OMAPFB: Remove OMAP2/3 support from old omapfb driver

Old omapfb driver (drivers/video/omap/) is no longer used for OMAP2+
devices, and thus we can remove OMAP2+ support from it and make it an
OMAP1 omapfb driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/omap/Kconfig

 config FB_OMAP
 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
-	depends on FB && (OMAP2_DSS = "n")
-	depends on ARCH_OMAP1 || ARCH_OMAP2 || ARCH_OMAP3
+	depends on FB
+	depends on ARCH_OMAP1
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select TWL4030_CORE if MACH_OMAP_2430SDP
 	help
           Frame buffer driver for OMAP based boards.
 
@@ -42,7 +41,7 @@ config FB_OMAP_LCD_MIPID
 
 config FB_OMAP_BOOTLOADER_INIT
 	bool "Check bootloader initialization"
-	depends on FB_OMAP || FB_OMAP2
+	depends on FB_OMAP
 	help
 	  Say Y here if you want to enable checking if the bootloader has
 	  already initialized the display controller. In this case the
@@ -61,7 +60,7 @@ config FB_OMAP_CONSISTENT_DMA_SIZE
 
 config FB_OMAP_DMA_TUNE
         bool "Set DMA SDRAM access priority high"
-        depends on FB_OMAP && ARCH_OMAP1
+        depends on FB_OMAP
         help
           On systems in which video memory is in system memory
           (SDRAM) this will speed up graphics DMA operations.

drivers/video/omap/Makefile

 #
-# Makefile for the new OMAP framebuffer device driver
+# Makefile for the OMAP1 framebuffer device driver
 #
 
 obj-$(CONFIG_FB_OMAP) += omapfb.o
@@ -7,11 +7,8 @@ obj-$(CONFIG_FB_OMAP) += omapfb.o
 objs-yy := omapfb_main.o
 
 objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
-objs-y$(CONFIG_ARCH_OMAP2) += dispc.o
-objs-y$(CONFIG_ARCH_OMAP3) += dispc.o
 
 objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
-objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += rfbi.o
 
 objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
 

drivers/video/omap/dispc.h

-#ifndef _DISPC_H
-#define _DISPC_H
-
-#include <linux/interrupt.h>
-
-#define DISPC_PLANE_GFX			0
-#define DISPC_PLANE_VID1		1
-#define DISPC_PLANE_VID2		2
-
-#define DISPC_RGB_1_BPP			0x00
-#define DISPC_RGB_2_BPP			0x01
-#define DISPC_RGB_4_BPP			0x02
-#define DISPC_RGB_8_BPP			0x03
-#define DISPC_RGB_12_BPP		0x04
-#define DISPC_RGB_16_BPP		0x06
-#define DISPC_RGB_24_BPP		0x08
-#define DISPC_RGB_24_BPP_UNPACK_32	0x09
-#define DISPC_YUV2_422			0x0a
-#define DISPC_UYVY_422			0x0b
-
-#define DISPC_BURST_4x32		0
-#define DISPC_BURST_8x32		1
-#define DISPC_BURST_16x32		2
-
-#define DISPC_LOAD_CLUT_AND_FRAME	0x00
-#define DISPC_LOAD_CLUT_ONLY		0x01
-#define DISPC_LOAD_FRAME_ONLY		0x02
-#define DISPC_LOAD_CLUT_ONCE_FRAME	0x03
-
-#define DISPC_TFT_DATA_LINES_12		0
-#define DISPC_TFT_DATA_LINES_16		1
-#define DISPC_TFT_DATA_LINES_18		2
-#define DISPC_TFT_DATA_LINES_24		3
-
-extern void omap_dispc_set_lcd_size(int width, int height);
-
-extern void omap_dispc_enable_lcd_out(int enable);
-extern void omap_dispc_enable_digit_out(int enable);
-
-extern int omap_dispc_request_irq(unsigned long irq_mask,
-				   void (*callback)(void *data), void *data);
-extern void omap_dispc_free_irq(unsigned long irq_mask,
-				 void (*callback)(void *data), void *data);
-
-extern const struct lcd_ctrl omap2_int_ctrl;
-#endif

drivers/video/omap/omapfb.h

@@ -207,11 +207,7 @@ struct omapfb_device {
 	struct platform_device	*dssdev;	/* dummy dev for clocks */
 };
 
-#ifdef CONFIG_ARCH_OMAP1
 extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
 
 extern void omapfb_register_panel(struct lcd_panel *panel);
 extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);

drivers/video/omap/omapfb_main.c

@@ -34,7 +34,6 @@
 
 #include "omapfb.h"
 #include "lcdc.h"
-#include "dispc.h"
 
 #define MODULE_NAME	"omapfb"
 
@@ -106,11 +105,7 @@ static struct platform_device omapdss_device = {
 extern struct lcd_ctrl hwa742_ctrl;
 
 static const struct lcd_ctrl *ctrls[] = {
-#ifdef CONFIG_ARCH_OMAP1
 	&omap1_int_ctrl,
-#else
-	&omap2_int_ctrl,
-#endif
 
 #ifdef CONFIG_FB_OMAP_LCDC_HWA742
 	&hwa742_ctrl,
@@ -118,11 +113,7 @@ static const struct lcd_ctrl *ctrls[] = {
 };
 
 #ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-#ifdef CONFIG_ARCH_OMAP1
 extern struct lcd_ctrl_extif omap1_ext_if;
-#else
-extern struct lcd_ctrl_extif omap2_ext_if;
-#endif
 #endif
 
 static void omapfb_rqueue_lock(struct omapfb_device *fbdev)
@@ -1717,16 +1708,9 @@ static int omapfb_do_probe(struct platform_device *pdev,
 
 	mutex_init(&fbdev->rqueue_mutex);
 
-#ifdef CONFIG_ARCH_OMAP1
 	fbdev->int_ctrl = &omap1_int_ctrl;
 #ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
 	fbdev->ext_if = &omap1_ext_if;
-#endif
-#else	/* OMAP2 */
-	fbdev->int_ctrl = &omap2_int_ctrl;
-#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-	fbdev->ext_if = &omap2_ext_if;
-#endif
 #endif
 	if (omapfb_find_ctrl(fbdev) < 0) {
 		dev_err(fbdev->dev,