Skip to content

L
linux
Commit 90ccde4c authored by Linus Walleij's avatar Linus Walleij
Browse files
Options

ARM: ux500: bump MMC/SD max frequency for DT boots 

In patch:
"ARM: ux500: Enable 100MHz for SD/SDIO/MMC devices"
the max frequency for the MMC/SD/SDIO adapters was
increased from 50 to 100MHz. Do the same for the
device tree boot path.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Gabriel Fernandez <gabriel.fernandez.st@gmail.com>
Acked-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 8afff9ca
Show whitespace changes
Inline Side-by-side
Showing with 11 additions and 11 deletions
arch/arm/boot/dts/ccu9540.dts
View file @ 90ccde4c
...@@ -52,7 +52,7 @@ sdi0_per1@80126000 { ...@@ -52,7 +52,7 @@ sdi0_per1@80126000 {
// WLAN SDIO channel // WLAN SDIO channel
sdi1_per2@80118000 { sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <4>; bus-width = <4>;
status = "okay"; status = "okay";
......
arch/arm/boot/dts/href.dtsi
View file @ 90ccde4c
...@@ -108,7 +108,7 @@ bh1780@0x29 { ...@@ -108,7 +108,7 @@ bh1780@0x29 {
// External Micro SD slot // External Micro SD slot
sdi0_per1@80126000 { sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <4>; bus-width = <4>;
mmc-cap-sd-highspeed; mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
...@@ -123,7 +123,7 @@ sdi0_per1@80126000 { ...@@ -123,7 +123,7 @@ sdi0_per1@80126000 {
// WLAN SDIO channel // WLAN SDIO channel
sdi1_per2@80118000 { sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <4>; bus-width = <4>;
status = "okay"; status = "okay";
...@@ -132,7 +132,7 @@ sdi1_per2@80118000 { ...@@ -132,7 +132,7 @@ sdi1_per2@80118000 {
// PoP:ed eMMC // PoP:ed eMMC
sdi2_per3@80005000 { sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <8>; bus-width = <8>;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
...@@ -142,7 +142,7 @@ sdi2_per3@80005000 { ...@@ -142,7 +142,7 @@ sdi2_per3@80005000 {
// On-board eMMC // On-board eMMC
sdi4_per2@80114000 { sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <8>; bus-width = <8>;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>; vmmc-supply = <&ab8500_ldo_aux2_reg>;
......
arch/arm/boot/dts/hrefv60plus.dts
View file @ 90ccde4c
...@@ -34,7 +34,7 @@ bu21013_tp@0x5c { ...@@ -34,7 +34,7 @@ bu21013_tp@0x5c {
// External Micro SD slot // External Micro SD slot
sdi0_per1@80126000 { sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <4>; bus-width = <4>;
mmc-cap-sd-highspeed; mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
...@@ -48,7 +48,7 @@ sdi0_per1@80126000 { ...@@ -48,7 +48,7 @@ sdi0_per1@80126000 {
// WLAN SDIO channel // WLAN SDIO channel
sdi1_per2@80118000 { sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <4>; bus-width = <4>;
status = "okay"; status = "okay";
...@@ -57,7 +57,7 @@ sdi1_per2@80118000 { ...@@ -57,7 +57,7 @@ sdi1_per2@80118000 {
// PoP:ed eMMC // PoP:ed eMMC
sdi2_per3@80005000 { sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <8>; bus-width = <8>;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
...@@ -67,7 +67,7 @@ sdi2_per3@80005000 { ...@@ -67,7 +67,7 @@ sdi2_per3@80005000 {
// On-board eMMC // On-board eMMC
sdi4_per2@80114000 { sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <8>; bus-width = <8>;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>; vmmc-supply = <&ab8500_ldo_aux2_reg>;
......
arch/arm/boot/dts/snowball.dts
View file @ 90ccde4c
...@@ -129,7 +129,7 @@ vmmci: regulator-gpio { ...@@ -129,7 +129,7 @@ vmmci: regulator-gpio {
// External Micro SD slot // External Micro SD slot
sdi0_per1@80126000 { sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <4>; bus-width = <4>;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>; vmmc-supply = <&ab8500_ldo_aux3_reg>;
...@@ -144,7 +144,7 @@ sdi0_per1@80126000 { ...@@ -144,7 +144,7 @@ sdi0_per1@80126000 {
// On-board eMMC // On-board eMMC
sdi4_per2@80114000 { sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>; arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>; max-frequency = <100000000>;
bus-width = <8>; bus-width = <8>;
mmc-cap-mmc-highspeed; mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>; vmmc-supply = <&ab8500_ldo_aux2_reg>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7