Merge branch 'next/mct-exynos' into next/clk-exynos

Conflicts:
	arch/arm/mach-exynos/mach-exynos4-dt.c

Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt

+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+  it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+  should be the order of the interrupts specified. The local timer interrupts
+  should be specified after the four global timer interrupts have been
+  specified.
+
+	0: Global Timer Interrupt 0
+	1: Global Timer Interrupt 1
+	2: Global Timer Interrupt 2
+	3: Global Timer Interrupt 3
+	4: Local Timer Interrupt 0
+	5: Local Timer Interrupt 1
+	6: ..
+	7: ..
+	i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+	   interrupt generated by MCT and the remaining three global timer
+	   interrupts are unused. Two local timer interrupts have been
+	   specified.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+			     <0 42 0>, <0 48 0>;
+	};
+
+Example 2: In this example, the MCT global and local timer interrupts are
+	   connected to two seperate interrupt controllers. Hence, an
+	   interrupt-map is created to map the interrupts to the respective
+	   interrupt controllers.
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};

arch/arm/Kconfig

@@ -1655,7 +1655,7 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP
 	default y
-	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
+	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system

arch/arm/boot/dts/exynos4210.dtsi

@@ -47,6 +47,28 @@ combiner:interrupt-controller@10440000 {
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};
 
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &gic 0 69 0>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 0 42 0>,
+					<0x5 0 &gic 0 48 0>;
+		};
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;

arch/arm/boot/dts/exynos4212.dtsi

@@ -25,4 +25,26 @@ / {
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4412.dtsi

@@ -25,4 +25,28 @@ / {
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>, <6 0>, <7 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>,
+					<0x6 0 &gic 1 12 0>,
+					<0x7 0 &gic 1 12 0>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5250.dtsi

@@ -79,6 +79,28 @@ combiner:interrupt-controller@10440000 {
 			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
 	};
 
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x1 0 &combiner 23 4>,
+					<0x2 0 &combiner 25 2>,
+					<0x3 0 &combiner 25 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};
+
 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x101D0000 0x100>;

arch/arm/mach-exynos/Kconfig

@@ -80,12 +80,6 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
-config EXYNOS4_MCT
-	bool
-	default y
-	help
-	  Use MCT (Multi Core Timer) as kernel timers
-
 config EXYNOS_DEV_DMA
 	bool
 	help
@@ -407,6 +401,7 @@ config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
+	select CLKSRC_OF
 	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
@@ -424,6 +419,7 @@ config MACH_EXYNOS5_DT
 	default y
 	depends on ARCH_EXYNOS5
 	select ARM_AMBA
+	select CLKSRC_OF
 	select USE_OF
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.

arch/arm/mach-exynos/Makefile

@@ -26,8 +26,6 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
-obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
-
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support

arch/arm/mach-exynos/common.c

@@ -256,11 +256,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSRAM,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSRAM),

arch/arm/mach-exynos/common.h

@@ -12,7 +12,7 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-extern void exynos4_timer_init(void);
+extern void mct_init(void);
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);

arch/arm/mach-exynos/include/mach/irqs.h

@@ -30,8 +30,6 @@
 
 /* For EXYNOS4 and EXYNOS5 */
 
-#define EXYNOS_IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
-
 #define EXYNOS_IRQ_EINT16_31		IRQ_SPI(32)
 
 /* For EXYNOS4 SoCs */
@@ -323,8 +321,6 @@
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
 
-#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -419,8 +415,6 @@
 #define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)
 
 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
 
 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)

arch/arm/mach-exynos/include/mach/map.h

@@ -65,7 +65,6 @@
 #define EXYNOS5_PA_CMU			0x10010000
 
 #define EXYNOS4_PA_SYSTIMER		0x10050000
-#define EXYNOS5_PA_SYSTIMER		0x101C0000
 
 #define EXYNOS4_PA_WATCHDOG		0x10060000
 #define EXYNOS5_PA_WATCHDOG		0x101D0000

arch/arm/mach-exynos/include/mach/regs-mct.h

-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x)		(S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT		EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L		EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U		EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR	EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON		EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT		EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK		(0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET		(0x00)
-#define MCT_L_ICNTB_OFFSET		(0x08)
-#define MCT_L_TCON_OFFSET		(0x20)
-#define MCT_L_INT_CSTAT_OFFSET		(0x30)
-#define MCT_L_INT_ENB_OFFSET		(0x34)
-#define MCT_L_WSTAT_OFFSET		(0x40)
-
-#define MCT_G_TCON_START		(1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC	(1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE		(1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE	(1 << 2)
-#define MCT_L_TCON_INT_START		(1 << 1)
-#define MCT_L_TCON_TIMER_START		(1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */

arch/arm/mach-exynos/mach-armlex4210.c

@@ -202,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-exynos4-dt.c

@@ -15,6 +15,7 @@
 #include <linux/of_fdt.h>
 #include <linux/serial_core.h>
 #include <linux/memblock.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
@@ -158,7 +159,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.map_io		= exynos4_dt_map_io,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= clocksource_of_init,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 	.reserve	= exynos4_reserve,

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -14,6 +14,7 @@
 #include <linux/serial_core.h>
 #include <linux/memblock.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
@@ -217,7 +218,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos5_dt_map_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= clocksource_of_init,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,

arch/arm/mach-exynos/mach-nuri.c

@@ -1380,7 +1380,7 @@ MACHINE_START(NURI, "NURI")
 	.map_io		= nuri_map_io,
 	.init_machine	= nuri_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve        = &nuri_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-origen.c

@@ -815,7 +815,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.map_io		= origen_map_io,
 	.init_machine	= origen_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve	= &origen_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -376,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END
@@ -390,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.map_io		= smdk4x12_map_io,
 	.init_machine	= smdk4x12_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.restart	= exynos4_restart,
 	.reserve	= &smdk4x12_reserve,
 MACHINE_END

arch/arm/mach-exynos/mach-smdkv310.c

@@ -423,7 +423,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
@@ -436,7 +436,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= mct_init,
 	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

drivers/clocksource/Kconfig

@@ -67,3 +67,8 @@ config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help
 	  This option enables support for the Meta per-thread timers.
+
+config CLKSRC_EXYNOS_MCT
+	def_bool y if ARCH_EXYNOS
+	help
+	  Support for Multi Core Timer controller on Exynos SoCs.

drivers/clocksource/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
 obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
+obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o

arch/arm/mach-exynos/mct.c → drivers/clocksource/exynos_mct.c

@@ -20,6 +20,9 @@
 #include <linux/delay.h>
 #include <linux/percpu.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clocksource.h>
 
 #include <asm/arch_timer.h>
 #include <asm/localtimer.h>
@@ -28,9 +31,36 @@
 
 #include <mach/map.h>
 #include <mach/irqs.h>
-#include <mach/regs-mct.h>
 #include <asm/mach/time.h>
 
+#define EXYNOS4_MCTREG(x)		(x)
+#define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT		EXYNOS4_MCTREG(0x110)
+#define EXYNOS4_MCT_G_COMP0_L		EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U		EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR	EXYNOS4_MCTREG(0x208)
+#define EXYNOS4_MCT_G_TCON		EXYNOS4_MCTREG(0x240)
+#define EXYNOS4_MCT_G_INT_CSTAT		EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
+#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK		(0xffffff00)
+
+#define MCT_L_TCNTB_OFFSET		(0x00)
+#define MCT_L_ICNTB_OFFSET		(0x08)
+#define MCT_L_TCON_OFFSET		(0x20)
+#define MCT_L_INT_CSTAT_OFFSET		(0x30)
+#define MCT_L_INT_ENB_OFFSET		(0x34)
+#define MCT_L_WSTAT_OFFSET		(0x40)
+#define MCT_G_TCON_START		(1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC	(1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE		(1 << 0)
+#define MCT_L_TCON_INTERVAL_MODE	(1 << 2)
+#define MCT_L_TCON_INT_START		(1 << 1)
+#define MCT_L_TCON_TIMER_START		(1 << 0)
+
 #define TICK_BASE_CNT	1
 
 enum {
@@ -38,64 +68,75 @@ enum {
 	MCT_INT_PPI
 };
 
+enum {
+	MCT_G0_IRQ,
+	MCT_G1_IRQ,
+	MCT_G2_IRQ,
+	MCT_G3_IRQ,
+	MCT_L0_IRQ,
+	MCT_L1_IRQ,
+	MCT_L2_IRQ,
+	MCT_L3_IRQ,
+	MCT_NR_IRQS,
+};
+
+static void __iomem *reg_base;
 static unsigned long clk_rate;
 static unsigned int mct_int_type;
+static int mct_irqs[MCT_NR_IRQS];
 
 struct mct_clock_event_device {
 	struct clock_event_device *evt;
-	void __iomem *base;
+	unsigned long base;
 	char name[10];
 };
 
-static void exynos4_mct_write(unsigned int value, void *addr)
+static void exynos4_mct_write(unsigned int value, unsigned long offset)
 {
-	void __iomem *stat_addr;
+	unsigned long stat_addr;
 	u32 mask;
 	u32 i;
 
-	__raw_writel(value, addr);
+	__raw_writel(value, reg_base + offset);
 
-	if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
-		u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
-		switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
-		case (u32) MCT_L_TCON_OFFSET:
-			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+	if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
+		stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+		switch (offset & EXYNOS4_MCT_L_MASK) {
+		case MCT_L_TCON_OFFSET:
 			mask = 1 << 3;		/* L_TCON write status */
 			break;
-		case (u32) MCT_L_ICNTB_OFFSET:
-			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+		case MCT_L_ICNTB_OFFSET:
 			mask = 1 << 1;		/* L_ICNTB write status */
 			break;
-		case (u32) MCT_L_TCNTB_OFFSET:
-			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+		case MCT_L_TCNTB_OFFSET:
 			mask = 1 << 0;		/* L_TCNTB write status */
 			break;
 		default:
 			return;
 		}
 	} else {
-		switch ((u32) addr) {
-		case (u32) EXYNOS4_MCT_G_TCON:
+		switch (offset) {
+		case EXYNOS4_MCT_G_TCON:
 			stat_addr = EXYNOS4_MCT_G_WSTAT;
 			mask = 1 << 16;		/* G_TCON write status */
 			break;
-		case (u32) EXYNOS4_MCT_G_COMP0_L:
+		case EXYNOS4_MCT_G_COMP0_L:
 			stat_addr = EXYNOS4_MCT_G_WSTAT;
 			mask = 1 << 0;		/* G_COMP0_L write status */
 			break;
-		case (u32) EXYNOS4_MCT_G_COMP0_U:
+		case EXYNOS4_MCT_G_COMP0_U:
 			stat_addr = EXYNOS4_MCT_G_WSTAT;
 			mask = 1 << 1;		/* G_COMP0_U write status */
 			break;
-		case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+		case EXYNOS4_MCT_G_COMP0_ADD_INCR:
 			stat_addr = EXYNOS4_MCT_G_WSTAT;
 			mask = 1 << 2;		/* G_COMP0_ADD_INCR w status */
 			break;
-		case (u32) EXYNOS4_MCT_G_CNT_L:
+		case EXYNOS4_MCT_G_CNT_L:
 			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
 			mask = 1 << 0;		/* G_CNT_L write status */
 			break;
-		case (u32) EXYNOS4_MCT_G_CNT_U:
+		case EXYNOS4_MCT_G_CNT_U:
 			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
 			mask = 1 << 1;		/* G_CNT_U write status */
 			break;
@@ -106,12 +147,12 @@ static void exynos4_mct_write(unsigned int value, void *addr)
 
 	/* Wait maximum 1 ms until written values are applied */
 	for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
-		if (__raw_readl(stat_addr) & mask) {
-			__raw_writel(mask, stat_addr);
+		if (__raw_readl(reg_base + stat_addr) & mask) {
+			__raw_writel(mask, reg_base + stat_addr);
 			return;
 		}
 
-	panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
+	panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
 }
 
 /* Clocksource handling */
@@ -122,7 +163,7 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo)
 	exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
 	exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
 
-	reg = __raw_readl(EXYNOS4_MCT_G_TCON);
+	reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
 	reg |= MCT_G_TCON_START;
 	exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
 }
@@ -130,12 +171,12 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo)
 static cycle_t exynos4_frc_read(struct clocksource *cs)
 {
 	unsigned int lo, hi;
-	u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+	u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
 
 	do {
 		hi = hi2;
-		lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
-		hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+		lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
+		hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
 	} while (hi != hi2);
 
 	return ((cycle_t)hi << 32) | lo;
@@ -167,7 +208,7 @@ static void exynos4_mct_comp0_stop(void)
 {
 	unsigned int tcon;
 
-	tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+	tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
 	tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
 
 	exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
@@ -180,7 +221,7 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode,
 	unsigned int tcon;
 	cycle_t comp_cycle;
 
-	tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+	tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
 
 	if (mode == CLOCK_EVT_MODE_PERIODIC) {
 		tcon |= MCT_G_TCON_COMP0_AUTO_INC;
@@ -257,11 +298,7 @@ static void exynos4_clockevent_init(void)
 	mct_comp_device.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&mct_comp_device, clk_rate,
 					0xf, 0xffffffff);
-
-	if (soc_is_exynos5250())
-		setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
-	else
-		setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
+	setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
@@ -273,12 +310,12 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 {
 	unsigned long tmp;
 	unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
-	void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
+	unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
 
-	tmp = __raw_readl(addr);
+	tmp = __raw_readl(reg_base + offset);
 	if (tmp & mask) {
 		tmp &= ~mask;
-		exynos4_mct_write(tmp, addr);
+		exynos4_mct_write(tmp, offset);
 	}
 }
 
@@ -297,7 +334,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
 	/* enable MCT tick interrupt */
 	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
 
-	tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
+	tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
 	tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
 	       MCT_L_TCON_INTERVAL_MODE;
 	exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
@@ -349,7 +386,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
-	if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+	if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
 		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
 		return 1;
 	} else {
@@ -385,7 +422,6 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt;
 	unsigned int cpu = smp_processor_id();
-	int mct_lx_irq;
 
 	mevt = this_cpu_ptr(&percpu_mct_tick);
 	mevt->evt = evt;
@@ -406,21 +442,17 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {
-			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
-						EXYNOS5_IRQ_MCT_L0;
 			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = mct_lx_irq;
-			setup_irq(mct_lx_irq, &mct_tick0_event_irq);
+			evt->irq = mct_irqs[MCT_L0_IRQ];
+			setup_irq(evt->irq, &mct_tick0_event_irq);
 		} else {
-			mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
-						EXYNOS5_IRQ_MCT_L1;
 			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = mct_lx_irq;
-			setup_irq(mct_lx_irq, &mct_tick1_event_irq);
-			irq_set_affinity(mct_lx_irq, cpumask_of(1));
+			evt->irq = mct_irqs[MCT_L1_IRQ];
+			setup_irq(evt->irq, &mct_tick1_event_irq);
+			irq_set_affinity(evt->irq, cpumask_of(1));
 		}
 	} else {
-		enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
+		enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
 	}
 
 	return 0;
@@ -436,7 +468,7 @@ static void exynos4_local_timer_stop(struct clock_event_device *evt)
 		else
 			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
-		disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
+		disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
 }
 
 static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
@@ -445,41 +477,74 @@ static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
 };
 #endif /* CONFIG_LOCAL_TIMERS */
 
-static void __init exynos4_timer_resources(void)
+static void __init exynos4_timer_resources(struct device_node *np)
 {
 	struct clk *mct_clk;
 	mct_clk = clk_get(NULL, "xtal");
 
 	clk_rate = clk_get_rate(mct_clk);
 
+	reg_base = np ? of_iomap(np, 0) : S5P_VA_SYSTIMER;
+	if (!reg_base)
+		panic("%s: unable to ioremap mct address space\n", __func__);
+
 #ifdef CONFIG_LOCAL_TIMERS
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
-		err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
+		err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
 					 exynos4_mct_tick_isr, "MCT",
 					 &percpu_mct_tick);
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
-		     EXYNOS_IRQ_MCT_LOCALTIMER, err);
+		     mct_irqs[MCT_L0_IRQ], err);
 	}
 
 	local_timer_register(&exynos4_mct_tick_ops);
 #endif /* CONFIG_LOCAL_TIMERS */
 }
 
-void __init exynos4_timer_init(void)
+static const struct of_device_id exynos_mct_ids[] = {
+	{ .compatible = "samsung,exynos4210-mct", .data = (void *)MCT_INT_SPI },
+	{ .compatible = "samsung,exynos4412-mct", .data = (void *)MCT_INT_PPI },
+};
+
+void __init mct_init(void)
 {
-	if (soc_is_exynos5440()) {
-		arch_timer_of_register();
-		return;
-	}
+	struct device_node *np = NULL;
+	const struct of_device_id *match;
+	u32 nr_irqs, i;
+
+#ifdef CONFIG_OF
+	np = of_find_matching_node_and_match(NULL, exynos_mct_ids, &match);
+#endif
+	if (np) {
+		mct_int_type = (u32)(match->data);
 
-	if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
+		/* This driver uses only one global timer interrupt */
+		mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+
+		/*
+		 * Find out the number of local irqs specified. The local
+		 * timer irqs are specified after the four global timer
+		 * irqs are specified.
+		 */
+#ifdef CONFIG_OF
+		nr_irqs = of_irq_count(np);
+#endif
+		for (i = MCT_L0_IRQ; i < nr_irqs; i++)
+			mct_irqs[i] = irq_of_parse_and_map(np, i);
+	} else if (soc_is_exynos4210()) {
+		mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
+		mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0;
+		mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1;
 		mct_int_type = MCT_INT_SPI;
-	else
-		mct_int_type = MCT_INT_PPI;
+	} else {
+		panic("unable to determine mct controller type\n");
+	}
 
-	exynos4_timer_resources();
+	exynos4_timer_resources(np);
 	exynos4_clocksource_init();
 	exynos4_clockevent_init();
 }
+CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init)
+CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init)