Merge tag 'socfpga_dts_updates_for_v5.19' of...

Merge tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/late

SoCFPGA dts updates for v5.19
- dtschema fix SPI NOR node
- correct dt-bindings doc for Altera gpio driver
- add support for n6000 Agilex platform and dt-bindings documentation

* tag 'socfpga_dts_updates_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: intel: add device tree for n6000
  dt-bindings: intel: add binding for Intel n6000
  dt-bindings: soc: add bindings for Intel HPS Copy Engine
  dt-bindings: gpio: altera: correct interrupt-cells
  ARM: dts: socfpga: align SPI NOR node name with dtschema

Link: https://lore.kernel.org/r/20220519232317.16079-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/intel,socfpga.yaml

@@ -18,6 +18,7 @@ properties:
         items:
           - enum:
               - intel,n5x-socdk
+              - intel,socfpga-agilex-n6000
               - intel,socfpga-agilex-socdk
           - const: intel,socfpga-agilex
 

Documentation/devicetree/bindings/gpio/gpio-altera.txt

@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };

Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022, Intel Corporation
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel HPS Copy Engine
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+description: |
+  The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy
+  a bootable image from host memory to HPS DDR.  Additionally, there is a
+  register the HPS can use to indicate the state of booting the copied image as
+  well as a keep-a-live indication to the host.
+
+properties:
+  compatible:
+    const: intel,hps-copy-engine
+
+  '#dma-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@80000000 {
+        compatible = "simple-bus";
+        reg = <0x80000000 0x60000000>,
+              <0xf9000000 0x00100000>;
+        reg-names = "axi_h2f", "axi_h2f_lw";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+        dma-controller@0 {
+            compatible = "intel,hps-copy-engine";
+            reg = <0x00000000 0x00000000 0x00001000>;
+            #dma-cells = <1>;
+        };
+    };

arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts

@@ -9,7 +9,7 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";

arch/arm/boot/dts/socfpga_cyclone5_socdk.dts

@@ -121,7 +121,7 @@ &mmc0 {
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";

arch/arm/boot/dts/socfpga_cyclone5_sodia.dts

@@ -113,7 +113,7 @@ &usb1 {
 &qspi {
 	status = "okay";
 
-	flash0: n25q512a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q512a", "jedec,spi-nor";

arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts

@@ -221,7 +221,7 @@ at24@50 {
 &qspi {
 	status = "okay";
 
-	n25q128@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128", "jedec,spi-nor";
@@ -238,7 +238,7 @@ n25q128@0 {
 		cdns,tslch-ns = <4>;
 	};
 
-	n25q00@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";

arch/arm64/boot/dts/intel/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_socdk.dtb \
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
+				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_nand.dtb \
 				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb

arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex n6000";
+	compatible = "intel,socfpga-agilex-n6000", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	soc {
+		bus@80000000 {
+			compatible = "simple-bus";
+			reg = <0x80000000 0x60000000>,
+				<0xf9000000 0x00100000>;
+			reg-names = "axi_h2f", "axi_h2f_lw";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+			dma-controller@0 {
+				compatible = "intel,hps-copy-engine";
+				reg = <0x00000000 0x00000000 0x00001000>;
+				#dma-cells = <1>;
+			};
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&fpga_mgr {
+	status = "disabled";
+};