Skip to content

L
linux
Commit 8d2d607c authored by Paul Cercueil's avatar Paul Cercueil Committed by Linus Walleij
Browse files
Options

pinctrl: ingenic: Garbage-collect code paths for SoCs disabled by config 

By being a bit smarter about how the SoC version checks are performed,
it is possible to have all the code paths that correspond to SoCs
disabled in the kernel config automatically marked as dead code by the
compiler, and therefore garbage-collected.

With this patch, when compiling a kernel that only targets the JZ4760
for instance, the driver is now about 4.5 KiB smaller.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220412162218.32509-1-paul@crapouillou.netSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent f01143f2
Show whitespace changes
Inline Side-by-side
Showing with 71 additions and 47 deletions
drivers/pinctrl/pinctrl-ingenic.c
View file @ 8d2d607c
......@@ -139,6 +139,30 @@ struct ingenic_gpio_chip {
unsigned int irq, reg_base;
};
static const unsigned long enabled_socs =
IS_ENABLED(CONFIG_MACH_JZ4730) << ID_JZ4730 |
IS_ENABLED(CONFIG_MACH_JZ4740) << ID_JZ4740 |
IS_ENABLED(CONFIG_MACH_JZ4725B) << ID_JZ4725B |
IS_ENABLED(CONFIG_MACH_JZ4750) << ID_JZ4750 |
IS_ENABLED(CONFIG_MACH_JZ4755) << ID_JZ4755 |
IS_ENABLED(CONFIG_MACH_JZ4760) << ID_JZ4760 |
IS_ENABLED(CONFIG_MACH_JZ4770) << ID_JZ4770 |
IS_ENABLED(CONFIG_MACH_JZ4775) << ID_JZ4775 |
IS_ENABLED(CONFIG_MACH_JZ4780) << ID_JZ4780 |
IS_ENABLED(CONFIG_MACH_X1000) << ID_X1000 |
IS_ENABLED(CONFIG_MACH_X1500) << ID_X1500 |
IS_ENABLED(CONFIG_MACH_X1830) << ID_X1830 |
IS_ENABLED(CONFIG_MACH_X2000) << ID_X2000 |
IS_ENABLED(CONFIG_MACH_X2100) << ID_X2100;
static bool
is_soc_or_above(const struct ingenic_pinctrl *jzpc, enum jz_version version)
{
return (enabled_socs >> version) &&
(!(enabled_socs & GENMASK(version - 1, 0))
|| jzpc->info->version >= version);
}
static const u32 jz4730_pull_ups[4] = {
0x3fa3320f, 0xf200ffff, 0xffffffff, 0xffffffff,
};
......@@ -3242,7 +3266,7 @@ static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
static void ingenic_gpio_set_bit(struct ingenic_gpio_chip *jzgc,
u8 reg, u8 offset, bool set)
{
if (jzgc->jzpc->info->version == ID_JZ4730) {
if (!is_soc_or_above(jzgc->jzpc, ID_JZ4740)) {
regmap_update_bits(jzgc->jzpc->map, jzgc->reg_base + reg,
BIT(offset), set ? BIT(offset) : 0);
return;
......@@ -3300,9 +3324,9 @@ static inline bool ingenic_gpio_get_value(struct ingenic_gpio_chip *jzgc,
static void ingenic_gpio_set_value(struct ingenic_gpio_chip *jzgc,
u8 offset, int value)
{
if (jzgc->jzpc->info->version >= ID_JZ4770)
if (is_soc_or_above(jzgc->jzpc, ID_JZ4770))
ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
else if (jzgc->jzpc->info->version >= ID_JZ4740)
else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
else
ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_DATA, offset, !!value);
......@@ -3337,10 +3361,10 @@ static void irq_set_type(struct ingenic_gpio_chip *jzgc,
break;
}
if (jzgc->jzpc->info->version >= ID_JZ4770) {
if (is_soc_or_above(jzgc->jzpc, ID_JZ4770)) {
reg1 = JZ4770_GPIO_PAT1;
reg2 = JZ4770_GPIO_PAT0;
} else if (jzgc->jzpc->info->version >= ID_JZ4740) {
} else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740)) {
reg1 = JZ4740_GPIO_TRIG;
reg2 = JZ4740_GPIO_DIR;
} else {
......@@ -3350,12 +3374,12 @@ static void irq_set_type(struct ingenic_gpio_chip *jzgc,
return;
}
if (jzgc->jzpc->info->version >= ID_X2000) {
if (is_soc_or_above(jzgc->jzpc, ID_X2000)) {
ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, val1);
ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, val2);
ingenic_gpio_shadow_set_bit_load(jzgc);
ingenic_gpio_set_bit(jzgc, X2000_GPIO_EDG, offset, val3);
} else if (jzgc->jzpc->info->version >= ID_X1000) {
} else if (is_soc_or_above(jzgc->jzpc, ID_X1000)) {
ingenic_gpio_shadow_set_bit(jzgc, reg2, offset, val1);
ingenic_gpio_shadow_set_bit(jzgc, reg1, offset, val2);
ingenic_gpio_shadow_set_bit_load(jzgc);
......@@ -3371,7 +3395,7 @@ static void ingenic_gpio_irq_mask(struct irq_data *irqd)
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
int irq = irqd->hwirq;
if (jzgc->jzpc->info->version >= ID_JZ4740)
if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, true);
else
ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIMR, irq, true);
......@@ -3383,7 +3407,7 @@ static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
int irq = irqd->hwirq;
if (jzgc->jzpc->info->version >= ID_JZ4740)
if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, GPIO_MSK, irq, false);
else
ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIMR, irq, false);
......@@ -3395,9 +3419,9 @@ static void ingenic_gpio_irq_enable(struct irq_data *irqd)
struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
int irq = irqd->hwirq;
if (jzgc->jzpc->info->version >= ID_JZ4770)
if (is_soc_or_above(jzgc->jzpc, ID_JZ4770))
ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
else if (jzgc->jzpc->info->version >= ID_JZ4740)
else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
else
ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIER, irq, true);
......@@ -3413,9 +3437,9 @@ static void ingenic_gpio_irq_disable(struct irq_data *irqd)
ingenic_gpio_irq_mask(irqd);
if (jzgc->jzpc->info->version >= ID_JZ4770)
if (is_soc_or_above(jzgc->jzpc, ID_JZ4770))
ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
else if (jzgc->jzpc->info->version >= ID_JZ4740)
else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
else
ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPIER, irq, false);
......@@ -3429,7 +3453,7 @@ static void ingenic_gpio_irq_ack(struct irq_data *irqd)
bool high;
if ((irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) &&
(jzgc->jzpc->info->version < ID_X2000)) {
!is_soc_or_above(jzgc->jzpc, ID_X2000)) {
/*
* Switch to an interrupt for the opposite edge to the one that
* triggered the interrupt being ACKed.
......@@ -3441,9 +3465,9 @@ static void ingenic_gpio_irq_ack(struct irq_data *irqd)
irq_set_type(jzgc, irq, IRQ_TYPE_LEVEL_HIGH);
}
if (jzgc->jzpc->info->version >= ID_JZ4770)
if (is_soc_or_above(jzgc->jzpc, ID_JZ4770))
ingenic_gpio_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
else if (jzgc->jzpc->info->version >= ID_JZ4740)
else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
ingenic_gpio_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
else
ingenic_gpio_set_bit(jzgc, JZ4730_GPIO_GPFR, irq, false);
......@@ -3468,7 +3492,7 @@ static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
irq_set_handler_locked(irqd, handle_bad_irq);
}
if ((type == IRQ_TYPE_EDGE_BOTH) && (jzgc->jzpc->info->version < ID_X2000)) {
if ((type == IRQ_TYPE_EDGE_BOTH) && !is_soc_or_above(jzgc->jzpc, ID_X2000)) {
/*
* The hardware does not support interrupts on both edges. The
* best we can do is to set up a single-edge interrupt and then
......@@ -3500,9 +3524,9 @@ static void ingenic_gpio_irq_handler(struct irq_desc *desc)
chained_irq_enter(irq_chip, desc);
if (jzgc->jzpc->info->version >= ID_JZ4770)
if (is_soc_or_above(jzgc->jzpc, ID_JZ4770))
flag = ingenic_gpio_read_reg(jzgc, JZ4770_GPIO_FLAG);
else if (jzgc->jzpc->info->version >= ID_JZ4740)
else if (is_soc_or_above(jzgc->jzpc, ID_JZ4740))
flag = ingenic_gpio_read_reg(jzgc, JZ4740_GPIO_FLAG);
else
flag = ingenic_gpio_read_reg(jzgc, JZ4730_GPIO_GPFR);
......@@ -3547,14 +3571,14 @@ static inline void ingenic_config_pin(struct ingenic_pinctrl *jzpc,
unsigned int offt = pin / PINS_PER_GPIO_CHIP;
if (set) {
if (jzpc->info->version >= ID_JZ4740)
if (is_soc_or_above(jzpc, ID_JZ4740))
regmap_write(jzpc->map, offt * jzpc->info->reg_offset +
REG_SET(reg), BIT(idx));
else
regmap_set_bits(jzpc->map, offt * jzpc->info->reg_offset +
reg, BIT(idx));
} else {
if (jzpc->info->version >= ID_JZ4740)
if (is_soc_or_above(jzpc, ID_JZ4740))
regmap_write(jzpc->map, offt * jzpc->info->reg_offset +
REG_CLEAR(reg), BIT(idx));
else
......@@ -3613,12 +3637,12 @@ static int ingenic_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
struct ingenic_pinctrl *jzpc = jzgc->jzpc;
unsigned int pin = gc->base + offset;
if (jzpc->info->version >= ID_JZ4770) {
if (is_soc_or_above(jzpc, ID_JZ4770)) {
if (ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_INT) ||
ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PAT1))
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
} else if (jzpc->info->version == ID_JZ4730) {
} else if (!is_soc_or_above(jzpc, ID_JZ4740)) {
if (!ingenic_get_pin_config(jzpc, pin, JZ4730_GPIO_GPDIR))
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
......@@ -3669,18 +3693,18 @@ static int ingenic_pinmux_set_pin_fn(struct ingenic_pinctrl *jzpc,
dev_dbg(jzpc->dev, "set pin P%c%u to function %u\n",
'A' + offt, idx, func);
if (jzpc->info->version >= ID_X1000) {
if (is_soc_or_above(jzpc, ID_X1000)) {
ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_shadow_config_pin(jzpc, pin, GPIO_MSK, false);
ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
ingenic_shadow_config_pin_load(jzpc, pin);
} else if (jzpc->info->version >= ID_JZ4770) {
} else if (is_soc_or_above(jzpc, ID_JZ4770)) {
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_config_pin(jzpc, pin, GPIO_MSK, false);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, func & 0x2);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, func & 0x1);
} else if (jzpc->info->version >= ID_JZ4740) {
} else if (is_soc_or_above(jzpc, ID_JZ4740)) {
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, true);
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_TRIG, func & 0x2);
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, func & 0x1);
......@@ -3738,16 +3762,16 @@ static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
dev_dbg(pctldev->dev, "set pin P%c%u to %sput\n",
'A' + offt, idx, input ? "in" : "out");
if (jzpc->info->version >= ID_X1000) {
if (is_soc_or_above(jzpc, ID_X1000)) {
ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_shadow_config_pin(jzpc, pin, GPIO_MSK, true);
ingenic_shadow_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
ingenic_shadow_config_pin_load(jzpc, pin);
} else if (jzpc->info->version >= ID_JZ4770) {
} else if (is_soc_or_above(jzpc, ID_JZ4770)) {
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_INT, false);
ingenic_config_pin(jzpc, pin, GPIO_MSK, true);
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input);
} else if (jzpc->info->version >= ID_JZ4740) {
} else if (is_soc_or_above(jzpc, ID_JZ4740)) {
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false);
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, !input);
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false);
......@@ -3779,7 +3803,7 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
unsigned int bias, reg;
bool pull, pullup, pulldown;
if (jzpc->info->version >= ID_X2000) {
if (is_soc_or_above(jzpc, ID_X2000)) {
pullup = ingenic_get_pin_config(jzpc, pin, X2000_GPIO_PEPU) &&
!ingenic_get_pin_config(jzpc, pin, X2000_GPIO_PEPD) &&
(jzpc->info->pull_ups[offt] & BIT(idx));
......@@ -3787,7 +3811,7 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
!ingenic_get_pin_config(jzpc, pin, X2000_GPIO_PEPU) &&
(jzpc->info->pull_downs[offt] & BIT(idx));
} else if (jzpc->info->version >= ID_X1830) {
} else if (is_soc_or_above(jzpc, ID_X1830)) {
unsigned int half = PINS_PER_GPIO_CHIP / 2;
unsigned int idxh = (pin % half) * 2;
......@@ -3804,9 +3828,9 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
pulldown = (bias == GPIO_PULL_DOWN) && (jzpc->info->pull_downs[offt] & BIT(idx));
} else {
if (jzpc->info->version >= ID_JZ4770)
if (is_soc_or_above(jzpc, ID_JZ4770))
pull = !ingenic_get_pin_config(jzpc, pin, JZ4770_GPIO_PEN);
else if (jzpc->info->version >= ID_JZ4740)
else if (is_soc_or_above(jzpc, ID_JZ4740))
pull = !ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_PULL_DIS);
else
pull = ingenic_get_pin_config(jzpc, pin, JZ4730_GPIO_GPPUR);
......@@ -3835,9 +3859,9 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if (jzpc->info->version >= ID_X2000)
if (is_soc_or_above(jzpc, ID_X2000))
reg = X2000_GPIO_SMT;
else if (jzpc->info->version >= ID_X1830)
else if (is_soc_or_above(jzpc, ID_X1830))
reg = X1830_GPIO_SMT;
else
return -EINVAL;
......@@ -3846,9 +3870,9 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
break;
case PIN_CONFIG_SLEW_RATE:
if (jzpc->info->version >= ID_X2000)
if (is_soc_or_above(jzpc, ID_X2000))
reg = X2000_GPIO_SR;
else if (jzpc->info->version >= ID_X1830)
else if (is_soc_or_above(jzpc, ID_X1830))
reg = X1830_GPIO_SR;
else
return -EINVAL;
......@@ -3867,7 +3891,7 @@ static int ingenic_pinconf_get(struct pinctrl_dev *pctldev,
static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
unsigned int pin, unsigned int bias)
{
if (jzpc->info->version >= ID_X2000) {
if (is_soc_or_above(jzpc, ID_X2000)) {
switch (bias) {
case GPIO_PULL_UP:
ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false);
......@@ -3885,7 +3909,7 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false);
}
} else if (jzpc->info->version >= ID_X1830) {
} else if (is_soc_or_above(jzpc, ID_X1830)) {
unsigned int idx = pin % PINS_PER_GPIO_CHIP;
unsigned int half = PINS_PER_GPIO_CHIP / 2;
unsigned int idxh = (pin % half) * 2;
......@@ -3903,9 +3927,9 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
REG_SET(X1830_GPIO_PEH), bias << idxh);
}
} else if (jzpc->info->version >= ID_JZ4770) {
} else if (is_soc_or_above(jzpc, ID_JZ4770)) {
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PEN, !bias);
} else if (jzpc->info->version >= ID_JZ4740) {
} else if (is_soc_or_above(jzpc, ID_JZ4740)) {
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_PULL_DIS, !bias);
} else {
ingenic_config_pin(jzpc, pin, JZ4730_GPIO_GPPUR, bias);
......@@ -3915,7 +3939,7 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc,
static void ingenic_set_schmitt_trigger(struct ingenic_pinctrl *jzpc,
unsigned int pin, bool enable)
{
if (jzpc->info->version >= ID_X2000)
if (is_soc_or_above(jzpc, ID_X2000))
ingenic_config_pin(jzpc, pin, X2000_GPIO_SMT, enable);
else
ingenic_config_pin(jzpc, pin, X1830_GPIO_SMT, enable);
......@@ -3924,9 +3948,9 @@ static void ingenic_set_schmitt_trigger(struct ingenic_pinctrl *jzpc,
static void ingenic_set_output_level(struct ingenic_pinctrl *jzpc,
unsigned int pin, bool high)
{
if (jzpc->info->version >= ID_JZ4770)
if (is_soc_or_above(jzpc, ID_JZ4770))
ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT0, high);
else if (jzpc->info->version >= ID_JZ4740)
else if (is_soc_or_above(jzpc, ID_JZ4740))
ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DATA, high);
else
ingenic_config_pin(jzpc, pin, JZ4730_GPIO_DATA, high);
......@@ -3935,7 +3959,7 @@ static void ingenic_set_output_level(struct ingenic_pinctrl *jzpc,
static void ingenic_set_slew_rate(struct ingenic_pinctrl *jzpc,
unsigned int pin, unsigned int slew)
{
if (jzpc->info->version >= ID_X2000)
if (is_soc_or_above(jzpc, ID_X2000))
ingenic_config_pin(jzpc, pin, X2000_GPIO_SR, slew);
else
ingenic_config_pin(jzpc, pin, X1830_GPIO_SR, slew);
......@@ -3991,7 +4015,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if (jzpc->info->version < ID_X1830)
if (!is_soc_or_above(jzpc, ID_X1830))
return -EINVAL;
ingenic_set_schmitt_trigger(jzpc, pin, arg);
......@@ -4006,7 +4030,7 @@ static int ingenic_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
break;
case PIN_CONFIG_SLEW_RATE:
if (jzpc->info->version < ID_X1830)
if (!is_soc_or_above(jzpc, ID_X1830))
return -EINVAL;
ingenic_set_slew_rate(jzpc, pin, arg);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7