ASoC: samsung: i2s: Ensure the RCLK rate is properly determined

BugLink: https://bugs.launchpad.net/bugs/1775771

[ Upstream commit 647d04f8 ]

If the RCLK mux clock configuration is specified in DT and no set_sysclk()
callback is used in the sound card driver the sclk_srcrate field will remain
set to 0, leading to an incorrect PSR divider setting.
To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock,
so the actual RCLK mux selection is taken into account.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>

sound/soc/samsung/i2s.c

@@ -640,8 +640,12 @@ static int i2s_set_fmt(struct snd_soc_dai *dai,
 		tmp |= mod_slave;
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
-		/* Set default source clock in Master mode */
-		if (i2s->rclk_srcrate == 0)
+		/*
+		 * Set default source clock in Master mode, only when the
+		 * CLK_I2S_RCLK_SRC clock is not exposed so we ensure any
+		 * clock configuration assigned in DT is not overwritten.
+		 */
+		if (i2s->rclk_srcrate == 0 && i2s->clk_data.clks == NULL)
 			i2s_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0,
 							0, SND_SOC_CLOCK_IN);
 		break;
@@ -856,6 +860,11 @@ static int config_setup(struct i2s_dai *i2s)
 		return 0;
 
 	if (!(i2s->quirks & QUIRK_NO_MUXPSR)) {
+		struct clk *rclksrc = i2s->clk_table[CLK_I2S_RCLK_SRC];
+
+		if (i2s->rclk_srcrate == 0 && rclksrc && !IS_ERR(rclksrc))
+			i2s->rclk_srcrate = clk_get_rate(rclksrc);
+
 		psr = i2s->rclk_srcrate / i2s->frmclk / rfs;
 		writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR);
 		dev_dbg(&i2s->pdev->dev,