[media] Terratec Cinergy Hybrid T USB XS

I found that the problems people have reported with the USB-TV-stick
"Terratec Cinergy Hybrid T USB XS" (USB-ID: 0ccd:0042)
are coming from a wrong header file in the v4l-sources.

Attached is a diff, which fixes the problem (tested successfully here).
Obviously the USB-ID has been associated with a wrong chip: EM2880
instead of EM2882, which would be correct.
Reported-by: Philippe Bourdin <richel@AngieBecker.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/em28xx/em28xx-cards.c

@@ -1496,7 +1496,7 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
-		.name         = "Terratec Hybrid XS (em2882)",
+		.name         = "Terratec Cinnergy Hybrid T USB XS (em2882)",
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
@@ -1820,7 +1820,7 @@ struct usb_device_id em28xx_id_table[] = {
 	{ USB_DEVICE(0x0ccd, 0x005e),
 			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0042),
-			.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
+			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0043),
 			.driver_info = EM2870_BOARD_TERRATEC_XS },
 	{ USB_DEVICE(0x0ccd, 0x0047),