Commit 8e8b92ee authored by Luiz Augusto von Dentz's avatar Luiz Augusto von Dentz Committed by Marcel Holtmann

Bluetooth: hci_sync: Add hci_le_create_conn_sync

This adds hci_le_create_conn_sync and make hci_le_connect use it instead
of queueing multiple commands which may conflict with the likes of
hci_update_passive_scan which uses hci_cmd_sync_queue.
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent fee64503
......@@ -1121,8 +1121,7 @@ struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
enum conn_reasons conn_reason);
struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
u8 dst_type, bool dst_resolved, u8 sec_level,
u16 conn_timeout, u8 role,
bdaddr_t *direct_rpa);
u16 conn_timeout, u8 role);
struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
u8 sec_level, u8 auth_type,
enum conn_reasons conn_reason);
......
......@@ -102,3 +102,7 @@ int hci_stop_discovery_sync(struct hci_dev *hdev);
int hci_suspend_sync(struct hci_dev *hdev);
int hci_resume_sync(struct hci_dev *hdev);
struct hci_conn;
int hci_le_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn);
......@@ -911,267 +911,45 @@ void hci_le_conn_failed(struct hci_conn *conn, u8 status)
hci_enable_advertising(hdev);
}
static void create_le_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
static void create_le_conn_complete(struct hci_dev *hdev, void *data, int err)
{
struct hci_conn *conn;
struct hci_conn *conn = data;
hci_dev_lock(hdev);
conn = hci_lookup_le_connect(hdev);
if (hdev->adv_instance_cnt)
hci_req_resume_adv_instances(hdev);
if (!status) {
if (!err) {
hci_connect_le_scan_cleanup(conn);
goto done;
}
bt_dev_err(hdev, "request failed to create LE connection: "
"status 0x%2.2x", status);
bt_dev_err(hdev, "request failed to create LE connection: err %d", err);
if (!conn)
goto done;
hci_le_conn_failed(conn, status);
hci_le_conn_failed(conn, err);
done:
hci_dev_unlock(hdev);
}
static bool conn_use_rpa(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
return hci_dev_test_flag(hdev, HCI_PRIVACY);
}
static void set_ext_conn_params(struct hci_conn *conn,
struct hci_cp_le_ext_conn_param *p)
{
struct hci_dev *hdev = conn->hdev;
memset(p, 0, sizeof(*p));
p->scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
p->scan_window = cpu_to_le16(hdev->le_scan_window_connect);
p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
p->conn_latency = cpu_to_le16(conn->le_conn_latency);
p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
p->min_ce_len = cpu_to_le16(0x0000);
p->max_ce_len = cpu_to_le16(0x0000);
}
static void hci_req_add_le_create_conn(struct hci_request *req,
struct hci_conn *conn,
bdaddr_t *direct_rpa)
{
struct hci_dev *hdev = conn->hdev;
u8 own_addr_type;
/* If direct address was provided we use it instead of current
* address.
*/
if (direct_rpa) {
if (bacmp(&req->hdev->random_addr, direct_rpa))
hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
direct_rpa);
/* direct address is always RPA */
own_addr_type = ADDR_LE_DEV_RANDOM;
} else {
/* Update random address, but set require_privacy to false so
* that we never connect with an non-resolvable address.
*/
if (hci_update_random_address(req, false, conn_use_rpa(conn),
&own_addr_type))
return;
}
if (use_ext_conn(hdev)) {
struct hci_cp_le_ext_create_conn *cp;
struct hci_cp_le_ext_conn_param *p;
u8 data[sizeof(*cp) + sizeof(*p) * 3];
u32 plen;
cp = (void *) data;
p = (void *) cp->data;
memset(cp, 0, sizeof(*cp));
bacpy(&cp->peer_addr, &conn->dst);
cp->peer_addr_type = conn->dst_type;
cp->own_addr_type = own_addr_type;
plen = sizeof(*cp);
if (scan_1m(hdev)) {
cp->phys |= LE_SCAN_PHY_1M;
set_ext_conn_params(conn, p);
p++;
plen += sizeof(*p);
}
if (scan_2m(hdev)) {
cp->phys |= LE_SCAN_PHY_2M;
set_ext_conn_params(conn, p);
p++;
plen += sizeof(*p);
}
if (scan_coded(hdev)) {
cp->phys |= LE_SCAN_PHY_CODED;
set_ext_conn_params(conn, p);
plen += sizeof(*p);
}
hci_req_add(req, HCI_OP_LE_EXT_CREATE_CONN, plen, data);
} else {
struct hci_cp_le_create_conn cp;
memset(&cp, 0, sizeof(cp));
cp.scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
cp.scan_window = cpu_to_le16(hdev->le_scan_window_connect);
bacpy(&cp.peer_addr, &conn->dst);
cp.peer_addr_type = conn->dst_type;
cp.own_address_type = own_addr_type;
cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
cp.min_ce_len = cpu_to_le16(0x0000);
cp.max_ce_len = cpu_to_le16(0x0000);
hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
}
conn->state = BT_CONNECT;
clear_bit(HCI_CONN_SCANNING, &conn->flags);
}
static void hci_req_directed_advertising(struct hci_request *req,
struct hci_conn *conn)
static int hci_connect_le_sync(struct hci_dev *hdev, void *data)
{
struct hci_dev *hdev = req->hdev;
u8 own_addr_type;
u8 enable;
if (ext_adv_capable(hdev)) {
struct hci_cp_le_set_ext_adv_params cp;
bdaddr_t random_addr;
/* Set require_privacy to false so that the remote device has a
* chance of identifying us.
*/
if (hci_get_random_address(hdev, false, conn_use_rpa(conn), NULL,
&own_addr_type, &random_addr) < 0)
return;
memset(&cp, 0, sizeof(cp));
cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_DIRECT_IND);
cp.own_addr_type = own_addr_type;
cp.channel_map = hdev->le_adv_channel_map;
cp.tx_power = HCI_TX_POWER_INVALID;
cp.primary_phy = HCI_ADV_PHY_1M;
cp.secondary_phy = HCI_ADV_PHY_1M;
cp.handle = 0; /* Use instance 0 for directed adv */
cp.own_addr_type = own_addr_type;
cp.peer_addr_type = conn->dst_type;
bacpy(&cp.peer_addr, &conn->dst);
/* As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for
* advertising_event_property LE_LEGACY_ADV_DIRECT_IND
* does not supports advertising data when the advertising set already
* contains some, the controller shall return erroc code 'Invalid
* HCI Command Parameters(0x12).
* So it is required to remove adv set for handle 0x00. since we use
* instance 0 for directed adv.
*/
__hci_req_remove_ext_adv_instance(req, cp.handle);
hci_req_add(req, HCI_OP_LE_SET_EXT_ADV_PARAMS, sizeof(cp), &cp);
struct hci_conn *conn = data;
if (own_addr_type == ADDR_LE_DEV_RANDOM &&
bacmp(&random_addr, BDADDR_ANY) &&
bacmp(&random_addr, &hdev->random_addr)) {
struct hci_cp_le_set_adv_set_rand_addr cp;
memset(&cp, 0, sizeof(cp));
cp.handle = 0;
bacpy(&cp.bdaddr, &random_addr);
hci_req_add(req,
HCI_OP_LE_SET_ADV_SET_RAND_ADDR,
sizeof(cp), &cp);
}
__hci_req_enable_ext_advertising(req, 0x00);
} else {
struct hci_cp_le_set_adv_param cp;
bt_dev_dbg(hdev, "conn %p", conn);
/* Clear the HCI_LE_ADV bit temporarily so that the
* hci_update_random_address knows that it's safe to go ahead
* and write a new random address. The flag will be set back on
* as soon as the SET_ADV_ENABLE HCI command completes.
*/
hci_dev_clear_flag(hdev, HCI_LE_ADV);
/* Set require_privacy to false so that the remote device has a
* chance of identifying us.
*/
if (hci_update_random_address(req, false, conn_use_rpa(conn),
&own_addr_type) < 0)
return;
memset(&cp, 0, sizeof(cp));
/* Some controllers might reject command if intervals are not
* within range for undirected advertising.
* BCM20702A0 is known to be affected by this.
*/
cp.min_interval = cpu_to_le16(0x0020);
cp.max_interval = cpu_to_le16(0x0020);
cp.type = LE_ADV_DIRECT_IND;
cp.own_address_type = own_addr_type;
cp.direct_addr_type = conn->dst_type;
bacpy(&cp.direct_addr, &conn->dst);
cp.channel_map = hdev->le_adv_channel_map;
hci_req_add(req, HCI_OP_LE_SET_ADV_PARAM, sizeof(cp), &cp);
enable = 0x01;
hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
&enable);
}
conn->state = BT_CONNECT;
return hci_le_create_conn_sync(hdev, conn);
}
struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
u8 dst_type, bool dst_resolved, u8 sec_level,
u16 conn_timeout, u8 role, bdaddr_t *direct_rpa)
u16 conn_timeout, u8 role)
{
struct hci_conn_params *params;
struct hci_conn *conn;
struct smp_irk *irk;
struct hci_request req;
int err;
/* This ensures that during disable le_scan address resolution
* will not be disabled if it is followed by le_create_conn
*/
bool rpa_le_conn = true;
/* Let's make sure that le is enabled.*/
if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
if (lmp_le_capable(hdev))
......@@ -1230,68 +1008,13 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
conn->sec_level = BT_SECURITY_LOW;
conn->conn_timeout = conn_timeout;
hci_req_init(&req, hdev);
/* Disable advertising if we're active. For central role
* connections most controllers will refuse to connect if
* advertising is enabled, and for peripheral role connections we
* anyway have to disable it in order to start directed
* advertising. Any registered advertisements will be
* re-enabled after the connection attempt is finished.
*/
if (hci_dev_test_flag(hdev, HCI_LE_ADV))
__hci_req_pause_adv_instances(&req);
/* If requested to connect as peripheral use directed advertising */
if (conn->role == HCI_ROLE_SLAVE) {
/* If we're active scanning most controllers are unable
* to initiate advertising. Simply reject the attempt.
*/
if (hci_dev_test_flag(hdev, HCI_LE_SCAN) &&
hdev->le_scan_type == LE_SCAN_ACTIVE) {
hci_req_purge(&req);
hci_conn_del(conn);
return ERR_PTR(-EBUSY);
}
hci_req_directed_advertising(&req, conn);
goto create_conn;
}
params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
if (params) {
conn->le_conn_min_interval = params->conn_min_interval;
conn->le_conn_max_interval = params->conn_max_interval;
conn->le_conn_latency = params->conn_latency;
conn->le_supv_timeout = params->supervision_timeout;
} else {
conn->le_conn_min_interval = hdev->le_conn_min_interval;
conn->le_conn_max_interval = hdev->le_conn_max_interval;
conn->le_conn_latency = hdev->le_conn_latency;
conn->le_supv_timeout = hdev->le_supv_timeout;
}
/* If controller is scanning, we stop it since some controllers are
* not able to scan and connect at the same time. Also set the
* HCI_LE_SCAN_INTERRUPTED flag so that the command complete
* handler for scan disabling knows to set the correct discovery
* state.
*/
if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
hci_req_add_le_scan_disable(&req, rpa_le_conn);
hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
}
hci_req_add_le_create_conn(&req, conn, direct_rpa);
conn->state = BT_CONNECT;
clear_bit(HCI_CONN_SCANNING, &conn->flags);
create_conn:
err = hci_req_run(&req, create_le_conn_complete);
err = hci_cmd_sync_queue(hdev, hci_connect_le_sync, conn,
create_le_conn_complete);
if (err) {
hci_conn_del(conn);
if (hdev->adv_instance_cnt)
hci_req_resume_adv_instances(hdev);
return ERR_PTR(err);
}
......
......@@ -5755,7 +5755,7 @@ static void hci_le_conn_update_complete_evt(struct hci_dev *hdev, void *data,
static struct hci_conn *check_pending_le_conn(struct hci_dev *hdev,
bdaddr_t *addr,
u8 addr_type, bool addr_resolved,
u8 adv_type, bdaddr_t *direct_rpa)
u8 adv_type)
{
struct hci_conn *conn;
struct hci_conn_params *params;
......@@ -5810,7 +5810,7 @@ static struct hci_conn *check_pending_le_conn(struct hci_dev *hdev,
conn = hci_connect_le(hdev, addr, addr_type, addr_resolved,
BT_SECURITY_LOW, hdev->def_le_autoconnect_timeout,
HCI_ROLE_MASTER, direct_rpa);
HCI_ROLE_MASTER);
if (!IS_ERR(conn)) {
/* If HCI_AUTO_CONN_EXPLICIT is set, conn is already owned
* by higher layer that tried to connect, if no then
......@@ -5933,7 +5933,7 @@ static void process_adv_report(struct hci_dev *hdev, u8 type, bdaddr_t *bdaddr,
* for advertising reports) and is already verified to be RPA above.
*/
conn = check_pending_le_conn(hdev, bdaddr, bdaddr_type, bdaddr_resolved,
type, direct_addr);
type);
if (!ext_adv && conn && type == LE_ADV_IND && len <= HCI_MAX_AD_LENGTH) {
/* Store report for later inclusion by
* mgmt_device_connected
......
......@@ -818,56 +818,6 @@ static void cancel_adv_timeout(struct hci_dev *hdev)
}
}
/* This function requires the caller holds hdev->lock */
void __hci_req_pause_adv_instances(struct hci_request *req)
{
bt_dev_dbg(req->hdev, "Pausing advertising instances");
/* Call to disable any advertisements active on the controller.
* This will succeed even if no advertisements are configured.
*/
__hci_req_disable_advertising(req);
/* If we are using software rotation, pause the loop */
if (!ext_adv_capable(req->hdev))
cancel_adv_timeout(req->hdev);
}
/* This function requires the caller holds hdev->lock */
static void __hci_req_resume_adv_instances(struct hci_request *req)
{
struct adv_info *adv;
bt_dev_dbg(req->hdev, "Resuming advertising instances");
if (ext_adv_capable(req->hdev)) {
/* Call for each tracked instance to be re-enabled */
list_for_each_entry(adv, &req->hdev->adv_instances, list) {
__hci_req_enable_ext_advertising(req,
adv->instance);
}
} else {
/* Schedule for most recent instance to be restarted and begin
* the software rotation loop
*/
__hci_req_schedule_adv_instance(req,
req->hdev->cur_adv_instance,
true);
}
}
/* This function requires the caller holds hdev->lock */
int hci_req_resume_adv_instances(struct hci_dev *hdev)
{
struct hci_request req;
hci_req_init(&req, hdev);
__hci_req_resume_adv_instances(&req);
return hci_req_run(&req, NULL);
}
static bool adv_cur_instance_is_scannable(struct hci_dev *hdev)
{
return hci_adv_instance_is_scannable(hdev, hdev->cur_adv_instance);
......
......@@ -80,8 +80,6 @@ void hci_req_add_le_passive_scan(struct hci_request *req);
void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next);
void hci_req_disable_address_resolution(struct hci_dev *hdev);
void __hci_req_pause_adv_instances(struct hci_request *req);
int hci_req_resume_adv_instances(struct hci_dev *hdev);
void hci_req_reenable_advertising(struct hci_dev *hdev);
void __hci_req_enable_advertising(struct hci_request *req);
void __hci_req_disable_advertising(struct hci_request *req);
......
......@@ -4999,3 +4999,280 @@ int hci_resume_sync(struct hci_dev *hdev)
return 0;
}
static bool conn_use_rpa(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
return hci_dev_test_flag(hdev, HCI_PRIVACY);
}
static int hci_le_ext_directed_advertising_sync(struct hci_dev *hdev,
struct hci_conn *conn)
{
struct hci_cp_le_set_ext_adv_params cp;
int err;
bdaddr_t random_addr;
u8 own_addr_type;
err = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn),
&own_addr_type);
if (err)
return err;
/* Set require_privacy to false so that the remote device has a
* chance of identifying us.
*/
err = hci_get_random_address(hdev, false, conn_use_rpa(conn), NULL,
&own_addr_type, &random_addr);
if (err)
return err;
memset(&cp, 0, sizeof(cp));
cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_DIRECT_IND);
cp.own_addr_type = own_addr_type;
cp.channel_map = hdev->le_adv_channel_map;
cp.tx_power = HCI_TX_POWER_INVALID;
cp.primary_phy = HCI_ADV_PHY_1M;
cp.secondary_phy = HCI_ADV_PHY_1M;
cp.handle = 0x00; /* Use instance 0 for directed adv */
cp.own_addr_type = own_addr_type;
cp.peer_addr_type = conn->dst_type;
bacpy(&cp.peer_addr, &conn->dst);
/* As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for
* advertising_event_property LE_LEGACY_ADV_DIRECT_IND
* does not supports advertising data when the advertising set already
* contains some, the controller shall return erroc code 'Invalid
* HCI Command Parameters(0x12).
* So it is required to remove adv set for handle 0x00. since we use
* instance 0 for directed adv.
*/
err = hci_remove_ext_adv_instance_sync(hdev, cp.handle, NULL);
if (err)
return err;
err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS,
sizeof(cp), &cp, HCI_CMD_TIMEOUT);
if (err)
return err;
/* Check if random address need to be updated */
if (own_addr_type == ADDR_LE_DEV_RANDOM &&
bacmp(&random_addr, BDADDR_ANY) &&
bacmp(&random_addr, &hdev->random_addr)) {
err = hci_set_adv_set_random_addr_sync(hdev, 0x00,
&random_addr);
if (err)
return err;
}
return hci_enable_ext_advertising_sync(hdev, 0x00);
}
static int hci_le_directed_advertising_sync(struct hci_dev *hdev,
struct hci_conn *conn)
{
struct hci_cp_le_set_adv_param cp;
u8 status;
u8 own_addr_type;
u8 enable;
if (ext_adv_capable(hdev))
return hci_le_ext_directed_advertising_sync(hdev, conn);
/* Clear the HCI_LE_ADV bit temporarily so that the
* hci_update_random_address knows that it's safe to go ahead
* and write a new random address. The flag will be set back on
* as soon as the SET_ADV_ENABLE HCI command completes.
*/
hci_dev_clear_flag(hdev, HCI_LE_ADV);
/* Set require_privacy to false so that the remote device has a
* chance of identifying us.
*/
status = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn),
&own_addr_type);
if (status)
return status;
memset(&cp, 0, sizeof(cp));
/* Some controllers might reject command if intervals are not
* within range for undirected advertising.
* BCM20702A0 is known to be affected by this.
*/
cp.min_interval = cpu_to_le16(0x0020);
cp.max_interval = cpu_to_le16(0x0020);
cp.type = LE_ADV_DIRECT_IND;
cp.own_address_type = own_addr_type;
cp.direct_addr_type = conn->dst_type;
bacpy(&cp.direct_addr, &conn->dst);
cp.channel_map = hdev->le_adv_channel_map;
status = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_PARAM,
sizeof(cp), &cp, HCI_CMD_TIMEOUT);
if (status)
return status;
enable = 0x01;
return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_ENABLE,
sizeof(enable), &enable, HCI_CMD_TIMEOUT);
}
static void set_ext_conn_params(struct hci_conn *conn,
struct hci_cp_le_ext_conn_param *p)
{
struct hci_dev *hdev = conn->hdev;
memset(p, 0, sizeof(*p));
p->scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
p->scan_window = cpu_to_le16(hdev->le_scan_window_connect);
p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
p->conn_latency = cpu_to_le16(conn->le_conn_latency);
p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
p->min_ce_len = cpu_to_le16(0x0000);
p->max_ce_len = cpu_to_le16(0x0000);
}
int hci_le_ext_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn,
u8 own_addr_type)
{
struct hci_cp_le_ext_create_conn *cp;
struct hci_cp_le_ext_conn_param *p;
u8 data[sizeof(*cp) + sizeof(*p) * 3];
u32 plen;
cp = (void *)data;
p = (void *)cp->data;
memset(cp, 0, sizeof(*cp));
bacpy(&cp->peer_addr, &conn->dst);
cp->peer_addr_type = conn->dst_type;
cp->own_addr_type = own_addr_type;
plen = sizeof(*cp);
if (scan_1m(hdev)) {
cp->phys |= LE_SCAN_PHY_1M;
set_ext_conn_params(conn, p);
p++;
plen += sizeof(*p);
}
if (scan_2m(hdev)) {
cp->phys |= LE_SCAN_PHY_2M;
set_ext_conn_params(conn, p);
p++;
plen += sizeof(*p);
}
if (scan_coded(hdev)) {
cp->phys |= LE_SCAN_PHY_CODED;
set_ext_conn_params(conn, p);
plen += sizeof(*p);
}
return __hci_cmd_sync_status(hdev, HCI_OP_LE_EXT_CREATE_CONN,
plen, data, HCI_CMD_TIMEOUT);
}
int hci_le_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn)
{
struct hci_cp_le_create_conn cp;
struct hci_conn_params *params;
u8 own_addr_type;
int err;
/* Disable advertising if we're active. For central role
* connections most controllers will refuse to connect if
* advertising is enabled, and for peripheral role connections we
* anyway have to disable it in order to start directed
* advertising. Any registered advertisements will be
* re-enabled after the connection attempt is finished.
*/
hci_pause_advertising_sync(hdev);
/* If requested to connect as peripheral use directed advertising */
if (conn->role == HCI_ROLE_SLAVE) {
/* If we're active scanning most controllers are unable
* to initiate advertising. Simply reject the attempt.
*/
if (hci_dev_test_flag(hdev, HCI_LE_SCAN) &&
hdev->le_scan_type == LE_SCAN_ACTIVE) {
hci_conn_del(conn);
return -EBUSY;
}
err = hci_le_directed_advertising_sync(hdev, conn);
goto done;
}
params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
if (params) {
conn->le_conn_min_interval = params->conn_min_interval;
conn->le_conn_max_interval = params->conn_max_interval;
conn->le_conn_latency = params->conn_latency;
conn->le_supv_timeout = params->supervision_timeout;
} else {
conn->le_conn_min_interval = hdev->le_conn_min_interval;
conn->le_conn_max_interval = hdev->le_conn_max_interval;
conn->le_conn_latency = hdev->le_conn_latency;
conn->le_supv_timeout = hdev->le_supv_timeout;
}
/* If controller is scanning, we stop it since some controllers are
* not able to scan and connect at the same time. Also set the
* HCI_LE_SCAN_INTERRUPTED flag so that the command complete
* handler for scan disabling knows to set the correct discovery
* state.
*/
if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
hci_scan_disable_sync(hdev);
hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
}
/* Update random address, but set require_privacy to false so
* that we never connect with an non-resolvable address.
*/
err = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn),
&own_addr_type);
if (err)
goto done;
if (use_ext_conn(hdev)) {
err = hci_le_ext_create_conn_sync(hdev, conn, own_addr_type);
goto done;
}
memset(&cp, 0, sizeof(cp));
cp.scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
cp.scan_window = cpu_to_le16(hdev->le_scan_window_connect);
bacpy(&cp.peer_addr, &conn->dst);
cp.peer_addr_type = conn->dst_type;
cp.own_address_type = own_addr_type;
cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
cp.min_ce_len = cpu_to_le16(0x0000);
cp.max_ce_len = cpu_to_le16(0x0000);
err = __hci_cmd_sync_status(hdev, HCI_OP_LE_CREATE_CONN,
sizeof(cp), &cp, HCI_CMD_TIMEOUT);
done:
hci_resume_advertising_sync(hdev);
return err;
}
......@@ -7905,7 +7905,7 @@ int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
hcon = hci_connect_le(hdev, dst, dst_type, false,
chan->sec_level,
HCI_LE_CONN_TIMEOUT,
HCI_ROLE_SLAVE, NULL);
HCI_ROLE_SLAVE);
else
hcon = hci_connect_le_scan(hdev, dst, dst_type,
chan->sec_level,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment