PIOR_target));
local_irq_restore(irq_flags);
}
static inline void
xpc_mark_partition_disengaged(struct xpc_partition *part)
{
unsigned long irq_flags;
AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
(XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
local_irq_save(irq_flags);
/* clear bit corresponding to our partid in remote partition's AMO */
FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
~(1UL << sn_partition_id));
/*
* We must always use the nofault function regardless of whether we
* are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
* didn't, we'd never know that the other partition is down and would
* keep sending IPIs and AMOs to it until the heartbeat times out.
*/
(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
variable), xp_nofault_PIOR_target));
local_irq_restore(irq_flags);
}
static inline void
xpc_request_partition_disengage(struct xpc_partition *part)
{
unsigned long irq_flags;
AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
(XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
local_irq_save(irq_flags);
/* set bit corresponding to our partid in remote partition's AMO */
FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
(1UL << sn_partition_id));
/*
* We must always use the nofault function regardless of whether we
* are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
* didn't, we'd never know that the other partition is down and would
* keep sending IPIs and AMOs to it until the heartbeat times out.
*/
(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
variable), xp_nofault_PIOR_target));
local_irq_restore(irq_flags);
}
static inline void
xpc_cancel_partition_disengage_request(struct xpc_partition *part)
{
unsigned long irq_flags;
AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
(XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
local_irq_save(irq_flags);
/* clear bit corresponding to our partid in remote partition's AMO */
FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
~(1UL << sn_partition_id));
/*
* We must always use the nofault function regardless of whether we
* are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
* didn't, we'd never know that the other partition is down and would
* keep sending IPIs and AMOs to it until the heartbeat times out.
*/
(void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
variable), xp_nofault_PIOR_target));
local_irq_restore(irq_flags);
}
static inline u64
xpc_partition_engaged(u64 partid_mask)
{
AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
/* return our partition's AMO variable ANDed with partid_mask */
return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
partid_mask);
}
static inline u64
xpc_partition_disengage_requested(u64 partid_mask)
{
AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
/* return our partition's AMO variable ANDed with partid_mask */
return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
partid_mask);
}
static inline void
xpc_clear_partition_engaged(u64 partid_mask)
{
AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
/* clear bit(s) based on partid_mask in our partition's AMO */
FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
~partid_mask);
}
static inline void
xpc_clear_partition_disengage_request(u64 partid_mask)
{
AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
/* clear bit(s) based on partid_mask in our partition's AMO */
FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
~partid_mask);
}
/*
* The following set of macros and inlines are used for the sending and
* receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
......@@ -722,13 +995,13 @@ xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
* Flag the appropriate AMO variable and send an IPI to the specified node.
*/
static inline void
xpc_activate_IRQ_send(u64 amos_page, int from_nasid, int to_nasid,
xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
int to_phys_cpuid)
{
int w_index = XPC_NASID_W_INDEX(from_nasid);
int b_index = XPC_NASID_B_INDEX(from_nasid);
AMO_t *amos = (AMO_t *) __va(amos_page +
(XP_MAX_PARTITIONS * sizeof(AMO_t)));
AMO_t *amos = (AMO_t *) __va(amos_page_pa +
(XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
(void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
......@@ -756,6 +1029,13 @@ xpc_IPI_send_reactivate(struct xpc_partition *part)
xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
}
static inline void
xpc_IPI_send_disengage(struct xpc_partition *part)
{
xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
part->remote_act_nasid, part->remote_act_phys_cpuid);
}
/*
* IPIs associated with SGI_XPC_NOTIFY IRQ.
......@@ -836,6 +1116,7 @@ xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
/* given an AMO variable and a channel#, get its associated IPI flags */
#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff))
#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8))
#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f)
#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010)
......@@ -903,17 +1184,18 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
* cacheable mapping for the entire region. This will prevent speculative
* reading of cached copies of our lines from being issued which will cause
* a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
* (XP_MAX_PARTITIONS) AMO variables for message notification (xpc_main.c)
* and an additional 16 AMO variables for partition activation (xpc_hb.c).
* AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
* additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
* activation and 2 AMO variables for partition deactivation.
*/
static inline AMO_t *
xpc_IPI_init(partid_t partid)
xpc_IPI_init(int index)
{
AMO_t *part_amo = xpc_vars->amos_page + partid;
AMO_t *amo = xpc_vars->amos_page + index;
xpc_IPI_receive(part_amo);
return part_amo;
(void) xpc_IPI_receive(amo); /* clear AMO variable */
return amo;
}
......
arch/ia64/sn/kernel/xpc_channel.c
View file @ 8a212ab6
......@@ -57,6 +57,7 @@ xpc_initialize_channels(struct xpc_partition *part, partid_t partid)
spin_lock_init(&ch->lock);
sema_init(&ch->msg_to_pull_sema, 1); /* mutex */
sema_init(&ch->wdisconnect_sema, 0); /* event wait */
atomic_set(&ch->n_on_msg_allocate_wq, 0);
init_waitqueue_head(&ch->msg_allocate_wq);
......@@ -166,6 +167,7 @@ xpc_setup_infrastructure(struct xpc_partition *part)
xpc_initialize_channels(part, partid);
atomic_set(&part->nchannels_active, 0);
atomic_set(&part->nchannels_engaged, 0);
/* local_IPI_amo were set to 0 by an earlier memset() */
......@@ -555,8 +557,6 @@ xpc_allocate_msgqueues(struct xpc_channel *ch)
sema_init(&ch->notify_queue[i].sema, 0);
}
sema_init(&ch->teardown_sema, 0); /* event wait */
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_SETUP;
spin_unlock_irqrestore(&ch->lock, irq_flags);
......@@ -625,6 +625,55 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
}
/*
* Notify those who wanted to be notified upon delivery of their message.
*/
static void
xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
{
struct xpc_notify *notify;
u8 notify_type;
s64 get = ch->w_remote_GP.get - 1;
while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
notify = &ch->notify_queue[get % ch->local_nentries];
/*
* See if the notify entry indicates it was associated with
* a message who's sender wants to be notified. It is possible
* that it is, but someone else is doing or has done the
* notification.
*/
notify_type = notify->type;
if (notify_type == 0 ||
cmpxchg(&notify->type, notify_type, 0) !=
notify_type) {
continue;
}
DBUG_ON(notify_type != XPC_N_CALL);
atomic_dec(&ch->n_to_notify);
if (notify->func != NULL) {
dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
"msg_number=%ld, partid=%d, channel=%d\n",
(void *) notify, get, ch->partid, ch->number);
notify->func(reason, ch->partid, ch->number,
notify->key);
dev_dbg(xpc_chan, "notify->func() returned, "
"notify=0x%p, msg_number=%ld, partid=%d, "
"channel=%d\n", (void *) notify, get,
ch->partid, ch->number);
}
}
}
/*
* Free up message queues and other stuff that were allocated for the specified
* channel.
......@@ -669,9 +718,6 @@ xpc_free_msgqueues(struct xpc_channel *ch)
ch->remote_msgqueue = NULL;
kfree(ch->notify_queue);
ch->notify_queue = NULL;
/* in case someone is waiting for the teardown to complete */
up(&ch->teardown_sema);
}
}
......@@ -683,7 +729,7 @@ static void
xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
{
struct xpc_partition *part = &xpc_partitions[ch->partid];
u32 ch_flags = ch->flags;
u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED);
DBUG_ON(!spin_is_locked(&ch->lock));
......@@ -701,12 +747,13 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
}
DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0);
/* it's now safe to free the channel's message queues */
xpc_free_msgqueues(ch);
DBUG_ON(ch->flags & XPC_C_SETUP);
if (part->act_state == XPC_P_DEACTIVATING) {
/* can't proceed until the other side disengages from us */
if (xpc_partition_engaged(1UL << ch->partid)) {
return;
}
if (part->act_state != XPC_P_DEACTIVATING) {
} else {
/* as long as the other side is up do the full protocol */
......@@ -724,16 +771,42 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
}
}
/* wake those waiting for notify completion */
if (atomic_read(&ch->n_to_notify) > 0) {
/* >>> we do callout while holding ch->lock */
xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
}
/* both sides are disconnected now */
ch->flags = XPC_C_DISCONNECTED; /* clear all flags, but this one */
/* it's now safe to free the channel's message queues */
xpc_free_msgqueues(ch);
/* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
atomic_dec(&part->nchannels_active);
if (ch_flags & XPC_C_WASCONNECTED) {
if (channel_was_connected) {
dev_info(xpc_chan, "channel %d to partition %d disconnected, "
"reason=%d\n", ch->number, ch->partid, ch->reason);
}
if (ch->flags & XPC_C_WDISCONNECT) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
up(&ch->wdisconnect_sema);
spin_lock_irqsave(&ch->lock, *irq_flags);
} else if (ch->delayed_IPI_flags) {
if (part->act_state != XPC_P_DEACTIVATING) {
/* time to take action on any delayed IPI flags */
spin_lock(&part->IPI_lock);
XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
ch->delayed_IPI_flags);
spin_unlock(&part->IPI_lock);
}
ch->delayed_IPI_flags = 0;
}
}
......@@ -754,6 +827,19 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
spin_lock_irqsave(&ch->lock, irq_flags);
again:
if ((ch->flags & XPC_C_DISCONNECTED) &&
(ch->flags & XPC_C_WDISCONNECT)) {
/*
* Delay processing IPI flags until thread waiting disconnect
* has had a chance to see that the channel is disconnected.
*/
ch->delayed_IPI_flags |= IPI_flags;
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
......@@ -764,7 +850,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
/*
* If RCLOSEREQUEST is set, we're probably waiting for
* RCLOSEREPLY. We should find it and a ROPENREQUEST packed
* with this RCLOSEQREUQEST in the IPI_flags.
* with this RCLOSEREQUEST in the IPI_flags.
*/
if (ch->flags & XPC_C_RCLOSEREQUEST) {
......@@ -779,14 +865,22 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
/* both sides have finished disconnecting */
xpc_process_disconnect(ch, &irq_flags);
DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
goto again;
}
if (ch->flags & XPC_C_DISCONNECTED) {
// >>> explain this section
if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
DBUG_ON(part->act_state !=
XPC_P_DEACTIVATING);
if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
ch_number) & XPC_IPI_OPENREQUEST)) {
DBUG_ON(ch->delayed_IPI_flags != 0);
spin_lock(&part->IPI_lock);
XPC_SET_IPI_FLAGS(part->local_IPI_amo,
ch_number,
XPC_IPI_CLOSEREQUEST);
spin_unlock(&part->IPI_lock);
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
......@@ -816,9 +910,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
}
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
} else {
xpc_process_disconnect(ch, &irq_flags);
DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
xpc_process_disconnect(ch, &irq_flags);
}
......@@ -834,7 +932,20 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
}
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
DBUG_ON(!(ch->flags & XPC_C_RCLOSEREQUEST));
if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
& XPC_IPI_CLOSEREQUEST)) {
DBUG_ON(ch->delayed_IPI_flags != 0);
spin_lock(&part->IPI_lock);
XPC_SET_IPI_FLAGS(part->local_IPI_amo,
ch_number, XPC_IPI_CLOSEREPLY);
spin_unlock(&part->IPI_lock);
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
ch->flags |= XPC_C_RCLOSEREPLY;
......@@ -852,8 +963,14 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
"channel=%d\n", args->msg_size, args->local_nentries,
ch->partid, ch->number);
if ((ch->flags & XPC_C_DISCONNECTING) ||
part->act_state == XPC_P_DEACTIVATING) {
if (part->act_state == XPC_P_DEACTIVATING ||
(ch->flags & XPC_C_ROPENREQUEST)) {
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
......@@ -867,8 +984,11 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
* msg_size = size of channel's messages in bytes
* local_nentries = remote partition's local_nentries
*/
DBUG_ON(args->msg_size == 0);
DBUG_ON(args->local_nentries == 0);
if (args->msg_size == 0 || args->local_nentries == 0) {
/* assume OPENREQUEST was delayed by mistake */
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
ch->remote_nentries = args->local_nentries;
......@@ -906,7 +1026,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
DBUG_ON(!(ch->flags & XPC_C_OPENREQUEST));
if (!(ch->flags & XPC_C_OPENREQUEST)) {
XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
}
DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
DBUG_ON(ch->flags & XPC_C_CONNECTED);
......@@ -960,8 +1086,8 @@ xpc_connect_channel(struct xpc_channel *ch)
struct xpc_registration *registration = &xpc_registrations[ch->number];
if (down_interruptible(&registration->sema) != 0) {
return xpcInterrupted;
if (down_trylock(&registration->sema) != 0) {
return xpcRetry;
}
if (!XPC_CHANNEL_REGISTERED(ch->number)) {
......@@ -1039,55 +1165,6 @@ xpc_connect_channel(struct xpc_channel *ch)
}
/*
* Notify those who wanted to be notified upon delivery of their message.
*/
static void
xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
{
struct xpc_notify *notify;
u8 notify_type;
s64 get = ch->w_remote_GP.get - 1;
while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
notify = &ch->notify_queue[get % ch->local_nentries];
/*
* See if the notify entry indicates it was associated with
* a message who's sender wants to be notified. It is possible
* that it is, but someone else is doing or has done the
* notification.
*/
notify_type = notify->type;
if (notify_type == 0 ||
cmpxchg(&notify->type, notify_type, 0) !=
notify_type) {
continue;
}
DBUG_ON(notify_type != XPC_N_CALL);
atomic_dec(&ch->n_to_notify);
if (notify->func != NULL) {
dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
"msg_number=%ld, partid=%d, channel=%d\n",
(void *) notify, get, ch->partid, ch->number);
notify->func(reason, ch->partid, ch->number,
notify->key);
dev_dbg(xpc_chan, "notify->func() returned, "
"notify=0x%p, msg_number=%ld, partid=%d, "
"channel=%d\n", (void *) notify, get,
ch->partid, ch->number);
}
}
}
/*
* Clear some of the msg flags in the local message queue.
*/
......@@ -1240,6 +1317,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
u64 IPI_amo, IPI_flags;
struct xpc_channel *ch;
int ch_number;
u32 ch_flags;
IPI_amo = xpc_get_IPI_flags(part);
......@@ -1266,8 +1344,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
xpc_process_openclose_IPI(part, ch_number, IPI_flags);
}
ch_flags = ch->flags; /* need an atomic snapshot of flags */
if (ch->flags & XPC_C_DISCONNECTING) {
if (ch_flags & XPC_C_DISCONNECTING) {
spin_lock_irqsave(&ch->lock, irq_flags);
xpc_process_disconnect(ch, &irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
......@@ -1278,9 +1357,9 @@ xpc_process_channel_activity(struct xpc_partition *part)
continue;
}
if (!(ch->flags & XPC_C_CONNECTED)) {
if (!(ch->flags & XPC_C_OPENREQUEST)) {
DBUG_ON(ch->flags & XPC_C_SETUP);
if (!(ch_flags & XPC_C_CONNECTED)) {
if (!(ch_flags & XPC_C_OPENREQUEST)) {
DBUG_ON(ch_flags & XPC_C_SETUP);
(void) xpc_connect_channel(ch);
} else {
spin_lock_irqsave(&ch->lock, irq_flags);
......@@ -1305,8 +1384,8 @@ xpc_process_channel_activity(struct xpc_partition *part)
/*
* XPC's heartbeat code calls this function to inform XPC that a partition has
* gone down. XPC responds by tearing down the XPartition Communication
* XPC's heartbeat code calls this function to inform XPC that a partition is
* going down. XPC responds by tearing down the XPartition Communication
* infrastructure used for the just downed partition.
*
* XPC's heartbeat code will never call this function and xpc_partition_up()
......@@ -1314,7 +1393,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
* at the same time.
*/
void
xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason)
{
unsigned long irq_flags;
int ch_number;
......@@ -1330,12 +1409,11 @@ xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason)
}
/* disconnect all channels associated with the downed partition */
/* disconnect channels associated with the partition going down */
for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
ch = &part->channels[ch_number];
xpc_msgqueue_ref(ch);
spin_lock_irqsave(&ch->lock, irq_flags);
......@@ -1370,6 +1448,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part)
* this partition.
*/
DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
DBUG_ON(atomic_read(&part->nchannels_active) != 0);
DBUG_ON(part->setup_state != XPC_P_SETUP);
part->setup_state = XPC_P_WTEARDOWN;
......@@ -1428,19 +1507,11 @@ xpc_initiate_connect(int ch_number)
if (xpc_part_ref(part)) {
ch = &part->channels[ch_number];
if (!(ch->flags & XPC_C_DISCONNECTING)) {
DBUG_ON(ch->flags & XPC_C_OPENREQUEST);
DBUG_ON(ch->flags & XPC_C_CONNECTED);
DBUG_ON(ch->flags & XPC_C_SETUP);
/*
* Initiate the establishment of a connection
* on the newly registered channel to the
* remote partition.
*/
xpc_wakeup_channel_mgr(part);
}
/*
* Initiate the establishment of a connection on the
* newly registered channel to the remote partition.
*/
xpc_wakeup_channel_mgr(part);
xpc_part_deref(part);
}
}
......@@ -1450,9 +1521,6 @@ xpc_initiate_connect(int ch_number)
void
xpc_connected_callout(struct xpc_channel *ch)
{
unsigned long irq_flags;
/* let the registerer know that a connection has been established */
if (ch->func != NULL) {
......@@ -1465,10 +1533,6 @@ xpc_connected_callout(struct xpc_channel *ch)
dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
}
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_CONNECTCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
......@@ -1506,8 +1570,12 @@ xpc_initiate_disconnect(int ch_number)
spin_lock_irqsave(&ch->lock, irq_flags);
XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
if (!(ch->flags & XPC_C_DISCONNECTED)) {
ch->flags |= XPC_C_WDISCONNECT;
XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
&irq_flags);
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
......@@ -1523,8 +1591,9 @@ xpc_initiate_disconnect(int ch_number)
/*
* To disconnect a channel, and reflect it back to all who may be waiting.
*
* >>> An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
* >>> xpc_free_msgqueues().
* An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by
* xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by
* xpc_disconnect_wait().
*
* THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN.
*/
......@@ -1532,7 +1601,7 @@ void
xpc_disconnect_channel(const int line, struct xpc_channel *ch,
enum xpc_retval reason, unsigned long *irq_flags)
{
u32 flags;
u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
DBUG_ON(!spin_is_locked(&ch->lock));
......@@ -1547,61 +1616,53 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
XPC_SET_REASON(ch, reason, line);
flags = ch->flags;
ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
/* some of these may not have been set */
ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY |
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING);
xpc_IPI_send_closerequest(ch, irq_flags);
if (flags & XPC_C_CONNECTED) {
if (channel_was_connected) {
ch->flags |= XPC_C_WASCONNECTED;
}
spin_unlock_irqrestore(&ch->lock, *irq_flags);
/* wake all idle kthreads so they can exit */
if (atomic_read(&ch->kthreads_idle) > 0) {
/* wake all idle kthreads so they can exit */
wake_up_all(&ch->idle_wq);
}
spin_unlock_irqrestore(&ch->lock, *irq_flags);
/* wake those waiting to allocate an entry from the local msg queue */
if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) {
wake_up(&ch->msg_allocate_wq);
}
/* wake those waiting for notify completion */
if (atomic_read(&ch->n_to_notify) > 0) {
xpc_notify_senders(ch, reason, ch->w_local_GP.put);
}
spin_lock_irqsave(&ch->lock, *irq_flags);
}
void
xpc_disconnected_callout(struct xpc_channel *ch)
xpc_disconnecting_callout(struct xpc_channel *ch)
{
/*
* Let the channel's registerer know that the channel is now
* Let the channel's registerer know that the channel is being
* disconnected. We don't want to do this if the registerer was never
* informed of a connection being made, unless the disconnect was for
* abnormal reasons.
* informed of a connection being made.
*/
if (ch->func != NULL) {
dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, "
"channel=%d\n", ch->reason, ch->partid, ch->number);
dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting,"
" partid=%d, channel=%d\n", ch->partid, ch->number);
ch->func(ch->reason, ch->partid, ch->number, NULL, ch->key);
ch->func(xpcDisconnecting, ch->partid, ch->number, NULL,
ch->key);
dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, "
"channel=%d\n", ch->reason, ch->partid, ch->number);
dev_dbg(xpc_chan, "ch->func() returned, reason="
"xpcDisconnecting, partid=%d, channel=%d\n",
ch->partid, ch->number);
}
}
......@@ -1848,7 +1909,7 @@ xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
xpc_notify_func func, void *key)
{
enum xpc_retval ret = xpcSuccess;
struct xpc_notify *notify = NULL; // >>> to keep the compiler happy!!
struct xpc_notify *notify = notify;
s64 put, msg_number = msg->number;
......
arch/ia64/sn/kernel/xpc_main.c
View file @ 8a212ab6
......@@ -54,6 +54,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/reboot.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn_sal.h>
#include <asm/uaccess.h>
......@@ -82,11 +83,17 @@ struct device *xpc_chan = &xpc_chan_dbg_subname;
/* systune related variables for /proc/sys directories */
static int xpc_hb_min = 1;
static int xpc_hb_max = 10;
static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
static int xpc_hb_min_interval = 1;
static int xpc_hb_max_interval = 10;
static int xpc_hb_check_min = 10;
static int xpc_hb_check_max = 120;
static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
static int xpc_hb_check_min_interval = 10;
static int xpc_hb_check_max_interval = 120;
int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
static int xpc_disengage_request_min_timelimit = 0;
static int xpc_disengage_request_max_timelimit = 120;
static ctl_table xpc_sys_xpc_hb_dir[] = {
{
......@@ -99,7 +106,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
&proc_dointvec_minmax,
&sysctl_intvec,
NULL,
&xpc_hb_min, &xpc_hb_max
&xpc_hb_min_interval,
&xpc_hb_max_interval
},
{
2,
......@@ -111,7 +119,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = {
&proc_dointvec_minmax,
&sysctl_intvec,
NULL,
&xpc_hb_check_min, &xpc_hb_check_max
&xpc_hb_check_min_interval,
&xpc_hb_check_max_interval
},
{0}
};
......@@ -124,6 +133,19 @@ static ctl_table xpc_sys_xpc_dir[] = {
0555,
xpc_sys_xpc_hb_dir
},
{
2,
"disengage_request_timelimit",
&xpc_disengage_request_timelimit,
sizeof(int),
0644,
NULL,
&proc_dointvec_minmax,
&sysctl_intvec,
NULL,
&xpc_disengage_request_min_timelimit,
&xpc_disengage_request_max_timelimit
},
{0}
};
static ctl_table xpc_sys_dir[] = {
......@@ -148,10 +170,10 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
static unsigned long xpc_hb_check_timeout;
/* xpc_hb_checker thread exited notification */
/* notification that the xpc_hb_checker thread has exited */
static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited);
/* xpc_discovery thread exited notification */
/* notification that the xpc_discovery thread has exited */
static DECLARE_MUTEX_LOCKED(xpc_discovery_exited);
......@@ -161,6 +183,30 @@ static struct timer_list xpc_hb_timer;
static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
static struct notifier_block xpc_reboot_notifier = {
.notifier_call = xpc_system_reboot,
};
/*
* Timer function to enforce the timelimit on the partition disengage request.
*/
static void
xpc_timeout_partition_disengage_request(unsigned long data)
{
struct xpc_partition *part = (struct xpc_partition *) data;
DBUG_ON(jiffies < part->disengage_request_timeout);
(void) xpc_partition_disengaged(part);
DBUG_ON(part->disengage_request_timeout != 0);
DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
}
/*
* Notify the heartbeat check thread that an IRQ has been received.
*/
......@@ -214,12 +260,6 @@ xpc_hb_checker(void *ignore)
while (!(volatile int) xpc_exiting) {
/* wait for IRQ or timeout */
(void) wait_event_interruptible(xpc_act_IRQ_wq,
(last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
jiffies >= xpc_hb_check_timeout ||
(volatile int) xpc_exiting));
dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
"been received\n",
(int) (xpc_hb_check_timeout - jiffies),
......@@ -240,6 +280,7 @@ xpc_hb_checker(void *ignore)
}
/* check for outstanding IRQs */
new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
force_IRQ = 0;
......@@ -257,12 +298,18 @@ xpc_hb_checker(void *ignore)
xpc_hb_check_timeout = jiffies +
(xpc_hb_check_interval * HZ);
}
/* wait for IRQ or timeout */
(void) wait_event_interruptible(xpc_act_IRQ_wq,
(last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
jiffies >= xpc_hb_check_timeout ||
(volatile int) xpc_exiting));
}
dev_dbg(xpc_part, "heartbeat checker is exiting\n");
/* mark this thread as inactive */
/* mark this thread as having exited */
up(&xpc_hb_checker_exited);
return 0;
}
......@@ -282,7 +329,7 @@ xpc_initiate_discovery(void *ignore)
dev_dbg(xpc_part, "discovery thread is exiting\n");
/* mark this thread as inactive */
/* mark this thread as having exited */
up(&xpc_discovery_exited);
return 0;
}
......@@ -309,7 +356,7 @@ xpc_make_first_contact(struct xpc_partition *part)
"partition %d\n", XPC_PARTID(part));
/* wait a 1/4 of a second or so */
msleep_interruptible(250);
(void) msleep_interruptible(250);
if (part->act_state == XPC_P_DEACTIVATING) {
return part->reason;
......@@ -336,7 +383,8 @@ static void
xpc_channel_mgr(struct xpc_partition *part)
{
while (part->act_state != XPC_P_DEACTIVATING ||
atomic_read(&part->nchannels_active) > 0) {
atomic_read(&part->nchannels_active) > 0 ||
!xpc_partition_disengaged(part)) {
xpc_process_channel_activity(part);
......@@ -360,7 +408,8 @@ xpc_channel_mgr(struct xpc_partition *part)
(volatile u64) part->local_IPI_amo != 0 ||
((volatile u8) part->act_state ==
XPC_P_DEACTIVATING &&
atomic_read(&part->nchannels_active) == 0)));
atomic_read(&part->nchannels_active) == 0 &&
xpc_partition_disengaged(part))));
atomic_set(&part->channel_mgr_requests, 1);
// >>> Does it need to wakeup periodically as well? In case we
......@@ -482,7 +531,7 @@ xpc_activating(void *__partid)
return 0;
}
XPC_ALLOW_HB(partid, xpc_vars);
xpc_allow_hb(partid, xpc_vars);
xpc_IPI_send_activated(part);
......@@ -492,6 +541,7 @@ xpc_activating(void *__partid)
*/
(void) xpc_partition_up(part);
xpc_disallow_hb(partid, xpc_vars);
xpc_mark_partition_inactive(part);
if (part->reason == xpcReactivating) {
......@@ -670,6 +720,7 @@ xpc_daemonize_kthread(void *args)
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
int n_needed;
unsigned long irq_flags;
daemonize("xpc%02dc%d", partid, ch_number);
......@@ -680,11 +731,14 @@ xpc_daemonize_kthread(void *args)
ch = &part->channels[ch_number];
if (!(ch->flags & XPC_C_DISCONNECTING)) {
DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
/* let registerer know that connection has been established */
if (atomic_read(&ch->kthreads_assigned) == 1) {
spin_lock_irqsave(&ch->lock, irq_flags);
if (!(ch->flags & XPC_C_CONNECTCALLOUT)) {
ch->flags |= XPC_C_CONNECTCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
xpc_connected_callout(ch);
/*
......@@ -699,16 +753,28 @@ xpc_daemonize_kthread(void *args)
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_activate_kthreads(ch, n_needed);
}
} else {
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
xpc_kthread_waitmsgs(part, ch);
}
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
((ch->flags & XPC_C_CONNECTCALLOUT) ||
(ch->reason != xpcUnregistering &&
ch->reason != xpcOtherUnregistering))) {
xpc_disconnected_callout(ch);
if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
spin_lock_irqsave(&ch->lock, irq_flags);
if ((ch->flags & XPC_C_CONNECTCALLOUT) &&
!(ch->flags & XPC_C_DISCONNECTCALLOUT)) {
ch->flags |= XPC_C_DISCONNECTCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
xpc_disconnecting_callout(ch);
} else {
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
if (atomic_dec_return(&part->nchannels_engaged) == 0) {
xpc_mark_partition_disengaged(part);
xpc_IPI_send_disengage(part);
}
}
......@@ -740,12 +806,33 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
unsigned long irq_flags;
pid_t pid;
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
struct xpc_partition *part = &xpc_partitions[ch->partid];
while (needed-- > 0) {
/*
* The following is done on behalf of the newly created
* kthread. That kthread is responsible for doing the
* counterpart to the following before it exits.
*/
(void) xpc_part_ref(part);
xpc_msgqueue_ref(ch);
if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
atomic_inc_return(&part->nchannels_engaged) == 1) {
xpc_mark_partition_engaged(part);
}
pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0);
if (pid < 0) {
/* the fork failed */
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
xpc_mark_partition_disengaged(part);
xpc_IPI_send_disengage(part);
}
xpc_msgqueue_deref(ch);
xpc_part_deref(part);
if (atomic_read(&ch->kthreads_assigned) <
ch->kthreads_idle_limit) {
......@@ -765,14 +852,6 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
break;
}
/*
* The following is done on behalf of the newly created
* kthread. That kthread is responsible for doing the
* counterpart to the following before it exits.
*/
(void) xpc_part_ref(&xpc_partitions[ch->partid]);
xpc_msgqueue_ref(ch);
atomic_inc(&ch->kthreads_assigned);
ch->kthreads_created++; // >>> temporary debug only!!!
}
}
......@@ -781,87 +860,142 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed)
void
xpc_disconnect_wait(int ch_number)
{
unsigned long irq_flags;
partid_t partid;
struct xpc_partition *part;
struct xpc_channel *ch;
int wakeup_channel_mgr;
/* now wait for all callouts to the caller's function to cease */
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
part = &xpc_partitions[partid];
if (xpc_part_ref(part)) {
ch = &part->channels[ch_number];
if (!xpc_part_ref(part)) {
continue;
}
// >>> how do we keep from falling into the window between our check and going
// >>> down and coming back up where sema is re-inited?
if (ch->flags & XPC_C_SETUP) {
(void) down(&ch->teardown_sema);
}
ch = &part->channels[ch_number];
if (!(ch->flags & XPC_C_WDISCONNECT)) {
xpc_part_deref(part);
continue;
}
(void) down(&ch->wdisconnect_sema);
spin_lock_irqsave(&ch->lock, irq_flags);
DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
wakeup_channel_mgr = 0;
if (ch->delayed_IPI_flags) {
if (part->act_state != XPC_P_DEACTIVATING) {
spin_lock(&part->IPI_lock);
XPC_SET_IPI_FLAGS(part->local_IPI_amo,
ch->number, ch->delayed_IPI_flags);
spin_unlock(&part->IPI_lock);
wakeup_channel_mgr = 1;
}
ch->delayed_IPI_flags = 0;
}
ch->flags &= ~XPC_C_WDISCONNECT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
if (wakeup_channel_mgr) {
xpc_wakeup_channel_mgr(part);
}
xpc_part_deref(part);
}
}
static void
xpc_do_exit(void)
xpc_do_exit(enum xpc_retval reason)
{
partid_t partid;
int active_part_count;
struct xpc_partition *part;
unsigned long printmsg_time;
/* now it's time to eliminate our heartbeat */
del_timer_sync(&xpc_hb_timer);
xpc_vars->heartbeating_to_mask = 0;
/* indicate to others that our reserved page is uninitialized */
xpc_rsvd_page->vars_pa = 0;
/*
* Ignore all incoming interrupts. Without interupts the heartbeat
* checker won't activate any new partitions that may come up.
*/
free_irq(SGI_XPC_ACTIVATE, NULL);
/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
DBUG_ON(xpc_exiting == 1);
/*
* Cause the heartbeat checker and the discovery threads to exit.
* We don't want them attempting to activate new partitions as we
* try to deactivate the existing ones.
* Let the heartbeat checker thread and the discovery thread
* (if one is running) know that they should exit. Also wake up
* the heartbeat checker thread in case it's sleeping.
*/
xpc_exiting = 1;
wake_up_interruptible(&xpc_act_IRQ_wq);
/* wait for the heartbeat checker thread to mark itself inactive */
down(&xpc_hb_checker_exited);
/* ignore all incoming interrupts */
free_irq(SGI_XPC_ACTIVATE, NULL);
/* wait for the discovery thread to mark itself inactive */
/* wait for the discovery thread to exit */
down(&xpc_discovery_exited);
/* wait for the heartbeat checker thread to exit */
down(&xpc_hb_checker_exited);
msleep_interruptible(300);
/* sleep for a 1/3 of a second or so */
(void) msleep_interruptible(300);
/* wait for all partitions to become inactive */
printmsg_time = jiffies;
do {
active_part_count = 0;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
part = &xpc_partitions[partid];
if (part->act_state != XPC_P_INACTIVE) {
active_part_count++;
XPC_DEACTIVATE_PARTITION(part, xpcUnloading);
if (xpc_partition_disengaged(part) &&
part->act_state == XPC_P_INACTIVE) {
continue;
}
active_part_count++;
XPC_DEACTIVATE_PARTITION(part, reason);
}
if (active_part_count)
msleep_interruptible(300);
} while (active_part_count > 0);
if (active_part_count == 0) {
break;
}
if (jiffies >= printmsg_time) {
dev_info(xpc_part, "waiting for partitions to "
"deactivate/disengage, active count=%d, remote "
"engaged=0x%lx\n", active_part_count,
xpc_partition_engaged(1UL << partid));
printmsg_time = jiffies +
(XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
}
/* sleep for a 1/3 of a second or so */
(void) msleep_interruptible(300);
} while (1);
DBUG_ON(xpc_partition_engaged(-1UL));
/* indicate to others that our reserved page is uninitialized */
xpc_rsvd_page->vars_pa = 0;
/* now it's time to eliminate our heartbeat */
del_timer_sync(&xpc_hb_timer);
DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
/* take ourselves off of the reboot_notifier_list */
(void) unregister_reboot_notifier(&xpc_reboot_notifier);
/* close down protections for IPI operations */
xpc_restrict_IPI_ops();
......@@ -876,6 +1010,34 @@ xpc_do_exit(void)
}
/*
* This function is called when the system is being rebooted.
*/
static int
xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
{
enum xpc_retval reason;
switch (event) {
case SYS_RESTART:
reason = xpcSystemReboot;
break;
case SYS_HALT:
reason = xpcSystemHalt;
break;
case SYS_POWER_OFF:
reason = xpcSystemPoweroff;
break;
default:
reason = xpcSystemGoingDown;
}
xpc_do_exit(reason);
return NOTIFY_DONE;
}
int __init
xpc_init(void)
{
......@@ -891,11 +1053,11 @@ xpc_init(void)
/*
* xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
* both a partition's reserved page and its XPC variables. Its size was
* based on the size of a reserved page. So we need to ensure that the
* XPC variables will fit as well.
* various portions of a partition's reserved page. Its size is based
* on the size of the reserved page header and part_nasids mask. So we
* need to ensure that the other items will fit as well.
*/
if (XPC_VARS_ALIGNED_SIZE > XPC_RSVD_PAGE_ALIGNED_SIZE) {
if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
return -EPERM;
}
......@@ -924,6 +1086,12 @@ xpc_init(void)
spin_lock_init(&part->act_lock);
part->act_state = XPC_P_INACTIVE;
XPC_SET_REASON(part, 0, 0);
init_timer(&part->disengage_request_timer);
part->disengage_request_timer.function =
xpc_timeout_partition_disengage_request;
part->disengage_request_timer.data = (unsigned long) part;
part->setup_state = XPC_P_UNSET;
init_waitqueue_head(&part->teardown_wq);
atomic_set(&part->references, 0);
......@@ -980,6 +1148,13 @@ xpc_init(void)
}
/* add ourselves to the reboot_notifier_list */
ret = register_reboot_notifier(&xpc_reboot_notifier);
if (ret != 0) {
dev_warn(xpc_part, "can't register reboot notifier\n");
}
/*
* Set the beating to other partitions into motion. This is
* the last requirement for other partitions' discovery to
......@@ -1001,6 +1176,9 @@ xpc_init(void)
/* indicate to others that our reserved page is uninitialized */
xpc_rsvd_page->vars_pa = 0;
/* take ourselves off of the reboot_notifier_list */
(void) unregister_reboot_notifier(&xpc_reboot_notifier);
del_timer_sync(&xpc_hb_timer);
free_irq(SGI_XPC_ACTIVATE, NULL);
xpc_restrict_IPI_ops();
......@@ -1024,7 +1202,7 @@ xpc_init(void)
/* mark this new thread as a non-starter */
up(&xpc_discovery_exited);
xpc_do_exit();
xpc_do_exit(xpcUnloading);
return -EBUSY;
}
......@@ -1043,7 +1221,7 @@ module_init(xpc_init);
void __exit
xpc_exit(void)
{
xpc_do_exit();
xpc_do_exit(xpcUnloading);
}
module_exit(xpc_exit);
......@@ -1060,3 +1238,7 @@ module_param(xpc_hb_check_interval, int, 0);
MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
"heartbeat checks.");
module_param(xpc_disengage_request_timelimit, int, 0);
MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
"for disengage request to complete.");
arch/ia64/sn/kernel/xpc_partition.c
View file @ 8a212ab6
......@@ -44,16 +44,19 @@ static u64 xpc_sh2_IPI_access3;
/* original protection values for each node */
u64 xpc_prot_vec[MAX_COMPACT_NODES];
u64 xpc_prot_vec[MAX_NUMNODES];
/* this partition's reserved page */
/* this partition's reserved page pointers */
struct xpc_rsvd_page *xpc_rsvd_page;
/* this partition's XPC variables (within the reserved page) */
static u64 *xpc_part_nasids;
static u64 *xpc_mach_nasids;
struct xpc_vars *xpc_vars;
struct xpc_vars_part *xpc_vars_part;
static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */
static int xp_nasid_mask_words; /* actual size in words of nasid mask */
/*
* For performance reasons, each entry of xpc_partitions[] is cacheline
......@@ -65,20 +68,16 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
/*
* Generic buffer used to store a local copy of the remote partitions
* reserved page or XPC variables.
* Generic buffer used to store a local copy of portions of a remote
* partition's reserved page (either its header and part_nasids mask,
* or its vars).
*
* xpc_discovery runs only once and is a seperate thread that is
* very likely going to be processing in parallel with receiving
* interrupts.
*/
char ____cacheline_aligned
xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE];
/* systune related variables */
int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
XP_NASID_MASK_BYTES];
/*
......@@ -86,13 +85,16 @@ int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT;
* for that nasid. This function returns 0 on any error.
*/
static u64
xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
xpc_get_rsvd_page_pa(int nasid)
{
bte_result_t bte_res;
s64 status;
u64 cookie = 0;
u64 rp_pa = nasid; /* seed with nasid */
u64 len = 0;
u64 buf = buf;
u64 buf_len = 0;
void *buf_base = NULL;
while (1) {
......@@ -108,13 +110,22 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
break;
}
if (len > buf_size) {
dev_err(xpc_part, "len (=0x%016lx) > buf_size\n", len);
status = SALRET_ERROR;
break;
if (L1_CACHE_ALIGN(len) > buf_len) {
if (buf_base != NULL) {
kfree(buf_base);
}
buf_len = L1_CACHE_ALIGN(len);
buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len,
GFP_KERNEL, &buf_base);
if (buf_base == NULL) {
dev_err(xpc_part, "unable to kmalloc "
"len=0x%016lx\n", buf_len);
status = SALRET_ERROR;
break;
}
}
bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_size,
bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bte_res != BTE_SUCCESS) {
dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
......@@ -123,6 +134,10 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size)
}
}
if (buf_base != NULL) {
kfree(buf_base);
}
if (status != SALRET_OK) {
rp_pa = 0;
}
......@@ -141,15 +156,15 @@ xpc_rsvd_page_init(void)
{
struct xpc_rsvd_page *rp;
AMO_t *amos_page;
u64 rp_pa, next_cl, nasid_array = 0;
u64 rp_pa, nasid_array = 0;
int i, ret;
/* get the local reserved page's address */
rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0),
(u64) xpc_remote_copy_buffer,
XPC_RSVD_PAGE_ALIGNED_SIZE);
preempt_disable();
rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
preempt_enable();
if (rp_pa == 0) {
dev_err(xpc_part, "SAL failed to locate the reserved page\n");
return NULL;
......@@ -164,12 +179,19 @@ xpc_rsvd_page_init(void)
rp->version = XPC_RP_VERSION;
/*
* Place the XPC variables on the cache line following the
* reserved page structure.
*/
next_cl = (u64) rp + XPC_RSVD_PAGE_ALIGNED_SIZE;
xpc_vars = (struct xpc_vars *) next_cl;
/* establish the actual sizes of the nasid masks */
if (rp->SAL_version == 1) {
/* SAL_version 1 didn't set the nasids_size field */
rp->nasids_size = 128;
}
xp_nasid_mask_bytes = rp->nasids_size;
xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
/* setup the pointers to the various items in the reserved page */
xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
xpc_vars = XPC_RP_VARS(rp);
xpc_vars_part = XPC_RP_VARS_PART(rp);
/*
* Before clearing xpc_vars, see if a page of AMOs had been previously
......@@ -221,33 +243,32 @@ xpc_rsvd_page_init(void)
amos_page = (AMO_t *) TO_AMO((u64) amos_page);
}
/* clear xpc_vars */
memset(xpc_vars, 0, sizeof(struct xpc_vars));
/*
* Place the XPC per partition specific variables on the cache line
* following the XPC variables structure.
*/
next_cl += XPC_VARS_ALIGNED_SIZE;
memset((u64 *) next_cl, 0, sizeof(struct xpc_vars_part) *
XP_MAX_PARTITIONS);
xpc_vars_part = (struct xpc_vars_part *) next_cl;
xpc_vars->vars_part_pa = __pa(next_cl);
xpc_vars->version = XPC_V_VERSION;
xpc_vars->act_nasid = cpuid_to_nasid(0);
xpc_vars->act_phys_cpuid = cpu_physical_id(0);
xpc_vars->vars_part_pa = __pa(xpc_vars_part);
xpc_vars->amos_page_pa = ia64_tpa((u64) amos_page);
xpc_vars->amos_page = amos_page; /* save for next load of XPC */
/*
* Initialize the activation related AMO variables.
*/
xpc_vars->act_amos = xpc_IPI_init(XP_MAX_PARTITIONS);
for (i = 1; i < XP_NASID_MASK_WORDS; i++) {
xpc_IPI_init(i + XP_MAX_PARTITIONS);
/* clear xpc_vars_part */
memset((u64 *) xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
XP_MAX_PARTITIONS);
/* initialize the activate IRQ related AMO variables */
for (i = 0; i < xp_nasid_mask_words; i++) {
(void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
}
/* export AMO page's physical address to other partitions */
xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page);
/* initialize the engaged remote partitions related AMO variables */
(void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
(void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
/* timestamp of when reserved page was setup by XPC */
rp->stamp = CURRENT_TIME;
/*
* This signifies to the remote partition that our reserved
......@@ -387,6 +408,11 @@ xpc_check_remote_hb(void)
remote_vars = (struct xpc_vars *) xpc_remote_copy_buffer;
for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
if (xpc_exiting) {
break;
}
if (partid == sn_partition_id) {
continue;
}
......@@ -401,7 +427,7 @@ xpc_check_remote_hb(void)
/* pull the remote_hb cache line */
bres = xp_bte_copy(part->remote_vars_pa,
ia64_tpa((u64) remote_vars),
XPC_VARS_ALIGNED_SIZE,
XPC_RP_VARS_SIZE,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
XPC_DEACTIVATE_PARTITION(part,
......@@ -417,7 +443,7 @@ xpc_check_remote_hb(void)
if (((remote_vars->heartbeat == part->last_heartbeat) &&
(remote_vars->kdb_status == 0)) ||
!XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
!xpc_hb_allowed(sn_partition_id, remote_vars)) {
XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat);
continue;
......@@ -429,31 +455,31 @@ xpc_check_remote_hb(void)
/*
* Get a copy of the remote partition's rsvd page.
* Get a copy of a portion of the remote partition's rsvd page.
*
* remote_rp points to a buffer that is cacheline aligned for BTE copies and
* assumed to be of size XPC_RSVD_PAGE_ALIGNED_SIZE.
* is large enough to contain a copy of their reserved page header and
* part_nasids mask.
*/
static enum xpc_retval
xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
struct xpc_rsvd_page *remote_rp, u64 *remote_rsvd_page_pa)
struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
{
int bres, i;
/* get the reserved page's physical address */
*remote_rsvd_page_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp,
XPC_RSVD_PAGE_ALIGNED_SIZE);
if (*remote_rsvd_page_pa == 0) {
*remote_rp_pa = xpc_get_rsvd_page_pa(nasid);
if (*remote_rp_pa == 0) {
return xpcNoRsvdPageAddr;
}
/* pull over the reserved page structure */
/* pull over the reserved page header and part_nasids mask */
bres = xp_bte_copy(*remote_rsvd_page_pa, ia64_tpa((u64) remote_rp),
XPC_RSVD_PAGE_ALIGNED_SIZE,
bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
return xpc_map_bte_errors(bres);
......@@ -461,8 +487,11 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
if (discovered_nasids != NULL) {
for (i = 0; i < XP_NASID_MASK_WORDS; i++) {
discovered_nasids[i] |= remote_rp->part_nasids[i];
u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
for (i = 0; i < xp_nasid_mask_words; i++) {
discovered_nasids[i] |= remote_part_nasids[i];
}
}
......@@ -489,10 +518,10 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
/*
* Get a copy of the remote partition's XPC variables.
* Get a copy of the remote partition's XPC variables from the reserved page.
*
* remote_vars points to a buffer that is cacheline aligned for BTE copies and
* assumed to be of size XPC_VARS_ALIGNED_SIZE.
* assumed to be of size XPC_RP_VARS_SIZE.
*/
static enum xpc_retval
xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
......@@ -508,7 +537,7 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
/* pull over the cross partition variables */
bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
XPC_VARS_ALIGNED_SIZE,
XPC_RP_VARS_SIZE,
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
if (bres != BTE_SUCCESS) {
return xpc_map_bte_errors(bres);
......@@ -524,7 +553,56 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
/*
* Prior code has determine the nasid which generated an IPI. Inspect
* Update the remote partition's info.
*/
static void
xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
struct timespec *remote_rp_stamp, u64 remote_rp_pa,
u64 remote_vars_pa, struct xpc_vars *remote_vars)
{
part->remote_rp_version = remote_rp_version;
dev_dbg(xpc_part, " remote_rp_version = 0x%016lx\n",
part->remote_rp_version);
part->remote_rp_stamp = *remote_rp_stamp;
dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
part->remote_rp_pa = remote_rp_pa;
dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
part->remote_vars_pa = remote_vars_pa;
dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
part->remote_vars_pa);
part->last_heartbeat = remote_vars->heartbeat;
dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
part->last_heartbeat);
part->remote_vars_part_pa = remote_vars->vars_part_pa;
dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
part->remote_vars_part_pa);
part->remote_act_nasid = remote_vars->act_nasid;
dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n",
part->remote_act_nasid);
part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n",
part->remote_act_phys_cpuid);
part->remote_amos_page_pa = remote_vars->amos_page_pa;
dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
part->remote_amos_page_pa);
part->remote_vars_version = remote_vars->version;
dev_dbg(xpc_part, " remote_vars_version = 0x%x\n",
part->remote_vars_version);
}
/*
* Prior code has determined the nasid which generated an IPI. Inspect
* that nasid to determine if its partition needs to be activated or
* deactivated.
*
......@@ -542,8 +620,12 @@ xpc_identify_act_IRQ_req(int nasid)
{
struct xpc_rsvd_page *remote_rp;
struct xpc_vars *remote_vars;
u64 remote_rsvd_page_pa;
u64 remote_rp_pa;
u64 remote_vars_pa;
int remote_rp_version;
int reactivate = 0;
int stamp_diff;
struct timespec remote_rp_stamp = { 0, 0 };
partid_t partid;
struct xpc_partition *part;
enum xpc_retval ret;
......@@ -553,7 +635,7 @@ xpc_identify_act_IRQ_req(int nasid)
remote_rp = (struct xpc_rsvd_page *) xpc_remote_copy_buffer;
ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rsvd_page_pa);
ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
if (ret != xpcSuccess) {
dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
"which sent interrupt, reason=%d\n", nasid, ret);
......@@ -561,6 +643,10 @@ xpc_identify_act_IRQ_req(int nasid)
}
remote_vars_pa = remote_rp->vars_pa;
remote_rp_version = remote_rp->version;
if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
remote_rp_stamp = remote_rp->stamp;
}
partid = remote_rp->partid;
part = &xpc_partitions[partid];
......@@ -586,44 +672,117 @@ xpc_identify_act_IRQ_req(int nasid)
"%ld:0x%lx\n", (int) nasid, (int) partid, part->act_IRQ_rcvd,
remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
if (xpc_partition_disengaged(part) &&
part->act_state == XPC_P_INACTIVE) {
if (part->act_state == XPC_P_INACTIVE) {
xpc_update_partition_info(part, remote_rp_version,
&remote_rp_stamp, remote_rp_pa,
remote_vars_pa, remote_vars);
part->remote_rp_pa = remote_rsvd_page_pa;
dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n",
part->remote_rp_pa);
if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
if (xpc_partition_disengage_requested(1UL << partid)) {
/*
* Other side is waiting on us to disengage,
* even though we already have.
*/
return;
}
} else {
/* other side doesn't support disengage requests */
xpc_clear_partition_disengage_request(1UL << partid);
}
part->remote_vars_pa = remote_vars_pa;
dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
part->remote_vars_pa);
xpc_activate_partition(part);
return;
}
part->last_heartbeat = remote_vars->heartbeat;
dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
part->last_heartbeat);
DBUG_ON(part->remote_rp_version == 0);
DBUG_ON(part->remote_vars_version == 0);
if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
remote_vars_version));
if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
version));
/* see if the other side rebooted */
if (part->remote_amos_page_pa ==
remote_vars->amos_page_pa &&
xpc_hb_allowed(sn_partition_id,
remote_vars)) {
/* doesn't look that way, so ignore the IPI */
return;
}
}
part->remote_vars_part_pa = remote_vars->vars_part_pa;
dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n",
part->remote_vars_part_pa);
/*
* Other side rebooted and previous XPC didn't support the
* disengage request, so we don't need to do anything special.
*/
part->remote_act_nasid = remote_vars->act_nasid;
dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n",
part->remote_act_nasid);
xpc_update_partition_info(part, remote_rp_version,
&remote_rp_stamp, remote_rp_pa,
remote_vars_pa, remote_vars);
part->reactivate_nasid = nasid;
XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
return;
}
part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n",
part->remote_act_phys_cpuid);
DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
part->remote_amos_page_pa = remote_vars->amos_page_pa;
dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n",
part->remote_amos_page_pa);
if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
xpc_activate_partition(part);
/*
* Other side rebooted and previous XPC did support the
* disengage request, but the new one doesn't.
*/
xpc_clear_partition_engaged(1UL << partid);
xpc_clear_partition_disengage_request(1UL << partid);
} else if (part->remote_amos_page_pa != remote_vars->amos_page_pa ||
!XPC_HB_ALLOWED(sn_partition_id, remote_vars)) {
xpc_update_partition_info(part, remote_rp_version,
&remote_rp_stamp, remote_rp_pa,
remote_vars_pa, remote_vars);
reactivate = 1;
} else {
DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
&remote_rp_stamp);
if (stamp_diff != 0) {
DBUG_ON(stamp_diff >= 0);
/*
* Other side rebooted and the previous XPC did support
* the disengage request, as does the new one.
*/
DBUG_ON(xpc_partition_engaged(1UL << partid));
DBUG_ON(xpc_partition_disengage_requested(1UL <<
partid));
xpc_update_partition_info(part, remote_rp_version,
&remote_rp_stamp, remote_rp_pa,
remote_vars_pa, remote_vars);
reactivate = 1;
}
}
if (!xpc_partition_disengaged(part)) {
/* still waiting on other side to disengage from us */
return;
}
if (reactivate) {
part->reactivate_nasid = nasid;
XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
xpc_partition_disengage_requested(1UL << partid)) {
XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown);
}
}
......@@ -643,14 +802,17 @@ xpc_identify_act_IRQ_sender(void)
u64 nasid; /* remote nasid */
int n_IRQs_detected = 0;
AMO_t *act_amos;
struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
act_amos = xpc_vars->act_amos;
act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
/* scan through act AMO variable looking for non-zero entries */
for (word = 0; word < XP_NASID_MASK_WORDS; word++) {
for (word = 0; word < xp_nasid_mask_words; word++) {
if (xpc_exiting) {
break;
}
nasid_mask = xpc_IPI_receive(&act_amos[word]);
if (nasid_mask == 0) {
......@@ -668,7 +830,7 @@ xpc_identify_act_IRQ_sender(void)
* remote nasid in our reserved pages machine mask.
* This is used in the event of module reload.
*/
rp->mach_nasids[word] |= nasid_mask;
xpc_mach_nasids[word] |= nasid_mask;
/* locate the nasid(s) which sent interrupts */
......@@ -687,6 +849,55 @@ xpc_identify_act_IRQ_sender(void)
}
/*
* See if the other side has responded to a partition disengage request
* from us.
*/
int
xpc_partition_disengaged(struct xpc_partition *part)
{
partid_t partid = XPC_PARTID(part);
int disengaged;
disengaged = (xpc_partition_engaged(1UL << partid) == 0);
if (part->disengage_request_timeout) {
if (!disengaged) {
if (jiffies < part->disengage_request_timeout) {
/* timelimit hasn't been reached yet */
return 0;
}
/*
* Other side hasn't responded to our disengage
* request in a timely fashion, so assume it's dead.
*/
xpc_clear_partition_engaged(1UL << partid);
disengaged = 1;
}
part->disengage_request_timeout = 0;
/* cancel the timer function, provided it's not us */
if (!in_interrupt()) {
del_singleshot_timer_sync(&part->
disengage_request_timer);
}
DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
part->act_state != XPC_P_INACTIVE);
if (part->act_state != XPC_P_INACTIVE) {
xpc_wakeup_channel_mgr(part);
}
if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
xpc_cancel_partition_disengage_request(part);
}
}
return disengaged;
}
/*
* Mark specified partition as active.
*/
......@@ -721,7 +932,6 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
enum xpc_retval reason)
{
unsigned long irq_flags;
partid_t partid = XPC_PARTID(part);
spin_lock_irqsave(&part->act_lock, irq_flags);
......@@ -749,17 +959,27 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
spin_unlock_irqrestore(&part->act_lock, irq_flags);
XPC_DISALLOW_HB(partid, xpc_vars);
if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
xpc_request_partition_disengage(part);
xpc_IPI_send_disengage(part);
dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid,
reason);
/* set a timelimit on the disengage request */
part->disengage_request_timeout = jiffies +
(xpc_disengage_request_timelimit * HZ);
part->disengage_request_timer.expires =
part->disengage_request_timeout;
add_timer(&part->disengage_request_timer);
}
dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
XPC_PARTID(part), reason);
xpc_partition_down(part, reason);
xpc_partition_going_down(part, reason);
}
/*
* Mark specified partition as active.
* Mark specified partition as inactive.
*/
void
xpc_mark_partition_inactive(struct xpc_partition *part)
......@@ -792,9 +1012,10 @@ xpc_discovery(void)
void *remote_rp_base;
struct xpc_rsvd_page *remote_rp;
struct xpc_vars *remote_vars;
u64 remote_rsvd_page_pa;
u64 remote_rp_pa;
u64 remote_vars_pa;
int region;
int region_size;
int max_regions;
int nasid;
struct xpc_rsvd_page *rp;
......@@ -804,7 +1025,8 @@ xpc_discovery(void)
enum xpc_retval ret;
remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RSVD_PAGE_ALIGNED_SIZE,
remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
xp_nasid_mask_bytes,
GFP_KERNEL, &remote_rp_base);
if (remote_rp == NULL) {
return;
......@@ -812,13 +1034,13 @@ xpc_discovery(void)
remote_vars = (struct xpc_vars *) remote_rp;
discovered_nasids = kmalloc(sizeof(u64) * XP_NASID_MASK_WORDS,
discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words,
GFP_KERNEL);
if (discovered_nasids == NULL) {
kfree(remote_rp_base);
return;
}
memset(discovered_nasids, 0, sizeof(u64) * XP_NASID_MASK_WORDS);
memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words);
rp = (struct xpc_rsvd_page *) xpc_rsvd_page;
......@@ -827,11 +1049,19 @@ xpc_discovery(void)
* nodes that can comprise an access protection grouping. The access
* protection is in regards to memory, IOI and IPI.
*/
//>>> move the next two #defines into either include/asm-ia64/sn/arch.h or
//>>> include/asm-ia64/sn/addrs.h
#define SH1_MAX_REGIONS 64
#define SH2_MAX_REGIONS 256
max_regions = is_shub2() ? SH2_MAX_REGIONS : SH1_MAX_REGIONS;
max_regions = 64;
region_size = sn_region_size;
switch (region_size) {
case 128:
max_regions *= 2;
case 64:
max_regions *= 2;
case 32:
max_regions *= 2;
region_size = 16;
DBUG_ON(!is_shub2());
}
for (region = 0; region < max_regions; region++) {
......@@ -841,8 +1071,8 @@ xpc_discovery(void)
dev_dbg(xpc_part, "searching region %d\n", region);
for (nasid = (region * sn_region_size * 2);
nasid < ((region + 1) * sn_region_size * 2);
for (nasid = (region * region_size * 2);
nasid < ((region + 1) * region_size * 2);
nasid += 2) {
if ((volatile int) xpc_exiting) {
......@@ -852,14 +1082,14 @@ xpc_discovery(void)
dev_dbg(xpc_part, "checking nasid %d\n", nasid);
if (XPC_NASID_IN_ARRAY(nasid, rp->part_nasids)) {
if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
dev_dbg(xpc_part, "PROM indicates Nasid %d is "
"part of the local partition; skipping "
"region\n", nasid);
break;
}
if (!(XPC_NASID_IN_ARRAY(nasid, rp->mach_nasids))) {
if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
dev_dbg(xpc_part, "PROM indicates Nasid %d was "
"not on Numa-Link network at reset\n",
nasid);
......@@ -877,7 +1107,7 @@ xpc_discovery(void)
/* pull over the reserved page structure */
ret = xpc_get_remote_rp(nasid, discovered_nasids,
remote_rp, &remote_rsvd_page_pa);
remote_rp, &remote_rp_pa);
if (ret != xpcSuccess) {
dev_dbg(xpc_part, "unable to get reserved page "
"from nasid %d, reason=%d\n", nasid,
......@@ -948,6 +1178,13 @@ xpc_discovery(void)
remote_vars->act_nasid,
remote_vars->act_phys_cpuid);
if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
version)) {
part->remote_amos_page_pa =
remote_vars->amos_page_pa;
xpc_mark_partition_disengaged(part);
xpc_cancel_partition_disengage_request(part);
}
xpc_IPI_send_activate(remote_vars);
}
}
......@@ -974,12 +1211,12 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
return xpcPartitionDown;
}
part_nasid_pa = part->remote_rp_pa +
(u64) &((struct xpc_rsvd_page *) 0)->part_nasids;
memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
L1_CACHE_ALIGN(XP_NASID_MASK_BYTES),
(BTE_NOTIFY | BTE_WACQUIRE), NULL);
xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
return xpc_map_bte_errors(bte_res);
}
......
arch/ia64/sn/pci/pci_dma.c
View file @ 8a212ab6
......@@ -326,6 +326,29 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
{
unsigned long addr;
int ret;
struct ia64_sal_retval isrv;
/*
* First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
* around hw issues at the pci bus level. SGI proms older than
* 4.10 don't implment this.
*/
SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
pci_domain_nr(bus), bus->number,
0, /* io */
0, /* read */
port, size, __pa(val));
if (isrv.status == 0)
return size;
/*
* If the above failed, retry using the SAL_PROBE call which should
* be present in all proms (but which cannot work round PCI chipset
* bugs). This code is retained for compatability with old
* pre-4.10 proms, and should be removed at some point in the future.
*/
if (!SN_PCIBUS_BUSSOFT(bus))
return -ENODEV;
......@@ -349,6 +372,29 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
int ret = size;
unsigned long paddr;
unsigned long *addr;
struct ia64_sal_retval isrv;
/*
* First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
* around hw issues at the pci bus level. SGI proms older than
* 4.10 don't implment this.
*/
SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
pci_domain_nr(bus), bus->number,
0, /* io */
1, /* write */
port, size, __pa(&val));
if (isrv.status == 0)
return size;
/*
* If the above failed, retry using the SAL_PROBE call which should
* be present in all proms (but which cannot work round PCI chipset
* bugs). This code is retained for compatability with old
* pre-4.10 proms, and should be removed at some point in the future.
*/
if (!SN_PCIBUS_BUSSOFT(bus)) {
ret = -ENODEV;
......
arch/ia64/sn/pci/pcibr/pcibr_reg.c
View file @ 8a212ab6
......@@ -8,6 +8,7 @@
#include <linux/interrupt.h>
#include <linux/types.h>
#include <asm/sn/io.h>
#include <asm/sn/pcibr_provider.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
......@@ -29,10 +30,10 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ptr->tio.cp_control &= ~bits;
__sn_clrq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
ptr->pic.p_wid_control &= ~bits;
__sn_clrq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
......@@ -49,10 +50,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ptr->tio.cp_control |= bits;
__sn_setq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
ptr->pic.p_wid_control |= bits;
__sn_setq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
......@@ -73,10 +74,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ret = ptr->tio.cp_tflush;
ret = __sn_readq_relaxed(&ptr->tio.cp_tflush);
break;
case PCIBR_BRIDGETYPE_PIC:
ret = ptr->pic.p_wid_tflush;
ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush);
break;
default:
panic
......@@ -103,10 +104,10 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ret = ptr->tio.cp_int_status;
ret = __sn_readq_relaxed(&ptr->tio.cp_int_status);
break;
case PCIBR_BRIDGETYPE_PIC:
ret = ptr->pic.p_int_status;
ret = __sn_readq_relaxed(&ptr->pic.p_int_status);
break;
default:
panic
......@@ -127,10 +128,10 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ptr->tio.cp_int_enable &= ~bits;
__sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
ptr->pic.p_int_enable &= ~bits;
__sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits);
break;
default:
panic
......@@ -147,10 +148,10 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ptr->tio.cp_int_enable |= bits;
__sn_setq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
ptr->pic.p_int_enable |= bits;
__sn_setq_relaxed(&ptr->pic.p_int_enable, bits);
break;
default:
panic
......@@ -171,14 +172,16 @@ void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n,
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR;
ptr->tio.cp_int_addr[int_n] |=
(addr & TIOCP_HOST_INTR_ADDR);
__sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n],
TIOCP_HOST_INTR_ADDR);
__sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n],
(addr & TIOCP_HOST_INTR_ADDR));
break;
case PCIBR_BRIDGETYPE_PIC:
ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR;
ptr->pic.p_int_addr[int_n] |=
(addr & PIC_HOST_INTR_ADDR);
__sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n],
PIC_HOST_INTR_ADDR);
__sn_setq_relaxed(&ptr->pic.p_int_addr[int_n],
(addr & PIC_HOST_INTR_ADDR));
break;
default:
panic
......@@ -198,10 +201,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ptr->tio.cp_force_pin[int_n] = 1;
writeq(1, &ptr->tio.cp_force_pin[int_n]);
break;
case PCIBR_BRIDGETYPE_PIC:
ptr->pic.p_force_pin[int_n] = 1;
writeq(1, &ptr->pic.p_force_pin[int_n]);
break;
default:
panic
......@@ -222,10 +225,12 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ret = ptr->tio.cp_wr_req_buf[device];
ret =
__sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]);
break;
case PCIBR_BRIDGETYPE_PIC:
ret = ptr->pic.p_wr_req_buf[device];
ret =
__sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]);
break;
default:
panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr);
......@@ -244,10 +249,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val;
writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]);
break;
case PCIBR_BRIDGETYPE_PIC:
ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val;
writeq(val, &ptr->pic.p_int_ate_ram[ate_index]);
break;
default:
panic
......@@ -265,12 +270,10 @@ uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
ret =
(uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]);
ret = &ptr->tio.cp_int_ate_ram[ate_index];
break;
case PCIBR_BRIDGETYPE_PIC:
ret =
(uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]);
ret = &ptr->pic.p_int_ate_ram[ate_index];
break;
default:
panic
......
arch/ia64/sn/pci/tioca_provider.c
View file @ 8a212ab6
......@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
......@@ -37,7 +38,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
uint64_t offset;
struct page *tmp;
struct tioca_common *tioca_common;
volatile struct tioca *ca_base;
struct tioca *ca_base;
tioca_common = tioca_kern->ca_common;
ca_base = (struct tioca *)tioca_common->ca_common.bs_base;
......@@ -174,27 +175,29 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
* DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029
*/
ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */
ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT);
__sn_setq_relaxed(&ca_base->ca_control1,
CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */
__sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
__sn_setq_relaxed(&ca_base->ca_control2,
(0x2ull << CA_GART_MEM_PARAM_SHFT));
tioca_kern->ca_gart_iscoherent = 1;
ca_base->ca_control2 &=
~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB);
__sn_clrq_relaxed(&ca_base->ca_control2,
(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB));
/*
* Unmask GART fetch error interrupts. Clear residual errors first.
*/
ca_base->ca_int_status_alias = CA_GART_FETCH_ERR;
ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR;
ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR;
writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias);
writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias);
__sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR);
/*
* Program the aperature and gart registers in TIOCA
*/
ca_base->ca_gart_aperature = ap_reg;
ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1;
writeq(ap_reg, &ca_base->ca_gart_aperature);
writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table);
return 0;
}
......@@ -211,7 +214,6 @@ void
tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
{
int cap_ptr;
uint64_t ca_control1;
uint32_t reg;
struct tioca *tioca_base;
struct pci_dev *pdev;
......@@ -256,9 +258,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
*/
tioca_base = (struct tioca *)common->ca_common.bs_base;
ca_control1 = tioca_base->ca_control1;
ca_control1 |= CA_AGP_FW_ENABLE;
tioca_base->ca_control1 = ca_control1;
__sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE);
}
EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */
......@@ -345,7 +345,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
return 0;
}
agp_dma_extn = ca_base->ca_agp_dma_addr_extn;
agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
printk(KERN_ERR "%s: coretalk upper node (%u) "
"mismatch with ca_agp_dma_addr_extn (%lu)\n",
......
arch/ia64/sn/pci/tioce_provider.c
View file @ 8a212ab6
......@@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce_provider.h>
......@@ -227,7 +228,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
ate = ATE_MAKE(addr, pagesize);
ate_shadow[i + j] = ate;
ate_reg[i + j] = ate;
writeq(ate, &ate_reg[i + j]);
addr += pagesize;
}
......@@ -268,10 +269,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
volatile uint64_t tmp;
uint64_t tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
ce_mmr->ce_ure_dir_map[port] = ct_upper;
writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
tmp = ce_mmr->ce_ure_dir_map[port];
dma_ok = 1;
} else
......@@ -343,7 +344,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
if (TIOCE_D32_ADDR(bus_addr)) {
if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
ce_kern->ce_port[port].dirmap_shadow = 0;
ce_mmr->ce_ure_dir_map[port] = 0;
writeq(0, &ce_mmr->ce_ure_dir_map[port]);
}
} else {
struct tioce_dmamap *map;
......@@ -582,18 +583,18 @@ tioce_kern_init(struct tioce_common *tioce_common)
*/
tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
__sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
__sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
tioce_kern->ce_ate3240_pagesize = KB(256);
for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
tioce_kern->ce_ate40_shadow[i] = 0;
tioce_mmr->ce_ure_ate40[i] = 0;
writeq(0, &tioce_mmr->ce_ure_ate40[i]);
}
for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
tioce_kern->ce_ate3240_shadow[i] = 0;
tioce_mmr->ce_ure_ate3240[i] = 0;
writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
}
return tioce_kern;
......@@ -665,7 +666,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
default:
return;
}
ce_mmr->ce_adm_force_int = force_int_val;
writeq(force_int_val, &ce_mmr->ce_adm_force_int);
}
/**
......@@ -686,6 +687,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
struct tioce_common *ce_common;
struct tioce *ce_mmr;
int bit;
uint64_t vector;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (!pcidev_info)
......@@ -696,11 +698,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
bit = sn_irq_info->irq_int_bit;
ce_mmr->ce_adm_int_mask |= (1UL << bit);
ce_mmr->ce_adm_int_dest[bit] =
((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) |
sn_irq_info->irq_xtalkaddr;
ce_mmr->ce_adm_int_mask &= ~(1UL << bit);
__sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
vector |= sn_irq_info->irq_xtalkaddr;
writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
__sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
tioce_force_interrupt(sn_irq_info);
}
......
drivers/char/agp/sgi-agp.c
View file @ 8a212ab6
......@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/agp_backend.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
......
drivers/char/mmtimer.c
View file @ 8a212ab6
......@@ -441,7 +441,7 @@ static irqreturn_t
mmtimer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
int i;
mmtimer_t *base = timers + cpuid_to_cnodeid(smp_processor_id()) *
mmtimer_t *base = timers + cpu_to_node(smp_processor_id()) *
NUM_COMPARATORS;
unsigned long expires = 0;
int result = IRQ_NONE;
......@@ -608,7 +608,7 @@ static int sgi_timer_set(struct k_itimer *timr, int flags,
*/
preempt_disable();
nodeid = cpuid_to_cnodeid(smp_processor_id());
nodeid = cpu_to_node(smp_processor_id());
base = timers + nodeid * NUM_COMPARATORS;
retry:
/* Don't use an allocated timer, or a deleted one that's pending */
......
drivers/char/snsc.c
View file @ 8a212ab6
......@@ -377,7 +377,7 @@ scdrv_init(void)
dev_t first_dev, dev;
nasid_t event_nasid = ia64_sn_get_console_nasid();
if (alloc_chrdev_region(&first_dev, 0, numionodes,
if (alloc_chrdev_region(&first_dev, 0, num_cnodes,
SYSCTL_BASENAME) < 0) {
printk("%s: failed to register SN system controller device\n",
__FUNCTION__);
......@@ -385,7 +385,7 @@ scdrv_init(void)
}
snsc_class = class_create(THIS_MODULE, SYSCTL_BASENAME);
for (cnode = 0; cnode < numionodes; cnode++) {
for (cnode = 0; cnode < num_cnodes; cnode++) {
geoid = cnodeid_get_geoid(cnode);
devnamep = devname;
format_module_id(devnamep, geo_module(geoid),
......
include/asm-ia64/machvec.h
View file @ 8a212ab6
......@@ -26,7 +26,7 @@ typedef void ia64_mv_cpu_init_t (void);
typedef void ia64_mv_irq_init_t (void);
typedef void ia64_mv_send_ipi_t (int, int, int, int);
typedef void ia64_mv_timer_interrupt_t (int, void *, struct pt_regs *);
typedef void ia64_mv_global_tlb_purge_t (unsigned long, unsigned long, unsigned long);
typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long);
typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
typedef unsigned int ia64_mv_local_vector_to_irq (u8);
typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
......
include/asm-ia64/machvec_hpzx1.h
View file @ 8a212ab6
#ifndef _ASM_IA64_MACHVEC_HPZX1_h
#define _ASM_IA64_MACHVEC_HPZX1_h
extern ia64_mv_setup_t dig_setup;
extern ia64_mv_setup_t sba_setup;
extern ia64_mv_setup_t dig_setup;
extern ia64_mv_dma_alloc_coherent sba_alloc_coherent;
extern ia64_mv_dma_free_coherent sba_free_coherent;
extern ia64_mv_dma_map_single sba_map_single;
......@@ -19,15 +18,15 @@ extern ia64_mv_dma_mapping_error sba_dma_mapping_error;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
#define platform_name "hpzx1"
#define platform_setup sba_setup
#define platform_dma_init machvec_noop
#define platform_dma_alloc_coherent sba_alloc_coherent
#define platform_dma_free_coherent sba_free_coherent
#define platform_dma_map_single sba_map_single
#define platform_dma_unmap_single sba_unmap_single
#define platform_dma_map_sg sba_map_sg
#define platform_dma_unmap_sg sba_unmap_sg
#define platform_name "hpzx1"
#define platform_setup dig_setup
#define platform_dma_init machvec_noop
#define platform_dma_alloc_coherent sba_alloc_coherent
#define platform_dma_free_coherent sba_free_coherent
#define platform_dma_map_single sba_map_single
#define platform_dma_unmap_single sba_unmap_single
#define platform_dma_map_sg sba_map_sg
#define platform_dma_unmap_sg sba_unmap_sg
#define platform_dma_sync_single_for_cpu machvec_dma_sync_single
#define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg
#define platform_dma_sync_single_for_device machvec_dma_sync_single
......
include/asm-ia64/machvec_hpzx1_swiotlb.h
View file @ 8a212ab6
......@@ -2,7 +2,6 @@
#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
extern ia64_mv_setup_t dig_setup;
extern ia64_mv_dma_init hwsw_init;
extern ia64_mv_dma_alloc_coherent hwsw_alloc_coherent;
extern ia64_mv_dma_free_coherent hwsw_free_coherent;
extern ia64_mv_dma_map_single hwsw_map_single;
......@@ -26,7 +25,7 @@ extern ia64_mv_dma_sync_sg_for_device hwsw_sync_sg_for_device;
#define platform_name "hpzx1_swiotlb"
#define platform_setup dig_setup
#define platform_dma_init hwsw_init
#define platform_dma_init machvec_noop
#define platform_dma_alloc_coherent hwsw_alloc_coherent
#define platform_dma_free_coherent hwsw_free_coherent
#define platform_dma_map_single hwsw_map_single
......
include/asm-ia64/meminit.h
View file @ 8a212ab6
......@@ -16,10 +16,11 @@
* - initrd (optional)
* - command line string
* - kernel code & data
* - Kernel memory map built from EFI memory map
*
* More could be added if necessary
*/
#define IA64_MAX_RSVD_REGIONS 5
#define IA64_MAX_RSVD_REGIONS 6
struct rsvd_region {
unsigned long start; /* virtual address of beginning of element */
......@@ -33,6 +34,7 @@ extern void find_memory (void);
extern void reserve_memory (void);
extern void find_initrd (void);
extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
extern void efi_memmap_init(unsigned long *, unsigned long *);
/*
* For rounding an address to the next IA64_GRANULE_SIZE or order
......@@ -41,7 +43,7 @@ extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg
#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
#ifdef CONFIG_DISCONTIGMEM
#ifdef CONFIG_NUMA
extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
#else
# define call_pernode_memory(start, len, func) (*func)(start, len, 0)
......
include/asm-ia64/mmzone.h
View file @ 8a212ab6
......@@ -15,7 +15,7 @@
#include <asm/page.h>
#include <asm/meminit.h>
#ifdef CONFIG_DISCONTIGMEM
#ifdef CONFIG_NUMA
static inline int pfn_to_nid(unsigned long pfn)
{
......@@ -31,6 +31,10 @@ static inline int pfn_to_nid(unsigned long pfn)
#endif
}
#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
extern int early_pfn_to_nid(unsigned long pfn);
#endif
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
......@@ -39,8 +43,8 @@ static inline int pfn_to_nid(unsigned long pfn)
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
#endif
#else /* CONFIG_DISCONTIGMEM */
#else /* CONFIG_NUMA */
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
#endif /* CONFIG_DISCONTIGMEM */
#endif /* CONFIG_NUMA */
#endif /* _ASM_IA64_MMZONE_H */
include/asm-ia64/nodedata.h
View file @ 8a212ab6
......@@ -17,7 +17,7 @@
#include <asm/percpu.h>
#include <asm/mmzone.h>
#ifdef CONFIG_DISCONTIGMEM
#ifdef CONFIG_NUMA
/*
* Node Data. One of these structures is located on each node of a NUMA system.
......@@ -47,6 +47,6 @@ struct ia64_node_data {
*/
#define NODE_DATA(nid) (local_node_data->pg_data_ptrs[nid])
#endif /* CONFIG_DISCONTIGMEM */
#endif /* CONFIG_NUMA */
#endif /* _ASM_IA64_NODEDATA_H */
include/asm-ia64/page.h
View file @ 8a212ab6
......@@ -102,15 +102,15 @@ do { \
#ifdef CONFIG_VIRTUAL_MEM_MAP
extern int ia64_pfn_valid (unsigned long pfn);
#else
#elif defined(CONFIG_FLATMEM)
# define ia64_pfn_valid(pfn) 1
#endif
#ifndef CONFIG_DISCONTIGMEM
#ifdef CONFIG_FLATMEM
# define pfn_valid(pfn) (((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
# define page_to_pfn(page) ((unsigned long) (page - mem_map))
# define pfn_to_page(pfn) (mem_map + (pfn))
#else
#elif defined(CONFIG_DISCONTIGMEM)
extern struct page *vmem_map;
extern unsigned long max_low_pfn;
# define pfn_valid(pfn) (((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
......
include/asm-ia64/sn/arch.h
View file @ 8a212ab6
......@@ -17,6 +17,32 @@
#include <asm/sn/types.h>
#include <asm/sn/sn_cpuid.h>
/*
* This is the maximum number of NUMALINK nodes that can be part of a single
* SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
* remote partitions are NOT included in this number.
* The number of compact nodes cannot exceed size of a coherency domain.
* The purpose of this define is to specify a node count that includes
* all C/M/TIO nodes in an SSI system.
*
* SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
*
* Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
* to ACPI3.0, this limit will be removed. The notion of "compact nodes"
* should be deleted and TIOs should be included in MAX_NUMNODES.
*/
#define MAX_COMPACT_NODES 512
/*
* Maximum number of nodes in all partitions and in all coherency domains.
* This is the total number of nodes accessible in the numalink fabric. It
* includes all C & M bricks, plus all TIOs.
*
* This value is also the value of the maximum number of NASIDs in the numalink
* fabric.
*/
#define MAX_NUMALINK_NODES 16384
/*
* The following defines attributes of the HUB chip. These attributes are
* frequently referenced. They are kept in the per-cpu data areas of each cpu.
......@@ -40,15 +66,6 @@ DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found)
/*
* This is the maximum number of nodes that can be part of a kernel.
* Effectively, it's the maximum number of compact node ids (cnodeid_t).
* This is not necessarily the same as MAX_NASIDS.
*/
#define MAX_COMPACT_NODES 2048
#define CPUS_PER_NODE 4
/*
* Compact node ID to nasid mappings kept in the per-cpu data areas of each
* cpu.
......@@ -57,7 +74,6 @@ DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]);
#define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0]))
extern u8 sn_partition_id;
extern u8 sn_system_size;
extern u8 sn_sharing_domain_size;
......
include/asm-ia64/sn/io.h
View file @ 8a212ab6
......@@ -14,7 +14,7 @@
extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
extern void __sn_mmiowb(void); /* Forward definition */
extern int numionodes;
extern int num_cnodes;
#define __sn_mf_a() ia64_mfa()
......@@ -35,6 +35,15 @@ extern void sn_dma_flush(unsigned long);
#define __sn_readl_relaxed ___sn_readl_relaxed
#define __sn_readq_relaxed ___sn_readq_relaxed
/*
* Convenience macros for setting/clearing bits using the above accessors
*/
#define __sn_setq_relaxed(addr, val) \
writeq((__sn_readq_relaxed(addr) | (val)), (addr))
#define __sn_clrq_relaxed(addr, val) \
writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
/*
* The following routines are SN Platform specific, called when
* a reference is made to inX/outX set macros. SN Platform
......
include/asm-ia64/sn/klconfig.h
View file @ 8a212ab6
......@@ -208,19 +208,6 @@ typedef struct lboard_s {
klconf_off_t brd_next_same; /* Next BOARD with same nasid */
} lboard_t;
#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off))
#define KLCF_NEXT(_brd) \
((_brd)->brd_next_same ? \
(NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL)
#define KLCF_NEXT_ANY(_brd) \
((_brd)->brd_next_any ? \
(NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL)
#define KLCF_COMP(_brd, _ndx) \
((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \
(NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])))
/*
* Generic info structure. This stores common info about a
* component.
......@@ -249,24 +236,11 @@ typedef struct klinfo_s { /* Generic info */
} klinfo_t ;
static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type)
static inline lboard_t *find_lboard_next(lboard_t * brd)
{
/* Search all boards stored on this node. */
while (start) {
if (start->brd_type == brd_type)
return start;
start = KLCF_NEXT_ANY(start);
}
/* Didn't find it. */
return (lboard_t *) NULL;
if (brd && brd->brd_next_any)
return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
return NULL;
}
/* external declarations of Linux kernel functions. */
extern lboard_t *root_lboard[];
extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
#endif /* _ASM_IA64_SN_KLCONFIG_H */
include/asm-ia64/sn/l1.h
View file @ 8a212ab6
......@@ -35,4 +35,16 @@
#define L1_BRICKTYPE_ATHENA 0x2b /* + */
#define L1_BRICKTYPE_DAYTONA 0x7a /* z */
/* board type response codes */
#define L1_BOARDTYPE_IP69 0x0100 /* CA */
#define L1_BOARDTYPE_IP63 0x0200 /* CB */
#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */
#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */
#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */
#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */
#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */
#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */
#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */
#endif /* _ASM_IA64_SN_L1_H */
include/asm-ia64/sn/nodepda.h
View file @ 8a212ab6
......@@ -55,7 +55,6 @@ struct nodepda_s {
*/
struct phys_cpuid phys_cpuid[NR_CPUS];
spinlock_t ptc_lock ____cacheline_aligned_in_smp;
spinlock_t bist_lock;
};
typedef struct nodepda_s nodepda_t;
......
include/asm-ia64/sn/sn_cpuid.h
View file @ 8a212ab6
......@@ -105,7 +105,6 @@ extern short physical_node_map[]; /* indexed by nasid to get cnode */
#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid)
#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode)
#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice)
#define cpuid_to_cnodeid(cpuid) (physical_node_map[cpuid_to_nasid(cpuid)])
/*
......@@ -113,8 +112,6 @@ extern short physical_node_map[]; /* indexed by nasid to get cnode */
* of potentially large tables.
*/
extern int nasid_slice_to_cpuid(int, int);
#define nasid_slice_to_cpu_physical_id(nasid, slice) \
cpu_physical_id(nasid_slice_to_cpuid(nasid, slice))
/*
* cnodeid_to_nasid - convert a cnodeid to a NASID
......
include/asm-ia64/sn/sn_sal.h
View file @ 8a212ab6
......@@ -47,6 +47,7 @@
#define SN_SAL_CONSOLE_PUTB 0x02000028
#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a
#define SN_SAL_CONSOLE_READC 0x0200002b
#define SN_SAL_SYSCTL_OP 0x02000030
#define SN_SAL_SYSCTL_MODID_GET 0x02000031
#define SN_SAL_SYSCTL_GET 0x02000032
#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033
......@@ -67,7 +68,7 @@
#define SN_SAL_IOIF_INTERRUPT 0x0200004a
#define SN_SAL_HWPERF_OP 0x02000050 // lock
#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051
#define SN_SAL_IOIF_PCI_SAFE 0x02000052
#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053
#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054
#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055
......@@ -100,6 +101,13 @@
#define SAL_INTR_ALLOC 1
#define SAL_INTR_FREE 2
/*
* operations available on the generic SN_SAL_SYSCTL_OP
* runtime service
*/
#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */
#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */
/*
* IRouter (i.e. generalized system controller) operations
*/
......@@ -198,26 +206,16 @@ ia64_sn_get_master_baseio_nasid(void)
return ret_stuff.v0;
}
static inline char *
static inline void *
ia64_sn_get_klconfig_addr(nasid_t nasid)
{
struct ia64_sal_retval ret_stuff;
int cnodeid;
cnodeid = nasid_to_cnodeid(nasid);
ret_stuff.status = 0;
ret_stuff.v0 = 0;
ret_stuff.v1 = 0;
ret_stuff.v2 = 0;
SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
/*
* We should panic if a valid cnode nasid does not produce
* a klconfig address.
*/
if (ret_stuff.status != 0) {
panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status);
}
return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
}
......@@ -694,12 +692,10 @@ sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
unsigned long irq_flags;
cnodeid = nasid_to_cnodeid(get_node_number(paddr));
// spin_lock(&NODEPDA(cnodeid)->bist_lock);
local_irq_save(irq_flags);
ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
(u64)nasid_array, perms, 0, 0, 0);
local_irq_restore(irq_flags);
// spin_unlock(&NODEPDA(cnodeid)->bist_lock);
return ret_stuff.status;
}
#define SN_MEMPROT_ACCESS_CLASS_0 0x14a080
......@@ -873,6 +869,41 @@ ia64_sn_sysctl_event_init(nasid_t nasid)
return (int) rv.v0;
}
/*
* Ask the system controller on the specified nasid to reset
* the CX corelet clock. Only valid on TIO nodes.
*/
static inline int
ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
{
struct ia64_sal_retval rv;
SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
nasid, 0, 0, 0, 0, 0);
if (rv.status != 0)
return (int)rv.status;
if (rv.v0 != 0)
return (int)rv.v0;
return 0;
}
/*
* Get the associated ioboard type for a given nasid.
*/
static inline int
ia64_sn_sysctl_ioboard_get(nasid_t nasid)
{
struct ia64_sal_retval rv;
SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
nasid, 0, 0, 0, 0, 0);
if (rv.v0 != 0)
return (int)rv.v0;
if (rv.v1 != 0)
return (int)rv.v1;
return 0;
}
/**
* ia64_sn_get_fit_compt - read a FIT entry from the PROM header
* @nasid: NASID of node to read
......
include/asm-ia64/sn/tioca_provider.h
View file @ 8a212ab6
......@@ -182,11 +182,11 @@ tioca_tlbflush(struct tioca_kernel *tioca_kernel)
* touch every CL aligned GART entry.
*/
ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
ca_base->ca_control2 |= CA_GART_FLUSH_TLB;
ca_base->ca_control2 |=
(0x2ull << CA_GART_MEM_PARAM_SHFT);
tmp = ca_base->ca_control2;
__sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
__sn_setq_relaxed(&ca_base->ca_control2,
(0x2ull << CA_GART_MEM_PARAM_SHFT));
tmp = __sn_readq_relaxed(&ca_base->ca_control2);
}
return;
......@@ -196,8 +196,8 @@ tioca_tlbflush(struct tioca_kernel *tioca_kernel)
* Gart in uncached mode ... need an explicit flush.
*/
ca_base->ca_control2 |= CA_GART_FLUSH_TLB;
tmp = ca_base->ca_control2;
__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
tmp = __sn_readq_relaxed(&ca_base->ca_control2);
}
extern uint32_t tioca_gart_found;
......
include/asm-ia64/sn/tiocx.h
View file @ 8a212ab6
......@@ -19,6 +19,7 @@ struct cx_id_s {
struct cx_dev {
struct cx_id_s cx_id;
int bt; /* board/blade type */
void *soft; /* driver specific */
struct hubdev_info *hubdev;
struct device dev;
......@@ -59,7 +60,7 @@ struct cx_drv {
extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
extern void tiocx_irq_free(struct sn_irq_info *);
extern int cx_device_unregister(struct cx_dev *);
extern int cx_device_register(nasid_t, int, int, struct hubdev_info *);
extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
extern int cx_driver_unregister(struct cx_drv *);
extern int cx_driver_register(struct cx_drv *);
extern uint64_t tiocx_dma_addr(uint64_t addr);
......
include/asm-ia64/sn/xp.h
View file @ 8a212ab6
......@@ -49,7 +49,7 @@
* C-brick nasids, thus the need for bitmaps which don't account for
* odd-numbered (non C-brick) nasids.
*/
#define XP_MAX_PHYSNODE_ID (MAX_PHYSNODE_ID / 2)
#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2)
#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8)
#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64)
......@@ -217,7 +217,17 @@ enum xpc_retval {
xpcInvalidPartid, /* 42: invalid partition ID */
xpcLocalPartid, /* 43: local partition ID */
xpcUnknownReason /* 44: unknown reason -- must be last in list */
xpcOtherGoingDown, /* 44: other side going down, reason unknown */
xpcSystemGoingDown, /* 45: system is going down, reason unknown */
xpcSystemHalt, /* 46: system is being halted */
xpcSystemReboot, /* 47: system is being rebooted */
xpcSystemPoweroff, /* 48: system is being powered off */
xpcDisconnecting, /* 49: channel disconnecting (closing) */
xpcOpenCloseError, /* 50: channel open/close protocol error */
xpcUnknownReason /* 51: unknown reason -- must be last in list */
};
......@@ -342,7 +352,7 @@ typedef void (*xpc_notify_func)(enum xpc_retval reason, partid_t partid,
*
* The 'func' field points to the function to call when aynchronous
* notification is required for such events as: a connection established/lost,
* or an incomming message received, or an error condition encountered. A
* or an incoming message received, or an error condition encountered. A
* non-NULL 'func' field indicates that there is an active registration for
* the channel.
*/
......
include/asm-ia64/sparsemem.h 0 → 100644
View file @ 8a212ab6
#ifndef _ASM_IA64_SPARSEMEM_H
#define _ASM_IA64_SPARSEMEM_H
#ifdef CONFIG_SPARSEMEM
/*
* SECTION_SIZE_BITS 2^N: how big each section will be
* MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
*/
#define SECTION_SIZE_BITS (30)
#define MAX_PHYSMEM_BITS (50)
#ifdef CONFIG_FORCE_MAX_ZONEORDER
#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
#undef SECTION_SIZE_BITS
#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
#endif
#endif
#endif /* CONFIG_SPARSEMEM */
#endif /* _ASM_IA64_SPARSEMEM_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7