Commit 8ad68bbf authored by Catalin Marinas's avatar Catalin Marinas Committed by Russell King

[ARM] Add support for ARM RealView board

Support for RealView EB.
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent e2f2e58e
...@@ -194,6 +194,13 @@ config ARCH_VERSATILE ...@@ -194,6 +194,13 @@ config ARCH_VERSATILE
help help
This enables support for ARM Ltd Versatile board. This enables support for ARM Ltd Versatile board.
config ARCH_REALVIEW
bool "RealView"
select ARM_AMBA
select ICST307
help
This enables support for ARM Ltd RealView boards.
config ARCH_IMX config ARCH_IMX
bool "IMX" bool "IMX"
...@@ -244,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig" ...@@ -244,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-aaec2000/Kconfig" source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-realview/Kconfig"
# Definitions to make life easier # Definitions to make life easier
config ARCH_ACORN config ARCH_ACORN
bool bool
......
...@@ -99,6 +99,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 ...@@ -99,6 +99,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
ifeq ($(CONFIG_ARCH_EBSA110),y) ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line. # This is what happens if you forget the IOCS16 line.
......
menu "RealView platform type"
depends on ARCH_REALVIEW
config MACH_REALVIEW_EB
bool "Support RealView/EB platform"
default n
select ARM_GIC
help
Include support for the ARM(R) RealView Emulation Baseboard platform.
endmenu
#
# Makefile for the linux kernel.
#
obj-y := core.o clock.o
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
/*
* linux/arch/arm/mach-realview/clock.c
*
* Copyright (C) 2004 ARM Limited.
* Written by Deep Blue Solutions Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/icst307.h>
#include "clock.h"
static LIST_HEAD(clocks);
static DECLARE_MUTEX(clocks_sem);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
down(&clocks_sem);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
up(&clocks_sem);
return clk;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_disable);
int clk_use(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_use);
void clk_unuse(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_unuse);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
return rate;
}
EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EIO;
if (clk->setvco) {
struct icst307_vco vco;
vco = icst307_khz_to_vco(clk->params, rate / 1000);
clk->rate = icst307_khz(clk->params, vco) * 1000;
printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
clk->name, vco.s, vco.r, vco.v);
clk->setvco(clk, vco);
ret = 0;
}
return ret;
}
EXPORT_SYMBOL(clk_set_rate);
/*
* These are fixed clocks.
*/
static struct clk kmi_clk = {
.name = "KMIREFCLK",
.rate = 24000000,
};
static struct clk uart_clk = {
.name = "UARTCLK",
.rate = 24000000,
};
static struct clk mmci_clk = {
.name = "MCLK",
.rate = 33000000,
};
int clk_register(struct clk *clk)
{
down(&clocks_sem);
list_add(&clk->node, &clocks);
up(&clocks_sem);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
down(&clocks_sem);
list_del(&clk->node);
up(&clocks_sem);
}
EXPORT_SYMBOL(clk_unregister);
static int __init clk_init(void)
{
clk_register(&kmi_clk);
clk_register(&uart_clk);
clk_register(&mmci_clk);
return 0;
}
arch_initcall(clk_init);
/*
* linux/arch/arm/mach-realview/clock.h
*
* Copyright (C) 2004 ARM Limited.
* Written by Deep Blue Solutions Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct module;
struct icst307_params;
struct clk {
struct list_head node;
unsigned long rate;
struct module *owner;
const char *name;
const struct icst307_params *params;
void *data;
void (*setvco)(struct clk *, struct icst307_vco vco);
};
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);
/*
* linux/arch/arm/mach-realview/core.c
*
* Copyright (C) 1999 - 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/mach/mmc.h>
#include <asm/hardware/gic.h>
#include "core.h"
#include "clock.h"
#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
/*
* This is the RealView sched_clock implementation. This has
* a resolution of 41.7ns, and a maximum value of about 179s.
*/
unsigned long long sched_clock(void)
{
unsigned long long v;
v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
do_div(v, 3);
return v;
}
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
static int realview_flash_init(void)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
return 0;
}
static void realview_flash_exit(void)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
}
static void realview_flash_set_vpp(int on)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
if (on)
val |= REALVIEW_FLASHPROG_FLVPPEN;
else
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
}
static struct flash_platform_data realview_flash_data = {
.map_name = "cfi_probe",
.width = 4,
.init = realview_flash_init,
.exit = realview_flash_exit,
.set_vpp = realview_flash_set_vpp,
};
static struct resource realview_flash_resource = {
.start = REALVIEW_FLASH_BASE,
.end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE,
.flags = IORESOURCE_MEM,
};
struct platform_device realview_flash_device = {
.name = "armflash",
.id = 0,
.dev = {
.platform_data = &realview_flash_data,
},
.num_resources = 1,
.resource = &realview_flash_resource,
};
static struct resource realview_smc91x_resources[] = {
[0] = {
.start = REALVIEW_ETH_BASE,
.end = REALVIEW_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_ETH,
.end = IRQ_ETH,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device realview_smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(realview_smc91x_resources),
.resource = realview_smc91x_resources,
};
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
{
struct amba_device *adev = container_of(dev, struct amba_device, dev);
u32 mask;
if (adev->res.start == REALVIEW_MMCI0_BASE)
mask = 1;
else
mask = 2;
return readl(REALVIEW_SYSMCI) & mask;
}
struct mmc_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
};
struct mmc_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
};
/*
* Clock handling
*/
static const struct icst307_params realview_oscvco_params = {
.ref = 24000,
.vco_max = 200000,
.vd_min = 4 + 8,
.vd_max = 511 + 8,
.rd_min = 1 + 2,
.rd_max = 127 + 2,
};
static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
u32 val;
val = readl(sys_osc) & ~0x7ffff;
val |= vco.v | (vco.r << 9) | (vco.s << 16);
writel(0xa05f, sys_lock);
writel(val, sys_osc);
writel(0, sys_lock);
}
struct clk realview_clcd_clk = {
.name = "CLCDCLK",
.params = &realview_oscvco_params,
.setvco = realview_oscvco_set,
};
/*
* CLCD support.
*/
#define SYS_CLCD_MODE_MASK (3 << 0)
#define SYS_CLCD_MODE_888 (0 << 0)
#define SYS_CLCD_MODE_5551 (1 << 0)
#define SYS_CLCD_MODE_565_RLSB (2 << 0)
#define SYS_CLCD_MODE_565_BLSB (3 << 0)
#define SYS_CLCD_NLCDIOON (1 << 2)
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
#define SYS_CLCD_ID_MASK (0x1f << 8)
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
#define SYS_CLCD_ID_VGA (0x1f << 8)
static struct clcd_panel vga = {
.mode = {
.name = "VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39721,
.left_margin = 40,
.right_margin = 24,
.upper_margin = 32,
.lower_margin = 11,
.hsync_len = 96,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_BCD | TIM2_IPC,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
static struct clcd_panel sanyo_3_8_in = {
.mode = {
.name = "Sanyo QVGA",
.refresh = 116,
.xres = 320,
.yres = 240,
.pixclock = 100000,
.left_margin = 6,
.right_margin = 6,
.upper_margin = 5,
.lower_margin = 5,
.hsync_len = 6,
.vsync_len = 6,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_BCD,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
static struct clcd_panel sanyo_2_5_in = {
.mode = {
.name = "Sanyo QVGA Portrait",
.refresh = 116,
.xres = 240,
.yres = 320,
.pixclock = 100000,
.left_margin = 20,
.right_margin = 10,
.upper_margin = 2,
.lower_margin = 2,
.hsync_len = 10,
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
static struct clcd_panel epson_2_2_in = {
.mode = {
.name = "Epson QCIF",
.refresh = 390,
.xres = 176,
.yres = 220,
.pixclock = 62500,
.left_margin = 3,
.right_margin = 2,
.upper_margin = 1,
.lower_margin = 0,
.hsync_len = 3,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_BCD | TIM2_IPC,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
/*
* Detect which LCD panel is connected, and return the appropriate
* clcd_panel structure. Note: we do not have any information on
* the required timings for the 8.4in panel, so we presently assume
* VGA timings.
*/
static struct clcd_panel *realview_clcd_panel(void)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
struct clcd_panel *panel = &vga;
u32 val;
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
if (val == SYS_CLCD_ID_SANYO_3_8)
panel = &sanyo_3_8_in;
else if (val == SYS_CLCD_ID_SANYO_2_5)
panel = &sanyo_2_5_in;
else if (val == SYS_CLCD_ID_EPSON_2_2)
panel = &epson_2_2_in;
else if (val == SYS_CLCD_ID_VGA)
panel = &vga;
else {
printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
val);
panel = &vga;
}
return panel;
}
/*
* Disable all display connectors on the interface module.
*/
static void realview_clcd_disable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
}
/*
* Enable the relevant connector on the interface module.
*/
static void realview_clcd_enable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_MODE_MASK;
switch (fb->fb.var.green.length) {
case 5:
val |= SYS_CLCD_MODE_5551;
break;
case 6:
val |= SYS_CLCD_MODE_565_RLSB;
break;
case 8:
val |= SYS_CLCD_MODE_888;
break;
}
/*
* Set the MUX
*/
writel(val, sys_clcd);
/*
* And now enable the PSUs
*/
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
}
static unsigned long framesize = SZ_1M;
static int realview_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->panel = realview_clcd_panel();
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = framesize;
return 0;
}
static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_writecombine(&fb->dev->dev, vma,
fb->fb.screen_base,
fb->fb.fix.smem_start,
fb->fb.fix.smem_len);
}
static void realview_clcd_remove(struct clcd_fb *fb)
{
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
struct clcd_board clcd_plat_data = {
.name = "RealView",
.check = clcdfb_check,
.decode = clcdfb_decode,
.disable = realview_clcd_disable,
.enable = realview_clcd_enable,
.setup = realview_clcd_setup,
.mmap = realview_clcd_mmap,
.remove = realview_clcd_remove,
};
#ifdef CONFIG_LEDS
#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
void realview_leds_event(led_event_t ledevt)
{
unsigned long flags;
u32 val;
local_irq_save(flags);
val = readl(VA_LEDS_BASE);
switch (ledevt) {
case led_idle_start:
val = val & ~REALVIEW_SYS_LED0;
break;
case led_idle_end:
val = val | REALVIEW_SYS_LED0;
break;
case led_timer:
val = val ^ REALVIEW_SYS_LED1;
break;
case led_halted:
val = 0;
break;
default:
break;
}
writel(val, VA_LEDS_BASE);
local_irq_restore(flags);
}
#endif /* CONFIG_LEDS */
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE)
#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE)
#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TIMER_RELOAD (TIMER_INTERVAL)
#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
static unsigned long realview_gettimeoffset(void)
{
unsigned long ticks1, ticks2, status;
/*
* Get the current number of ticks. Note that there is a race
* condition between us reading the timer and checking for
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
+ ((IRQ_TIMERINT0_1 >> 5) << 2));
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
} while (ticks2 > ticks1);
/*
* Number of ticks since last interrupt.
*/
ticks1 = TIMER_RELOAD - ticks2;
/*
* Interrupt pending? If so, we've reloaded once already.
*
* FIXME: Need to check this is effectively timer 0 that expires
*/
if (status & IRQMASK_TIMERINT0_1)
ticks1 += TIMER_RELOAD;
/*
* Convert the ticks to usecs
*/
return TICKS2USECS(ticks1);
}
/*
* IRQ handler for the timer
*/
static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
// ...clear the interrupt
writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
timer_tick(regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction realview_timer_irq = {
.name = "RealView Timer Tick",
.flags = SA_INTERRUPT | SA_TIMER,
.handler = realview_timer_interrupt,
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
static void __init realview_timer_init(void)
{
u32 val;
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
* REALVIEW_TIMCLK is 1MHz
*/
val = readl(__io_address(REALVIEW_SCTL_BASE));
writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
__io_address(REALVIEW_SCTL_BASE));
/*
* Initialise to a known state (all timers off)
*/
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
/*
* Make irqs happen for the system timer
*/
setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
}
struct sys_timer realview_timer = {
.init = realview_timer_init,
.offset = realview_gettimeoffset,
};
/*
* linux/arch/arm/mach-realview/core.h
*
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_REALVIEW_H
#define __ASM_ARCH_REALVIEW_H
#include <asm/hardware/amba.h>
#include <asm/io.h>
#define __io_address(n) __io(IO_ADDRESS(n))
extern struct sys_timer realview_timer;
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
.dev = { \
.coherent_dma_mask = ~0, \
.bus_id = busid, \
.platform_data = plat, \
}, \
.res = { \
.start = REALVIEW_##base##_BASE, \
.end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\
.flags = IORESOURCE_MEM, \
}, \
.dma_mask = ~0, \
.irq = base##_IRQ, \
/* .dma = base##_DMA,*/ \
}
/*
* These devices are connected via the core APB bridge
*/
#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B }
#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_KMI0, NO_IRQ }
#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_KMI1, NO_IRQ }
#define KMI1_DMA { 0, 0 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
#define SMC_IRQ { NO_IRQ, NO_IRQ }
#define SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_DMA { 0, 0 }
#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
#define CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
#define DMAC_DMA { 0, 0 }
/*
* These devices are connected via the core APB bridge
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define SCTL_DMA { 0, 0 }
#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
#define WATCHDOG_DMA { 0, 0 }
#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
#define GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
#define GPIO1_DMA { 0, 0 }
#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
#define RTC_DMA { 0, 0 }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
#define SCI_DMA { 7, 6 }
#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
#define UART0_DMA { 15, 14 }
#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
#define UART1_DMA { 13, 12 }
#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
#define UART2_DMA { 11, 10 }
#define UART3_IRQ { IRQ_UART3, NO_IRQ }
#define UART3_DMA { 0x86, 0x87 }
#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
#define SSP_DMA { 9, 8 }
extern struct platform_device realview_flash_device;
extern struct platform_device realview_smc91x_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clk realview_clcd_clk;
extern struct clcd_board clcd_plat_data;
extern void realview_leds_event(led_event_t ledevt);
#endif
/*
* linux/arch/arm/mach-realview/realview_eb.c
*
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/icst307.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/mmc.h>
#include <asm/arch/irqs.h>
#include "core.h"
#include "clock.h"
static struct map_desc realview_eb_io_desc[] __initdata = {
{ IO_ADDRESS(REALVIEW_SYS_BASE), REALVIEW_SYS_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_GIC_CPU_BASE), REALVIEW_GIC_CPU_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_GIC_DIST_BASE), REALVIEW_GIC_DIST_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_SCTL_BASE), REALVIEW_SCTL_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_TIMER0_1_BASE), REALVIEW_TIMER0_1_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_TIMER2_3_BASE), REALVIEW_TIMER2_3_BASE, SZ_4K, MT_DEVICE },
#ifdef CONFIG_DEBUG_LL
{ IO_ADDRESS(REALVIEW_UART0_BASE), REALVIEW_UART0_BASE, SZ_4K, MT_DEVICE },
#endif
};
static void __init realview_eb_map_io(void)
{
iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
}
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:00", SMC, NULL);
AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL);
AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
static void __init gic_init_irq(void)
{
gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
}
static void __init realview_eb_init(void)
{
int i;
clk_register(&realview_clcd_clk);
platform_device_register(&realview_flash_device);
platform_device_register(&realview_smc91x_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_ram = 0x00000000,
.phys_io = REALVIEW_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
.timer = &realview_timer,
.init_machine = realview_eb_init,
MACHINE_END
...@@ -120,8 +120,8 @@ config CPU_ARM925T ...@@ -120,8 +120,8 @@ config CPU_ARM925T
# ARM926T # ARM926T
config CPU_ARM926T config CPU_ARM926T
bool "Support ARM926T processor" if ARCH_INTEGRATOR bool "Support ARM926T processor"
depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB
default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
select CPU_32v5 select CPU_32v5
select CPU_ABRT_EV5TJ select CPU_ABRT_EV5TJ
...@@ -242,7 +242,7 @@ config CPU_XSCALE ...@@ -242,7 +242,7 @@ config CPU_XSCALE
# ARMv6 # ARMv6
config CPU_V6 config CPU_V6
bool "Support ARM V6 processor" bool "Support ARM V6 processor"
depends on ARCH_INTEGRATOR depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v6 select CPU_32v6
select CPU_ABRT_EV6 select CPU_ABRT_EV6
select CPU_CACHE_V6 select CPU_CACHE_V6
......
/* linux/include/asm-arm/arch-realview/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <asm/hardware/amba_serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xf1000000 @ virtual base
orr \rx, \rx, #0x00009000
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
/*
* linux/include/asm-arm/arch-realview/dma.h
*
* Copyright (C) 2003 ARM Limited.
* Copyright (C) 1997,1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
#define MAX_DMA_ADDRESS 0xffffffff
#define MAX_DMA_CHANNELS 0
#endif /* _ASM_ARCH_DMA_H */
/*
* include/asm-arm/arch-realview/entry-macro.S
*
* Low-level IRQ helper macros for RealView platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/*
* linux/include/asm-arm/arch-realview/hardware.h
*
* This file contains the hardware definitions of the RealView boards.
*
* Copyright (C) 2003 ARM Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
#include <asm/arch/platform.h>
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#endif
/*
* linux/include/asm-arm/arch-realview/io.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
static inline void __iomem *__io(unsigned long addr)
{
return (void __iomem *)addr;
}
#define __io(a) __io(a)
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
#endif
/*
* linux/include/asm-arm/arch-realview/irqs.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/arch/platform.h>
/*
* IRQ interrupts definitions are the same the INT definitions
* held within platform.h
*/
#define IRQ_GIC_START 32
#define IRQ_WDOGINT (IRQ_GIC_START + INT_WDOGINT)
#define IRQ_SOFTINT (IRQ_GIC_START + INT_SOFTINT)
#define IRQ_COMMRx (IRQ_GIC_START + INT_COMMRx)
#define IRQ_COMMTx (IRQ_GIC_START + INT_COMMTx)
#define IRQ_TIMERINT0_1 (IRQ_GIC_START + INT_TIMERINT0_1)
#define IRQ_TIMERINT2_3 (IRQ_GIC_START + INT_TIMERINT2_3)
#define IRQ_GPIOINT0 (IRQ_GIC_START + INT_GPIOINT0)
#define IRQ_GPIOINT1 (IRQ_GIC_START + INT_GPIOINT1)
#define IRQ_GPIOINT2 (IRQ_GIC_START + INT_GPIOINT2)
#define IRQ_GPIOINT3 (IRQ_GIC_START + INT_GPIOINT3)
#define IRQ_RTCINT (IRQ_GIC_START + INT_RTCINT)
#define IRQ_SSPINT (IRQ_GIC_START + INT_SSPINT)
#define IRQ_UARTINT0 (IRQ_GIC_START + INT_UARTINT0)
#define IRQ_UARTINT1 (IRQ_GIC_START + INT_UARTINT1)
#define IRQ_UARTINT2 (IRQ_GIC_START + INT_UARTINT2)
#define IRQ_UART3 (IRQ_GIC_START + INT_UARTINT3)
#define IRQ_SCIINT (IRQ_GIC_START + INT_SCIINT)
#define IRQ_CLCDINT (IRQ_GIC_START + INT_CLCDINT)
#define IRQ_DMAINT (IRQ_GIC_START + INT_DMAINT)
#define IRQ_PWRFAILINT (IRQ_GIC_START + INT_PWRFAILINT)
#define IRQ_MBXINT (IRQ_GIC_START + INT_MBXINT)
#define IRQ_GNDINT (IRQ_GIC_START + INT_GNDINT)
#define IRQ_MMCI0B (IRQ_GIC_START + INT_MMCI0B)
#define IRQ_MMCI1B (IRQ_GIC_START + INT_MMCI1B)
#define IRQ_KMI0 (IRQ_GIC_START + INT_KMI0)
#define IRQ_KMI1 (IRQ_GIC_START + INT_KMI1)
#define IRQ_SCI3 (IRQ_GIC_START + INT_SCI3)
#define IRQ_CLCD (IRQ_GIC_START + INT_CLCD)
#define IRQ_TOUCH (IRQ_GIC_START + INT_TOUCH)
#define IRQ_KEYPAD (IRQ_GIC_START + INT_KEYPAD)
#define IRQ_DoC (IRQ_GIC_START + INT_DoC)
#define IRQ_MMCI0A (IRQ_GIC_START + INT_MMCI0A)
#define IRQ_MMCI1A (IRQ_GIC_START + INT_MMCI1A)
#define IRQ_AACI (IRQ_GIC_START + INT_AACI)
#define IRQ_ETH (IRQ_GIC_START + INT_ETH)
#define IRQ_USB (IRQ_GIC_START + INT_USB)
#define IRQMASK_WDOGINT INTMASK_WDOGINT
#define IRQMASK_SOFTINT INTMASK_SOFTINT
#define IRQMASK_COMMRx INTMASK_COMMRx
#define IRQMASK_COMMTx INTMASK_COMMTx
#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0
#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1
#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2
#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3
#define IRQMASK_RTCINT INTMASK_RTCINT
#define IRQMASK_SSPINT INTMASK_SSPINT
#define IRQMASK_UARTINT0 INTMASK_UARTINT0
#define IRQMASK_UARTINT1 INTMASK_UARTINT1
#define IRQMASK_UARTINT2 INTMASK_UARTINT2
#define IRQMASK_SCIINT INTMASK_SCIINT
#define IRQMASK_CLCDINT INTMASK_CLCDINT
#define IRQMASK_DMAINT INTMASK_DMAINT
#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT
#define IRQMASK_MBXINT INTMASK_MBXINT
#define IRQMASK_GNDINT INTMASK_GNDINT
#define IRQMASK_MMCI0B INTMASK_MMCI0B
#define IRQMASK_MMCI1B INTMASK_MMCI1B
#define IRQMASK_KMI0 INTMASK_KMI0
#define IRQMASK_KMI1 INTMASK_KMI1
#define IRQMASK_SCI3 INTMASK_SCI3
#define IRQMASK_UART3 INTMASK_UART3
#define IRQMASK_CLCD INTMASK_CLCD
#define IRQMASK_TOUCH INTMASK_TOUCH
#define IRQMASK_KEYPAD INTMASK_KEYPAD
#define IRQMASK_DoC INTMASK_DoC
#define IRQMASK_MMCI0A INTMASK_MMCI0A
#define IRQMASK_MMCI1A INTMASK_MMCI1A
#define IRQMASK_AACI INTMASK_AACI
#define IRQMASK_ETH INTMASK_ETH
#define IRQMASK_USB INTMASK_USB
#define NR_IRQS (IRQ_GIC_START + 64)
/*
* linux/include/asm-arm/arch-realview/memory.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET (0x00000000UL)
/*
* Virtual view <-> DMA view memory address translations
* virt_to_bus: Used to translate the virtual address to an
* address suitable to be passed to set_dma_addr
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
#endif
/*
* linux/include/asm-arm/arch-realview/param.h
*
* Copyright (C) 2002 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* linux/include/asm-arm/arch-realview/platform.h
*
* Copyright (c) ARM Limited 2003. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __address_h
#define __address_h 1
/*
* Memory definitions
*/
#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
#define REALVIEW_BOOT_ROM_HI 0x30000000
#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */
#define REALVIEW_BOOT_ROM_SIZE SZ_64M
#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */
#define REALVIEW_SSRAM_SIZE SZ_2M
#define REALVIEW_FLASH_BASE 0x40000000
#define REALVIEW_FLASH_SIZE SZ_64M
/*
* SDRAM
*/
#define REALVIEW_SDRAM_BASE 0x00000000
/*
* Logic expansion modules
*
*/
/* ------------------------------------------------------------------------
* RealView Registers
* ------------------------------------------------------------------------
*
*/
#define REALVIEW_SYS_ID_OFFSET 0x00
#define REALVIEW_SYS_SW_OFFSET 0x04
#define REALVIEW_SYS_LED_OFFSET 0x08
#define REALVIEW_SYS_OSC0_OFFSET 0x0C
#define REALVIEW_SYS_OSC1_OFFSET 0x10
#define REALVIEW_SYS_OSC2_OFFSET 0x14
#define REALVIEW_SYS_OSC3_OFFSET 0x18
#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */
#define REALVIEW_SYS_LOCK_OFFSET 0x20
#define REALVIEW_SYS_100HZ_OFFSET 0x24
#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28
#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C
#define REALVIEW_SYS_FLAGS_OFFSET 0x30
#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30
#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34
#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38
#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38
#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C
#define REALVIEW_SYS_RESETCTL_OFFSET 0x40
#define REALVIEW_SYS_PCICTL_OFFSET 0x44
#define REALVIEW_SYS_MCI_OFFSET 0x48
#define REALVIEW_SYS_FLASH_OFFSET 0x4C
#define REALVIEW_SYS_CLCD_OFFSET 0x50
#define REALVIEW_SYS_CLCDSER_OFFSET 0x54
#define REALVIEW_SYS_BOOTCS_OFFSET 0x58
#define REALVIEW_SYS_24MHz_OFFSET 0x5C
#define REALVIEW_SYS_MISC_OFFSET 0x60
#define REALVIEW_SYS_IOSEL_OFFSET 0x70
#define REALVIEW_SYS_TEST_OSC0_OFFSET 0x80
#define REALVIEW_SYS_TEST_OSC1_OFFSET 0x84
#define REALVIEW_SYS_TEST_OSC2_OFFSET 0x88
#define REALVIEW_SYS_TEST_OSC3_OFFSET 0x8C
#define REALVIEW_SYS_TEST_OSC4_OFFSET 0x90
#define REALVIEW_SYS_BASE 0x10000000
#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
/*
* Values for REALVIEW_SYS_RESET_CTRL
*/
#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01
#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02
#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03
#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04
#define REALVIEW_SYS_CTRL_RESET_POR 0x05
#define REALVIEW_SYS_CTRL_RESET_DoC 0x06
#define REALVIEW_SYS_CTRL_LED (1 << 0)
/* ------------------------------------------------------------------------
* RealView control registers
* ------------------------------------------------------------------------
*/
/*
* REALVIEW_IDFIELD
*
* 31:24 = manufacturer (0x41 = ARM)
* 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
* 15:12 = FPGA (0x3 = XVC600 or XVC600E)
* 11:4 = build value
* 3:0 = revision number (0x1 = rev B (AHB))
*/
/*
* REALVIEW_SYS_LOCK
* control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
* SYS_CLD, SYS_BOOTCS
*/
#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
/*
* REALVIEW_SYS_FLASH
*/
#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
/*
* REALVIEW_INTREG
* - used to acknowledge and control MMCI and UART interrupts
*/
#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */
/* write 1 to acknowledge and clear */
#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
/*
* REALVIEW peripheral addresses
*/
#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */
#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */
/* Reserved 0x10003000 */
#define REALVIEW_AACI_BASE 0x10004000 /* Audio */
#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */
#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */
#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */
#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */
#define REALVIEW_UART0_BASE 0x10009000 /* UART 0 */
#define REALVIEW_UART1_BASE 0x1000A000 /* UART 1 */
#define REALVIEW_UART2_BASE 0x1000B000 /* UART 2 */
#define REALVIEW_UART3_BASE 0x1000C000 /* UART 3 */
#define REALVIEW_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */
/* Reserved 0x1000F000 */
#define REALVIEW_WATCHDOG_BASE 0x10010000 /* watchdog interface */
#define REALVIEW_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
#define REALVIEW_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
#define REALVIEW_GPIO0_BASE 0x10013000 /* GPIO port 0 */
#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */
#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */
/* Reserved 0x10016000 */
#define REALVIEW_RTC_BASE 0x10017000 /* Real Time Clock */
#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */
#define REALVIEW_PCI_CORE_BASE 0x10019000 /* PCI configuration */
/* Reserved 0x1001A000 - 0x1001FFFF */
#define REALVIEW_CLCD_BASE 0x10020000 /* CLCD */
#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */
#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#define REALVIEW_SMC_BASE 0x10080000 /* SMC */
/* Reserved 0x10090000 - 0x100EFFFF */
#define REALVIEW_ETH_BASE 0x4E000000 /* Ethernet */
/* PCI space */
#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */
#define REALVIEW_PCI_CFG_BASE 0x42000000
#define REALVIEW_PCI_MEM_BASE0 0x44000000
#define REALVIEW_PCI_MEM_BASE1 0x50000000
#define REALVIEW_PCI_MEM_BASE2 0x60000000
/* Sizes of above maps */
#define REALVIEW_PCI_BASE_SIZE 0x01000000
#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000
#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
/*
* Disk on Chip
*/
#define REALVIEW_DOC_BASE 0x2C000000
#define REALVIEW_DOC_SIZE (16 << 20)
#define REALVIEW_DOC_PAGE_SIZE 512
#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE)
#define ERASE_UNIT_PAGES 32
#define START_PAGE 0x80
/*
* LED settings, bits [7:0]
*/
#define REALVIEW_SYS_LED0 (1 << 0)
#define REALVIEW_SYS_LED1 (1 << 1)
#define REALVIEW_SYS_LED2 (1 << 2)
#define REALVIEW_SYS_LED3 (1 << 3)
#define REALVIEW_SYS_LED4 (1 << 4)
#define REALVIEW_SYS_LED5 (1 << 5)
#define REALVIEW_SYS_LED6 (1 << 6)
#define REALVIEW_SYS_LED7 (1 << 7)
#define ALL_LEDS 0xFF
#define LED_BANK REALVIEW_SYS_LED
/*
* Control registers
*/
#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */
#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */
#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */
#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */
/* ------------------------------------------------------------------------
* Interrupts - bit assignment (primary)
* ------------------------------------------------------------------------
*/
#define INT_WDOGINT 0 /* Watchdog timer */
#define INT_SOFTINT 1 /* Software interrupt */
#define INT_COMMRx 2 /* Debug Comm Rx interrupt */
#define INT_COMMTx 3 /* Debug Comm Tx interrupt */
#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */
#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */
#define INT_GPIOINT0 6 /* GPIO 0 */
#define INT_GPIOINT1 7 /* GPIO 1 */
#define INT_GPIOINT2 8 /* GPIO 2 */
/* 9 reserved */
#define INT_RTCINT 10 /* Real Time Clock */
#define INT_SSPINT 11 /* Synchronous Serial Port */
#define INT_UARTINT0 12 /* UART 0 on development chip */
#define INT_UARTINT1 13 /* UART 1 on development chip */
#define INT_UARTINT2 14 /* UART 2 on development chip */
#define INT_UARTINT3 15 /* UART 3 on development chip */
#define INT_SCIINT 16 /* Smart Card Interface */
#define INT_MMCI0A 17 /* Multimedia Card 0A */
#define INT_MMCI0B 18 /* Multimedia Card 0B */
#define INT_AACI 19 /* Audio Codec */
#define INT_KMI0 20 /* Keyboard/Mouse port 0 */
#define INT_KMI1 21 /* Keyboard/Mouse port 1 */
#define INT_CHARLCD 22 /* Character LCD */
#define INT_CLCDINT 23 /* CLCD controller */
#define INT_DMAINT 24 /* DMA controller */
#define INT_PWRFAILINT 25 /* Power failure */
#define INT_PISMO 26
#define INT_DoC 27 /* Disk on Chip memory controller */
#define INT_ETH 28 /* Ethernet controller */
#define INT_USB 29 /* USB controller */
#define INT_TSPENINT 30 /* Touchscreen pen */
#define INT_TSKPADINT 31 /* Touchscreen keypad */
/*
* Interrupt bit positions
*
*/
#define INTMASK_WDOGINT (1 << INT_WDOGINT)
#define INTMASK_SOFTINT (1 << INT_SOFTINT)
#define INTMASK_COMMRx (1 << INT_COMMRx)
#define INTMASK_COMMTx (1 << INT_COMMTx)
#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1)
#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3)
#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0)
#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1)
#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2)
#define INTMASK_RTCINT (1 << INT_RTCINT)
#define INTMASK_SSPINT (1 << INT_SSPINT)
#define INTMASK_UARTINT0 (1 << INT_UARTINT0)
#define INTMASK_UARTINT1 (1 << INT_UARTINT1)
#define INTMASK_UARTINT2 (1 << INT_UARTINT2)
#define INTMASK_UARTINT3 (1 << INT_UARTINT3)
#define INTMASK_SCIINT (1 << INT_SCIINT)
#define INTMASK_MMCI0A (1 << INT_MMCI0A)
#define INTMASK_MMCI0B (1 << INT_MMCI0B)
#define INTMASK_AACI (1 << INT_AACI)
#define INTMASK_KMI0 (1 << INT_KMI0)
#define INTMASK_KMI1 (1 << INT_KMI1)
#define INTMASK_CHARLCD (1 << INT_CHARLCD)
#define INTMASK_CLCDINT (1 << INT_CLCDINT)
#define INTMASK_DMAINT (1 << INT_DMAINT)
#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT)
#define INTMASK_PISMO (1 << INT_PISMO)
#define INTMASK_DoC (1 << INT_DoC)
#define INTMASK_ETH (1 << INT_ETH)
#define INTMASK_USB (1 << INT_USB)
#define INTMASK_TSPENINT (1 << INT_TSPENINT)
#define INTMASK_TSKPADINT (1 << INT_TSKPADINT)
#define MAXIRQNUM 31
#define MAXFIQNUM 31
#define MAXSWINUM 31
/*
* Application Flash
*
*/
#define FLASH_BASE REALVIEW_FLASH_BASE
#define FLASH_SIZE REALVIEW_FLASH_SIZE
#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1)
#define FLASH_BLOCK_SIZE SZ_128K
/*
* Boot Flash
*
*/
#define EPROM_BASE REALVIEW_BOOT_ROM_HI
#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE
#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1)
/*
* Clean base - dummy
*
*/
#define CLEAN_BASE EPROM_BASE
/*
* System controller bit assignment
*/
#define REALVIEW_REFCLK 0
#define REALVIEW_TIMCLK 1
#define REALVIEW_TIMER1_EnSel 15
#define REALVIEW_TIMER2_EnSel 17
#define REALVIEW_TIMER3_EnSel 19
#define REALVIEW_TIMER4_EnSel 21
#define MAX_TIMER 2
#define MAX_PERIOD 699050
#define TICKS_PER_uSEC 1
/*
* These are useconds NOT ticks.
*
*/
#define mSEC_1 1000
#define mSEC_5 (mSEC_1 * 5)
#define mSEC_10 (mSEC_1 * 10)
#define mSEC_25 (mSEC_1 * 25)
#define SEC_1 (mSEC_1 * 1000)
#define REALVIEW_CSR_BASE 0x10000000
#define REALVIEW_CSR_SIZE 0x10000000
#endif
/* END */
/*
* linux/include/asm-arm/arch-realview/system.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/platform.h>
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
unsigned int hdr_ctrl = (IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET);
unsigned int val;
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
val = __raw_readl(hdr_ctrl);
val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
__raw_writel(val, hdr_ctrl);
}
#endif
/*
* linux/include/asm-arm/arch-realview/timex.h
*
* RealView architecture timex specifications
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define CLOCK_TICK_RATE (50000000 / 16)
/*
* linux/include/asm-arm/arch-realview/uncompress.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/hardware.h>
#define AMBA_UART_DR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00))
#define AMBA_UART_LCRH (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c))
#define AMBA_UART_CR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30))
#define AMBA_UART_FR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x18))
/*
* This does not append a newline
*/
static void putstr(const char *s)
{
while (*s) {
while (AMBA_UART_FR & (1 << 5))
barrier();
AMBA_UART_DR = *s;
if (*s == '\n') {
while (AMBA_UART_FR & (1 << 5))
barrier();
AMBA_UART_DR = '\r';
}
s++;
}
while (AMBA_UART_FR & (1 << 3))
barrier();
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()
/*
* linux/include/asm-arm/arch-realview/vmalloc.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
#define CLCD_UBAS 0x00000010 #define CLCD_UBAS 0x00000010
#define CLCD_LBAS 0x00000014 #define CLCD_LBAS 0x00000014
#ifndef CONFIG_ARCH_VERSATILE #if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
#define CLCD_IENB 0x00000018 #define CLCD_IENB 0x00000018
#define CLCD_CNTL 0x0000001c #define CLCD_CNTL 0x0000001c
#else #else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment