Merge tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.4-rc1.  Lots of
  different driver and subsystem updates, hwtracing being the largest
  with the addition of some new platforms that are now supported.  Full
  details in the shortlog.

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits)
  fpga: socfpga: Fix check of return value of devm_request_irq
  lkdtm: fix ACCESS_USERSPACE test
  mcb: Destroy IDA on module unload
  mcb: Do not return zero on error path in mcb_pci_probe()
  mei: bus: set the device name before running fixup
  mei: bus: use correct lock ordering
  mei: Fix debugfs filename in error output
  char: ipmi: ipmi_ssif: Replace timeval with timespec64
  fpga: zynq-fpga: Fix issue with drvdata being overwritten.
  fpga manager: remove unnecessary null pointer checks
  fpga manager: ensure lifetime with of_fpga_mgr_get
  fpga: zynq-fpga: Change fw format to handle bin instead of bit.
  fpga: zynq-fpga: Fix unbalanced clock handling
  misc: sram: partition base address belongs to __iomem space
  coresight: etm3x: adding documentation for sysFS's cpu interface
  vme: 8-bit status/id takes 256 values, not 255
  fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000
  ARM: zynq: dt: Updated devicetree for Zynq 7000 platform.
  ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.
  ver_linux: proc/modules, limit text processing to 'sed'
  ...

Documentation/ABI/testing/configfs-stp-policy

+What:		/config/stp-policy
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		This group contains policies mandating Master/Channel allocation
+		for software sources wishing to send trace data over an STM
+		device.
+
+What:		/config/stp-policy/<device>.<policy>
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		This group is the root of a policy; its name is a concatenation
+		of an stm device name to which this policy applies and an
+		arbitrary string. If <device> part doesn't match an existing
+		stm device, mkdir will fail with ENODEV; if that device already
+		has a policy assigned to it, mkdir will fail with EBUSY.
+
+What:		/config/stp-policy/<device>.<policy>/device
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		STM device to which this policy applies, read only. Same as the
+		<device> component of its parent directory.
+
+What:		/config/stp-policy/<device>.<policy>/<node>
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		Policy node is a string identifier that software clients will
+		use to request a master/channel to be allocated and assigned to
+		them.
+
+What:		/config/stp-policy/<device>.<policy>/<node>/masters
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		Range of masters from which to allocate for users of this node.
+		Write two numbers: the first master and the last master number.
+
+What:		/config/stp-policy/<device>.<policy>/<node>/channels
+Date:		June 2015
+KernelVersion:	4.3
+Description:
+		Range of channels from which to allocate for users of this node.
+		Write two numbers: the first channel and the last channel
+		number.
+

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x

@@ -8,13 +8,6 @@ Description:	(RW) Enable/disable tracing on this specific trace entiry.
 		of coresight components linking the source to the sink is
 		configured and managed automatically by the coresight framework.
 
-What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/status
-Date:		November 2014
-KernelVersion:	3.19
-Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description:	(R) List various control and status registers.  The specific
-		layout and content is driver specific.
-
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/addr_idx
 Date:		November 2014
 KernelVersion:	3.19
@@ -251,3 +244,79 @@ Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Define the event that controls the trigger.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/cpu
+Date:		October 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description:	(RO) Holds the cpu number this tracer is affined to.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Configuration Code register
+		(0x004).  The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmccer
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Configuration Code Extension
+		register (0x1e8).  The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmscr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM System Configuration
+		register (0x014).  The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmidr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM ID register (0x1e4).  The
+		value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmcr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Main Control register (0x000).
+		The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtraceidr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Trace ID register (0x200).
+		The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmteevr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Trace Enable Event register
+		(0x020). The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtsscr
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Trace Start/Stop Conrol
+		register (0x018). The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr1
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Enable Conrol #1
+		register (0x024). The value is read directly from the HW.
+
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/mgmt/etmtecr2
+Date:		September 2015
+KernelVersion:	4.4
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RO) Print the content of the ETM Enable Conrol #2
+		register (0x01c). The value is read directly from the HW.

Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth

+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/masters/*
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure output ports for STP masters. Writing -1
+		disables a master; any
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_port
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RO) Output port type:
+		  0: not present,
+		  1: MSU (Memory Storage Unit)
+		  2: CTP (Common Trace Port)
+		  4: PTI (MIPI PTI).
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_drop
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Data retention policy setting: keep (0) or drop (1)
+		incoming data while output port is in reset.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_null
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) STP NULL packet generation: enabled (1) or disabled (0).
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_flush
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Force flush data from byte packing buffer for the output
+		port.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_reset
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RO) Output port is in reset (1).
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-gth/outputs/[0-7]_smcfreq
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) STP sync packet frequency for the port. Specifies the
+		number of clocks between mainenance packets.

Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc

+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/wrap
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure MSC buffer wrapping. 1 == wrapping enabled.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/mode
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure MSC operating mode:
+		  - "single", for contiguous buffer mode (high-order alloc);
+		  - "multi", for multiblock mode;
+		  - "ExI", for DCI handler mode;
+		  - "debug", for debug mode.
+		If operating mode changes, existing buffer is deallocated,
+		provided there are no active users and tracing is not enabled,
+		otherwise the write will fail.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/nr_pages
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure MSC buffer size for "single" or "multi" modes.
+		In single mode, this is a single number of pages, has to be
+		power of 2. In multiblock mode, this is a comma-separated list
+		of numbers of pages for each window to be allocated. Number of
+		windows is not limited.
+		Writing to this file deallocates existing buffer (provided
+		there are no active users and tracing is not enabled) and then
+		allocates a new one.
+
+

Documentation/ABI/testing/sysfs-bus-intel_th-devices-pti

+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/mode
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure PTI output width. Currently supported values
+		are 4, 8, 12, 16.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/freerunning_clock
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) 0: PTI trace clock acts as a strobe which only toggles
+		when there is trace data to send. 1: PTI trace clock is a
+		free-running clock.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-pti/clock_divider
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Configure PTI port clock divider:
+		 - 0: Intel TH clock rate,
+		 - 1: 1/2 Intel TH clock rate,
+		 - 2: 1/4 Intel TH clock rate,
+		 - 3: 1/8 Intel TH clock rate.

Documentation/ABI/testing/sysfs-bus-intel_th-output-devices

+What:		/sys/bus/intel_th/devices/<intel_th_id>-<device><id>/active
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Writes of 1 or 0 enable or disable trace output to this
+		output device. Reads return current status.
+
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/port
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RO) Port number, corresponding to this output device on the
+		switch (GTH).

Documentation/ABI/testing/sysfs-bus-mei

@@ -19,3 +19,10 @@ KernelVersion:	4.2
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
 Description:	Stores mei client device uuid
 		Format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
+
+What:		/sys/bus/mei/devices/.../version
+Date:		Aug 2015
+KernelVersion:	4.3
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Stores mei client protocol version
+		Format: %d

Documentation/ABI/testing/sysfs-class-fpga-manager

+What:		/sys/class/fpga_manager/<fpga>/name
+Date:		August 2015
+KernelVersion:	4.3
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Name of low level fpga manager driver.
+
+What:		/sys/class/fpga_manager/<fpga>/state
+Date:		August 2015
+KernelVersion:	4.3
+Contact:	Alan Tull <atull@opensource.altera.com>
+Description:	Read fpga manager state as a string.
+		The intent is to provide enough detail that if something goes
+		wrong during FPGA programming (something that the driver can't
+		fix) then userspace can know, i.e. if the firmware request
+		fails, that could be due to not being able to find the firmware
+		file.
+
+		This is a superset of FPGA states and fpga manager driver
+		states.  The fpga manager driver is walking through these steps
+		to get the FPGA into a known operating state.  It's a sequence,
+		though some steps may get skipped.  Valid FPGA states will vary
+		by manufacturer; this is a superset.
+
+		* unknown		= can't determine state
+		* power off		= FPGA power is off
+		* power up		= FPGA reports power is up
+		* reset			= FPGA held in reset state
+		* firmware request	= firmware class request in progress
+		* firmware request error = firmware request failed
+		* write init		= preparing FPGA for programming
+		* write init error	= Error while preparing FPGA for
+					  programming
+		* write			= FPGA ready to receive image data
+		* write error		= Error while programming
+		* write complete	= Doing post programming steps
+		* write complete error	= Error while doing post programming
+		* operating		= FPGA is programmed and operating

Documentation/ABI/testing/sysfs-class-mic.txt

@@ -41,18 +41,15 @@ Description:
 		When read, this entry provides the current state of an Intel
 		MIC device in the context of the card OS. Possible values that
 		will be read are:
-		"offline" - The MIC device is ready to boot the card OS. On
+		"ready" - The MIC device is ready to boot the card OS. On
 		reading this entry after an OSPM resume, a "boot" has to be
 		written to this entry if the card was previously shutdown
 		during OSPM suspend.
-		"online" - The MIC device has initiated booting a card OS.
+		"booting" - The MIC device has initiated booting a card OS.
+		"online" - The MIC device has completed boot and is online
 		"shutting_down" - The card OS is shutting down.
+		"resetting" - A reset has been initiated for the MIC device
 		"reset_failed" - The MIC device has failed to reset.
-		"suspending" - The MIC device is currently being prepared for
-		suspend. On reading this entry, a "suspend" has to be written
-		to the state sysfs entry to ensure the card is shutdown during
-		OSPM suspend.
-		"suspended" - The MIC device has been suspended.
 
 		When written, this sysfs entry triggers different state change
 		operations depending upon the current state of the card OS.
@@ -62,8 +59,6 @@ Description:
 			sysfs entries.
 		"reset" - Initiates device reset.
 		"shutdown" - Initiates card OS shutdown.
-		"suspend" - Initiates card OS shutdown and also marks the card
-		as suspended.
 
 What:		/sys/class/mic/mic(x)/shutdown_status
 Date:		October 2013
@@ -126,7 +121,7 @@ Description:
 		the card. This sysfs entry can be written with the following
 		valid strings:
 		a) linux - Boot a Linux image.
-		b) elf - Boot an elf image for flash updates.
+		b) flash - Boot an image for flash updates.
 
 What:		/sys/class/mic/mic(x)/log_buf_addr
 Date:		October 2013
@@ -155,3 +150,17 @@ Description:
 		daemon to set the log buffer length address. The correct log
 		buffer length address to be written can be found in the
 		System.map file of the card OS.
+
+What:		/sys/class/mic/mic(x)/heartbeat_enable
+Date:		March 2015
+KernelVersion:	3.20
+Contact:	Ashutosh Dixit <ashutosh.dixit@intel.com>
+Description:
+		The MIC drivers detect and inform user space about card crashes
+		via a heartbeat mechanism (see the description of
+		shutdown_status above). User space can turn off this
+		notification by setting heartbeat_enable to 0 and enable it by
+		setting this entry to 1. If this notification is disabled it is
+		the responsibility of user space to detect card crashes via
+		alternative means such as a network ping. This setting is
+		enabled by default.

Documentation/ABI/testing/sysfs-class-stm

+What:		/sys/class/stm/<stm>/masters
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+		Shows first and last available to software master numbers on
+		this STM device.
+
+What:		/sys/class/stm/<stm>/channels
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+		Shows the number of channels per master on this STM device.

Documentation/ABI/testing/sysfs-class-stm_source

+What:		/sys/class/stm_source/<stm_source>/stm_source_link
+Date:		June 2015
+KernelVersion:	4.3
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:
+		stm_source device linkage to stm device, where its tracing data
+		is directed. Reads return an existing connection or "<none>" if
+		this stm_source is not connected to any stm device yet.
+		Write an existing (registered) stm device's name here to
+		connect that device. If a device is already connected to this
+		stm_source, it will first be disconnected.

Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt

+Xilinx Zynq FPGA Manager
+
+Required properties:
+- compatible:		should contain "xlnx,zynq-devcfg-1.0"
+- reg:			base address and size for memory mapped io
+- interrupts:		interrupt for the FPGA manager device
+- clocks:		phandle for clocks required operation
+- clock-names:		name for the clock, should be "ref_clk"
+- syscon:		phandle for access to SLCR registers
+
+Example:
+	devcfg: devcfg@f8007000 {
+		compatible = "xlnx,zynq-devcfg-1.0";
+		reg = <0xf8007000 0x100>;
+		interrupts = <0 8 4>;
+		clocks = <&clkc 12>;
+		clock-names = "ref_clk";
+		syscon = <&slcr>;
+	};

Documentation/devicetree/bindings/misc/sram.txt

@@ -33,6 +33,12 @@ Optional properties in the area nodes:
 
 - compatible : standard definition, should contain a vendor specific string
                in the form <vendor>,[<device>-]<usage>
+- pool : indicates that the particular reserved SRAM area is addressable
+         and in use by another device or devices
+- export : indicates that the reserved SRAM area may be accessed outside
+           of the kernel, e.g. by bootloader or userspace
+- label : the name for the reserved partition, if omitted, the label
+          is taken from the node name excluding the unit address.
 
 Example:
 
@@ -48,4 +54,14 @@ sram: sram@5c000000 {
 		compatible = "socvendor,smp-sram";
 		reg = <0x100 0x50>;
 	};
+
+	device-sram@1000 {
+		reg = <0x1000 0x1000>;
+		pool;
+	};
+
+	exported@20000 {
+		reg = <0x20000 0x20000>;
+		export;
+	};
 };

Documentation/devicetree/bindings/nvmem/imx-ocotp.txt

+Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
+
+This binding represents the on-chip eFuse OTP controller found on
+i.MX6Q/D, i.MX6DL/S, i.MX6SL, and i.MX6SX SoCs.
+
+Required properties:
+- compatible: should be one of
+	"fsl,imx6q-ocotp" (i.MX6Q/D/DL/S),
+	"fsl,imx6sl-ocotp" (i.MX6SL), or
+	"fsl,imx6sx-ocotp" (i.MX6SX), followed by "syscon".
+- reg: Should contain the register base and length.
+- clocks: Should contain a phandle pointing to the gated peripheral clock.
+
+Example:
+
+	ocotp: ocotp@021bc000 {
+		compatible = "fsl,imx6q-ocotp", "syscon";
+		reg = <0x021bc000 0x4000>;
+		clocks = <&clks IMX6QDL_CLK_IIM>;
+	};

Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt

+On-Chip OTP Memory for Freescale i.MX23/i.MX28
+
+Required properties :
+- compatible :
+  - "fsl,imx23-ocotp" for i.MX23
+  - "fsl,imx28-ocotp" for i.MX28
+- #address-cells : Should be 1
+- #size-cells : Should be 1
+- reg : Address and length of OTP controller registers
+- clocks : Should contain a reference to the hbus clock
+
+= Data cells =
+Are child nodes of mxs-ocotp, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example for i.MX28:
+
+	ocotp: ocotp@8002c000 {
+		compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x8002c000 0x2000>;
+		clocks = <&clks 25>;
+		status = "okay";
+	};

Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt

+= Rockchip eFuse device tree bindings =
+
+Required properties:
+- compatible: Should be "rockchip,rockchip-efuse"
+- reg: Should contain the registers location and exact eFuse size
+- clocks: Should be the clock id of eFuse
+- clock-names: Should be "pclk_efuse"
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	efuse: efuse@ffb40000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0xffb40000 0x20>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE256>;
+		clock-names = "pclk_efuse";
+
+		/* Data cells */
+		cpu_leakage: cpu_leakage {
+			reg = <0x17 0x1>;
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+	cpu_leakage {
+		...
+		nvmem-cells = <&cpu_leakage>;
+		nvmem-cell-names = "cpu_leakage";
+	};

Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt

+On-Chip OTP Memory for Freescale Vybrid
+
+Required Properties:
+  compatible:
+  - "fsl,vf610-ocotp" for VF5xx/VF6xx
+  #address-cells : Should be 1
+  #size-cells : Should be 1
+  reg : Address and length of OTP controller and fuse map registers
+  clocks : ipg clock we associate with the OCOTP peripheral
+
+Example for Vybrid VF5xx/VF6xx:
+
+	ocotp: ocotp@400a5000 {
+		compatible = "fsl,vf610-ocotp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x400a5000 0xCF0>;
+		clocks = <&clks VF610_CLK_OCOTP>;
+	};

Documentation/devicetree/bindings/w1/omap-hdq.txt

 * OMAP HDQ One wire bus master controller
 
 Required properties:
-- compatible : should be "ti,omap3-1w"
+- compatible : should be "ti,omap3-1w" or "ti,am4372-hdq"
 - reg : Address and length of the register set for the device
 - interrupts : interrupt line.
 - ti,hwmods : "hdq1w"
 
+Optional properties:
+- ti,mode: should be "hdq": HDQ mode  "1w": one-wire mode.
+	   If not specified HDQ mode is implied.
+
 Example:
 
 - From omap3.dtsi
@@ -14,4 +18,5 @@ Example:
 	reg = <0x480b2000 0x1000>;
 	interrupts = <58>;
 	ti,hwmods = "hdq1w";
+	ti,mode = "hdq";
   };

Documentation/fpga/fpga-mgr.txt

+FPGA Manager Core
+
+Alan Tull 2015
+
+Overview
+========
+
+The FPGA manager core exports a set of functions for programming an FPGA with
+an image.  The API is manufacturer agnostic.  All manufacturer specifics are
+hidden away in a low level driver which registers a set of ops with the core.
+The FPGA image data itself is very manufacturer specific, but for our purposes
+it's just binary data.  The FPGA manager core won't parse it.
+
+
+API Functions:
+==============
+
+To program the FPGA from a file or from a buffer:
+-------------------------------------------------
+
+	int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags,
+		              const char *buf, size_t count);
+
+Load the FPGA from an image which exists as a buffer in memory.
+
+	int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+		                   const char *image_name);
+
+Load the FPGA from an image which exists as a file.  The image file must be on
+the firmware search path (see the firmware class documentation).
+
+For both these functions, flags == 0 for normal full reconfiguration or
+FPGA_MGR_PARTIAL_RECONFIG for partial reconfiguration.  If successful, the FPGA
+ends up in operating mode.  Return 0 on success or a negative error code.
+
+
+To get/put a reference to a FPGA manager:
+-----------------------------------------
+
+	struct fpga_manager *of_fpga_mgr_get(struct device_node *node);
+
+	void fpga_mgr_put(struct fpga_manager *mgr);
+
+Given a DT node, get an exclusive reference to a FPGA manager or release
+the reference.
+
+
+To register or unregister the low level FPGA-specific driver:
+-------------------------------------------------------------
+
+	int fpga_mgr_register(struct device *dev, const char *name,
+		              const struct fpga_manager_ops *mops,
+		              void *priv);
+
+	void fpga_mgr_unregister(struct device *dev);
+
+Use of these two functions is described below in "How To Support a new FPGA
+device."
+
+
+How to write an image buffer to a supported FPGA
+================================================
+/* Include to get the API */
+#include <linux/fpga/fpga-mgr.h>
+
+/* device node that specifies the FPGA manager to use */
+struct device_node *mgr_node = ...
+
+/* FPGA image is in this buffer.  count is size of the buffer. */
+char *buf = ...
+int count = ...
+
+/* flags indicates whether to do full or partial reconfiguration */
+int flags = 0;
+
+int ret;
+
+/* Get exclusive control of FPGA manager */
+struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node);
+
+/* Load the buffer to the FPGA */
+ret = fpga_mgr_buf_load(mgr, flags, buf, count);
+
+/* Release the FPGA manager */
+fpga_mgr_put(mgr);
+
+
+How to write an image file to a supported FPGA
+==============================================
+/* Include to get the API */
+#include <linux/fpga/fpga-mgr.h>
+
+/* device node that specifies the FPGA manager to use */
+struct device_node *mgr_node = ...
+
+/* FPGA image is in this file which is in the firmware search path */
+const char *path = "fpga-image-9.rbf"
+
+/* flags indicates whether to do full or partial reconfiguration */
+int flags = 0;
+
+int ret;
+
+/* Get exclusive control of FPGA manager */
+struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node);
+
+/* Get the firmware image (path) and load it to the FPGA */
+ret = fpga_mgr_firmware_load(mgr, flags, path);
+
+/* Release the FPGA manager */
+fpga_mgr_put(mgr);
+
+
+How to support a new FPGA device
+================================
+To add another FPGA manager, write a driver that implements a set of ops.  The
+probe function calls fpga_mgr_register(), such as:
+
+static const struct fpga_manager_ops socfpga_fpga_ops = {
+       .write_init = socfpga_fpga_ops_configure_init,
+       .write = socfpga_fpga_ops_configure_write,
+       .write_complete = socfpga_fpga_ops_configure_complete,
+       .state = socfpga_fpga_ops_state,
+};
+
+static int socfpga_fpga_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct socfpga_fpga_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* ... do ioremaps, get interrupts, etc. and save
+	   them in priv... */
+
+	return fpga_mgr_register(dev, "Altera SOCFPGA FPGA Manager",
+				 &socfpga_fpga_ops, priv);
+}
+
+static int socfpga_fpga_remove(struct platform_device *pdev)
+{
+	fpga_mgr_unregister(&pdev->dev);
+
+	return 0;
+}
+
+
+The ops will implement whatever device specific register writes are needed to
+do the programming sequence for this particular FPGA.  These ops return 0 for
+success or negative error codes otherwise.
+
+The programming sequence is:
+ 1. .write_init
+ 2. .write (may be called once or multiple times)
+ 3. .write_complete
+
+The .write_init function will prepare the FPGA to receive the image data.
+
+The .write function writes a buffer to the FPGA. The buffer may be contain the
+whole FPGA image or may be a smaller chunk of an FPGA image.  In the latter
+case, this function is called multiple times for successive chunks.
+
+The .write_complete function is called after all the image has been written
+to put the FPGA into operating mode.
+
+The ops include a .state function which will read the hardware FPGA manager and
+return a code of type enum fpga_mgr_states.  It doesn't result in a change in
+hardware state.

Documentation/ioctl/ioctl-number.txt

@@ -81,6 +81,9 @@ Code  Seq#(hex)	Include File		Comments
 0x22	all	scsi/sg.h
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
 '$'	00-0F	linux/perf_counter.h, linux/perf_event.h
+'%'	00-0F	include/uapi/linux/stm.h
+					System Trace Module subsystem
+					<mailto:alexander.shishkin@linux.intel.com>
 '&'	00-07	drivers/firewire/nosy-user.h
 '1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
 					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>

Documentation/mic/mic_overview.txt

@@ -28,6 +28,10 @@ The Symmetric Communication Interface (SCIF (pronounced as skiff)) is a
 low level communications API across PCIe currently implemented for MIC.
 More details are available at scif_overview.txt.
 
+The Coprocessor State Management (COSM) driver on the host allows for
+boot, shutdown and reset of Intel MIC devices. It communicates with a COSM
+"client" driver on the MIC cards over SCIF to perform these functions.
+
 Here is a block diagram of the various components described above. The
 virtio backends are situated on the host rather than the card given better
 single threaded performance for the host compared to MIC, the ability of
@@ -51,18 +55,19 @@ the fact that the virtio block storage backend can only be on the host.
                       |               |       | Virtio over PCIe IOCTLs  |
                       |               |       +--------------------------+
 +-----------+         |               |                   |  +-----------+
-| MIC DMA   |         |  +----------+ | +-----------+     |  | MIC DMA   |
-| Driver    |         |  |  SCIF    | | |   SCIF    |     |  | Driver    |
-+-----------+         |  +----------+ | +-----------+     |  +-----------+
-      |               |       |       |       |           |        |
-+---------------+     | +-----+-----+ | +-----+-----+     | +---------------+
-|MIC virtual Bus|     | |SCIF HW Bus| | |SCIF HW BUS|     | |MIC virtual Bus|
-+---------------+     | +-----------+ | +-----+-----+     | +---------------+
-      |               |       |       |       |           |              |
-      |   +--------------+    |       |       |    +---------------+     |
+| MIC DMA   |         |      +------+ | +------+ +------+ |  | MIC DMA   |
+| Driver    |         |      | SCIF | | | SCIF | | COSM | |  | Driver    |
++-----------+         |      +------+ | +------+ +--+---+ |  +-----------+
+      |               |         |     |    |        |     |        |
++---------------+     |      +------+ | +--+---+ +--+---+ | +----------------+
+|MIC virtual Bus|     |      |SCIF  | | |SCIF  | | COSM | | |MIC virtual Bus |
++---------------+     |      |HW Bus| | |HW Bus| | Bus  | | +----------------+
+      |               |      +------+ | +--+---+ +------+ |              |
+      |               |         |     |       |     |     |              |
+      |   +-----------+---+     |     |       |    +---------------+     |
       |   |Intel MIC      |     |     |       |    |Intel MIC      |     |
-      +---|Card Driver   +----+       |       |    |Host Driver    |     |
-          +--------------+            |       +----+---------------+-----+
+      +---|Card Driver    |     |     |       |    |Host Driver    |     |
+          +------------+--------+     |       +----+---------------+-----+
                  |                    |                   |
              +-------------------------------------------------------------+
              |                                                             |

Documentation/mic/mpssd/mpss

@@ -119,10 +119,10 @@ stop()
 	# Wait for the cards to go offline
 	for f in $sysfs/*
 	do
-		while [ "`cat $f/state`" != "offline" ]
+		while [ "`cat $f/state`" != "ready" ]
 		do
 			sleep 1
-			echo -e "Waiting for "`basename $f`" to go offline"
+			echo -e "Waiting for "`basename $f`" to become ready"
 		done
 	done
 

Documentation/mic/mpssd/mpssd.h

@@ -86,6 +86,7 @@ struct mic_info {
 	int		id;
 	char		*name;
 	pthread_t       config_thread;
+	pthread_t       init_thread;
 	pid_t		pid;
 	struct mic_console_info	mic_console;
 	struct mic_net_info	mic_net;

Documentation/trace/intel_th.txt

+Intel(R) Trace Hub (TH)
+=======================
+
+Overview
+--------
+
+Intel(R) Trace Hub (TH) is a set of hardware blocks that produce,
+switch and output trace data from multiple hardware and software
+sources over several types of trace output ports encoded in System
+Trace Protocol (MIPI STPv2) and is intended to perform full system
+debugging. For more information on the hardware, see Intel(R) Trace
+Hub developer's manual [1].
+
+It consists of trace sources, trace destinations (outputs) and a
+switch (Global Trace Hub, GTH). These devices are placed on a bus of
+their own ("intel_th"), where they can be discovered and configured
+via sysfs attributes.
+
+Currently, the following Intel TH subdevices (blocks) are supported:
+  - Software Trace Hub (STH), trace source, which is a System Trace
+  Module (STM) device,
+  - Memory Storage Unit (MSU), trace output, which allows storing
+  trace hub output in system memory,
+  - Parallel Trace Interface output (PTI), trace output to an external
+  debug host via a PTI port,
+  - Global Trace Hub (GTH), which is a switch and a central component
+  of Intel(R) Trace Hub architecture.
+
+Common attributes for output devices are described in
+Documentation/ABI/testing/sysfs-bus-intel_th-output-devices, the most
+notable of them is "active", which enables or disables trace output
+into that particular output device.
+
+GTH allows directing different STP masters into different output ports
+via its "masters" attribute group. More detailed GTH interface
+description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth.
+
+STH registers an stm class device, through which it provides interface
+to userspace and kernelspace software trace sources. See
+Documentation/tracing/stm.txt for more information on that.
+
+MSU can be configured to collect trace data into a system memory
+buffer, which can later on be read from its device nodes via read() or
+mmap() interface.
+
+On the whole, Intel(R) Trace Hub does not require any special
+userspace software to function; everything can be configured, started
+and collected via sysfs attributes, and device nodes.
+
+[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
+
+Bus and Subdevices
+------------------
+
+For each Intel TH device in the system a bus of its own is
+created and assigned an id number that reflects the order in which TH
+devices were emumerated. All TH subdevices (devices on intel_th bus)
+begin with this id: 0-gth, 0-msc0, 0-msc1, 0-pti, 0-sth, which is
+followed by device's name and an optional index.
+
+Output devices also get a device node in /dev/intel_thN, where N is
+the Intel TH device id. For example, MSU's memory buffers, when
+allocated, are accessible via /dev/intel_th0/msc{0,1}.
+
+Quick example
+-------------
+
+# figure out which GTH port is the first memory controller:
+
+$ cat /sys/bus/intel_th/devices/0-msc0/port
+0
+
+# looks like it's port 0, configure master 33 to send data to port 0:
+
+$ echo 0 > /sys/bus/intel_th/devices/0-gth/masters/33
+
+# allocate a 2-windowed multiblock buffer on the first memory
+# controller, each with 64 pages:
+
+$ echo multi > /sys/bus/intel_th/devices/0-msc0/mode
+$ echo 64,64 > /sys/bus/intel_th/devices/0-msc0/nr_pages
+
+# enable wrapping for this controller, too:
+
+$ echo 1 > /sys/bus/intel_th/devices/0-msc0/wrap
+
+# and enable tracing into this port:
+
+$ echo 1 > /sys/bus/intel_th/devices/0-msc0/active
+
+# .. send data to master 33, see stm.txt for more details ..
+# .. wait for traces to pile up ..
+# .. and stop the trace:
+
+$ echo 0 > /sys/bus/intel_th/devices/0-msc0/active
+
+# and now you can collect the trace from the device node:
+
+$ cat /dev/intel_th0/msc0 > my_stp_trace

Documentation/trace/stm.txt

+System Trace Module
+===================
+
+System Trace Module (STM) is a device described in MIPI STP specs as
+STP trace stream generator. STP (System Trace Protocol) is a trace
+protocol multiplexing data from multiple trace sources, each one of
+which is assigned a unique pair of master and channel. While some of
+these masters and channels are statically allocated to certain
+hardware trace sources, others are available to software. Software
+trace sources are usually free to pick for themselves any
+master/channel combination from this pool.
+
+On the receiving end of this STP stream (the decoder side), trace
+sources can only be identified by master/channel combination, so in
+order for the decoder to be able to make sense of the trace that
+involves multiple trace sources, it needs to be able to map those
+master/channel pairs to the trace sources that it understands.
+
+For instance, it is helpful to know that syslog messages come on
+master 7 channel 15, while arbitrary user applications can use masters
+48 to 63 and channels 0 to 127.
+
+To solve this mapping problem, stm class provides a policy management
+mechanism via configfs, that allows defining rules that map string
+identifiers to ranges of masters and channels. If these rules (policy)
+are consistent with what decoder expects, it will be able to properly
+process the trace data.
+
+This policy is a tree structure containing rules (policy_node) that
+have a name (string identifier) and a range of masters and channels
+associated with it, located in "stp-policy" subsystem directory in
+configfs. The topmost directory's name (the policy) is formatted as
+the STM device name to which this policy applies and and arbitrary
+string identifier separated by a stop. From the examle above, a rule
+may look like this:
+
+$ ls /config/stp-policy/dummy_stm.my-policy/user
+channels masters
+$ cat /config/stp-policy/dummy_stm.my-policy/user/masters
+48 63
+$ cat /config/stp-policy/dummy_stm.my-policy/user/channels
+0 127
+
+which means that the master allocation pool for this rule consists of
+masters 48 through 63 and channel allocation pool has channels 0
+through 127 in it. Now, any producer (trace source) identifying itself
+with "user" identification string will be allocated a master and
+channel from within these ranges.
+
+These rules can be nested, for example, one can define a rule "dummy"
+under "user" directory from the example above and this new rule will
+be used for trace sources with the id string of "user/dummy".
+
+Trace sources have to open the stm class device's node and write their
+trace data into its file descriptor. In order to identify themselves
+to the policy, they need to do a STP_POLICY_ID_SET ioctl on this file
+descriptor providing their id string. Otherwise, they will be
+automatically allocated a master/channel pair upon first write to this
+file descriptor according to the "default" rule of the policy, if such
+exists.
+
+Some STM devices may allow direct mapping of the channel mmio regions
+to userspace for zero-copy writing. One mappable page (in terms of
+mmu) will usually contain multiple channels' mmios, so the user will
+need to allocate that many channels to themselves (via the
+aforementioned ioctl() call) to be able to do this. That is, if your
+stm device's channel mmio region is 64 bytes and hardware page size is
+4096 bytes, after a successful STP_POLICY_ID_SET ioctl() call with
+width==64, you should be able to mmap() one page on this file
+descriptor and obtain direct access to an mmio region for 64 channels.
+
+For kernel-based trace sources, there is "stm_source" device
+class. Devices of this class can be connected and disconnected to/from
+stm devices at runtime via a sysfs attribute.
+
+Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
+[2].
+
+[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
+[2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html

Documentation/w1/masters/omap-hdq

@@ -44,3 +44,9 @@ e.g:
 insmod omap_hdq.ko W1_ID=2
 inamod w1_bq27000.ko F_ID=2
 
+The driver also supports 1-wire mode. In this mode, there is no need to
+pass slave ID as parameter. The driver will auto-detect slaves connected
+to the bus using SEARCH_ROM procedure. 1-wire mode can be selected by
+setting "ti,mode" property to "1w" in DT (see
+Documentation/devicetree/bindings/w1/omap-hdq.txt for more details).
+By default driver is in HDQ mode.

MAINTAINERS

@@ -4355,6 +4355,13 @@ F:	include/linux/fmc*.h
 F:	include/linux/ipmi-fru.h
 K:	fmc_d.*register
 
+FPGA MANAGER FRAMEWORK
+M:	Alan Tull <atull@opensource.altera.com>
+S:	Maintained
+F:	drivers/fpga/
+F:	include/linux/fpga/fpga-mgr.h
+W:	http://www.rocketboards.org
+
 FPU EMULATOR
 M:	Bill Metzenthen <billm@melbpc.org.au>
 W:	http://floatingpoint.sourceforge.net/emulator/index.html
@@ -5551,6 +5558,12 @@ F:	Documentation/networking/README.ipw2100
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/
 
+INTEL(R) TRACE HUB
+M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+S:	Supported
+F:	Documentation/trace/intel_th.txt
+F:	drivers/hwtracing/intel_th/
+
 INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
 M:	Richard L Maliszewski <richard.l.maliszewski@intel.com>
 M:	Gang Wei <gang.wei@intel.com>
@@ -5598,6 +5611,22 @@ F:	include/linux/mei_cl_bus.h
 F:	drivers/misc/mei/*
 F:	Documentation/misc-devices/mei/*
 
+INTEL MIC DRIVERS (mic)
+M:	Sudeep Dutt <sudeep.dutt@intel.com>
+M:	Ashutosh Dixit <ashutosh.dixit@intel.com>
+S:	Supported
+W:	https://github.com/sudeepdutt/mic
+W:	http://software.intel.com/en-us/mic-developer
+F:	include/linux/mic_bus.h
+F:	include/linux/scif.h
+F:	include/uapi/linux/mic_common.h
+F: 	include/uapi/linux/mic_ioctl.h
+F	include/uapi/linux/scif_ioctl.h
+F:	drivers/misc/mic/
+F:	drivers/dma/mic_x100_dma.c
+F:	drivers/dma/mic_x100_dma.h
+F	Documentation/mic/
+
 INTEL PMC IPC DRIVER
 M:	Zha Qipeng<qipeng.zha@intel.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -9214,6 +9243,14 @@ S:	Maintained
 F:	include/linux/mmc/dw_mmc.h
 F:	drivers/mmc/host/dw_mmc*
 
+SYSTEM TRACE MODULE CLASS
+M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+S:	Maintained
+F:	Documentation/trace/stm.txt
+F:	drivers/hwtracing/stm/
+F:	include/linux/stm.h
+F:	include/uapi/linux/stm.h
+
 THUNDERBOLT DRIVER
 M:	Andreas Noever <andreas.noever@gmail.com>
 S:	Maintained

arch/arm/boot/dts/zynq-7000.dtsi

@@ -294,6 +294,11 @@ dmac_s: dmac@f8003000 {
 		devcfg: devcfg@f8007000 {
 			compatible = "xlnx,zynq-devcfg-1.0";
 			reg = <0xf8007000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 8 4>;
+			clocks = <&clkc 12>;
+			clock-names = "ref_clk";
+			syscon = <&slcr>;
 		};
 
 		global_timer: timer@f8f00200 {

drivers/Kconfig

@@ -192,4 +192,10 @@ source "drivers/nvdimm/Kconfig"
 
 source "drivers/nvmem/Kconfig"
 
+source "drivers/hwtracing/stm/Kconfig"
+
+source "drivers/hwtracing/intel_th/Kconfig"
+
+source "drivers/fpga/Kconfig"
+
 endmenu

drivers/Makefile

@@ -167,5 +167,8 @@ obj-$(CONFIG_PERF_EVENTS)	+= perf/
 obj-$(CONFIG_RAS)		+= ras/
 obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt/
 obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
+obj-y				+= hwtracing/intel_th/
+obj-$(CONFIG_STM)		+= hwtracing/stm/
 obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_NVMEM)		+= nvmem/
+obj-$(CONFIG_FPGA)		+= fpga/

drivers/char/efirtc.c

@@ -30,7 +30,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/rtc.h>
 #include <linux/proc_fs.h>
@@ -395,14 +394,8 @@ efi_rtc_init(void)
 	}
 	return 0;
 }
+device_initcall(efi_rtc_init);
 
-static void __exit
-efi_rtc_exit(void)
-{
-	/* not yet used */
-}
-
-module_init(efi_rtc_init);
-module_exit(efi_rtc_exit);
-
+/*
 MODULE_LICENSE("GPL");
+*/

drivers/char/hpet.c

@@ -12,7 +12,6 @@
  */
 
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/miscdevice.h>
@@ -1043,24 +1042,16 @@ static int hpet_acpi_add(struct acpi_device *device)
 	return hpet_alloc(&data);
 }
 
-static int hpet_acpi_remove(struct acpi_device *device)
-{
-	/* XXX need to unregister clocksource, dealloc mem, etc */
-	return -EINVAL;
-}
-
 static const struct acpi_device_id hpet_device_ids[] = {
 	{"PNP0103", 0},
 	{"", 0},
 };
-MODULE_DEVICE_TABLE(acpi, hpet_device_ids);
 
 static struct acpi_driver hpet_acpi_driver = {
 	.name = "hpet",
 	.ids = hpet_device_ids,
 	.ops = {
 		.add = hpet_acpi_add,
-		.remove = hpet_acpi_remove,
 		},
 };
 
@@ -1086,19 +1077,9 @@ static int __init hpet_init(void)
 
 	return 0;
 }
+device_initcall(hpet_init);
 
-static void __exit hpet_exit(void)
-{
-	acpi_bus_unregister_driver(&hpet_acpi_driver);
-
-	if (sysctl_header)
-		unregister_sysctl_table(sysctl_header);
-	misc_deregister(&hpet_misc);
-
-	return;
-}
-
-module_init(hpet_init);
-module_exit(hpet_exit);
+/*
 MODULE_AUTHOR("Bob Picco <Robert.Picco@hp.com>");
 MODULE_LICENSE("GPL");
+*/

drivers/char/ipmi/ipmi_ssif.c

@@ -52,6 +52,7 @@
 #include <linux/kthread.h>
 #include <linux/acpi.h>
 #include <linux/ctype.h>
+#include <linux/time64.h>
 
 #define PFX "ipmi_ssif: "
 #define DEVICE_NAME "ipmi_ssif"
@@ -1041,12 +1042,12 @@ static void sender(void                *send_info,
 	start_next_msg(ssif_info, flags);
 
 	if (ssif_info->ssif_debug & SSIF_DEBUG_TIMING) {
-		struct timeval t;
+		struct timespec64 t;
 
-		do_gettimeofday(&t);
-		pr_info("**Enqueue %02x %02x: %ld.%6.6ld\n",
+		ktime_get_real_ts64(&t);
+		pr_info("**Enqueue %02x %02x: %lld.%6.6ld\n",
 		       msg->data[0], msg->data[1],
-		       (long) t.tv_sec, (long) t.tv_usec);
+		       (long long) t.tv_sec, (long) t.tv_nsec / NSEC_PER_USEC);
 	}
 }
 

drivers/char/snsc.c

@@ -19,7 +19,7 @@
 #include <linux/sched.h>
 #include <linux/device.h>
 #include <linux/poll.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <asm/sn/io.h>
@@ -461,5 +461,4 @@ scdrv_init(void)
 	}
 	return 0;
 }
-
-module_init(scdrv_init);
+device_initcall(scdrv_init);

drivers/dma/mic_x100_dma.c

@@ -193,8 +193,16 @@ static void mic_dma_prog_intr(struct mic_dma_chan *ch)
 static int mic_dma_do_dma(struct mic_dma_chan *ch, int flags, dma_addr_t src,
 			  dma_addr_t dst, size_t len)
 {
-	if (-ENOMEM == mic_dma_prog_memcpy_desc(ch, src, dst, len))
+	if (len && -ENOMEM == mic_dma_prog_memcpy_desc(ch, src, dst, len)) {
 		return -ENOMEM;
+	} else {
+		/* 3 is the maximum number of status descriptors */
+		int ret = mic_dma_avail_desc_ring_space(ch, 3);
+
+		if (ret < 0)
+			return ret;
+	}
+
 	/* Above mic_dma_prog_memcpy_desc() makes sure we have enough space */
 	if (flags & DMA_PREP_FENCE) {
 		mic_dma_prep_status_desc(&ch->desc_ring[ch->head], 0,
@@ -270,6 +278,33 @@ allocate_tx(struct mic_dma_chan *ch)
 	return tx;
 }
 
+/* Program a status descriptor with dst as address and value to be written */
+static struct dma_async_tx_descriptor *
+mic_dma_prep_status_lock(struct dma_chan *ch, dma_addr_t dst, u64 src_val,
+			 unsigned long flags)
+{
+	struct mic_dma_chan *mic_ch = to_mic_dma_chan(ch);
+	int result;
+
+	spin_lock(&mic_ch->prep_lock);
+	result = mic_dma_avail_desc_ring_space(mic_ch, 4);
+	if (result < 0)
+		goto error;
+	mic_dma_prep_status_desc(&mic_ch->desc_ring[mic_ch->head], src_val, dst,
+				 false);
+	mic_dma_hw_ring_inc_head(mic_ch);
+	result = mic_dma_do_dma(mic_ch, flags, 0, 0, 0);
+	if (result < 0)
+		goto error;
+
+	return allocate_tx(mic_ch);
+error:
+	dev_err(mic_dma_ch_to_device(mic_ch),
+		"Error enqueueing dma status descriptor, error=%d\n", result);
+	spin_unlock(&mic_ch->prep_lock);
+	return NULL;
+}
+
 /*
  * Prepare a memcpy descriptor to be added to the ring.
  * Note that the temporary descriptor adds an extra overhead of copying the
@@ -587,6 +622,8 @@ static int mic_dma_register_dma_device(struct mic_dma_device *mic_dma_dev,
 		mic_dma_free_chan_resources;
 	mic_dma_dev->dma_dev.device_tx_status = mic_dma_tx_status;
 	mic_dma_dev->dma_dev.device_prep_dma_memcpy = mic_dma_prep_memcpy_lock;
+	mic_dma_dev->dma_dev.device_prep_dma_imm_data =
+		mic_dma_prep_status_lock;
 	mic_dma_dev->dma_dev.device_prep_dma_interrupt =
 		mic_dma_prep_interrupt_lock;
 	mic_dma_dev->dma_dev.device_issue_pending = mic_dma_issue_pending;

drivers/extcon/extcon-axp288.c

@@ -102,9 +102,9 @@ enum axp288_extcon_irq {
 };
 
 static const unsigned int axp288_extcon_cables[] = {
-	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM,
-	EXTCON_FAST_CHARGER,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_CHG_USB_DCP,
 	EXTCON_NONE,
 };
 
@@ -192,18 +192,18 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 		dev_dbg(info->dev, "sdp cable is connecetd\n");
 		notify_otg = true;
 		notify_charger = true;
-		cable = EXTCON_SLOW_CHARGER;
+		cable = EXTCON_CHG_USB_SDP;
 		break;
 	case DET_STAT_CDP:
 		dev_dbg(info->dev, "cdp cable is connecetd\n");
 		notify_otg = true;
 		notify_charger = true;
-		cable = EXTCON_CHARGE_DOWNSTREAM;
+		cable = EXTCON_CHG_USB_CDP;
 		break;
 	case DET_STAT_DCP:
 		dev_dbg(info->dev, "dcp cable is connecetd\n");
 		notify_charger = true;
-		cable = EXTCON_FAST_CHARGER;
+		cable = EXTCON_CHG_USB_DCP;
 		break;
 	default:
 		dev_warn(info->dev,
@@ -309,7 +309,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	}
 
 	/* Get otg transceiver phy */
-	info->otg = usb_get_phy(USB_PHY_TYPE_USB2);
+	info->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
 	if (IS_ERR(info->otg)) {
 		dev_err(&pdev->dev, "failed to get otg transceiver\n");
 		return PTR_ERR(info->otg);
@@ -318,11 +318,11 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	/* Set up gpio control for USB Mux */
 	if (info->pdata->gpio_mux_cntl) {
 		gpio = desc_to_gpio(info->pdata->gpio_mux_cntl);
-		ret = gpio_request(gpio, "USB_MUX");
+		ret = devm_gpio_request(&pdev->dev, gpio, "USB_MUX");
 		if (ret < 0) {
 			dev_err(&pdev->dev,
 				"failed to request the gpio=%d\n", gpio);
-			goto gpio_req_failed;
+			return ret;
 		}
 		gpiod_direction_output(info->pdata->gpio_mux_cntl,
 						EXTCON_GPIO_MUX_SEL_PMIC);
@@ -335,7 +335,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"failed to get virtual interrupt=%d\n", pirq);
 			ret = info->irq[i];
-			goto gpio_req_failed;
+			return ret;
 		}
 
 		ret = devm_request_threaded_irq(&pdev->dev, info->irq[i],
@@ -345,7 +345,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "failed to request interrupt=%d\n",
 							info->irq[i]);
-			goto gpio_req_failed;
+			return ret;
 		}
 	}
 
@@ -353,23 +353,10 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	axp288_extcon_enable_irq(info);
 
 	return 0;
-
-gpio_req_failed:
-	usb_put_phy(info->otg);
-	return ret;
-}
-
-static int axp288_extcon_remove(struct platform_device *pdev)
-{
-	struct axp288_extcon_info *info = platform_get_drvdata(pdev);
-
-	usb_put_phy(info->otg);
-	return 0;
 }
 
 static struct platform_driver axp288_extcon_driver = {
 	.probe = axp288_extcon_probe,
-	.remove = axp288_extcon_remove,
 	.driver = {
 		.name = "axp288_extcon",
 	},

drivers/extcon/extcon-gpio.c

 /*
- *  drivers/extcon/extcon_gpio.c
- *
- *  Single-state GPIO extcon driver based on extcon class
+ * extcon_gpio.c - Single-state GPIO extcon driver based on extcon class
  *
  * Copyright (C) 2008 Google, Inc.
  * Author: Mike Lockwood <lockwood@android.com>
@@ -17,12 +15,12 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
-*/
+ */
 
 #include <linux/extcon.h>
 #include <linux/extcon/extcon-gpio.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -33,14 +31,12 @@
 
 struct gpio_extcon_data {
 	struct extcon_dev *edev;
-	unsigned gpio;
-	bool gpio_active_low;
-	const char *state_on;
-	const char *state_off;
 	int irq;
 	struct delayed_work work;
 	unsigned long debounce_jiffies;
-	bool check_on_resume;
+
+	struct gpio_desc *id_gpiod;
+	struct gpio_extcon_pdata *pdata;
 };
 
 static void gpio_extcon_work(struct work_struct *work)
@@ -50,93 +46,107 @@ static void gpio_extcon_work(struct work_struct *work)
 		container_of(to_delayed_work(work), struct gpio_extcon_data,
 			     work);
 
-	state = gpio_get_value(data->gpio);
-	if (data->gpio_active_low)
+	state = gpiod_get_value_cansleep(data->id_gpiod);
+	if (data->pdata->gpio_active_low)
 		state = !state;
 	extcon_set_state(data->edev, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
 {
-	struct gpio_extcon_data *extcon_data = dev_id;
+	struct gpio_extcon_data *data = dev_id;
 
-	queue_delayed_work(system_power_efficient_wq, &extcon_data->work,
-			      extcon_data->debounce_jiffies);
+	queue_delayed_work(system_power_efficient_wq, &data->work,
+			      data->debounce_jiffies);
 	return IRQ_HANDLED;
 }
 
+static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
+{
+	struct gpio_extcon_pdata *pdata = data->pdata;
+	int ret;
+
+	ret = devm_gpio_request_one(dev, pdata->gpio, GPIOF_DIR_IN,
+				dev_name(dev));
+	if (ret < 0)
+		return ret;
+
+	data->id_gpiod = gpio_to_desc(pdata->gpio);
+	if (!data->id_gpiod)
+		return -EINVAL;
+
+	if (pdata->debounce) {
+		ret = gpiod_set_debounce(data->id_gpiod,
+					pdata->debounce * 1000);
+		if (ret < 0)
+			data->debounce_jiffies =
+				msecs_to_jiffies(pdata->debounce);
+	}
+
+	data->irq = gpiod_to_irq(data->id_gpiod);
+	if (data->irq < 0)
+		return data->irq;
+
+	return 0;
+}
+
 static int gpio_extcon_probe(struct platform_device *pdev)
 {
-	struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct gpio_extcon_data *extcon_data;
+	struct gpio_extcon_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct gpio_extcon_data *data;
 	int ret;
 
 	if (!pdata)
 		return -EBUSY;
-	if (!pdata->irq_flags) {
-		dev_err(&pdev->dev, "IRQ flag is not specified.\n");
+	if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
 		return -EINVAL;
-	}
 
-	extcon_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
+	data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
 				   GFP_KERNEL);
-	if (!extcon_data)
+	if (!data)
 		return -ENOMEM;
+	data->pdata = pdata;
 
-	extcon_data->edev = devm_extcon_dev_allocate(&pdev->dev, NULL);
-	if (IS_ERR(extcon_data->edev)) {
-		dev_err(&pdev->dev, "failed to allocate extcon device\n");
-		return -ENOMEM;
-	}
-
-	extcon_data->gpio = pdata->gpio;
-	extcon_data->gpio_active_low = pdata->gpio_active_low;
-	extcon_data->state_on = pdata->state_on;
-	extcon_data->state_off = pdata->state_off;
-	extcon_data->check_on_resume = pdata->check_on_resume;
-
-	ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
-				    pdev->name);
+	/* Initialize the gpio */
+	ret = gpio_extcon_init(&pdev->dev, data);
 	if (ret < 0)
 		return ret;
 
-	if (pdata->debounce) {
-		ret = gpio_set_debounce(extcon_data->gpio,
-					pdata->debounce * 1000);
-		if (ret < 0)
-			extcon_data->debounce_jiffies =
-				msecs_to_jiffies(pdata->debounce);
+	/* Allocate the memory of extcon devie and register extcon device */
+	data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata->extcon_id);
+	if (IS_ERR(data->edev)) {
+		dev_err(&pdev->dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
 	}
 
-	ret = devm_extcon_dev_register(&pdev->dev, extcon_data->edev);
+	ret = devm_extcon_dev_register(&pdev->dev, data->edev);
 	if (ret < 0)
 		return ret;
 
-	INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
-
-	extcon_data->irq = gpio_to_irq(extcon_data->gpio);
-	if (extcon_data->irq < 0)
-		return extcon_data->irq;
+	INIT_DELAYED_WORK(&data->work, gpio_extcon_work);
 
-	ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
-				      pdata->irq_flags, pdev->name,
-				      extcon_data);
+	/*
+	 * Request the interrput of gpio to detect whether external connector
+	 * is attached or detached.
+	 */
+	ret = devm_request_any_context_irq(&pdev->dev, data->irq,
+					gpio_irq_handler, pdata->irq_flags,
+					pdev->name, data);
 	if (ret < 0)
 		return ret;
 
-	platform_set_drvdata(pdev, extcon_data);
+	platform_set_drvdata(pdev, data);
 	/* Perform initial detection */
-	gpio_extcon_work(&extcon_data->work.work);
+	gpio_extcon_work(&data->work.work);
 
 	return 0;
 }
 
 static int gpio_extcon_remove(struct platform_device *pdev)
 {
-	struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
+	struct gpio_extcon_data *data = platform_get_drvdata(pdev);
 
-	cancel_delayed_work_sync(&extcon_data->work);
-	free_irq(extcon_data->irq, extcon_data);
+	cancel_delayed_work_sync(&data->work);
 
 	return 0;
 }
@@ -144,12 +154,12 @@ static int gpio_extcon_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int gpio_extcon_resume(struct device *dev)
 {
-	struct gpio_extcon_data *extcon_data;
+	struct gpio_extcon_data *data;
 
-	extcon_data = dev_get_drvdata(dev);
-	if (extcon_data->check_on_resume)
+	data = dev_get_drvdata(dev);
+	if (data->pdata->check_on_resume)
 		queue_delayed_work(system_power_efficient_wq,
-			&extcon_data->work, extcon_data->debounce_jiffies);
+			&data->work, data->debounce_jiffies);
 
 	return 0;
 }

drivers/extcon/extcon-max14577.c

@@ -150,10 +150,10 @@ enum max14577_muic_acc_type {
 
 static const unsigned int max14577_extcon_cable[] = {
 	EXTCON_USB,
-	EXTCON_TA,
-	EXTCON_FAST_CHARGER,
-	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_FAST,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_CHG_USB_CDP,
 	EXTCON_JIG,
 	EXTCON_NONE,
 };
@@ -456,18 +456,19 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
 		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_NONE:

drivers/extcon/extcon-max77693.c

@@ -204,11 +204,11 @@ enum max77693_muic_acc_type {
 static const unsigned int max77693_extcon_cable[] = {
 	EXTCON_USB,
 	EXTCON_USB_HOST,
-	EXTCON_TA,
-	EXTCON_FAST_CHARGER,
-	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM,
-	EXTCON_MHL,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_FAST,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_DISP_MHL,
 	EXTCON_JIG,
 	EXTCON_DOCK,
 	EXTCON_NONE,
@@ -505,7 +505,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 			return ret;
 
 		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
-		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
 		goto out;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
 		dock_id = EXTCON_DOCK;
@@ -605,7 +605,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 	case MAX77693_MUIC_GND_MHL:
 	case MAX77693_MUIC_GND_MHL_VB:
 		/* MHL or MHL with USB/TA cable */
-		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@@ -801,10 +801,11 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection
 			 */
-			extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
+			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+						attached);
 			if (!cable_attached)
-				extcon_set_cable_state_(info->edev, EXTCON_MHL,
-							cable_attached);
+				extcon_set_cable_state_(info->edev,
+					EXTCON_DISP_MHL, cable_attached);
 			break;
 		}
 
@@ -862,7 +863,7 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 
 			extcon_set_cable_state_(info->edev, EXTCON_DOCK,
 						attached);
-			extcon_set_cable_state_(info->edev, EXTCON_MHL,
+			extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL,
 						attached);
 			break;
 		}
@@ -901,20 +902,21 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			break;
 		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
 			/* Only TA cable */
-			extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
+			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+						attached);
 			break;
 		}
 		break;
 	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
-		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_DEAD_BATTERY:

drivers/extcon/extcon-max77843.c

@@ -122,11 +122,11 @@ enum max77843_muic_charger_type {
 static const unsigned int max77843_extcon_cable[] = {
 	EXTCON_USB,
 	EXTCON_USB_HOST,
-	EXTCON_TA,
-	EXTCON_CHARGE_DOWNSTREAM,
-	EXTCON_FAST_CHARGER,
-	EXTCON_SLOW_CHARGER,
-	EXTCON_MHL,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_CHG_USB_FAST,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_DISP_MHL,
 	EXTCON_JIG,
 	EXTCON_NONE,
 };
@@ -355,7 +355,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@@ -494,7 +494,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_DEDICATED:
@@ -504,7 +504,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
 		ret = max77843_muic_set_path(info,
@@ -513,7 +514,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
@@ -523,7 +524,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	case MAX77843_MUIC_CHG_GND:
@@ -532,9 +533,11 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 
 		/* Charger cable on MHL accessory is attach or detach */
 		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
-			extcon_set_cable_state_(info->edev, EXTCON_TA, true);
+			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+						true);
 		else if (gnd_type == MAX77843_MUIC_GND_MHL)
-			extcon_set_cable_state_(info->edev, EXTCON_TA, false);
+			extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+						false);
 		break;
 	case MAX77843_MUIC_CHG_NONE:
 		break;

drivers/extcon/extcon-max8997.c

@@ -148,11 +148,11 @@ struct max8997_muic_info {
 static const unsigned int max8997_extcon_cable[] = {
 	EXTCON_USB,
 	EXTCON_USB_HOST,
-	EXTCON_TA,
-	EXTCON_FAST_CHARGER,
-	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM,
-	EXTCON_MHL,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_FAST,
+	EXTCON_CHG_USB_SLOW,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_DISP_MHL,
 	EXTCON_DOCK,
 	EXTCON_JIG,
 	EXTCON_NONE,
@@ -403,7 +403,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 			return ret;
 		break;
 	case MAX8997_MUIC_ADC_MHL:
-		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
 		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@@ -486,18 +486,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
 					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+		extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
 					attached);
 		break;
 	default:

drivers/extcon/extcon-rt8973a.c

@@ -93,7 +93,7 @@ static struct reg_data rt8973a_reg_data[] = {
 static const unsigned int rt8973a_extcon_cable[] = {
 	EXTCON_USB,
 	EXTCON_USB_HOST,
-	EXTCON_TA,
+	EXTCON_CHG_USB_DCP,
 	EXTCON_JIG,
 	EXTCON_NONE,
 };
@@ -333,7 +333,7 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_TA:
-		id = EXTCON_TA;
+		id = EXTCON_CHG_USB_DCP;
 		con_sw = DM_DP_SWITCH_OPEN;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
@@ -594,7 +594,7 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
 
 	for (i = 0; i < info->num_muic_irqs; i++) {
 		struct muic_irq *muic_irq = &info->muic_irqs[i];
-		unsigned int virq = 0;
+		int virq = 0;
 
 		virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
 		if (virq <= 0)
@@ -658,6 +658,7 @@ static const struct of_device_id rt8973a_dt_match[] = {
 	{ .compatible = "richtek,rt8973a-muic" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, rt8973a_dt_match);
 
 #ifdef CONFIG_PM_SLEEP
 static int rt8973a_muic_suspend(struct device *dev)

drivers/extcon/extcon-sm5502.c

@@ -95,7 +95,7 @@ static struct reg_data sm5502_reg_data[] = {
 static const unsigned int sm5502_extcon_cable[] = {
 	EXTCON_USB,
 	EXTCON_USB_HOST,
-	EXTCON_TA,
+	EXTCON_CHG_USB_DCP,
 	EXTCON_NONE,
 };
 
@@ -389,7 +389,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT_WITH_USB;
 		break;
 	case SM5502_MUIC_ADC_OPEN_TA:
-		id	= EXTCON_TA;
+		id	= EXTCON_CHG_USB_DCP;
 		con_sw	= DM_DP_SWITCH_OPEN;
 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT;
 		break;
@@ -586,7 +586,7 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
 
 	for (i = 0; i < info->num_muic_irqs; i++) {
 		struct muic_irq *muic_irq = &info->muic_irqs[i];
-		unsigned int virq = 0;
+		int virq = 0;
 
 		virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
 		if (virq <= 0)
@@ -650,6 +650,7 @@ static const struct of_device_id sm5502_dt_match[] = {
 	{ .compatible = "siliconmitus,sm5502-muic" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, sm5502_dt_match);
 
 #ifdef CONFIG_PM_SLEEP
 static int sm5502_muic_suspend(struct device *dev)

drivers/extcon/extcon.c

@@ -45,28 +45,31 @@ static const char *extcon_name[] =  {
 	[EXTCON_USB]			= "USB",
 	[EXTCON_USB_HOST]		= "USB-HOST",
 
-	/* Charger external connector */
-	[EXTCON_TA]		= "TA",
-	[EXTCON_FAST_CHARGER]	= "FAST-CHARGER",
-	[EXTCON_SLOW_CHARGER]	= "SLOW-CHARGER",
-	[EXTCON_CHARGE_DOWNSTREAM] = "CHARGE-DOWNSTREAM",
-
-	/* Audio/Video external connector */
-	[EXTCON_LINE_IN]	= "LINE-IN",
-	[EXTCON_LINE_OUT]	= "LINE-OUT",
-	[EXTCON_MICROPHONE]	= "MICROPHONE",
-	[EXTCON_HEADPHONE]	= "HEADPHONE",
-
-	[EXTCON_HDMI]		= "HDMI",
-	[EXTCON_MHL]		= "MHL",
-	[EXTCON_DVI]		= "DVI",
-	[EXTCON_VGA]		= "VGA",
-	[EXTCON_SPDIF_IN]	= "SPDIF-IN",
-	[EXTCON_SPDIF_OUT]	= "SPDIF-OUT",
-	[EXTCON_VIDEO_IN]	= "VIDEO-IN",
-	[EXTCON_VIDEO_OUT]	= "VIDEO-OUT",
-
-	/* Etc external connector */
+	/* Charging external connector */
+	[EXTCON_CHG_USB_SDP]		= "SDP",
+	[EXTCON_CHG_USB_DCP]		= "DCP",
+	[EXTCON_CHG_USB_CDP]		= "CDP",
+	[EXTCON_CHG_USB_ACA]		= "ACA",
+	[EXTCON_CHG_USB_FAST]		= "FAST-CHARGER",
+	[EXTCON_CHG_USB_SLOW]		= "SLOW-CHARGER",
+
+	/* Jack external connector */
+	[EXTCON_JACK_MICROPHONE]	= "MICROPHONE",
+	[EXTCON_JACK_HEADPHONE]		= "HEADPHONE",
+	[EXTCON_JACK_LINE_IN]		= "LINE-IN",
+	[EXTCON_JACK_LINE_OUT]		= "LINE-OUT",
+	[EXTCON_JACK_VIDEO_IN]		= "VIDEO-IN",
+	[EXTCON_JACK_VIDEO_OUT]		= "VIDEO-OUT",
+	[EXTCON_JACK_SPDIF_IN]		= "SPDIF-IN",
+	[EXTCON_JACK_SPDIF_OUT]		= "SPDIF-OUT",
+
+	/* Display external connector */
+	[EXTCON_DISP_HDMI]		= "HDMI",
+	[EXTCON_DISP_MHL]		= "MHL",
+	[EXTCON_DISP_DVI]		= "DVI",
+	[EXTCON_DISP_VGA]		= "VGA",
+
+	/* Miscellaneous external connector */
 	[EXTCON_DOCK]			= "DOCK",
 	[EXTCON_JIG]			= "JIG",
 	[EXTCON_MECHANICAL]		= "MECHANICAL",

drivers/fpga/Kconfig

+#
+# FPGA framework configuration
+#
+
+menu "FPGA Configuration Support"
+
+config FPGA
+	tristate "FPGA Configuration Framework"
+	help
+	  Say Y here if you want support for configuring FPGAs from the
+	  kernel.  The FPGA framework adds a FPGA manager class and FPGA
+	  manager drivers.
+
+if FPGA
+
+config FPGA_MGR_SOCFPGA
+	tristate "Altera SOCFPGA FPGA Manager"
+	depends on ARCH_SOCFPGA
+	help
+	  FPGA manager driver support for Altera SOCFPGA.
+
+config FPGA_MGR_ZYNQ_FPGA
+	tristate "Xilinx Zynq FPGA"
+	help
+	  FPGA manager driver support for Xilinx Zynq FPGAs.
+
+endif # FPGA
+
+endmenu

drivers/fpga/Makefile

+#
+# Makefile for the fpga framework and fpga manager drivers.
+#
+
+# Core FPGA Manager Framework
+obj-$(CONFIG_FPGA)			+= fpga-mgr.o
+
+# FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
+obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o

drivers/hwtracing/coresight/coresight-etm3x.c

@@ -191,7 +191,8 @@ static void etm_set_prog(struct etm_drvdata *drvdata)
 	isb();
 	if (coresight_timeout_etm(drvdata, ETMSR, ETMSR_PROG_BIT, 1)) {
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n", ETMSR);
+			"%s: timeout observed when probing at offset %#x\n",
+			__func__, ETMSR);
 	}
 }
 
@@ -209,7 +210,8 @@ static void etm_clr_prog(struct etm_drvdata *drvdata)
 	isb();
 	if (coresight_timeout_etm(drvdata, ETMSR, ETMSR_PROG_BIT, 0)) {
 		dev_err(drvdata->dev,
-			"timeout observed when probing at offset %#x\n", ETMSR);
+			"%s: timeout observed when probing at offset %#x\n",
+			__func__, ETMSR);
 	}
 }
 
@@ -313,14 +315,6 @@ static void etm_enable_hw(void *info)
 	dev_dbg(drvdata->dev, "cpu: %d enable smp call done\n", drvdata->cpu);
 }
 
-static int etm_trace_id_simple(struct etm_drvdata *drvdata)
-{
-	if (!drvdata->enable)
-		return drvdata->traceid;
-
-	return (etm_readl(drvdata, ETMTRACEIDR) & ETM_TRACEID_MASK);
-}
-
 static int etm_trace_id(struct coresight_device *csdev)
 {
 	struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
@@ -1506,44 +1500,17 @@ static ssize_t timestamp_event_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(timestamp_event);
 
-static ssize_t status_show(struct device *dev,
+static ssize_t cpu_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	int ret;
-	unsigned long flags;
+	int val;
 	struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent);
 
-	pm_runtime_get_sync(drvdata->dev);
-	spin_lock_irqsave(&drvdata->spinlock, flags);
-
-	CS_UNLOCK(drvdata->base);
-	ret = sprintf(buf,
-		      "ETMCCR: 0x%08x\n"
-		      "ETMCCER: 0x%08x\n"
-		      "ETMSCR: 0x%08x\n"
-		      "ETMIDR: 0x%08x\n"
-		      "ETMCR: 0x%08x\n"
-		      "ETMTRACEIDR: 0x%08x\n"
-		      "Enable event: 0x%08x\n"
-		      "Enable start/stop: 0x%08x\n"
-		      "Enable control: CR1 0x%08x CR2 0x%08x\n"
-		      "CPU affinity: %d\n",
-		      drvdata->etmccr, drvdata->etmccer,
-		      etm_readl(drvdata, ETMSCR), etm_readl(drvdata, ETMIDR),
-		      etm_readl(drvdata, ETMCR), etm_trace_id_simple(drvdata),
-		      etm_readl(drvdata, ETMTEEVR),
-		      etm_readl(drvdata, ETMTSSCR),
-		      etm_readl(drvdata, ETMTECR1),
-		      etm_readl(drvdata, ETMTECR2),
-		      drvdata->cpu);
-	CS_LOCK(drvdata->base);
-
-	spin_unlock_irqrestore(&drvdata->spinlock, flags);
-	pm_runtime_put(drvdata->dev);
+	val = drvdata->cpu;
+	return scnprintf(buf, PAGE_SIZE, "%d\n", val);
 
-	return ret;
 }
-static DEVICE_ATTR_RO(status);
+static DEVICE_ATTR_RO(cpu);
 
 static ssize_t traceid_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
@@ -1619,11 +1586,61 @@ static struct attribute *coresight_etm_attrs[] = {
 	&dev_attr_ctxid_mask.attr,
 	&dev_attr_sync_freq.attr,
 	&dev_attr_timestamp_event.attr,
-	&dev_attr_status.attr,
 	&dev_attr_traceid.attr,
+	&dev_attr_cpu.attr,
+	NULL,
+};
+
+#define coresight_simple_func(name, offset)                             \
+static ssize_t name##_show(struct device *_dev,                         \
+			   struct device_attribute *attr, char *buf)    \
+{                                                                       \
+	struct etm_drvdata *drvdata = dev_get_drvdata(_dev->parent);    \
+	return scnprintf(buf, PAGE_SIZE, "0x%x\n",                      \
+			 readl_relaxed(drvdata->base + offset));        \
+}                                                                       \
+DEVICE_ATTR_RO(name)
+
+coresight_simple_func(etmccr, ETMCCR);
+coresight_simple_func(etmccer, ETMCCER);
+coresight_simple_func(etmscr, ETMSCR);
+coresight_simple_func(etmidr, ETMIDR);
+coresight_simple_func(etmcr, ETMCR);
+coresight_simple_func(etmtraceidr, ETMTRACEIDR);
+coresight_simple_func(etmteevr, ETMTEEVR);
+coresight_simple_func(etmtssvr, ETMTSSCR);
+coresight_simple_func(etmtecr1, ETMTECR1);
+coresight_simple_func(etmtecr2, ETMTECR2);
+
+static struct attribute *coresight_etm_mgmt_attrs[] = {
+	&dev_attr_etmccr.attr,
+	&dev_attr_etmccer.attr,
+	&dev_attr_etmscr.attr,
+	&dev_attr_etmidr.attr,
+	&dev_attr_etmcr.attr,
+	&dev_attr_etmtraceidr.attr,
+	&dev_attr_etmteevr.attr,
+	&dev_attr_etmtssvr.attr,
+	&dev_attr_etmtecr1.attr,
+	&dev_attr_etmtecr2.attr,
+	NULL,
+};
+
+static const struct attribute_group coresight_etm_group = {
+	.attrs = coresight_etm_attrs,
+};
+
+
+static const struct attribute_group coresight_etm_mgmt_group = {
+	.attrs = coresight_etm_mgmt_attrs,
+	.name = "mgmt",
+};
+
+static const struct attribute_group *coresight_etm_groups[] = {
+	&coresight_etm_group,
+	&coresight_etm_mgmt_group,
 	NULL,
 };
-ATTRIBUTE_GROUPS(coresight_etm);
 
 static int etm_cpu_callback(struct notifier_block *nfb, unsigned long action,
 			    void *hcpu)

drivers/hwtracing/coresight/coresight-etm4x.c

@@ -136,7 +136,9 @@ static void etm4_enable_hw(void *info)
 		writel_relaxed(drvdata->cntr_val[i],
 			       drvdata->base + TRCCNTVRn(i));
 	}
-	for (i = 0; i < drvdata->nr_resource; i++)
+
+	/* Resource selector pair 0 is always implemented and reserved */
+	for (i = 2; i < drvdata->nr_resource * 2; i++)
 		writel_relaxed(drvdata->res_ctrl[i],
 			       drvdata->base + TRCRSCTLRn(i));
 
@@ -489,8 +491,9 @@ static ssize_t reset_store(struct device *dev,
 		drvdata->cntr_val[i] = 0x0;
 	}
 
-	drvdata->res_idx = 0x0;
-	for (i = 0; i < drvdata->nr_resource; i++)
+	/* Resource selector pair 0 is always implemented and reserved */
+	drvdata->res_idx = 0x2;
+	for (i = 2; i < drvdata->nr_resource * 2; i++)
 		drvdata->res_ctrl[i] = 0x0;
 
 	for (i = 0; i < drvdata->nr_ss_cmp; i++) {
@@ -1732,7 +1735,7 @@ static ssize_t res_idx_store(struct device *dev,
 	if (kstrtoul(buf, 16, &val))
 		return -EINVAL;
 	/* Resource selector pair 0 is always implemented and reserved */
-	if ((val == 0) || (val >= drvdata->nr_resource))
+	if (val < 2 || val >= drvdata->nr_resource * 2)
 		return -EINVAL;
 
 	/*
@@ -2416,8 +2419,13 @@ static void etm4_init_arch_data(void *info)
 	drvdata->nr_addr_cmp = BMVAL(etmidr4, 0, 3);
 	/* NUMPC, bits[15:12] number of PE comparator inputs for tracing */
 	drvdata->nr_pe_cmp = BMVAL(etmidr4, 12, 15);
-	/* NUMRSPAIR, bits[19:16] the number of resource pairs for tracing */
-	drvdata->nr_resource = BMVAL(etmidr4, 16, 19);
+	/*
+	 * NUMRSPAIR, bits[19:16]
+	 * The number of resource pairs conveyed by the HW starts at 0, i.e a
+	 * value of 0x0 indicate 1 resource pair, 0x1 indicate two and so on.
+	 * As such add 1 to the value of NUMRSPAIR for a better representation.
+	 */
+	drvdata->nr_resource = BMVAL(etmidr4, 16, 19) + 1;
 	/*
 	 * NUMSSCC, bits[23:20] the number of single-shot
 	 * comparator control for tracing
@@ -2504,6 +2512,8 @@ static void etm4_init_default_data(struct etmv4_drvdata *drvdata)
 		drvdata->cntr_val[i] = 0x0;
 	}
 
+	/* Resource selector pair 0 is always implemented and reserved */
+	drvdata->res_idx = 0x2;
 	for (i = 2; i < drvdata->nr_resource * 2; i++)
 		drvdata->res_ctrl[i] = 0x0;
 

drivers/hwtracing/coresight/coresight.c

@@ -240,6 +240,11 @@ static int coresight_enable_path(struct list_head *path)
 	int ret = 0;
 	struct coresight_device *cd;
 
+	/*
+	 * At this point we have a full @path, from source to sink.  The
+	 * sink is the first entry and the source the last one.  Go through
+	 * all the components and enable them one by one.
+	 */
 	list_for_each_entry(cd, path, path_link) {
 		if (cd == list_first_entry(path, struct coresight_device,
 					   path_link)) {

drivers/hwtracing/intel_th/Kconfig

+config INTEL_TH
+	tristate "Intel(R) Trace Hub controller"
+	help
+	  Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that
+	  produce, switch and output trace data from multiple hardware and
+	  software sources over several types of trace output ports encoded
+	  in System Trace Protocol (MIPI STPv2) and is intended to perform
+	  full system debugging.
+
+	  This option enables intel_th bus and common code used by TH
+	  subdevices to interact with each other and hardware and for
+	  platform glue layers to drive Intel TH devices.
+
+	  Say Y here to enable Intel(R) Trace Hub controller support.
+
+if INTEL_TH
+
+config INTEL_TH_PCI
+	tristate "Intel(R) Trace Hub PCI controller"
+	depends on PCI
+	help
+	  Intel(R) Trace Hub may exist as a PCI device. This option enables
+	  support glue layer for PCI-based Intel TH.
+
+	  Say Y here to enable PCI Intel TH support.
+
+config INTEL_TH_GTH
+	tristate "Intel(R) Trace Hub Global Trace Hub"
+	help
+	  Global Trace Hub (GTH) is the central component of the
+	  Intel TH infrastructure and acts as a switch for source
+	  and output devices. This driver is required for other
+	  Intel TH subdevices to initialize.
+
+	  Say Y here to enable GTH subdevice of Intel(R) Trace Hub.
+
+config INTEL_TH_STH
+	tristate "Intel(R) Trace Hub Software Trace Hub support"
+	depends on STM
+	help
+	  Software Trace Hub (STH) enables trace data from software
+	  trace sources to be sent out via Intel(R) Trace Hub. It
+	  uses stm class device to interface with its sources.
+
+	  Say Y here to enable STH subdevice of Intel(R) Trace Hub.
+
+config INTEL_TH_MSU
+	tristate "Intel(R) Trace Hub Memory Storage Unit"
+	help
+	  Memory Storage Unit (MSU) trace output device enables
+	  storing STP traces to system memory. It supports single
+	  and multiblock modes of operation and provides read()
+	  and mmap() access to the collected data.
+
+	  Say Y here to enable MSU output device for Intel TH.
+
+config INTEL_TH_PTI
+	tristate "Intel(R) Trace Hub PTI output"
+	help
+	  Parallel Trace Interface unit (PTI) is a trace output device
+	  of Intel TH architecture that facilitates STP trace output via
+	  a PTI port.
+
+	  Say Y to enable PTI output of Intel TH data.
+
+config INTEL_TH_DEBUG
+	bool "Intel(R) Trace Hub debugging"
+	depends on DEBUG_FS
+	help
+	  Say Y here to enable debugging.
+
+endif

drivers/hwtracing/intel_th/Makefile

+obj-$(CONFIG_INTEL_TH)		+= intel_th.o
+intel_th-y			:= core.o
+intel_th-$(CONFIG_INTEL_TH_DEBUG) += debug.o
+
+obj-$(CONFIG_INTEL_TH_PCI)	+= intel_th_pci.o
+intel_th_pci-y			:= pci.o
+
+obj-$(CONFIG_INTEL_TH_GTH)	+= intel_th_gth.o
+intel_th_gth-y			:= gth.o
+
+obj-$(CONFIG_INTEL_TH_STH)	+= intel_th_sth.o
+intel_th_sth-y			:= sth.o
+
+obj-$(CONFIG_INTEL_TH_MSU)	+= intel_th_msu.o
+intel_th_msu-y			:= msu.o
+
+obj-$(CONFIG_INTEL_TH_PTI)	+= intel_th_pti.o
+intel_th_pti-y			:= pti.o

drivers/hwtracing/intel_th/debug.c

+/*
+ * Intel(R) Trace Hub driver debugging
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+
+#include "intel_th.h"
+#include "debug.h"
+
+struct dentry *intel_th_dbg;
+
+void intel_th_debug_init(void)
+{
+	intel_th_dbg = debugfs_create_dir("intel_th", NULL);
+	if (IS_ERR(intel_th_dbg))
+		intel_th_dbg = NULL;
+}
+
+void intel_th_debug_done(void)
+{
+	debugfs_remove(intel_th_dbg);
+	intel_th_dbg = NULL;
+}

drivers/hwtracing/intel_th/debug.h

+/*
+ * Intel(R) Trace Hub driver debugging
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __INTEL_TH_DEBUG_H__
+#define __INTEL_TH_DEBUG_H__
+
+#ifdef CONFIG_INTEL_TH_DEBUG
+extern struct dentry *intel_th_dbg;
+
+void intel_th_debug_init(void);
+void intel_th_debug_done(void);
+#else
+static inline void intel_th_debug_init(void)
+{
+}
+
+static inline void intel_th_debug_done(void)
+{
+}
+#endif
+
+#endif /* __INTEL_TH_DEBUG_H__ */

drivers/hwtracing/intel_th/gth.h

+/*
+ * Intel(R) Trace Hub Global Trace Hub (GTH) data structures
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __INTEL_TH_GTH_H__
+#define __INTEL_TH_GTH_H__
+
+/* Map output port parameter bits to symbolic names */
+#define TH_OUTPUT_PARM(name)			\
+	TH_OUTPUT_ ## name
+
+enum intel_th_output_parm {
+	/* output port type */
+	TH_OUTPUT_PARM(port),
+	/* generate NULL packet */
+	TH_OUTPUT_PARM(null),
+	/* packet drop */
+	TH_OUTPUT_PARM(drop),
+	/* port in reset state */
+	TH_OUTPUT_PARM(reset),
+	/* flush out data */
+	TH_OUTPUT_PARM(flush),
+	/* mainenance packet frequency */
+	TH_OUTPUT_PARM(smcfreq),
+};
+
+/*
+ * Register offsets
+ */
+enum {
+	REG_GTH_GTHOPT0		= 0x00, /* Output ports 0..3 config */
+	REG_GTH_GTHOPT1		= 0x04, /* Output ports 4..7 config */
+	REG_GTH_SWDEST0		= 0x08, /* Switching destination masters 0..7 */
+	REG_GTH_GSWTDEST	= 0x88, /* Global sw trace destination */
+	REG_GTH_SMCR0		= 0x9c, /* STP mainenance for ports 0/1 */
+	REG_GTH_SMCR1		= 0xa0, /* STP mainenance for ports 2/3 */
+	REG_GTH_SMCR2		= 0xa4, /* STP mainenance for ports 4/5 */
+	REG_GTH_SMCR3		= 0xa8, /* STP mainenance for ports 6/7 */
+	REG_GTH_SCR		= 0xc8, /* Source control (storeEn override) */
+	REG_GTH_STAT		= 0xd4, /* GTH status */
+	REG_GTH_SCR2		= 0xd8, /* Source control (force storeEn off) */
+	REG_GTH_DESTOVR		= 0xdc, /* Destination override */
+	REG_GTH_SCRPD0		= 0xe0, /* ScratchPad[0] */
+	REG_GTH_SCRPD1		= 0xe4, /* ScratchPad[1] */
+	REG_GTH_SCRPD2		= 0xe8, /* ScratchPad[2] */
+	REG_GTH_SCRPD3		= 0xec, /* ScratchPad[3] */
+};
+
+/* Externall debugger is using Intel TH */
+#define SCRPD_DEBUGGER_IN_USE	BIT(24)
+
+/* waiting for Pipeline Empty bit(s) to assert for GTH */
+#define GTH_PLE_WAITLOOP_DEPTH	10000
+
+#endif /* __INTEL_TH_GTH_H__ */

drivers/hwtracing/intel_th/msu.h

+/*
+ * Intel(R) Trace Hub Memory Storage Unit (MSU) data structures
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __INTEL_TH_MSU_H__
+#define __INTEL_TH_MSU_H__
+
+enum {
+	REG_MSU_MSUPARAMS	= 0x0000,
+	REG_MSU_MSUSTS		= 0x0008,
+	REG_MSU_MSC0CTL		= 0x0100, /* MSC0 control */
+	REG_MSU_MSC0STS		= 0x0104, /* MSC0 status */
+	REG_MSU_MSC0BAR		= 0x0108, /* MSC0 output base address */
+	REG_MSU_MSC0SIZE	= 0x010c, /* MSC0 output size */
+	REG_MSU_MSC0MWP		= 0x0110, /* MSC0 write pointer */
+	REG_MSU_MSC0NWSA	= 0x011c, /* MSC0 next window start address */
+
+	REG_MSU_MSC1CTL		= 0x0200, /* MSC1 control */
+	REG_MSU_MSC1STS		= 0x0204, /* MSC1 status */
+	REG_MSU_MSC1BAR		= 0x0208, /* MSC1 output base address */
+	REG_MSU_MSC1SIZE	= 0x020c, /* MSC1 output size */
+	REG_MSU_MSC1MWP		= 0x0210, /* MSC1 write pointer */
+	REG_MSU_MSC1NWSA	= 0x021c, /* MSC1 next window start address */
+};
+
+/* MSUSTS bits */
+#define MSUSTS_MSU_INT	BIT(0)
+
+/* MSCnCTL bits */
+#define MSC_EN		BIT(0)
+#define MSC_WRAPEN	BIT(1)
+#define MSC_RD_HDR_OVRD	BIT(2)
+#define MSC_MODE	(BIT(4) | BIT(5))
+#define MSC_LEN		(BIT(8) | BIT(9) | BIT(10))
+
+/* MSC operating modes (MSC_MODE) */
+enum {
+	MSC_MODE_SINGLE	= 0,
+	MSC_MODE_MULTI,
+	MSC_MODE_EXI,
+	MSC_MODE_DEBUG,
+};
+
+/* MSCnSTS bits */
+#define MSCSTS_WRAPSTAT	BIT(1)	/* Wrap occurred */
+#define MSCSTS_PLE	BIT(2)	/* Pipeline Empty */
+
+/*
+ * Multiblock/multiwindow block descriptor
+ */
+struct msc_block_desc {
+	u32	sw_tag;
+	u32	block_sz;
+	u32	next_blk;
+	u32	next_win;
+	u32	res0[4];
+	u32	hw_tag;
+	u32	valid_dw;
+	u32	ts_low;
+	u32	ts_high;
+	u32	res1[4];
+} __packed;
+
+#define MSC_BDESC	sizeof(struct msc_block_desc)
+#define DATA_IN_PAGE	(PAGE_SIZE - MSC_BDESC)
+
+/* MSC multiblock sw tag bits */
+#define MSC_SW_TAG_LASTBLK	BIT(0)
+#define MSC_SW_TAG_LASTWIN	BIT(1)
+
+/* MSC multiblock hw tag bits */
+#define MSC_HW_TAG_TRIGGER	BIT(0)
+#define MSC_HW_TAG_BLOCKWRAP	BIT(1)
+#define MSC_HW_TAG_WINWRAP	BIT(2)
+#define MSC_HW_TAG_ENDBIT	BIT(3)
+
+static inline unsigned long msc_data_sz(struct msc_block_desc *bdesc)
+{
+	if (!bdesc->valid_dw)
+		return 0;
+
+	return bdesc->valid_dw * 4 - MSC_BDESC;
+}
+
+static inline bool msc_block_wrapped(struct msc_block_desc *bdesc)
+{
+	if (bdesc->hw_tag & MSC_HW_TAG_BLOCKWRAP)
+		return true;
+
+	return false;
+}
+
+static inline bool msc_block_last_written(struct msc_block_desc *bdesc)
+{
+	if ((bdesc->hw_tag & MSC_HW_TAG_ENDBIT) ||
+	    (msc_data_sz(bdesc) != DATA_IN_PAGE))
+		return true;
+
+	return false;
+}
+
+/* waiting for Pipeline Empty bit(s) to assert for MSC */
+#define MSC_PLE_WAITLOOP_DEPTH	10000
+
+#endif /* __INTEL_TH_MSU_H__ */

drivers/hwtracing/intel_th/pci.c

+/*
+ * Intel(R) Trace Hub pci driver
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/pci.h>
+
+#include "intel_th.h"
+
+#define DRIVER_NAME "intel_th_pci"
+
+#define BAR_MASK (BIT(TH_MMIO_CONFIG) | BIT(TH_MMIO_SW))
+
+static int intel_th_pci_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *id)
+{
+	struct intel_th *th;
+	int err;
+
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pcim_iomap_regions_request_all(pdev, BAR_MASK, DRIVER_NAME);
+	if (err)
+		return err;
+
+	th = intel_th_alloc(&pdev->dev, pdev->resource,
+			    DEVICE_COUNT_RESOURCE, pdev->irq);
+	if (IS_ERR(th))
+		return PTR_ERR(th);
+
+	pci_set_drvdata(pdev, th);
+
+	return 0;
+}
+
+static void intel_th_pci_remove(struct pci_dev *pdev)
+{
+	struct intel_th *th = pci_get_drvdata(pdev);
+
+	intel_th_free(th);
+}
+
+static const struct pci_device_id intel_th_pci_id_table[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9d26),
+		.driver_data = (kernel_ulong_t)0,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa126),
+		.driver_data = (kernel_ulong_t)0,
+	},
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, intel_th_pci_id_table);
+
+static struct pci_driver intel_th_pci_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= intel_th_pci_id_table,
+	.probe		= intel_th_pci_probe,
+	.remove		= intel_th_pci_remove,
+};
+
+module_pci_driver(intel_th_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel(R) Trace Hub PCI controller driver");
+MODULE_AUTHOR("Alexander Shishkin <alexander.shishkin@intel.com>");

drivers/hwtracing/stm/Makefile

+obj-$(CONFIG_STM)	+= stm_core.o
+
+stm_core-y		:= core.o policy.o
+
+obj-$(CONFIG_STM_DUMMY)	+= dummy_stm.o
+
+obj-$(CONFIG_STM_SOURCE_CONSOLE)	+= stm_console.o
+
+stm_console-y		:= console.o

drivers/mcb/mcb-core.c

@@ -409,6 +409,7 @@ static int mcb_init(void)
 
 static void mcb_exit(void)
 {
+	ida_destroy(&mcb_ida);
 	bus_unregister(&mcb_bus_type);
 }
 

drivers/misc/ad525x_dpot-i2c.c

@@ -117,4 +117,3 @@ module_i2c_driver(ad_dpot_i2c_driver);
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("digital potentiometer I2C bus driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("i2c:ad_dpot");