[PATCH] ppc64: cputable cleanup, from Dave Engebretsen:

From: Anton Blanchard <anton@samba.org>

Formatting cleanup, fix for firmware_features init, use cpu_features
to display processor names.

arch/ppc64/kernel/chrp_setup.c

@@ -285,9 +285,11 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
 			int i, hypertas_len;
 			/* check value against table of strings */
 			for(i=0; i < FIRMWARE_MAX_FEATURES ;i++) {
-		    if ((firmware_features_table[i].name) && (strcmp(firmware_features_table[i].name,hypertas))==0) {
+				if ((firmware_features_table[i].name) &&
+				    (strcmp(firmware_features_table[i].name,hypertas))==0) {
 					/* we have a match */
-			cur_cpu_spec->firmware_features |= (1UL << firmware_features_table[i].val);
+					cur_cpu_spec->firmware_features |= 
+						(firmware_features_table[i].val);
 					break;
 				} 
 			}
@@ -296,8 +298,9 @@ chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
 			hypertas+= hypertas_len +1;
 		}
 	}
+
 	of_node_put(dn);
-	udbg_printf("firmware_features bitmask: 0x%x \n",
+	printk(KERN_INFO "firmware_features = 0x%lx\n", 
 	       cur_cpu_spec->firmware_features);
 }
 

arch/ppc64/kernel/setup.c

@@ -137,7 +137,7 @@ void __init disable_early_printk(void)
 }
 
 /*
- * Do some initial setup of the system.  The paramters are those which 
+ * Do some initial setup of the system.  The parameters are those which 
  * were passed in from the bootloader.
  */
 void setup_system(unsigned long r3, unsigned long r4, unsigned long r5,
@@ -277,35 +277,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "processor\t: %lu\n", cpu_id);
 	seq_printf(m, "cpu\t\t: ");
 
-	switch (PVR_VER(pvr)) {
-	case PV_NORTHSTAR:
-		seq_printf(m, "RS64-II (northstar)\n");
-		break;
-	case PV_PULSAR:
-		seq_printf(m, "RS64-III (pulsar)\n");
-		break;
-	case PV_POWER4:
-		seq_printf(m, "POWER4 (gp)\n");
-		break;
-	case PV_ICESTAR:
-		seq_printf(m, "RS64-III (icestar)\n");
-		break;
-	case PV_SSTAR:
-		seq_printf(m, "RS64-IV (sstar)\n");
-		break;
-	case PV_POWER4p:
-		seq_printf(m, "POWER4+ (gq)\n");
-		break;
-	case PV_630:
-		seq_printf(m, "POWER3 (630)\n");
-		break;
-	case PV_630p:
-		seq_printf(m, "POWER3 (630+)\n");
-		break;
-	default:
-		seq_printf(m, "Unknown (%08x)\n", pvr);
-		break;
-	}
+	if (cur_cpu_spec->pvr_mask)
+		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
+	else
+		seq_printf(m, "unknown (%08x)", pvr);
+
+	seq_printf(m, "\n");
 
 	/*
 	 * Assume here that all clock rates are the same in a
@@ -354,7 +331,8 @@ struct seq_operations cpuinfo_op = {
 };
 
 /*
- * Fetch the cmd_line from open firmware. */
+ * Fetch the cmd_line from open firmware. 
+ */
 void parse_cmd_line(unsigned long r3, unsigned long r4, unsigned long r5,
 		  unsigned long r6, unsigned long r7)
 {