arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings

Update the INTA and INTR dt nodes to the latest DT bindings.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200806074826.24607-12-lokeshvutla@ti.com

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts

@@ -287,7 +287,7 @@ &wkup_gpio1 {
 };
 
 &mailbox0_cluster0 {
-	interrupts = <214 0>;
+	interrupts = <436>;
 
 	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
 		ti,mbox-rx = <0 0 0>;
@@ -301,7 +301,7 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
 };
 
 &mailbox0_cluster1 {
-	interrupts = <215 0>;
+	interrupts = <432>;
 
 	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
 		ti,mbox-rx = <0 0 0>;
@@ -315,7 +315,7 @@ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
 };
 
 &mailbox0_cluster2 {
-	interrupts = <216 0>;
+	interrupts = <428>;
 
 	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
 		ti,mbox-rx = <0 0 0>;
@@ -329,7 +329,7 @@ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
 };
 
 &mailbox0_cluster3 {
-	interrupts = <217 0>;
+	interrupts = <424>;
 
 	mbox_c66_0: mbox-c66-0 {
 		ti,mbox-rx = <0 0 0>;
@@ -343,7 +343,7 @@ mbox_c66_1: mbox-c66-1 {
 };
 
 &mailbox0_cluster4 {
-	interrupts = <218 0>;
+	interrupts = <420>;
 
 	mbox_c71_0: mbox-c71-0 {
 		ti,mbox-rx = <0 0 0>;

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi

@@ -80,10 +80,10 @@ main_gpio_intr: interrupt-controller0 {
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
-		#interrupt-cells = <2>;
+		#interrupt-cells = <1>;
 		ti,sci = <&dmsc>;
-		ti,sci-dst-id = <14>;
-		ti,sci-rm-range-girq = <0x1>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
 	};
 
 	main_navss {
@@ -101,10 +101,12 @@ main_navss_intr: interrupt-controller1 {
 			ti,intr-trigger-type = <4>;
 			interrupt-controller;
 			interrupt-parent = <&gic500>;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <1>;
 			ti,sci = <&dmsc>;
-			ti,sci-dst-id = <14>;
-			ti,sci-rm-range-girq = <0>, <2>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
 		};
 
 		main_udmass_inta: interrupt-controller@33d00000 {
@@ -115,8 +117,7 @@ main_udmass_inta: interrupt-controller@33d00000 {
 			msi-controller;
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <209>;
-			ti,sci-rm-range-vint = <0xa>;
-			ti,sci-rm-range-global-event = <0xd>;
+			ti,interrupt-ranges = <0 0 256>;
 		};
 
 		secure_proxy_main: mailbox@32c00000 {
@@ -296,7 +297,7 @@ cpts@310d0000 {
 			reg-names = "cpts";
 			clocks = <&k3_clks 201 1>;
 			clock-names = "cpts";
-			interrupts-extended = <&main_navss_intr 201 0>;
+			interrupts-extended = <&main_navss_intr 391>;
 			interrupt-names = "cpts";
 			ti,cpts-periodic-outputs = <6>;
 			ti,cpts-ext-ts-inputs = <8>;
@@ -688,8 +689,8 @@ main_gpio0: gpio@600000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <105 0>, <105 1>, <105 2>, <105 3>,
-			     <105 4>, <105 5>, <105 6>, <105 7>;
+		interrupts = <256>, <257>, <258>, <259>,
+			     <260>, <261>, <262>, <263>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <128>;
@@ -705,7 +706,7 @@ main_gpio1: gpio@601000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <106 0>, <106 1>, <106 2>;
+		interrupts = <288>, <289>, <290>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <36>;
@@ -721,8 +722,8 @@ main_gpio2: gpio@610000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <107 0>, <107 1>, <107 2>, <107 3>,
-			     <107 4>, <107 5>, <107 6>, <107 7>;
+		interrupts = <264>, <265>, <266>, <267>,
+			     <268>, <269>, <270>, <271>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <128>;
@@ -738,7 +739,7 @@ main_gpio3: gpio@611000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <108 0>, <108 1>, <108 2>;
+		interrupts = <292>, <293>, <294>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <36>;
@@ -754,8 +755,8 @@ main_gpio4: gpio@620000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <109 0>, <109 1>, <109 2>, <109 3>,
-			     <109 4>, <109 5>, <109 6>, <109 7>;
+		interrupts = <272>, <273>, <274>, <275>,
+			     <276>, <277>, <278>, <279>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <128>;
@@ -771,7 +772,7 @@ main_gpio5: gpio@621000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <110 0>, <110 1>, <110 2>;
+		interrupts = <296>, <297>, <298>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <36>;
@@ -787,8 +788,8 @@ main_gpio6: gpio@630000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <111 0>, <111 1>, <111 2>, <111 3>,
-			     <111 4>, <111 5>, <111 6>, <111 7>;
+		interrupts = <280>, <281>, <282>, <283>,
+			     <284>, <285>, <286>, <287>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <128>;
@@ -804,7 +805,7 @@ main_gpio7: gpio@631000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
-		interrupts = <112 0>, <112 1>, <112 2>;
+		interrupts = <300>, <301>, <302>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <36>;

arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi

@@ -101,9 +101,10 @@ wkup_gpio_intr: interrupt-controller2 {
 		ti,intr-trigger-type = <1>;
 		interrupt-controller;
 		interrupt-parent = <&gic500>;
-		#interrupt-cells = <2>;
+		#interrupt-cells = <1>;
 		ti,sci = <&dmsc>;
-		ti,sci-dst-id = <14>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
 		ti,sci-rm-range-girq = <0x5>;
 	};
 
@@ -113,8 +114,7 @@ wkup_gpio0: gpio@42110000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&wkup_gpio_intr>;
-		interrupts = <113 0>, <113 1>, <113 2>,
-			     <113 3>, <113 4>, <113 5>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <84>;
@@ -130,8 +130,7 @@ wkup_gpio1: gpio@42100000 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&wkup_gpio_intr>;
-		interrupts = <114 0>, <114 1>, <114 2>,
-			     <114 3>, <114 4>, <114 5>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,ngpio = <84>;