Merge branch 'for-upstream' of...

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-08-01

Here's our first batch of Bluetooth patches for the 4.14 kernel:

 - Several new USB IDs for the btusb driver
 - Memory leak fix in btusb driver
 - Cleanups & fixes to hci_nokia, hci_serdev and hci_bcm drivers
 - Fixed cleanup path in mrf24j40 (802.15.4) driver probe function
 - A few other smaller cleanups & fixes to drivers

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/bluetooth/Kconfig

@@ -98,6 +98,7 @@ config BT_HCIUART_NOKIA
 	depends on BT_HCIUART_SERDEV
 	depends on PM
 	select BT_HCIUART_H4
+	select BT_BCM
 	help
 	  Nokia H4+ is serial protocol for communication between Bluetooth
 	  device and host. This protocol is required for Bluetooth devices

drivers/bluetooth/ath3k.c

@@ -140,7 +140,8 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
 
 #define BTUSB_ATH3012		0x80
 /* This table is to load patch and sysconfig files
- * for AR3012 */
+ * for AR3012
+ */
 static const struct usb_device_id ath3k_blist_tbl[] = {
 
 	/* Atheros AR3012 with sflash firmware*/

drivers/bluetooth/bt3c_cs.c

@@ -684,14 +684,16 @@ static int bt3c_config(struct pcmcia_device *link)
 	unsigned long try;
 
 	/* First pass: look for a config entry that looks normal.
-	   Two tries: without IO aliases, then with aliases */
+	 * Two tries: without IO aliases, then with aliases
+	 */
 	for (try = 0; try < 2; try++)
 		if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
 			goto found_port;
 
 	/* Second pass: try to find an entry that isn't picky about
-	   its base address, then try to grab any standard serial port
-	   address, and finally try to get any free port. */
+	 * its base address, then try to grab any standard serial port
+	 * address, and finally try to get any free port.
+	 */
 	if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
 		goto found_port;
 

drivers/bluetooth/btmrvl_sdio.c

@@ -1455,7 +1455,8 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
 	fw_dump_ptr = fw_dump_data;
 
 	/* Dump all the memory data into single file, a userspace script will
-	   be used to split all the memory data to multiple files*/
+	 * be used to split all the memory data to multiple files
+	 */
 	BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start");
 	for (idx = 0; idx < dump_num; idx++) {
 		struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
@@ -1482,7 +1483,8 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
 	}
 
 	/* fw_dump_data will be free in device coredump release function
-	   after 5 min*/
+	 * after 5 min
+	 */
 	dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
 	BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
 }

drivers/bluetooth/btrtl.c

@@ -279,6 +279,8 @@ static int rtl_load_config(struct hci_dev *hdev, const char *name, u8 **buff)
 		return ret;
 	ret = fw->size;
 	*buff = kmemdup(fw->data, ret, GFP_KERNEL);
+	if (!*buff)
+		ret = -ENOMEM;
 
 	release_firmware(fw);
 

drivers/bluetooth/btsdio.c

@@ -144,7 +144,8 @@ static int btsdio_rx_packet(struct btsdio_data *data)
 	if (!skb) {
 		/* Out of memory. Prepare a read retry and just
 		 * return with the expectation that the next time
-		 * we're called we'll have more memory. */
+		 * we're called we'll have more memory.
+		 */
 		return -ENOMEM;
 	}
 

drivers/bluetooth/btuart_cs.c

@@ -614,14 +614,16 @@ static int btuart_config(struct pcmcia_device *link)
 	int try;
 
 	/* First pass: look for a config entry that looks normal.
-	   Two tries: without IO aliases, then with aliases */
+	 * Two tries: without IO aliases, then with aliases
+	 */
 	for (try = 0; try < 2; try++)
 		if (!pcmcia_loop_config(link, btuart_check_config, &try))
 			goto found_port;
 
 	/* Second pass: try to find an entry that isn't picky about
-	   its base address, then try to grab any standard serial port
-	   address, and finally try to get any free port. */
+	 * its base address, then try to grab any standard serial port
+	 * address, and finally try to get any free port.
+	 */
 	if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
 		goto found_port;
 

drivers/bluetooth/btusb.c

@@ -131,7 +131,8 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Broadcom BCM43142A0 (Foxconn/Lenovo) */
-	{ USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Broadcom BCM920703 (HTC Vive) */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
@@ -268,6 +269,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
@@ -656,7 +658,8 @@ static void btusb_intr_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -745,7 +748,8 @@ static void btusb_bulk_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -840,7 +844,8 @@ static void btusb_isoc_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -952,7 +957,8 @@ static void btusb_diag_complete(struct urb *urb)
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
 		/* -EPERM: urb is being killed;
-		 * -ENODEV: device got disconnected */
+		 * -ENODEV: device got disconnected
+		 */
 		if (err != -EPERM && err != -ENODEV)
 			BT_ERR("%s urb %p failed to resubmit (%d)",
 			       hdev->name, urb, -err);
@@ -2896,7 +2902,8 @@ static int btusb_probe(struct usb_interface *intf,
 		struct usb_device *udev = interface_to_usbdev(intf);
 
 		/* Old firmware would otherwise let ath3k driver load
-		 * patch and sysconfig files */
+		 * patch and sysconfig files
+		 */
 		if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
 			return -ENODEV;
 	}
@@ -3067,6 +3074,12 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_QCA_ROME) {
 		data->setup_on_usb = btusb_setup_qca;
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+
+		/* QCA Rome devices lose their updated firmware over suspend,
+		 * but the USB hub doesn't notice any status change.
+		 * Explicitly request a device reset on resume.
+		 */
+		set_bit(BTUSB_RESET_RESUME, &data->flags);
 	}
 
 #ifdef CONFIG_BT_HCIBTUSB_RTL
@@ -3259,13 +3272,28 @@ static void play_deferred(struct btusb_data *data)
 	int err;
 
 	while ((urb = usb_get_from_anchor(&data->deferred))) {
+		usb_anchor_urb(urb, &data->tx_anchor);
+
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err < 0)
+		if (err < 0) {
+			if (err != -EPERM && err != -ENODEV)
+				BT_ERR("%s urb %p submission failed (%d)",
+				       data->hdev->name, urb, -err);
+			kfree(urb->setup_packet);
+			usb_unanchor_urb(urb);
+			usb_free_urb(urb);
 			break;
+		}
 
 		data->tx_in_flight++;
+		usb_free_urb(urb);
+	}
+
+	/* Cleanup the rest deferred urbs. */
+	while ((urb = usb_get_from_anchor(&data->deferred))) {
+		kfree(urb->setup_packet);
+		usb_free_urb(urb);
 	}
-	usb_scuttle_anchored_urbs(&data->deferred);
 }
 
 static int btusb_resume(struct usb_interface *intf)

drivers/bluetooth/btwilink.c

@@ -93,8 +93,7 @@ static void st_reg_completion_cb(void *priv_data, int data)
 	complete(&lhst->wait_reg_completion);
 }
 
-/* Called by Shared Transport layer when receive data is
- * available */
+/* Called by Shared Transport layer when receive data is available */
 static long st_receive(void *priv_data, struct sk_buff *skb)
 {
 	struct ti_st *lhst = priv_data;
@@ -198,7 +197,8 @@ static int ti_st_open(struct hci_dev *hdev)
 		}
 
 		/* Is ST registration callback
-		 * called with ERROR status? */
+		 * called with ERROR status?
+		 */
 		if (hst->reg_status != 0) {
 			BT_ERR("ST registration completed with invalid "
 					"status %d", hst->reg_status);
@@ -276,7 +276,7 @@ static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 
 static int bt_ti_probe(struct platform_device *pdev)
 {
-	static struct ti_st *hst;
+	struct ti_st *hst;
 	struct hci_dev *hdev;
 	int err;
 

drivers/bluetooth/hci_bcm.c

@@ -176,7 +176,7 @@ static irqreturn_t bcm_host_wake(int irq, void *data)
 static int bcm_request_irq(struct bcm_data *bcm)
 {
 	struct bcm_device *bdev = bcm->dev;
-	int err = 0;
+	int err;
 
 	/* If this is not a platform device, do not enable PM functionalities */
 	mutex_lock(&bcm_device_lock);
@@ -185,10 +185,13 @@ static int bcm_request_irq(struct bcm_data *bcm)
 		goto unlock;
 	}
 
-	if (bdev->irq > 0) {
-		err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
-				       bcm_host_wake, IRQF_TRIGGER_RISING,
-				       "host_wake", bdev);
+	if (bdev->irq <= 0) {
+		err = -EOPNOTSUPP;
+		goto unlock;
+	}
+
+	err = devm_request_irq(&bdev->pdev->dev, bdev->irq, bcm_host_wake,
+			       IRQF_TRIGGER_RISING, "host_wake", bdev);
 	if (err)
 		goto unlock;
 
@@ -199,7 +202,6 @@ static int bcm_request_irq(struct bcm_data *bcm)
 	pm_runtime_use_autosuspend(&bdev->pdev->dev);
 	pm_runtime_set_active(&bdev->pdev->dev);
 	pm_runtime_enable(&bdev->pdev->dev);
-	}
 
 unlock:
 	mutex_unlock(&bcm_device_lock);

drivers/bluetooth/hci_h4.c

@@ -172,7 +172,7 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
 			    const struct h4_recv_pkt *pkts, int pkts_count)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
-	u8 alignment = hu->alignment;
+	u8 alignment = hu->alignment ? hu->alignment : 1;
 
 	while (count) {
 		int i, len;

drivers/bluetooth/hci_ldisc.c

@@ -457,7 +457,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	BT_DBG("tty %p", tty);
 
 	/* Error if the tty has no write op instead of leaving an exploitable
-	   hole */
+	 * hole
+	 */
 	if (tty->ops->write == NULL)
 		return -EOPNOTSUPP;
 

drivers/bluetooth/hci_ll.c

@@ -622,7 +622,8 @@ static int download_firmware(struct ll_device *lldev)
 			cmd = (struct hci_command *)action_ptr;
 			if (cmd->opcode == 0xff36) {
 				/* ignore remote change
-				 * baud rate HCI VS command */
+				 * baud rate HCI VS command
+				 */
 				bt_dev_warn(lldev->hu.hdev, "change remote baud rate command in firmware");
 				break;
 			}
@@ -742,14 +743,8 @@ static int hci_ti_probe(struct serdev_device *serdev)
 static void hci_ti_remove(struct serdev_device *serdev)
 {
 	struct ll_device *lldev = serdev_device_get_drvdata(serdev);
-	struct hci_uart *hu = &lldev->hu;
-	struct hci_dev *hdev = hu->hdev;
-
-	cancel_work_sync(&hu->write_work);
 
-	hci_unregister_dev(hdev);
-	hci_free_dev(hdev);
-	hu->proto->close(hu);
+	hci_uart_unregister_device(&lldev->hu);
 }
 
 static const struct of_device_id hci_ti_of_match[] = {

drivers/bluetooth/hci_nokia.c

@@ -767,16 +767,8 @@ static int nokia_bluetooth_serdev_probe(struct serdev_device *serdev)
 static void nokia_bluetooth_serdev_remove(struct serdev_device *serdev)
 {
 	struct nokia_bt_dev *btdev = serdev_device_get_drvdata(serdev);
-	struct hci_uart *hu = &btdev->hu;
-	struct hci_dev *hdev = hu->hdev;
 
-	cancel_work_sync(&hu->write_work);
-
-	hci_unregister_dev(hdev);
-	hci_free_dev(hdev);
-	hu->proto->close(hu);
-
-	pm_runtime_disable(&btdev->serdev->dev);
+	hci_uart_unregister_device(&btdev->hu);
 }
 
 static int nokia_bluetooth_runtime_suspend(struct device *dev)

drivers/bluetooth/hci_serdev.c

@@ -354,3 +354,16 @@ int hci_uart_register_device(struct hci_uart *hu,
 	return err;
 }
 EXPORT_SYMBOL_GPL(hci_uart_register_device);
+
+void hci_uart_unregister_device(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+
+	cancel_work_sync(&hu->write_work);
+
+	hu->proto->close(hu);
+}
+EXPORT_SYMBOL_GPL(hci_uart_unregister_device);

drivers/bluetooth/hci_uart.h

@@ -112,6 +112,7 @@ struct hci_uart {
 int hci_uart_register_proto(const struct hci_uart_proto *p);
 int hci_uart_unregister_proto(const struct hci_uart_proto *p);
 int hci_uart_register_device(struct hci_uart *hu, const struct hci_uart_proto *p);
+void hci_uart_unregister_device(struct hci_uart *hu);
 
 int hci_uart_tx_wakeup(struct hci_uart *hu);
 int hci_uart_init_ready(struct hci_uart *hu);

drivers/net/ieee802154/mrf24j40.c

@@ -1330,7 +1330,8 @@ static int mrf24j40_probe(struct spi_device *spi)
 	if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) {
 		dev_warn(&spi->dev, "spi clock above possible maximum: %d",
 			 MAX_SPI_SPEED_HZ);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_register_device;
 	}
 
 	ret = mrf24j40_hw_init(devrec);