Commit 8fa38513 authored by James Smart's avatar James Smart Committed by James Bottomley

[SCSI] lpfc 8.3.4: Various SLI4 fixes

Various SLI4 fixes

- Fix switch name not used in the FCF record for FCoE HBAs
- Enabled HBA UE error polling error-condition action code
- Rewrite lpfc_sli4_scmd_to_wqidx_distr() to handle counter rollover cleanly
- Modify resume_rpi mailbox data structure to match current SLI4 spec
- Do not issue mailbox command in MBX_POLL mode when LPFC_HBA_ERROR is set
- Wait for HBA POST completion before checking Online and UE registers
- Fix accumulated total length not being filled in on unsolicited IOCBs
- Use PCI config space register to determine SLI rev of HBA
- Turn on starting ELS tmo function timer during device initialization
Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent 66d6faec
......@@ -616,6 +616,8 @@ struct lpfc_hba {
uint32_t hbq_count; /* Count of configured HBQs */
struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
uint32_t fcp_qidx; /* next work queue to post work to */
unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */
unsigned long pci_bar1_map; /* Physical address for PCI BAR1 */
unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */
......
......@@ -1053,6 +1053,39 @@ lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
return 0;
}
/**
* lpfc_sw_name_match - Check if the fcf switch name match.
* @fab_name: pointer to fabric name.
* @new_fcf_record: pointer to fcf record.
*
* This routine compare the fcf record's switch name with provided
* switch name. If the switch name are identical this function
* returns 1 else return 0.
**/
static uint32_t
lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record)
{
if ((sw_name[0] ==
bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record)) &&
(sw_name[1] ==
bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record)) &&
(sw_name[2] ==
bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record)) &&
(sw_name[3] ==
bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record)) &&
(sw_name[4] ==
bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record)) &&
(sw_name[5] ==
bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record)) &&
(sw_name[6] ==
bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record)) &&
(sw_name[7] ==
bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record)))
return 1;
else
return 0;
}
/**
* lpfc_mac_addr_match - Check if the fcf mac address match.
* @phba: pointer to lpfc hba data structure.
......@@ -1123,6 +1156,22 @@ lpfc_copy_fcf_record(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
phba->fcf.fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
phba->fcf.priority = new_fcf_record->fip_priority;
phba->fcf.switch_name[0] =
bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record);
phba->fcf.switch_name[1] =
bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record);
phba->fcf.switch_name[2] =
bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record);
phba->fcf.switch_name[3] =
bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record);
phba->fcf.switch_name[4] =
bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record);
phba->fcf.switch_name[5] =
bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record);
phba->fcf.switch_name[6] =
bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record);
phba->fcf.switch_name[7] =
bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record);
}
/**
......@@ -1241,7 +1290,10 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
!lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
new_fcf_record))
continue;
if ((conn_entry->conn_rec.flags & FCFCNCT_SWNM_VALID) &&
!lpfc_sw_name_match(conn_entry->conn_rec.switch_name,
new_fcf_record))
continue;
if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
/*
* If the vlan bit map does not have the bit set for the
......@@ -1425,6 +1477,8 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
if (phba->fcf.fcf_flag & FCF_IN_USE) {
if (lpfc_fab_name_match(phba->fcf.fabric_name,
new_fcf_record) &&
lpfc_sw_name_match(phba->fcf.switch_name,
new_fcf_record) &&
lpfc_mac_addr_match(phba, new_fcf_record)) {
phba->fcf.fcf_flag |= FCF_AVAILABLE;
spin_unlock_irqrestore(&phba->hbalock, flags);
......@@ -1464,9 +1518,9 @@ lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
* If there is a record with lower priority value for
* the current FCF, use that record.
*/
if (lpfc_fab_name_match(phba->fcf.fabric_name, new_fcf_record)
&& (new_fcf_record->fip_priority <
phba->fcf.priority)) {
if (lpfc_fab_name_match(phba->fcf.fabric_name,
new_fcf_record) &&
(new_fcf_record->fip_priority < phba->fcf.priority)) {
/* Use this FCF record */
lpfc_copy_fcf_record(phba, new_fcf_record);
phba->fcf.addr_mode = addr_mode;
......
......@@ -52,6 +52,31 @@ struct dma_address {
uint32_t addr_hi;
};
#define LPFC_SLIREV_CONF_WORD 0x58
struct lpfc_sli_intf {
uint32_t word0;
#define lpfc_sli_intf_iftype_MASK 0x00000007
#define lpfc_sli_intf_iftype_SHIFT 0
#define lpfc_sli_intf_iftype_WORD word0
#define lpfc_sli_intf_rev_MASK 0x0000000f
#define lpfc_sli_intf_rev_SHIFT 4
#define lpfc_sli_intf_rev_WORD word0
#define LPFC_SLIREV_CONF_SLI4 4
#define lpfc_sli_intf_family_MASK 0x000000ff
#define lpfc_sli_intf_family_SHIFT 8
#define lpfc_sli_intf_family_WORD word0
#define lpfc_sli_intf_feat1_MASK 0x000000ff
#define lpfc_sli_intf_feat1_SHIFT 16
#define lpfc_sli_intf_feat1_WORD word0
#define lpfc_sli_intf_feat2_MASK 0x0000001f
#define lpfc_sli_intf_feat2_SHIFT 24
#define lpfc_sli_intf_feat2_WORD word0
#define lpfc_sli_intf_valid_MASK 0x00000007
#define lpfc_sli_intf_valid_SHIFT 29
#define lpfc_sli_intf_valid_WORD word0
#define LPFC_SLI_INTF_VALID 6
};
#define LPFC_SLI4_BAR0 1
#define LPFC_SLI4_BAR1 2
#define LPFC_SLI4_BAR2 4
......@@ -1181,6 +1206,32 @@ struct fcf_record {
#define lpfc_fcf_record_fcf_state_MASK 0x0000FFFF
#define lpfc_fcf_record_fcf_state_WORD word8
uint8_t vlan_bitmap[512];
uint32_t word137;
#define lpfc_fcf_record_switch_name_0_SHIFT 0
#define lpfc_fcf_record_switch_name_0_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_0_WORD word137
#define lpfc_fcf_record_switch_name_1_SHIFT 8
#define lpfc_fcf_record_switch_name_1_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_1_WORD word137
#define lpfc_fcf_record_switch_name_2_SHIFT 16
#define lpfc_fcf_record_switch_name_2_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_2_WORD word137
#define lpfc_fcf_record_switch_name_3_SHIFT 24
#define lpfc_fcf_record_switch_name_3_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_3_WORD word137
uint32_t word138;
#define lpfc_fcf_record_switch_name_4_SHIFT 0
#define lpfc_fcf_record_switch_name_4_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_4_WORD word138
#define lpfc_fcf_record_switch_name_5_SHIFT 8
#define lpfc_fcf_record_switch_name_5_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_5_WORD word138
#define lpfc_fcf_record_switch_name_6_SHIFT 16
#define lpfc_fcf_record_switch_name_6_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_6_WORD word138
#define lpfc_fcf_record_switch_name_7_SHIFT 24
#define lpfc_fcf_record_switch_name_7_MASK 0x000000FF
#define lpfc_fcf_record_switch_name_7_WORD word138
};
struct lpfc_mbx_read_fcf_tbl {
......@@ -1385,20 +1436,17 @@ struct lpfc_mbx_unreg_vfi {
struct lpfc_mbx_resume_rpi {
uint32_t word1;
#define lpfc_resume_rpi_rpi_SHIFT 0
#define lpfc_resume_rpi_rpi_MASK 0x0000FFFF
#define lpfc_resume_rpi_rpi_WORD word1
#define lpfc_resume_rpi_index_SHIFT 0
#define lpfc_resume_rpi_index_MASK 0x0000FFFF
#define lpfc_resume_rpi_index_WORD word1
#define lpfc_resume_rpi_ii_SHIFT 30
#define lpfc_resume_rpi_ii_MASK 0x00000003
#define lpfc_resume_rpi_ii_WORD word1
#define RESUME_INDEX_RPI 0
#define RESUME_INDEX_VPI 1
#define RESUME_INDEX_VFI 2
#define RESUME_INDEX_FCFI 3
uint32_t event_tag;
uint32_t word3_rsvd;
uint32_t word4_rsvd;
uint32_t word5_rsvd;
uint32_t word6;
#define lpfc_resume_rpi_vpi_SHIFT 0
#define lpfc_resume_rpi_vpi_MASK 0x0000FFFF
#define lpfc_resume_rpi_vpi_WORD word6
#define lpfc_resume_rpi_vfi_SHIFT 16
#define lpfc_resume_rpi_vfi_MASK 0x0000FFFF
#define lpfc_resume_rpi_vfi_WORD word6
};
#define REG_FCF_INVALID_QID 0xFFFF
......
......@@ -4488,23 +4488,6 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
if (!phba->sli4_hba.STAregaddr)
return -ENODEV;
/* With uncoverable error, log the error message and return error */
onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
if (uerrlo_reg.word0 || uerrhi_reg.word0) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1422 HBA Unrecoverable error: "
"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
"online0_reg=0x%x, online1_reg=0x%x\n",
uerrlo_reg.word0, uerrhi_reg.word0,
onlnreg0, onlnreg1);
}
return -ENODEV;
}
/* Wait up to 30 seconds for the SLI Port POST done and ready */
for (i = 0; i < 3000; i++) {
sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
......@@ -4544,6 +4527,23 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba)
bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
/* With uncoverable error, log the error message and return error */
onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
if (uerrlo_reg.word0 || uerrhi_reg.word0) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1422 HBA Unrecoverable error: "
"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
"online0_reg=0x%x, online1_reg=0x%x\n",
uerrlo_reg.word0, uerrhi_reg.word0,
onlnreg0, onlnreg1);
}
return -ENODEV;
}
return port_error;
}
......@@ -7635,19 +7635,17 @@ static int __devinit
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
{
int rc;
uint16_t dev_id;
struct lpfc_sli_intf intf;
if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
if (pci_read_config_dword(pdev, LPFC_SLIREV_CONF_WORD, &intf.word0))
return -ENODEV;
switch (dev_id) {
case PCI_DEVICE_ID_TIGERSHARK:
if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) &&
(bf_get(lpfc_sli_intf_rev, &intf) == LPFC_SLIREV_CONF_SLI4))
rc = lpfc_pci_probe_one_s4(pdev, pid);
break;
default:
else
rc = lpfc_pci_probe_one_s3(pdev, pid);
break;
}
return rc;
}
......
......@@ -1938,9 +1938,7 @@ lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
memset(mbox, 0, sizeof(*mbox));
resume_rpi = &mbox->u.mqe.un.resume_rpi;
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI);
bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi);
bf_set(lpfc_resume_rpi_vpi, resume_rpi,
ndlp->vport->vpi + ndlp->vport->phba->vpi_base);
bf_set(lpfc_resume_rpi_vfi, resume_rpi,
ndlp->vport->vfi + ndlp->vport->phba->vfi_base);
bf_set(lpfc_resume_rpi_index, resume_rpi, ndlp->nlp_rpi);
bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI);
resume_rpi->event_tag = ndlp->phba->fc_eventTag;
}
......@@ -4522,12 +4522,8 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
lpfc_sli4_rb_setup(phba);
/* Start the ELS watchdog timer */
/*
* The driver for SLI4 is not yet ready to process timeouts
* or interrupts. Once it is, the comment bars can be removed.
*/
/* mod_timer(&vport->els_tmofunc,
* jiffies + HZ * (phba->fc_ratov*2)); */
mod_timer(&vport->els_tmofunc,
jiffies + HZ * (phba->fc_ratov * 2));
/* Start heart beat timer */
mod_timer(&phba->hb_tmofunc,
......@@ -5279,6 +5275,18 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
unsigned long iflags;
int rc;
rc = lpfc_mbox_dev_check(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):2544 Mailbox command x%x (x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
lpfc_sli4_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
/* Detect polling mode and jump to a handler */
if (!phba->sli4_hba.intr_enable) {
if (flag == MBX_POLL)
......@@ -5338,17 +5346,6 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
psli->sli_flag, flag);
goto out_not_finished;
}
rc = lpfc_mbox_dev_check(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):2544 Mailbox command x%x (x%x) "
"cannot issue Data: x%x x%x\n",
mboxq->vport ? mboxq->vport->vpi : 0,
mboxq->u.mb.mbxCommand,
lpfc_sli4_mbox_opcode_get(phba, mboxq),
psli->sli_flag, flag);
goto out_not_finished;
}
/* Put the mailbox command to the driver internal FIFO */
psli->slistat.mbox_busy++;
......@@ -5817,19 +5814,21 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
/**
* lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
* @phba: Pointer to HBA context object.
* @piocb: Pointer to command iocb.
*
* This routine performs a round robin SCSI command to SLI4 FCP WQ index
* distribution.
* distribution. This is called by __lpfc_sli_issue_iocb_s4() with the hbalock
* held.
*
* Return: index into SLI4 fast-path FCP queue index.
**/
static uint32_t
lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba)
{
static uint32_t fcp_qidx;
++phba->fcp_qidx;
if (phba->fcp_qidx >= phba->cfg_fcp_wq_count)
phba->fcp_qidx = 0;
return fcp_qidx++ % phba->cfg_fcp_wq_count;
return phba->fcp_qidx;
}
/**
......@@ -6156,7 +6155,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
return IOCB_ERROR;
if (piocb->iocb_flag & LPFC_IO_FCP) {
fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba, piocb);
fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba);
if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
return IOCB_ERROR;
} else {
......@@ -7678,12 +7677,6 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
"online0_reg=0x%x, online1_reg=0x%x\n",
uerr_sta_lo, uerr_sta_hi,
onlnreg0, onlnreg1);
/* TEMP: as the driver error recover logic is not
* fully developed, we just log the error message
* and the device error attention action is now
* temporarily disabled.
*/
return 0;
phba->work_status[0] = uerr_sta_lo;
phba->work_status[1] = uerr_sta_hi;
/* Set the driver HA work bitmap */
......@@ -9499,7 +9492,6 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
eq->host_index = 0;
eq->hba_index = 0;
if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
return status;
}
......@@ -9604,9 +9596,8 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
cq->host_index = 0;
cq->hba_index = 0;
out:
if (rc != MBX_TIMEOUT)
out:
mempool_free(mbox, phba->mbox_mem_pool);
return status;
}
......@@ -9712,7 +9703,6 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
/* link the mq onto the parent cq child list */
list_add_tail(&mq->list, &cq->child_list);
out:
if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
return status;
}
......@@ -9795,7 +9785,6 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
/* link the wq onto the parent cq child list */
list_add_tail(&wq->list, &cq->child_list);
out:
if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
return status;
}
......@@ -9970,7 +9959,6 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
list_add_tail(&drq->list, &cq->child_list);
out:
if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
return status;
}
......@@ -10026,7 +10014,6 @@ lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
/* Remove eq from any list */
list_del_init(&eq->list);
if (rc != MBX_TIMEOUT)
mempool_free(mbox, eq->phba->mbox_mem_pool);
return status;
}
......@@ -10080,7 +10067,6 @@ lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
}
/* Remove cq from any list */
list_del_init(&cq->list);
if (rc != MBX_TIMEOUT)
mempool_free(mbox, cq->phba->mbox_mem_pool);
return status;
}
......@@ -10134,7 +10120,6 @@ lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
}
/* Remove mq from any list */
list_del_init(&mq->list);
if (rc != MBX_TIMEOUT)
mempool_free(mbox, mq->phba->mbox_mem_pool);
return status;
}
......@@ -10187,7 +10172,6 @@ lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
}
/* Remove wq from any list */
list_del_init(&wq->list);
if (rc != MBX_TIMEOUT)
mempool_free(mbox, wq->phba->mbox_mem_pool);
return status;
}
......@@ -10258,7 +10242,6 @@ lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
}
list_del_init(&hrq->list);
list_del_init(&drq->list);
if (rc != MBX_TIMEOUT)
mempool_free(mbox, hrq->phba->mbox_mem_pool);
return status;
}
......@@ -10933,6 +10916,7 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
first_iocbq = lpfc_sli_get_iocbq(vport->phba);
if (first_iocbq) {
/* Initialize the first IOCB. */
first_iocbq->iocb.unsli3.rcvsli3.acc_len = 0;
first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id);
......@@ -10945,6 +10929,8 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
first_iocbq->iocb.un.cont64[0].tus.f.bdeSize =
LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.un.rcvels.remoteID = sid;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
bf_get(lpfc_rcqe_length, &seq_dmabuf->rcqe);
}
iocbq = first_iocbq;
/*
......@@ -10961,6 +10947,8 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
iocbq->iocb.ulpBdeCount++;
iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
bf_get(lpfc_rcqe_length, &seq_dmabuf->rcqe);
} else {
iocbq = lpfc_sli_get_iocbq(vport->phba);
if (!iocbq) {
......@@ -10978,6 +10966,8 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
iocbq->iocb.ulpBdeCount = 1;
iocbq->iocb.un.cont64[0].tus.f.bdeSize =
LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
bf_get(lpfc_rcqe_length, &seq_dmabuf->rcqe);
iocbq->iocb.un.rcvels.remoteID = sid;
list_add_tail(&iocbq->list, &first_iocbq->list);
}
......
......@@ -132,6 +132,7 @@ struct lpfc_sli4_link {
struct lpfc_fcf {
uint8_t fabric_name[8];
uint8_t switch_name[8];
uint8_t mac_addr[6];
uint16_t fcf_indx;
uint16_t fcfi;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment