Skip to content

L
linux
Commit 8cf41f31 authored by Dave Airlie's avatar Dave Airlie Committed by Jani Nikula
Browse files
Options

drm/i915: refactor pll code out into intel_dpll.c 

This pulls a large chunk of the pll calculation code out of
intel_display.c to a new file.

One function makes sense to be an inline, otherwise this
is pretty much a straight copy cover. Also all the
remaining hooks for g45 and older end up the same now.
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
[Jani: cleaned up intel_dpll.h a bit, de-duped intel_panel_use_ssc().]
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/74b58e0572858b5d1734818ca594a23040d7d44f.1610622609.git.jani.nikula@intel.com
parent fbf756c3
Show whitespace changes
Inline Side-by-side
Showing with 1414 additions and 1391 deletions
drivers/gpu/drm/i915/Makefile
View file @ 8cf41f31
......@@ -202,6 +202,7 @@ i915-y += \
display/intel_display.o \
display/intel_display_power.o \
display/intel_dpio_phy.o \
display/intel_dpll.o \
display/intel_dpll_mgr.o \
display/intel_dsb.o \
display/intel_fbc.o \
......
drivers/gpu/drm/i915/display/intel_display.c
View file @ 8cf41f31
......@@ -48,6 +48,7 @@
#include "display/intel_display_debugfs.h"
#include "display/intel_dp.h"
#include "display/intel_dp_mst.h"
#include "display/intel_dpll.h"
#include "display/intel_dpll_mgr.h"
#include "display/intel_dsi.h"
#include "display/intel_dvo.h"
......@@ -115,17 +116,6 @@ static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state);
static void intel_modeset_setup_hw_state(struct drm_device *dev,
struct drm_modeset_acquire_ctx *ctx);
struct intel_limit {
struct {
int min, max;
} dot, vco, n, m, m1, m2, p, p1;
struct {
int dot_limit;
int p2_slow, p2_fast;
} p2;
};
/* returns HPLL frequency in kHz */
int vlv_get_hpll_vco(struct drm_i915_private *dev_priv)
{
......@@ -193,271 +183,6 @@ static u32 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
return dev_priv->fdi_pll_freq;
}
static const struct intel_limit intel_limits_i8xx_dac = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 908000, .max = 1512000 },
.n = { .min = 2, .max = 16 },
.m = { .min = 96, .max = 140 },
.m1 = { .min = 18, .max = 26 },
.m2 = { .min = 6, .max = 16 },
.p = { .min = 4, .max = 128 },
.p1 = { .min = 2, .max = 33 },
.p2 = { .dot_limit = 165000,
.p2_slow = 4, .p2_fast = 2 },
};
static const struct intel_limit intel_limits_i8xx_dvo = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 908000, .max = 1512000 },
.n = { .min = 2, .max = 16 },
.m = { .min = 96, .max = 140 },
.m1 = { .min = 18, .max = 26 },
.m2 = { .min = 6, .max = 16 },
.p = { .min = 4, .max = 128 },
.p1 = { .min = 2, .max = 33 },
.p2 = { .dot_limit = 165000,
.p2_slow = 4, .p2_fast = 4 },
};
static const struct intel_limit intel_limits_i8xx_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 908000, .max = 1512000 },
.n = { .min = 2, .max = 16 },
.m = { .min = 96, .max = 140 },
.m1 = { .min = 18, .max = 26 },
.m2 = { .min = 6, .max = 16 },
.p = { .min = 4, .max = 128 },
.p1 = { .min = 1, .max = 6 },
.p2 = { .dot_limit = 165000,
.p2_slow = 14, .p2_fast = 7 },
};
static const struct intel_limit intel_limits_i9xx_sdvo = {
.dot = { .min = 20000, .max = 400000 },
.vco = { .min = 1400000, .max = 2800000 },
.n = { .min = 1, .max = 6 },
.m = { .min = 70, .max = 120 },
.m1 = { .min = 8, .max = 18 },
.m2 = { .min = 3, .max = 7 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit intel_limits_i9xx_lvds = {
.dot = { .min = 20000, .max = 400000 },
.vco = { .min = 1400000, .max = 2800000 },
.n = { .min = 1, .max = 6 },
.m = { .min = 70, .max = 120 },
.m1 = { .min = 8, .max = 18 },
.m2 = { .min = 3, .max = 7 },
.p = { .min = 7, .max = 98 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 7 },
};
static const struct intel_limit intel_limits_g4x_sdvo = {
.dot = { .min = 25000, .max = 270000 },
.vco = { .min = 1750000, .max = 3500000},
.n = { .min = 1, .max = 4 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 17, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 10, .max = 30 },
.p1 = { .min = 1, .max = 3},
.p2 = { .dot_limit = 270000,
.p2_slow = 10,
.p2_fast = 10
},
};
static const struct intel_limit intel_limits_g4x_hdmi = {
.dot = { .min = 22000, .max = 400000 },
.vco = { .min = 1750000, .max = 3500000},
.n = { .min = 1, .max = 4 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 16, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8},
.p2 = { .dot_limit = 165000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
.dot = { .min = 20000, .max = 115000 },
.vco = { .min = 1750000, .max = 3500000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 17, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 0,
.p2_slow = 14, .p2_fast = 14
},
};
static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
.dot = { .min = 80000, .max = 224000 },
.vco = { .min = 1750000, .max = 3500000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 17, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 14, .max = 42 },
.p1 = { .min = 2, .max = 6 },
.p2 = { .dot_limit = 0,
.p2_slow = 7, .p2_fast = 7
},
};
static const struct intel_limit pnv_limits_sdvo = {
.dot = { .min = 20000, .max = 400000},
.vco = { .min = 1700000, .max = 3500000 },
/* Pineview's Ncounter is a ring counter */
.n = { .min = 3, .max = 6 },
.m = { .min = 2, .max = 256 },
/* Pineview only has one combined m divider, which we treat as m2. */
.m1 = { .min = 0, .max = 0 },
.m2 = { .min = 0, .max = 254 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit pnv_limits_lvds = {
.dot = { .min = 20000, .max = 400000 },
.vco = { .min = 1700000, .max = 3500000 },
.n = { .min = 3, .max = 6 },
.m = { .min = 2, .max = 256 },
.m1 = { .min = 0, .max = 0 },
.m2 = { .min = 0, .max = 254 },
.p = { .min = 7, .max = 112 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 14 },
};
/* Ironlake / Sandybridge
*
* We calculate clock using (register_value + 2) for N/M1/M2, so here
* the range value for them is (actual_value - 2).
*/
static const struct intel_limit ilk_limits_dac = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 5 },
.m = { .min = 79, .max = 127 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit ilk_limits_single_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 79, .max = 118 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 14, .p2_fast = 14 },
};
static const struct intel_limit ilk_limits_dual_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 79, .max = 127 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 14, .max = 56 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 7, .p2_fast = 7 },
};
/* LVDS 100mhz refclk limits. */
static const struct intel_limit ilk_limits_single_lvds_100m = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 2 },
.m = { .min = 79, .max = 126 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 14, .p2_fast = 14 },
};
static const struct intel_limit ilk_limits_dual_lvds_100m = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 79, .max = 126 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 14, .max = 42 },
.p1 = { .min = 2, .max = 6 },
.p2 = { .dot_limit = 225000,
.p2_slow = 7, .p2_fast = 7 },
};
static const struct intel_limit intel_limits_vlv = {
/*
* These are the data rate limits (measured in fast clocks)
* since those are the strictest limits we have. The fast
* clock and actual rate limits are more relaxed, so checking
* them would make no difference.
*/
.dot = { .min = 25000 * 5, .max = 270000 * 5 },
.vco = { .min = 4000000, .max = 6000000 },
.n = { .min = 1, .max = 7 },
.m1 = { .min = 2, .max = 3 },
.m2 = { .min = 11, .max = 156 },
.p1 = { .min = 2, .max = 3 },
.p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
};
static const struct intel_limit intel_limits_chv = {
/*
* These are the data rate limits (measured in fast clocks)
* since those are the strictest limits we have. The fast
* clock and actual rate limits are more relaxed, so checking
* them would make no difference.
*/
.dot = { .min = 25000 * 5, .max = 540000 * 5},
.vco = { .min = 4800000, .max = 6480000 },
.n = { .min = 1, .max = 1 },
.m1 = { .min = 2, .max = 2 },
.m2 = { .min = 24 << 22, .max = 175 << 22 },
.p1 = { .min = 2, .max = 4 },
.p2 = { .p2_slow = 1, .p2_fast = 14 },
};
static const struct intel_limit intel_limits_bxt = {
/* FIXME: find real dot limits */
.dot = { .min = 0, .max = INT_MAX },
.vco = { .min = 4800000, .max = 6700000 },
.n = { .min = 1, .max = 1 },
.m1 = { .min = 2, .max = 2 },
/* FIXME: find real m2 limits */
.m2 = { .min = 2 << 22, .max = 255 << 22 },
.p1 = { .min = 2, .max = 4 },
.p2 = { .p2_slow = 1, .p2_fast = 20 },
};
/* WA Display #0827: Gen9:all */
static void
skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable)
......@@ -502,483 +227,6 @@ is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state)
is_trans_port_sync_slave(crtc_state);
}
/*
* Platform specific helpers to calculate the port PLL loopback- (clock.m),
* and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
* (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
* The helpers' return value is the rate of the clock that is fed to the
* display engine's pipe which can be the above fast dot clock rate or a
* divided-down version of it.
*/
/* m1 is reserved as 0 in Pineview, n is a ring counter */
static int pnv_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = clock->m2 + 2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot;
}
static u32 i9xx_dpll_compute_m(struct dpll *dpll)
{
return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
}
static int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = i9xx_dpll_compute_m(clock);
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot;
}
static int vlv_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = clock->m1 * clock->m2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot / 5;
}
int chv_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = clock->m1 * clock->m2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m),
clock->n << 22);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot / 5;
}
/*
* Returns whether the given set of divisors are valid for a given refclk with
* the given connectors.
*/
static bool intel_pll_is_valid(struct drm_i915_private *dev_priv,
const struct intel_limit *limit,
const struct dpll *clock)
{
if (clock->n < limit->n.min || limit->n.max < clock->n)
return false;
if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
return false;
if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
return false;
if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
return false;
if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
!IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
if (clock->m1 <= clock->m2)
return false;
if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
!IS_GEN9_LP(dev_priv)) {
if (clock->p < limit->p.min || limit->p.max < clock->p)
return false;
if (clock->m < limit->m.min || limit->m.max < clock->m)
return false;
}
if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
return false;
/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
* connector, etc., rather than just a single range.
*/
if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
return false;
return true;
}
static int
i9xx_select_p2_div(const struct intel_limit *limit,
const struct intel_crtc_state *crtc_state,
int target)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* For LVDS just rely on its current settings for dual-channel.
* We haven't figured out how to reliably set up different
* single/dual channel state, if we even can.
*/
if (intel_is_dual_link_lvds(dev_priv))
return limit->p2.p2_fast;
else
return limit->p2.p2_slow;
} else {
if (target < limit->p2.dot_limit)
return limit->p2.p2_slow;
else
return limit->p2.p2_fast;
}
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*
* Target and reference clocks are specified in kHz.
*
* If match_clock is provided, then best_clock P divider must match the P
* divider from @match_clock used for LVDS downclocking.
*/
static bool
i9xx_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct drm_device *dev = crtc_state->uapi.crtc->dev;
struct dpll clock;
int err = target;
memset(best_clock, 0, sizeof(*best_clock));
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.m2 <= limit->m2.max; clock.m2++) {
if (clock.m2 >= clock.m1)
break;
for (clock.n = limit->n.min;
clock.n <= limit->n.max; clock.n++) {
for (clock.p1 = limit->p1.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
i9xx_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
if (match_clock &&
clock.p != match_clock->p)
continue;
this_err = abs(clock.dot - target);
if (this_err < err) {
*best_clock = clock;
err = this_err;
}
}
}
}
}
return (err != target);
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*
* Target and reference clocks are specified in kHz.
*
* If match_clock is provided, then best_clock P divider must match the P
* divider from @match_clock used for LVDS downclocking.
*/
static bool
pnv_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct drm_device *dev = crtc_state->uapi.crtc->dev;
struct dpll clock;
int err = target;
memset(best_clock, 0, sizeof(*best_clock));
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.m2 <= limit->m2.max; clock.m2++) {
for (clock.n = limit->n.min;
clock.n <= limit->n.max; clock.n++) {
for (clock.p1 = limit->p1.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
pnv_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
if (match_clock &&
clock.p != match_clock->p)
continue;
this_err = abs(clock.dot - target);
if (this_err < err) {
*best_clock = clock;
err = this_err;
}
}
}
}
}
return (err != target);
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*
* Target and reference clocks are specified in kHz.
*
* If match_clock is provided, then best_clock P divider must match the P
* divider from @match_clock used for LVDS downclocking.
*/
static bool
g4x_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct drm_device *dev = crtc_state->uapi.crtc->dev;
struct dpll clock;
int max_n;
bool found = false;
/* approximately equals target * 0.00585 */
int err_most = (target >> 8) + (target >> 9);
memset(best_clock, 0, sizeof(*best_clock));
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
max_n = limit->n.max;
/* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
/* based on hardware requirement, prefere larger m1,m2 */
for (clock.m1 = limit->m1.max;
clock.m1 >= limit->m1.min; clock.m1--) {
for (clock.m2 = limit->m2.max;
clock.m2 >= limit->m2.min; clock.m2--) {
for (clock.p1 = limit->p1.max;
clock.p1 >= limit->p1.min; clock.p1--) {
int this_err;
i9xx_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
this_err = abs(clock.dot - target);
if (this_err < err_most) {
*best_clock = clock;
err_most = this_err;
max_n = clock.n;
found = true;
}
}
}
}
}
return found;
}
/*
* Check if the calculated PLL configuration is more optimal compared to the
* best configuration and error found so far. Return the calculated error.
*/
static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
const struct dpll *calculated_clock,
const struct dpll *best_clock,
unsigned int best_error_ppm,
unsigned int *error_ppm)
{
/*
* For CHV ignore the error and consider only the P value.
* Prefer a bigger P value based on HW requirements.
*/
if (IS_CHERRYVIEW(to_i915(dev))) {
*error_ppm = 0;
return calculated_clock->p > best_clock->p;
}
if (drm_WARN_ON_ONCE(dev, !target_freq))
return false;
*error_ppm = div_u64(1000000ULL *
abs(target_freq - calculated_clock->dot),
target_freq);
/*
* Prefer a better P value over a better (smaller) error if the error
* is small. Ensure this preference for future configurations too by
* setting the error to 0.
*/
if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
*error_ppm = 0;
return true;
}
return *error_ppm + 10 < best_error_ppm;
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
static bool
vlv_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_device *dev = crtc->base.dev;
struct dpll clock;
unsigned int bestppm = 1000000;
/* min update 19.2 MHz */
int max_n = min(limit->n.max, refclk / 19200);
bool found = false;
target *= 5; /* fast clock */
memset(best_clock, 0, sizeof(*best_clock));
/* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
clock.p2 -= clock.p2 > 10 ? 2 : 1) {
clock.p = clock.p1 * clock.p2;
/* based on hardware requirement, prefer bigger m1,m2 values */
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
unsigned int ppm;
clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
refclk * clock.m1);
vlv_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
if (!vlv_PLL_is_optimal(dev, target,
&clock,
best_clock,
bestppm, &ppm))
continue;
*best_clock = clock;
bestppm = ppm;
found = true;
}
}
}
}
return found;
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
static bool
chv_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_device *dev = crtc->base.dev;
unsigned int best_error_ppm;
struct dpll clock;
u64 m2;
int found = false;
memset(best_clock, 0, sizeof(*best_clock));
best_error_ppm = 1000000;
/*
* Based on hardware doc, the n always set to 1, and m1 always
* set to 2. If requires to support 200Mhz refclk, we need to
* revisit this because n may not 1 anymore.
*/
clock.n = 1;
clock.m1 = 2;
target *= 5; /* fast clock */
for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
for (clock.p2 = limit->p2.p2_fast;
clock.p2 >= limit->p2.p2_slow;
clock.p2 -= clock.p2 > 10 ? 2 : 1) {
unsigned int error_ppm;
clock.p = clock.p1 * clock.p2;
m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22,
refclk * clock.m1);
if (m2 > INT_MAX/clock.m1)
continue;
clock.m2 = m2;
chv_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev), limit, &clock))
continue;
if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
best_error_ppm, &error_ppm))
continue;
*best_clock = clock;
best_error_ppm = error_ppm;
found = true;
}
}
return found;
}
bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state,
struct dpll *best_clock)
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_bxt;
return chv_find_best_dpll(limit, crtc_state,
crtc_state->port_clock, refclk,
NULL, best_clock);
}
static bool pipe_scanline_is_moving(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
......@@ -5235,7 +4483,7 @@ static void ivb_update_fdi_bc_bifurcation(const struct intel_crtc_state *crtc_st
* Finds the encoder associated with the given CRTC. This can only be
* used when we know that the CRTC isn't feeding multiple encoders!
*/
static struct intel_encoder *
struct intel_encoder *
intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
const struct intel_crtc_state *crtc_state)
{
......@@ -7903,51 +7151,6 @@ static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv)
}
}
static bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
if (dev_priv->params.panel_use_ssc >= 0)
return dev_priv->params.panel_use_ssc != 0;
return dev_priv->vbt.lvds_use_ssc
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
static u32 pnv_dpll_compute_fp(struct dpll *dpll)
{
return (1 << dpll->n) << 16 | dpll->m2;
}
static u32 i9xx_dpll_compute_fp(struct dpll *dpll)
{
return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
}
static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 fp, fp2 = 0;
if (IS_PINEVIEW(dev_priv)) {
fp = pnv_dpll_compute_fp(&crtc_state->dpll);
if (reduced_clock)
fp2 = pnv_dpll_compute_fp(reduced_clock);
} else {
fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
if (reduced_clock)
fp2 = i9xx_dpll_compute_fp(reduced_clock);
}
crtc_state->dpll_hw_state.fp0 = fp;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
reduced_clock) {
crtc_state->dpll_hw_state.fp1 = fp2;
} else {
crtc_state->dpll_hw_state.fp1 = fp;
}
}
static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
pipe)
{
......@@ -8072,39 +7275,6 @@ void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_s
intel_cpu_transcoder_set_m_n(crtc_state, dp_m_n, dp_m2_n2);
}
static void vlv_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (crtc->pipe != PIPE_A)
pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
/* DPLL not used with DSI, but still need the rest set up */
if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
DPLL_EXT_BUFFER_ENABLE_VLV;
pipe_config->dpll_hw_state.dpll_md =
(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
static void chv_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (crtc->pipe != PIPE_A)
pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
/* DPLL not used with DSI, but still need the rest set up */
if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
pipe_config->dpll_hw_state.dpll_md =
(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
static void vlv_prepare_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config)
{
......@@ -8314,179 +7484,58 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
* @dev_priv: i915 private structure
* @pipe: pipe PLL to enable
* @dpll: PLL configuration
*
* Enable the PLL for @pipe using the supplied @dpll config. To be used
* in cases where we need the PLL enabled even when @pipe is not going to
* be enabled.
*/
int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
const struct dpll *dpll)
{
struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
struct intel_crtc_state *pipe_config;
pipe_config = intel_crtc_state_alloc(crtc);
if (!pipe_config)
return -ENOMEM;
pipe_config->cpu_transcoder = (enum transcoder)pipe;
pipe_config->pixel_multiplier = 1;
pipe_config->dpll = *dpll;
if (IS_CHERRYVIEW(dev_priv)) {
chv_compute_dpll(crtc, pipe_config);
chv_prepare_pll(crtc, pipe_config);
chv_enable_pll(crtc, pipe_config);
} else {
vlv_compute_dpll(crtc, pipe_config);
vlv_prepare_pll(crtc, pipe_config);
vlv_enable_pll(crtc, pipe_config);
}
kfree(pipe_config);
return 0;
}
/**
* vlv_force_pll_off - forcibly disable just the PLL
* @dev_priv: i915 private structure
* @pipe: pipe PLL to disable
*
* Disable the PLL for @pipe. To be used in cases where we need
* the PLL enabled even when @pipe is not going to be enabled.
*/
void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe)
{
if (IS_CHERRYVIEW(dev_priv))
chv_disable_pll(dev_priv, pipe);
else
vlv_disable_pll(dev_priv, pipe);
}
static void i9xx_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 dpll;
struct dpll *clock = &crtc_state->dpll;
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
dpll = DPLL_VGA_MODE_DIS;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
dpll |= (crtc_state->pixel_multiplier - 1)
<< SDVO_MULTIPLIER_SHIFT_HIRES;
}
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
dpll |= DPLL_SDVO_HIGH_SPEED;
if (intel_crtc_has_dp_encoder(crtc_state))
dpll |= DPLL_SDVO_HIGH_SPEED;
/* compute bitmask from p1 value */
if (IS_PINEVIEW(dev_priv))
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
else {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
if (IS_G4X(dev_priv) && reduced_clock)
dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
}
switch (clock->p2) {
case 5:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
break;
case 7:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
break;
case 10:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
break;
case 14:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
break;
}
if (INTEL_GEN(dev_priv) >= 4)
dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
if (crtc_state->sdvo_tv_clock)
dpll |= PLL_REF_INPUT_TVCLKINBC;
else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
dpll |= DPLL_VCO_ENABLE;
crtc_state->dpll_hw_state.dpll = dpll;
if (INTEL_GEN(dev_priv) >= 4) {
u32 dpll_md = (crtc_state->pixel_multiplier - 1)
<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
crtc_state->dpll_hw_state.dpll_md = dpll_md;
}
}
static void i8xx_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
*
* Enable the PLL for @pipe using the supplied @dpll config. To be used
* in cases where we need the PLL enabled even when @pipe is not going to
* be enabled.
*/
int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
const struct dpll *dpll)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u32 dpll;
struct dpll *clock = &crtc_state->dpll;
struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
struct intel_crtc_state *pipe_config;
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
pipe_config = intel_crtc_state_alloc(crtc);
if (!pipe_config)
return -ENOMEM;
dpll = DPLL_VGA_MODE_DIS;
pipe_config->cpu_transcoder = (enum transcoder)pipe;
pipe_config->pixel_multiplier = 1;
pipe_config->dpll = *dpll;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
if (IS_CHERRYVIEW(dev_priv)) {
chv_compute_dpll(crtc, pipe_config);
chv_prepare_pll(crtc, pipe_config);
chv_enable_pll(crtc, pipe_config);
} else {
if (clock->p1 == 2)
dpll |= PLL_P1_DIVIDE_BY_TWO;
else
dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
if (clock->p2 == 4)
dpll |= PLL_P2_DIVIDE_BY_4;
vlv_compute_dpll(crtc, pipe_config);
vlv_prepare_pll(crtc, pipe_config);
vlv_enable_pll(crtc, pipe_config);
}
/*
* Bspec:
* "[Almador Errata}: For the correct operation of the muxed DVO pins
* (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data,
* GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock
* Enable) must be set to “1” in both the DPLL A Control Register
* (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)."
kfree(pipe_config);
return 0;
}
/**
* vlv_force_pll_off - forcibly disable just the PLL
* @dev_priv: i915 private structure
* @pipe: pipe PLL to disable
*
* For simplicity We simply keep both bits always enabled in
* both DPLLS. The spec says we should disable the DVO 2X clock
* when not needed, but this seems to work fine in practice.
* Disable the PLL for @pipe. To be used in cases where we need
* the PLL enabled even when @pipe is not going to be enabled.
*/
if (IS_I830(dev_priv) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe)
{
if (IS_CHERRYVIEW(dev_priv))
chv_disable_pll(dev_priv, pipe);
else
dpll |= PLL_REF_INPUT_DREFCLK;
dpll |= DPLL_VCO_ENABLE;
crtc_state->dpll_hw_state.dpll = dpll;
vlv_disable_pll(dev_priv, pipe);
}
static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
......@@ -8691,207 +7740,6 @@ static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state)
intel_de_posting_read(dev_priv, PIPECONF(crtc->pipe));
}
static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
const struct intel_limit *limit;
int refclk = 48000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
limit = &intel_limits_i8xx_lvds;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
limit = &intel_limits_i8xx_dvo;
} else {
limit = &intel_limits_i8xx_dac;
}
if (!crtc_state->clock_set &&
!i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i8xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
const struct intel_limit *limit;
int refclk = 96000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
if (intel_is_dual_link_lvds(dev_priv))
limit = &intel_limits_g4x_dual_channel_lvds;
else
limit = &intel_limits_g4x_single_channel_lvds;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
limit = &intel_limits_g4x_hdmi;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
} else {
/* The option is for other outputs */
limit = &intel_limits_i9xx_sdvo;
}
if (!crtc_state->clock_set &&
!g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i9xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
const struct intel_limit *limit;
int refclk = 96000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
limit = &pnv_limits_lvds;
} else {
limit = &pnv_limits_sdvo;
}
if (!crtc_state->clock_set &&
!pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i9xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
const struct intel_limit *limit;
int refclk = 96000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
limit = &intel_limits_i9xx_lvds;
} else {
limit = &intel_limits_i9xx_sdvo;
}
if (!crtc_state->clock_set &&
!i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i9xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
static int chv_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_chv;
struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (!crtc_state->clock_set &&
!chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
chv_compute_dpll(crtc, crtc_state);
return 0;
}
static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_vlv;
struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (!crtc_state->clock_set &&
!vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
vlv_compute_dpll(crtc, crtc_state);
return 0;
}
static bool i9xx_has_pfit(struct drm_i915_private *dev_priv)
{
......@@ -9902,172 +8750,6 @@ int ilk_get_lanes_required(int target_clock, int link_bw, int bpp)
return DIV_ROUND_UP(bps, link_bw * 8);
}
static bool ilk_needs_fb_cb_tune(struct dpll *dpll, int factor)
{
return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
}
static void ilk_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 dpll, fp, fp2;
int factor;
/* Enable autotuning of the PLL clock (if permissible) */
factor = 21;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if ((intel_panel_use_ssc(dev_priv) &&
dev_priv->vbt.lvds_ssc_freq == 100000) ||
(HAS_PCH_IBX(dev_priv) &&
intel_is_dual_link_lvds(dev_priv)))
factor = 25;
} else if (crtc_state->sdvo_tv_clock) {
factor = 20;
}
fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
if (ilk_needs_fb_cb_tune(&crtc_state->dpll, factor))
fp |= FP_CB_TUNE;
if (reduced_clock) {
fp2 = i9xx_dpll_compute_fp(reduced_clock);
if (reduced_clock->m < factor * reduced_clock->n)
fp2 |= FP_CB_TUNE;
} else {
fp2 = fp;
}
dpll = 0;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
dpll |= (crtc_state->pixel_multiplier - 1)
<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
dpll |= DPLL_SDVO_HIGH_SPEED;
if (intel_crtc_has_dp_encoder(crtc_state))
dpll |= DPLL_SDVO_HIGH_SPEED;
/*
* The high speed IO clock is only really required for
* SDVO/HDMI/DP, but we also enable it for CRT to make it
* possible to share the DPLL between CRT and HDMI. Enabling
* the clock needlessly does no real harm, except use up a
* bit of power potentially.
*
* We'll limit this to IVB with 3 pipes, since it has only two
* DPLLs and so DPLL sharing is the only way to get three pipes
* driving PCH ports at the same time. On SNB we could do this,
* and potentially avoid enabling the second DPLL, but it's not
* clear if it''s a win or loss power wise. No point in doing
* this on ILK at all since it has a fixed DPLL<->pipe mapping.
*/
if (INTEL_NUM_PIPES(dev_priv) == 3 &&
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
dpll |= DPLL_SDVO_HIGH_SPEED;
/* compute bitmask from p1 value */
dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
/* also FPA1 */
dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
switch (crtc_state->dpll.p2) {
case 5:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
break;
case 7:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
break;
case 10:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
break;
case 14:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
break;
}
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
dpll |= DPLL_VCO_ENABLE;
crtc_state->dpll_hw_state.dpll = dpll;
crtc_state->dpll_hw_state.fp0 = fp;
crtc_state->dpll_hw_state.fp1 = fp2;
}
static int ilk_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_atomic_state *state =
to_intel_atomic_state(crtc_state->uapi.state);
const struct intel_limit *limit;
int refclk = 120000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
if (!crtc_state->has_pch_encoder)
return 0;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
dev_priv->vbt.lvds_ssc_freq);
refclk = dev_priv->vbt.lvds_ssc_freq;
}
if (intel_is_dual_link_lvds(dev_priv)) {
if (refclk == 100000)
limit = &ilk_limits_dual_lvds_100m;
else
limit = &ilk_limits_dual_lvds;
} else {
if (refclk == 100000)
limit = &ilk_limits_single_lvds_100m;
else
limit = &ilk_limits_single_lvds;
}
} else {
limit = &ilk_limits_dac;
}
if (!crtc_state->clock_set &&
!g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
ilk_compute_dpll(crtc, crtc_state, NULL);
if (!intel_reserve_shared_dplls(state, crtc, NULL)) {
drm_dbg_kms(&dev_priv->drm,
"failed to find PLL for pipe %c\n",
pipe_name(crtc->pipe));
return -EINVAL;
}
return 0;
}
static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
struct intel_link_m_n *m_n)
{
......@@ -10480,29 +9162,6 @@ static bool ilk_get_pipe_config(struct intel_crtc *crtc,
return ret;
}
static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_atomic_state *state =
to_intel_atomic_state(crtc_state->uapi.state);
if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
INTEL_GEN(dev_priv) >= 11) {
struct intel_encoder *encoder =
intel_get_crtc_new_encoder(state, crtc_state);
if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
drm_dbg_kms(&dev_priv->drm,
"failed to find PLL for pipe %c\n",
pipe_name(crtc->pipe));
return -EINVAL;
}
}
return 0;
}
static void dg1_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
struct intel_crtc_state *pipe_config)
{
......@@ -16435,69 +15094,27 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
{
intel_init_cdclk_hooks(dev_priv);
intel_dpll_init_clock_hook(dev_priv);
if (INTEL_GEN(dev_priv) >= 9) {
dev_priv->display.get_pipe_config = hsw_get_pipe_config;
dev_priv->display.get_initial_plane_config =
skl_get_initial_plane_config;
dev_priv->display.crtc_compute_clock = hsw_crtc_compute_clock;
dev_priv->display.crtc_enable = hsw_crtc_enable;
dev_priv->display.crtc_disable = hsw_crtc_disable;
} else if (HAS_DDI(dev_priv)) {
dev_priv->display.get_pipe_config = hsw_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock =
hsw_crtc_compute_clock;
dev_priv->display.crtc_enable = hsw_crtc_enable;
dev_priv->display.crtc_disable = hsw_crtc_disable;
} else if (HAS_PCH_SPLIT(dev_priv)) {
dev_priv->display.get_pipe_config = ilk_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock =
ilk_crtc_compute_clock;
dev_priv->display.crtc_enable = ilk_crtc_enable;
dev_priv->display.crtc_disable = ilk_crtc_disable;
} else if (IS_CHERRYVIEW(dev_priv)) {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
dev_priv->display.crtc_enable = valleyview_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
} else if (IS_VALLEYVIEW(dev_priv)) {
} else if (IS_CHERRYVIEW(dev_priv) ||
IS_VALLEYVIEW(dev_priv)) {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
dev_priv->display.crtc_enable = valleyview_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
} else if (IS_G4X(dev_priv)) {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
} else if (IS_PINEVIEW(dev_priv)) {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
} else if (!IS_GEN(dev_priv, 2)) {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
} else {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.get_initial_plane_config =
i9xx_get_initial_plane_config;
dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
dev_priv->display.crtc_enable = i9xx_crtc_enable;
dev_priv->display.crtc_disable = i9xx_crtc_disable;
}
......@@ -16511,10 +15128,13 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
}
if (INTEL_GEN(dev_priv) >= 9)
if (INTEL_GEN(dev_priv) >= 9) {
dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
else
dev_priv->display.get_initial_plane_config = skl_get_initial_plane_config;
} else {
dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
dev_priv->display.get_initial_plane_config = i9xx_get_initial_plane_config;
}
}
......
drivers/gpu/drm/i915/display/intel_display.h
View file @ 8cf41f31
......@@ -651,6 +651,9 @@ u32 intel_plane_compute_aligned_offset(int *x, int *y,
int color_plane);
int intel_plane_pin_fb(struct intel_plane_state *plane_state);
void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state);
struct intel_encoder *
intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
const struct intel_crtc_state *crtc_state);
/* modesetting */
void intel_modeset_init_hw(struct drm_i915_private *i915);
......
drivers/gpu/drm/i915/display/intel_display_types.h
View file @ 8cf41f31
......@@ -1839,4 +1839,17 @@ to_intel_frontbuffer(struct drm_framebuffer *fb)
return fb ? to_intel_framebuffer(fb)->frontbuffer : NULL;
}
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
if (dev_priv->params.panel_use_ssc >= 0)
return dev_priv->params.panel_use_ssc != 0;
return dev_priv->vbt.lvds_use_ssc
&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
static inline u32 i9xx_dpll_compute_fp(struct dpll *dpll)
{
return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
}
#endif /* __INTEL_DISPLAY_TYPES_H__ */
drivers/gpu/drm/i915/display/intel_dpll.c 0 → 100644
View file @ 8cf41f31
// SPDX-License-Identifier: MIT
/*
* Copyright © 2020 Intel Corporation
*/
#include <linux/kernel.h>
#include "intel_display_types.h"
#include "intel_display.h"
#include "intel_dpll.h"
#include "intel_lvds.h"
#include "intel_panel.h"
struct intel_limit {
struct {
int min, max;
} dot, vco, n, m, m1, m2, p, p1;
struct {
int dot_limit;
int p2_slow, p2_fast;
} p2;
};
static const struct intel_limit intel_limits_i8xx_dac = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 908000, .max = 1512000 },
.n = { .min = 2, .max = 16 },
.m = { .min = 96, .max = 140 },
.m1 = { .min = 18, .max = 26 },
.m2 = { .min = 6, .max = 16 },
.p = { .min = 4, .max = 128 },
.p1 = { .min = 2, .max = 33 },
.p2 = { .dot_limit = 165000,
.p2_slow = 4, .p2_fast = 2 },
};
static const struct intel_limit intel_limits_i8xx_dvo = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 908000, .max = 1512000 },
.n = { .min = 2, .max = 16 },
.m = { .min = 96, .max = 140 },
.m1 = { .min = 18, .max = 26 },
.m2 = { .min = 6, .max = 16 },
.p = { .min = 4, .max = 128 },
.p1 = { .min = 2, .max = 33 },
.p2 = { .dot_limit = 165000,
.p2_slow = 4, .p2_fast = 4 },
};
static const struct intel_limit intel_limits_i8xx_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 908000, .max = 1512000 },
.n = { .min = 2, .max = 16 },
.m = { .min = 96, .max = 140 },
.m1 = { .min = 18, .max = 26 },
.m2 = { .min = 6, .max = 16 },
.p = { .min = 4, .max = 128 },
.p1 = { .min = 1, .max = 6 },
.p2 = { .dot_limit = 165000,
.p2_slow = 14, .p2_fast = 7 },
};
static const struct intel_limit intel_limits_i9xx_sdvo = {
.dot = { .min = 20000, .max = 400000 },
.vco = { .min = 1400000, .max = 2800000 },
.n = { .min = 1, .max = 6 },
.m = { .min = 70, .max = 120 },
.m1 = { .min = 8, .max = 18 },
.m2 = { .min = 3, .max = 7 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit intel_limits_i9xx_lvds = {
.dot = { .min = 20000, .max = 400000 },
.vco = { .min = 1400000, .max = 2800000 },
.n = { .min = 1, .max = 6 },
.m = { .min = 70, .max = 120 },
.m1 = { .min = 8, .max = 18 },
.m2 = { .min = 3, .max = 7 },
.p = { .min = 7, .max = 98 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 7 },
};
static const struct intel_limit intel_limits_g4x_sdvo = {
.dot = { .min = 25000, .max = 270000 },
.vco = { .min = 1750000, .max = 3500000},
.n = { .min = 1, .max = 4 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 17, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 10, .max = 30 },
.p1 = { .min = 1, .max = 3},
.p2 = { .dot_limit = 270000,
.p2_slow = 10,
.p2_fast = 10
},
};
static const struct intel_limit intel_limits_g4x_hdmi = {
.dot = { .min = 22000, .max = 400000 },
.vco = { .min = 1750000, .max = 3500000},
.n = { .min = 1, .max = 4 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 16, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8},
.p2 = { .dot_limit = 165000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
.dot = { .min = 20000, .max = 115000 },
.vco = { .min = 1750000, .max = 3500000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 17, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 0,
.p2_slow = 14, .p2_fast = 14
},
};
static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
.dot = { .min = 80000, .max = 224000 },
.vco = { .min = 1750000, .max = 3500000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 104, .max = 138 },
.m1 = { .min = 17, .max = 23 },
.m2 = { .min = 5, .max = 11 },
.p = { .min = 14, .max = 42 },
.p1 = { .min = 2, .max = 6 },
.p2 = { .dot_limit = 0,
.p2_slow = 7, .p2_fast = 7
},
};
static const struct intel_limit pnv_limits_sdvo = {
.dot = { .min = 20000, .max = 400000},
.vco = { .min = 1700000, .max = 3500000 },
/* Pineview's Ncounter is a ring counter */
.n = { .min = 3, .max = 6 },
.m = { .min = 2, .max = 256 },
/* Pineview only has one combined m divider, which we treat as m2. */
.m1 = { .min = 0, .max = 0 },
.m2 = { .min = 0, .max = 254 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit pnv_limits_lvds = {
.dot = { .min = 20000, .max = 400000 },
.vco = { .min = 1700000, .max = 3500000 },
.n = { .min = 3, .max = 6 },
.m = { .min = 2, .max = 256 },
.m1 = { .min = 0, .max = 0 },
.m2 = { .min = 0, .max = 254 },
.p = { .min = 7, .max = 112 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 112000,
.p2_slow = 14, .p2_fast = 14 },
};
/* Ironlake / Sandybridge
*
* We calculate clock using (register_value + 2) for N/M1/M2, so here
* the range value for them is (actual_value - 2).
*/
static const struct intel_limit ilk_limits_dac = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 5 },
.m = { .min = 79, .max = 127 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 10, .p2_fast = 5 },
};
static const struct intel_limit ilk_limits_single_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 79, .max = 118 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 14, .p2_fast = 14 },
};
static const struct intel_limit ilk_limits_dual_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 79, .max = 127 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 14, .max = 56 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 7, .p2_fast = 7 },
};
/* LVDS 100mhz refclk limits. */
static const struct intel_limit ilk_limits_single_lvds_100m = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 2 },
.m = { .min = 79, .max = 126 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
.p2_slow = 14, .p2_fast = 14 },
};
static const struct intel_limit ilk_limits_dual_lvds_100m = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
.n = { .min = 1, .max = 3 },
.m = { .min = 79, .max = 126 },
.m1 = { .min = 12, .max = 22 },
.m2 = { .min = 5, .max = 9 },
.p = { .min = 14, .max = 42 },
.p1 = { .min = 2, .max = 6 },
.p2 = { .dot_limit = 225000,
.p2_slow = 7, .p2_fast = 7 },
};
static const struct intel_limit intel_limits_vlv = {
/*
* These are the data rate limits (measured in fast clocks)
* since those are the strictest limits we have. The fast
* clock and actual rate limits are more relaxed, so checking
* them would make no difference.
*/
.dot = { .min = 25000 * 5, .max = 270000 * 5 },
.vco = { .min = 4000000, .max = 6000000 },
.n = { .min = 1, .max = 7 },
.m1 = { .min = 2, .max = 3 },
.m2 = { .min = 11, .max = 156 },
.p1 = { .min = 2, .max = 3 },
.p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
};
static const struct intel_limit intel_limits_chv = {
/*
* These are the data rate limits (measured in fast clocks)
* since those are the strictest limits we have. The fast
* clock and actual rate limits are more relaxed, so checking
* them would make no difference.
*/
.dot = { .min = 25000 * 5, .max = 540000 * 5},
.vco = { .min = 4800000, .max = 6480000 },
.n = { .min = 1, .max = 1 },
.m1 = { .min = 2, .max = 2 },
.m2 = { .min = 24 << 22, .max = 175 << 22 },
.p1 = { .min = 2, .max = 4 },
.p2 = { .p2_slow = 1, .p2_fast = 14 },
};
static const struct intel_limit intel_limits_bxt = {
/* FIXME: find real dot limits */
.dot = { .min = 0, .max = INT_MAX },
.vco = { .min = 4800000, .max = 6700000 },
.n = { .min = 1, .max = 1 },
.m1 = { .min = 2, .max = 2 },
/* FIXME: find real m2 limits */
.m2 = { .min = 2 << 22, .max = 255 << 22 },
.p1 = { .min = 2, .max = 4 },
.p2 = { .p2_slow = 1, .p2_fast = 20 },
};
/*
* Platform specific helpers to calculate the port PLL loopback- (clock.m),
* and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
* (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
* The helpers' return value is the rate of the clock that is fed to the
* display engine's pipe which can be the above fast dot clock rate or a
* divided-down version of it.
*/
/* m1 is reserved as 0 in Pineview, n is a ring counter */
int pnv_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = clock->m2 + 2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot;
}
static u32 i9xx_dpll_compute_m(struct dpll *dpll)
{
return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
}
int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = i9xx_dpll_compute_m(clock);
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot;
}
int vlv_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = clock->m1 * clock->m2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot / 5;
}
int chv_calc_dpll_params(int refclk, struct dpll *clock)
{
clock->m = clock->m1 * clock->m2;
clock->p = clock->p1 * clock->p2;
if (WARN_ON(clock->n == 0 || clock->p == 0))
return 0;
clock->vco = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m),
clock->n << 22);
clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
return clock->dot / 5;
}
/*
* Returns whether the given set of divisors are valid for a given refclk with
* the given connectors.
*/
static bool intel_pll_is_valid(struct drm_i915_private *dev_priv,
const struct intel_limit *limit,
const struct dpll *clock)
{
if (clock->n < limit->n.min || limit->n.max < clock->n)
return false;
if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
return false;
if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
return false;
if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
return false;
if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
!IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
if (clock->m1 <= clock->m2)
return false;
if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
!IS_GEN9_LP(dev_priv)) {
if (clock->p < limit->p.min || limit->p.max < clock->p)
return false;
if (clock->m < limit->m.min || limit->m.max < clock->m)
return false;
}
if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
return false;
/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
* connector, etc., rather than just a single range.
*/
if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
return false;
return true;
}
static int
i9xx_select_p2_div(const struct intel_limit *limit,
const struct intel_crtc_state *crtc_state,
int target)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
* For LVDS just rely on its current settings for dual-channel.
* We haven't figured out how to reliably set up different
* single/dual channel state, if we even can.
*/
if (intel_is_dual_link_lvds(dev_priv))
return limit->p2.p2_fast;
else
return limit->p2.p2_slow;
} else {
if (target < limit->p2.dot_limit)
return limit->p2.p2_slow;
else
return limit->p2.p2_fast;
}
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*
* Target and reference clocks are specified in kHz.
*
* If match_clock is provided, then best_clock P divider must match the P
* divider from @match_clock used for LVDS downclocking.
*/
static bool
i9xx_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct drm_device *dev = crtc_state->uapi.crtc->dev;
struct dpll clock;
int err = target;
memset(best_clock, 0, sizeof(*best_clock));
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.m2 <= limit->m2.max; clock.m2++) {
if (clock.m2 >= clock.m1)
break;
for (clock.n = limit->n.min;
clock.n <= limit->n.max; clock.n++) {
for (clock.p1 = limit->p1.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
i9xx_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
if (match_clock &&
clock.p != match_clock->p)
continue;
this_err = abs(clock.dot - target);
if (this_err < err) {
*best_clock = clock;
err = this_err;
}
}
}
}
}
return (err != target);
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*
* Target and reference clocks are specified in kHz.
*
* If match_clock is provided, then best_clock P divider must match the P
* divider from @match_clock used for LVDS downclocking.
*/
static bool
pnv_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct drm_device *dev = crtc_state->uapi.crtc->dev;
struct dpll clock;
int err = target;
memset(best_clock, 0, sizeof(*best_clock));
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
clock.m1++) {
for (clock.m2 = limit->m2.min;
clock.m2 <= limit->m2.max; clock.m2++) {
for (clock.n = limit->n.min;
clock.n <= limit->n.max; clock.n++) {
for (clock.p1 = limit->p1.min;
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
pnv_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
if (match_clock &&
clock.p != match_clock->p)
continue;
this_err = abs(clock.dot - target);
if (this_err < err) {
*best_clock = clock;
err = this_err;
}
}
}
}
}
return (err != target);
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*
* Target and reference clocks are specified in kHz.
*
* If match_clock is provided, then best_clock P divider must match the P
* divider from @match_clock used for LVDS downclocking.
*/
static bool
g4x_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct drm_device *dev = crtc_state->uapi.crtc->dev;
struct dpll clock;
int max_n;
bool found = false;
/* approximately equals target * 0.00585 */
int err_most = (target >> 8) + (target >> 9);
memset(best_clock, 0, sizeof(*best_clock));
clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
max_n = limit->n.max;
/* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
/* based on hardware requirement, prefere larger m1,m2 */
for (clock.m1 = limit->m1.max;
clock.m1 >= limit->m1.min; clock.m1--) {
for (clock.m2 = limit->m2.max;
clock.m2 >= limit->m2.min; clock.m2--) {
for (clock.p1 = limit->p1.max;
clock.p1 >= limit->p1.min; clock.p1--) {
int this_err;
i9xx_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
this_err = abs(clock.dot - target);
if (this_err < err_most) {
*best_clock = clock;
err_most = this_err;
max_n = clock.n;
found = true;
}
}
}
}
}
return found;
}
/*
* Check if the calculated PLL configuration is more optimal compared to the
* best configuration and error found so far. Return the calculated error.
*/
static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
const struct dpll *calculated_clock,
const struct dpll *best_clock,
unsigned int best_error_ppm,
unsigned int *error_ppm)
{
/*
* For CHV ignore the error and consider only the P value.
* Prefer a bigger P value based on HW requirements.
*/
if (IS_CHERRYVIEW(to_i915(dev))) {
*error_ppm = 0;
return calculated_clock->p > best_clock->p;
}
if (drm_WARN_ON_ONCE(dev, !target_freq))
return false;
*error_ppm = div_u64(1000000ULL *
abs(target_freq - calculated_clock->dot),
target_freq);
/*
* Prefer a better P value over a better (smaller) error if the error
* is small. Ensure this preference for future configurations too by
* setting the error to 0.
*/
if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
*error_ppm = 0;
return true;
}
return *error_ppm + 10 < best_error_ppm;
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
static bool
vlv_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_device *dev = crtc->base.dev;
struct dpll clock;
unsigned int bestppm = 1000000;
/* min update 19.2 MHz */
int max_n = min(limit->n.max, refclk / 19200);
bool found = false;
target *= 5; /* fast clock */
memset(best_clock, 0, sizeof(*best_clock));
/* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
clock.p2 -= clock.p2 > 10 ? 2 : 1) {
clock.p = clock.p1 * clock.p2;
/* based on hardware requirement, prefer bigger m1,m2 values */
for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
unsigned int ppm;
clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
refclk * clock.m1);
vlv_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev),
limit,
&clock))
continue;
if (!vlv_PLL_is_optimal(dev, target,
&clock,
best_clock,
bestppm, &ppm))
continue;
*best_clock = clock;
bestppm = ppm;
found = true;
}
}
}
}
return found;
}
/*
* Returns a set of divisors for the desired target clock with the given
* refclk, or FALSE. The returned values represent the clock equation:
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
static bool
chv_find_best_dpll(const struct intel_limit *limit,
struct intel_crtc_state *crtc_state,
int target, int refclk, struct dpll *match_clock,
struct dpll *best_clock)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_device *dev = crtc->base.dev;
unsigned int best_error_ppm;
struct dpll clock;
u64 m2;
int found = false;
memset(best_clock, 0, sizeof(*best_clock));
best_error_ppm = 1000000;
/*
* Based on hardware doc, the n always set to 1, and m1 always
* set to 2. If requires to support 200Mhz refclk, we need to
* revisit this because n may not 1 anymore.
*/
clock.n = 1;
clock.m1 = 2;
target *= 5; /* fast clock */
for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
for (clock.p2 = limit->p2.p2_fast;
clock.p2 >= limit->p2.p2_slow;
clock.p2 -= clock.p2 > 10 ? 2 : 1) {
unsigned int error_ppm;
clock.p = clock.p1 * clock.p2;
m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22,
refclk * clock.m1);
if (m2 > INT_MAX/clock.m1)
continue;
clock.m2 = m2;
chv_calc_dpll_params(refclk, &clock);
if (!intel_pll_is_valid(to_i915(dev), limit, &clock))
continue;
if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
best_error_ppm, &error_ppm))
continue;
*best_clock = clock;
best_error_ppm = error_ppm;
found = true;
}
}
return found;
}
bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state,
struct dpll *best_clock)
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_bxt;
return chv_find_best_dpll(limit, crtc_state,
crtc_state->port_clock, refclk,
NULL, best_clock);
}
static u32 pnv_dpll_compute_fp(struct dpll *dpll)
{
return (1 << dpll->n) << 16 | dpll->m2;
}
static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 fp, fp2 = 0;
if (IS_PINEVIEW(dev_priv)) {
fp = pnv_dpll_compute_fp(&crtc_state->dpll);
if (reduced_clock)
fp2 = pnv_dpll_compute_fp(reduced_clock);
} else {
fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
if (reduced_clock)
fp2 = i9xx_dpll_compute_fp(reduced_clock);
}
crtc_state->dpll_hw_state.fp0 = fp;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
reduced_clock) {
crtc_state->dpll_hw_state.fp1 = fp2;
} else {
crtc_state->dpll_hw_state.fp1 = fp;
}
}
static void i9xx_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 dpll;
struct dpll *clock = &crtc_state->dpll;
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
dpll = DPLL_VGA_MODE_DIS;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
dpll |= (crtc_state->pixel_multiplier - 1)
<< SDVO_MULTIPLIER_SHIFT_HIRES;
}
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
dpll |= DPLL_SDVO_HIGH_SPEED;
if (intel_crtc_has_dp_encoder(crtc_state))
dpll |= DPLL_SDVO_HIGH_SPEED;
/* compute bitmask from p1 value */
if (IS_PINEVIEW(dev_priv))
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
else {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
if (IS_G4X(dev_priv) && reduced_clock)
dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
}
switch (clock->p2) {
case 5:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
break;
case 7:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
break;
case 10:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
break;
case 14:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
break;
}
if (INTEL_GEN(dev_priv) >= 4)
dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
if (crtc_state->sdvo_tv_clock)
dpll |= PLL_REF_INPUT_TVCLKINBC;
else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
dpll |= DPLL_VCO_ENABLE;
crtc_state->dpll_hw_state.dpll = dpll;
if (INTEL_GEN(dev_priv) >= 4) {
u32 dpll_md = (crtc_state->pixel_multiplier - 1)
<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
crtc_state->dpll_hw_state.dpll_md = dpll_md;
}
}
static void i8xx_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u32 dpll;
struct dpll *clock = &crtc_state->dpll;
i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
dpll = DPLL_VGA_MODE_DIS;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
} else {
if (clock->p1 == 2)
dpll |= PLL_P1_DIVIDE_BY_TWO;
else
dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
if (clock->p2 == 4)
dpll |= PLL_P2_DIVIDE_BY_4;
}
/*
* Bspec:
* "[Almador Errata}: For the correct operation of the muxed DVO pins
* (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data,
* GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock
* Enable) must be set to “1” in both the DPLL A Control Register
* (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)."
*
* For simplicity We simply keep both bits always enabled in
* both DPLLS. The spec says we should disable the DVO 2X clock
* when not needed, but this seems to work fine in practice.
*/
if (IS_I830(dev_priv) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
dpll |= DPLL_VCO_ENABLE;
crtc_state->dpll_hw_state.dpll = dpll;
}
static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_atomic_state *state =
to_intel_atomic_state(crtc_state->uapi.state);
if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
INTEL_GEN(dev_priv) >= 11) {
struct intel_encoder *encoder =
intel_get_crtc_new_encoder(state, crtc_state);
if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
drm_dbg_kms(&dev_priv->drm,
"failed to find PLL for pipe %c\n",
pipe_name(crtc->pipe));
return -EINVAL;
}
}
return 0;
}
static bool ilk_needs_fb_cb_tune(struct dpll *dpll, int factor)
{
return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
}
static void ilk_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 dpll, fp, fp2;
int factor;
/* Enable autotuning of the PLL clock (if permissible) */
factor = 21;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if ((intel_panel_use_ssc(dev_priv) &&
dev_priv->vbt.lvds_ssc_freq == 100000) ||
(HAS_PCH_IBX(dev_priv) &&
intel_is_dual_link_lvds(dev_priv)))
factor = 25;
} else if (crtc_state->sdvo_tv_clock) {
factor = 20;
}
fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
if (ilk_needs_fb_cb_tune(&crtc_state->dpll, factor))
fp |= FP_CB_TUNE;
if (reduced_clock) {
fp2 = i9xx_dpll_compute_fp(reduced_clock);
if (reduced_clock->m < factor * reduced_clock->n)
fp2 |= FP_CB_TUNE;
} else {
fp2 = fp;
}
dpll = 0;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
dpll |= (crtc_state->pixel_multiplier - 1)
<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
dpll |= DPLL_SDVO_HIGH_SPEED;
if (intel_crtc_has_dp_encoder(crtc_state))
dpll |= DPLL_SDVO_HIGH_SPEED;
/*
* The high speed IO clock is only really required for
* SDVO/HDMI/DP, but we also enable it for CRT to make it
* possible to share the DPLL between CRT and HDMI. Enabling
* the clock needlessly does no real harm, except use up a
* bit of power potentially.
*
* We'll limit this to IVB with 3 pipes, since it has only two
* DPLLs and so DPLL sharing is the only way to get three pipes
* driving PCH ports at the same time. On SNB we could do this,
* and potentially avoid enabling the second DPLL, but it's not
* clear if it''s a win or loss power wise. No point in doing
* this on ILK at all since it has a fixed DPLL<->pipe mapping.
*/
if (INTEL_NUM_PIPES(dev_priv) == 3 &&
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
dpll |= DPLL_SDVO_HIGH_SPEED;
/* compute bitmask from p1 value */
dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
/* also FPA1 */
dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
switch (crtc_state->dpll.p2) {
case 5:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
break;
case 7:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
break;
case 10:
dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
break;
case 14:
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
break;
}
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
intel_panel_use_ssc(dev_priv))
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
dpll |= DPLL_VCO_ENABLE;
crtc_state->dpll_hw_state.dpll = dpll;
crtc_state->dpll_hw_state.fp0 = fp;
crtc_state->dpll_hw_state.fp1 = fp2;
}
static int ilk_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_atomic_state *state =
to_intel_atomic_state(crtc_state->uapi.state);
const struct intel_limit *limit;
int refclk = 120000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
if (!crtc_state->has_pch_encoder)
return 0;
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
dev_priv->vbt.lvds_ssc_freq);
refclk = dev_priv->vbt.lvds_ssc_freq;
}
if (intel_is_dual_link_lvds(dev_priv)) {
if (refclk == 100000)
limit = &ilk_limits_dual_lvds_100m;
else
limit = &ilk_limits_dual_lvds;
} else {
if (refclk == 100000)
limit = &ilk_limits_single_lvds_100m;
else
limit = &ilk_limits_single_lvds;
}
} else {
limit = &ilk_limits_dac;
}
if (!crtc_state->clock_set &&
!g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
ilk_compute_dpll(crtc, crtc_state, NULL);
if (!intel_reserve_shared_dplls(state, crtc, NULL)) {
drm_dbg_kms(&dev_priv->drm,
"failed to find PLL for pipe %c\n",
pipe_name(crtc->pipe));
return -EINVAL;
}
return 0;
}
void vlv_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (crtc->pipe != PIPE_A)
pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
/* DPLL not used with DSI, but still need the rest set up */
if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
DPLL_EXT_BUFFER_ENABLE_VLV;
pipe_config->dpll_hw_state.dpll_md =
(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
void chv_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (crtc->pipe != PIPE_A)
pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
/* DPLL not used with DSI, but still need the rest set up */
if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
pipe_config->dpll_hw_state.dpll_md =
(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
static int chv_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_chv;
struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (!crtc_state->clock_set &&
!chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
chv_compute_dpll(crtc, crtc_state);
return 0;
}
static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
int refclk = 100000;
const struct intel_limit *limit = &intel_limits_vlv;
struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (!crtc_state->clock_set &&
!vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
vlv_compute_dpll(crtc, crtc_state);
return 0;
}
static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
const struct intel_limit *limit;
int refclk = 96000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
if (intel_is_dual_link_lvds(dev_priv))
limit = &intel_limits_g4x_dual_channel_lvds;
else
limit = &intel_limits_g4x_single_channel_lvds;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
limit = &intel_limits_g4x_hdmi;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
} else {
/* The option is for other outputs */
limit = &intel_limits_i9xx_sdvo;
}
if (!crtc_state->clock_set &&
!g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i9xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
const struct intel_limit *limit;
int refclk = 96000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
limit = &pnv_limits_lvds;
} else {
limit = &pnv_limits_sdvo;
}
if (!crtc_state->clock_set &&
!pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i9xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
const struct intel_limit *limit;
int refclk = 96000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
limit = &intel_limits_i9xx_lvds;
} else {
limit = &intel_limits_i9xx_sdvo;
}
if (!crtc_state->clock_set &&
!i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i9xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
const struct intel_limit *limit;
int refclk = 48000;
memset(&crtc_state->dpll_hw_state, 0,
sizeof(crtc_state->dpll_hw_state));
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if (intel_panel_use_ssc(dev_priv)) {
refclk = dev_priv->vbt.lvds_ssc_freq;
drm_dbg_kms(&dev_priv->drm,
"using SSC reference clock of %d kHz\n",
refclk);
}
limit = &intel_limits_i8xx_lvds;
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
limit = &intel_limits_i8xx_dvo;
} else {
limit = &intel_limits_i8xx_dac;
}
if (!crtc_state->clock_set &&
!i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
refclk, NULL, &crtc_state->dpll)) {
drm_err(&dev_priv->drm,
"Couldn't find PLL settings for mode!\n");
return -EINVAL;
}
i8xx_compute_dpll(crtc, crtc_state, NULL);
return 0;
}
void
intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 9 || HAS_DDI(dev_priv))
dev_priv->display.crtc_compute_clock = hsw_crtc_compute_clock;
else if (HAS_PCH_SPLIT(dev_priv))
dev_priv->display.crtc_compute_clock = ilk_crtc_compute_clock;
else if (IS_CHERRYVIEW(dev_priv))
dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
else if (IS_VALLEYVIEW(dev_priv))
dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
else if (IS_G4X(dev_priv))
dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
else if (IS_PINEVIEW(dev_priv))
dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
else if (!IS_GEN(dev_priv, 2))
dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
else
dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
}
drivers/gpu/drm/i915/display/intel_dpll.h 0 → 100644
View file @ 8cf41f31
/* SPDX-License-Identifier: MIT */
/*
* Copyright © 2020 Intel Corporation
*/
#ifndef _INTEL_DPLL_H_
#define _INTEL_DPLL_H_
struct dpll;
struct drm_i915_private;
struct intel_crtc;
struct intel_crtc_state;
void intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv);
int vlv_calc_dpll_params(int refclk, struct dpll *clock);
int pnv_calc_dpll_params(int refclk, struct dpll *clock);
int i9xx_calc_dpll_params(int refclk, struct dpll *clock);
void vlv_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
void chv_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7