Commit 9245ac20 authored by Zhang Rui's avatar Zhang Rui

Merge branches 'thermal-core', 'thermal-intel', 'thermal-soc-fixes' and 'thermal-reorg' into next

......@@ -22,10 +22,13 @@ Required properties:
TSADC controller.
- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend.
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
Optional properties:
- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO.
- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW
1:HIGH.
- rockchip,grf : The phandle of the syscon node for the general register file.
Exiample:
tsadc: tsadc@ff280000 {
......
......@@ -177,8 +177,10 @@ config THERMAL_EMULATION
config HISI_THERMAL
tristate "Hisilicon thermal driver"
depends on (ARCH_HISI && CPU_THERMAL && OF) || COMPILE_TEST
depends on ARCH_HISI || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
default y
help
Enable this to plug hisilicon's thermal sensor driver into the Linux
thermal framework. cpufreq is used as the cooling device to throttle
......
......@@ -3,7 +3,8 @@
#
obj-$(CONFIG_THERMAL) += thermal_sys.o
thermal_sys-y += thermal_core.o
thermal_sys-y += thermal_core.o thermal_sysfs.o \
thermal_helpers.o
# interface to/from other layers providing sensors
thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o
......
......@@ -512,6 +512,7 @@ static const struct of_device_id db8500_thermal_match[] = {
{ .compatible = "stericsson,db8500-thermal" },
{},
};
MODULE_DEVICE_TABLE(of, db8500_thermal_match);
#endif
static struct platform_driver db8500_thermal_driver = {
......
......@@ -238,7 +238,7 @@ get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq)
return 0;
}
return dfc->power_ops->get_static_power(voltage);
return dfc->power_ops->get_static_power(df, voltage);
}
/**
......@@ -262,7 +262,8 @@ get_dynamic_power(struct devfreq_cooling_device *dfc, unsigned long freq,
struct devfreq_cooling_power *dfc_power = dfc->power_ops;
if (dfc_power->get_dynamic_power)
return dfc_power->get_dynamic_power(freq, voltage);
return dfc_power->get_dynamic_power(dfc->devfreq, freq,
voltage);
freq_mhz = freq / 1000000;
power = (u64)dfc_power->dyn_power_coeff * freq_mhz * voltage * voltage;
......
......@@ -29,6 +29,7 @@
#define PCH_THERMAL_DID_HSW_2 0x8C24 /* Haswell PCH */
#define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */
#define PCH_THERMAL_DID_SKL 0x9D31 /* Skylake PCH */
#define PCH_THERMAL_DID_SKL_H 0xA131 /* Skylake PCH 100 series */
/* Wildcat Point-LP PCH Thermal registers */
#define WPT_TEMP 0x0000 /* Temperature */
......@@ -273,37 +274,44 @@ static struct thermal_zone_device_ops tzd_ops = {
.get_trip_temp = pch_get_trip_temp,
};
enum board_ids {
board_hsw,
board_wpt,
board_skl,
};
static const struct board_info {
const char *name;
const struct pch_dev_ops *ops;
} board_info[] = {
[board_hsw] = {
.name = "pch_haswell",
.ops = &pch_dev_ops_wpt,
},
[board_wpt] = {
.name = "pch_wildcat_point",
.ops = &pch_dev_ops_wpt,
},
[board_skl] = {
.name = "pch_skylake",
.ops = &pch_dev_ops_wpt,
},
};
static int intel_pch_thermal_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
enum board_ids board_id = id->driver_data;
const struct board_info *bi = &board_info[board_id];
struct pch_thermal_device *ptd;
int err;
int nr_trips;
char *dev_name;
ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL);
if (!ptd)
return -ENOMEM;
switch (pdev->device) {
case PCH_THERMAL_DID_WPT:
ptd->ops = &pch_dev_ops_wpt;
dev_name = "pch_wildcat_point";
break;
case PCH_THERMAL_DID_SKL:
ptd->ops = &pch_dev_ops_wpt;
dev_name = "pch_skylake";
break;
case PCH_THERMAL_DID_HSW_1:
case PCH_THERMAL_DID_HSW_2:
ptd->ops = &pch_dev_ops_wpt;
dev_name = "pch_haswell";
break;
default:
dev_err(&pdev->dev, "unknown pch thermal device\n");
return -ENODEV;
}
ptd->ops = bi->ops;
pci_set_drvdata(pdev, ptd);
ptd->pdev = pdev;
......@@ -331,11 +339,11 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev,
if (err)
goto error_cleanup;
ptd->tzd = thermal_zone_device_register(dev_name, nr_trips, 0, ptd,
ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd,
&tzd_ops, NULL, 0, 0);
if (IS_ERR(ptd->tzd)) {
dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
dev_name);
bi->name);
err = PTR_ERR(ptd->tzd);
goto error_cleanup;
}
......@@ -380,10 +388,16 @@ static int intel_pch_thermal_resume(struct device *device)
}
static struct pci_device_id intel_pch_thermal_id[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1),
.driver_data = board_hsw, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2),
.driver_data = board_hsw, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT),
.driver_data = board_wpt, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL),
.driver_data = board_skl, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H),
.driver_data = board_skl, },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
......
......@@ -149,6 +149,7 @@ static struct platform_device_id max77620_thermal_devtype[] = {
{ .name = "max77620-thermal", },
{},
};
MODULE_DEVICE_TABLE(platform, max77620_thermal_devtype);
static struct platform_driver max77620_thermal_driver = {
.driver = {
......
......@@ -200,7 +200,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
struct qpnp_tm_chip *chip;
struct device_node *node;
u8 type, subtype;
u32 res[2];
u32 res;
int ret, irq;
node = pdev->dev.of_node;
......@@ -215,7 +215,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
if (!chip->map)
return -ENXIO;
ret = of_property_read_u32_array(node, "reg", res, 2);
ret = of_property_read_u32(node, "reg", &res);
if (ret < 0)
return ret;
......@@ -228,7 +228,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
if (PTR_ERR(chip->adc) == -EPROBE_DEFER)
return PTR_ERR(chip->adc);
chip->base = res[0];
chip->base = res;
ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
if (ret < 0) {
......
......@@ -524,11 +524,6 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs,
regs + TSADCV2_AUTO_PERIOD_HT);
writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
if (IS_ERR(grf)) {
pr_warn("%s: Missing rockchip,grf property\n", __func__);
return;
}
}
/**
......@@ -971,6 +966,8 @@ static int rockchip_configure_from_dt(struct device *dev,
* need this property.
*/
thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
if (IS_ERR(thermal->grf))
dev_warn(dev, "Missing rockchip,grf property\n");
return 0;
}
......
......@@ -107,6 +107,7 @@ static const struct of_device_id tango_sensor_ids[] = {
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, tango_sensor_ids);
static struct platform_driver tango_thermal_driver = {
.probe = tango_thermal_probe,
......
......@@ -5,22 +5,9 @@
* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
......@@ -64,6 +51,13 @@ static atomic_t in_suspend;
static struct thermal_governor *def_governor;
/*
* Governor section: set of functions to handle thermal governors
*
* Functions to help in the life cycle of thermal governors within
* the thermal core and by the thermal governor code.
*/
static struct thermal_governor *__find_governor(const char *name)
{
struct thermal_governor *pos;
......@@ -142,11 +136,16 @@ int thermal_register_governor(struct thermal_governor *governor)
mutex_lock(&thermal_governor_lock);
err = -EBUSY;
if (__find_governor(governor->name) == NULL) {
if (!__find_governor(governor->name)) {
bool match_default;
err = 0;
list_add(&governor->governor_list, &thermal_governor_list);
if (!def_governor && !strncmp(governor->name,
DEFAULT_THERMAL_GOVERNOR, THERMAL_NAME_LENGTH))
match_default = !strncmp(governor->name,
DEFAULT_THERMAL_GOVERNOR,
THERMAL_NAME_LENGTH);
if (!def_governor && match_default)
def_governor = governor;
}
......@@ -188,7 +187,7 @@ void thermal_unregister_governor(struct thermal_governor *governor)
mutex_lock(&thermal_governor_lock);
if (__find_governor(governor->name) == NULL)
if (!__find_governor(governor->name))
goto exit;
mutex_lock(&thermal_list_lock);
......@@ -203,195 +202,92 @@ void thermal_unregister_governor(struct thermal_governor *governor)
list_del(&governor->governor_list);
exit:
mutex_unlock(&thermal_governor_lock);
return;
}
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int ret;
if (lock)
mutex_lock(lock);
ret = idr_alloc(idr, NULL, 0, 0, GFP_KERNEL);
if (lock)
mutex_unlock(lock);
if (unlikely(ret < 0))
return ret;
*id = ret;
return 0;
}
static void release_idr(struct idr *idr, struct mutex *lock, int id)
{
if (lock)
mutex_lock(lock);
idr_remove(idr, id);
if (lock)
mutex_unlock(lock);
}
int get_tz_trend(struct thermal_zone_device *tz, int trip)
{
enum thermal_trend trend;
if (tz->emul_temperature || !tz->ops->get_trend ||
tz->ops->get_trend(tz, trip, &trend)) {
if (tz->temperature > tz->last_temperature)
trend = THERMAL_TREND_RAISING;
else if (tz->temperature < tz->last_temperature)
trend = THERMAL_TREND_DROPPING;
else
trend = THERMAL_TREND_STABLE;
}
return trend;
}
EXPORT_SYMBOL(get_tz_trend);
struct thermal_instance *get_thermal_instance(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int trip)
int thermal_zone_device_set_policy(struct thermal_zone_device *tz,
char *policy)
{
struct thermal_instance *pos = NULL;
struct thermal_instance *target_instance = NULL;
struct thermal_governor *gov;
int ret = -EINVAL;
mutex_lock(&thermal_governor_lock);
mutex_lock(&tz->lock);
mutex_lock(&cdev->lock);
list_for_each_entry(pos, &tz->thermal_instances, tz_node) {
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
target_instance = pos;
break;
}
}
gov = __find_governor(strim(policy));
if (!gov)
goto exit;
mutex_unlock(&cdev->lock);
mutex_unlock(&tz->lock);
ret = thermal_set_governor(tz, gov);
return target_instance;
}
EXPORT_SYMBOL(get_thermal_instance);
exit:
mutex_unlock(&tz->lock);
mutex_unlock(&thermal_governor_lock);
static void print_bind_err_msg(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int ret)
{
dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n",
tz->type, cdev->type, ret);
return ret;
}
static void __bind(struct thermal_zone_device *tz, int mask,
struct thermal_cooling_device *cdev,
unsigned long *limits,
unsigned int weight)
int thermal_build_list_of_policies(char *buf)
{
int i, ret;
struct thermal_governor *pos;
ssize_t count = 0;
ssize_t size = PAGE_SIZE;
for (i = 0; i < tz->trips; i++) {
if (mask & (1 << i)) {
unsigned long upper, lower;
mutex_lock(&thermal_governor_lock);
upper = THERMAL_NO_LIMIT;
lower = THERMAL_NO_LIMIT;
if (limits) {
lower = limits[i * 2];
upper = limits[i * 2 + 1];
}
ret = thermal_zone_bind_cooling_device(tz, i, cdev,
upper, lower,
weight);
if (ret)
print_bind_err_msg(tz, cdev, ret);
}
list_for_each_entry(pos, &thermal_governor_list, governor_list) {
size = PAGE_SIZE - count;
count += scnprintf(buf + count, size, "%s ", pos->name);
}
}
count += scnprintf(buf + count, size, "\n");
static void __unbind(struct thermal_zone_device *tz, int mask,
struct thermal_cooling_device *cdev)
{
int i;
mutex_unlock(&thermal_governor_lock);
for (i = 0; i < tz->trips; i++)
if (mask & (1 << i))
thermal_zone_unbind_cooling_device(tz, i, cdev);
return count;
}
static void bind_cdev(struct thermal_cooling_device *cdev)
static int __init thermal_register_governors(void)
{
int i, ret;
const struct thermal_zone_params *tzp;
struct thermal_zone_device *pos = NULL;
mutex_lock(&thermal_list_lock);
int result;
list_for_each_entry(pos, &thermal_tz_list, node) {
if (!pos->tzp && !pos->ops->bind)
continue;
result = thermal_gov_step_wise_register();
if (result)
return result;
if (pos->ops->bind) {
ret = pos->ops->bind(pos, cdev);
if (ret)
print_bind_err_msg(pos, cdev, ret);
continue;
}
result = thermal_gov_fair_share_register();
if (result)
return result;
tzp = pos->tzp;
if (!tzp || !tzp->tbp)
continue;
result = thermal_gov_bang_bang_register();
if (result)
return result;
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
continue;
if (tzp->tbp[i].match(pos, cdev))
continue;
tzp->tbp[i].cdev = cdev;
__bind(pos, tzp->tbp[i].trip_mask, cdev,
tzp->tbp[i].binding_limits,
tzp->tbp[i].weight);
}
}
result = thermal_gov_user_space_register();
if (result)
return result;
mutex_unlock(&thermal_list_lock);
return thermal_gov_power_allocator_register();
}
static void bind_tz(struct thermal_zone_device *tz)
static void thermal_unregister_governors(void)
{
int i, ret;
struct thermal_cooling_device *pos = NULL;
const struct thermal_zone_params *tzp = tz->tzp;
if (!tzp && !tz->ops->bind)
return;
mutex_lock(&thermal_list_lock);
/* If there is ops->bind, try to use ops->bind */
if (tz->ops->bind) {
list_for_each_entry(pos, &thermal_cdev_list, node) {
ret = tz->ops->bind(tz, pos);
if (ret)
print_bind_err_msg(tz, pos, ret);
}
goto exit;
}
if (!tzp || !tzp->tbp)
goto exit;
list_for_each_entry(pos, &thermal_cdev_list, node) {
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
continue;
if (tzp->tbp[i].match(tz, pos))
continue;
tzp->tbp[i].cdev = pos;
__bind(tz, tzp->tbp[i].trip_mask, pos,
tzp->tbp[i].binding_limits,
tzp->tbp[i].weight);
}
}
exit:
mutex_unlock(&thermal_list_lock);
thermal_gov_step_wise_unregister();
thermal_gov_fair_share_unregister();
thermal_gov_bang_bang_unregister();
thermal_gov_user_space_unregister();
thermal_gov_power_allocator_unregister();
}
/*
* Zone update section: main control loop applied to each zone while monitoring
*
* in polling mode. The monitoring is done using a workqueue.
* Same update may be done on a zone by calling thermal_zone_device_update().
*
* An update means:
* - Non-critical trips will invoke the governor responsible for that zone;
* - Hot trips will produce a notification to userspace;
* - Critical trip point will cause a system shutdown.
*/
static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
int delay)
{
......@@ -420,7 +316,8 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz)
}
static void handle_non_critical_trips(struct thermal_zone_device *tz,
int trip, enum thermal_trip_type trip_type)
int trip,
enum thermal_trip_type trip_type)
{
tz->governor ? tz->governor->throttle(tz, trip) :
def_governor->throttle(tz, trip);
......@@ -471,105 +368,6 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
monitor_thermal_zone(tz);
}
/**
* thermal_zone_get_temp() - returns the temperature of a thermal zone
* @tz: a valid pointer to a struct thermal_zone_device
* @temp: a valid pointer to where to store the resulting temperature.
*
* When a valid thermal zone reference is passed, it will fetch its
* temperature and fill @temp.
*
* Return: On success returns 0, an error code otherwise
*/
int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
{
int ret = -EINVAL;
int count;
int crit_temp = INT_MAX;
enum thermal_trip_type type;
if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
goto exit;
mutex_lock(&tz->lock);
ret = tz->ops->get_temp(tz, temp);
if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) {
for (count = 0; count < tz->trips; count++) {
ret = tz->ops->get_trip_type(tz, count, &type);
if (!ret && type == THERMAL_TRIP_CRITICAL) {
ret = tz->ops->get_trip_temp(tz, count,
&crit_temp);
break;
}
}
/*
* Only allow emulating a temperature when the real temperature
* is below the critical temperature so that the emulation code
* cannot hide critical conditions.
*/
if (!ret && *temp < crit_temp)
*temp = tz->emul_temperature;
}
mutex_unlock(&tz->lock);
exit:
return ret;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
void thermal_zone_set_trips(struct thermal_zone_device *tz)
{
int low = -INT_MAX;
int high = INT_MAX;
int trip_temp, hysteresis;
int i, ret;
mutex_lock(&tz->lock);
if (!tz->ops->set_trips || !tz->ops->get_trip_hyst)
goto exit;
for (i = 0; i < tz->trips; i++) {
int trip_low;
tz->ops->get_trip_temp(tz, i, &trip_temp);
tz->ops->get_trip_hyst(tz, i, &hysteresis);
trip_low = trip_temp - hysteresis;
if (trip_low < tz->temperature && trip_low > low)
low = trip_low;
if (trip_temp > tz->temperature && trip_temp < high)
high = trip_temp;
}
/* No need to change trip points */
if (tz->prev_low_trip == low && tz->prev_high_trip == high)
goto exit;
tz->prev_low_trip = low;
tz->prev_high_trip = high;
dev_dbg(&tz->device,
"new temperature boundaries: %d < x < %d\n", low, high);
/*
* Set a temperature window. When this window is left the driver
* must inform the thermal core via thermal_zone_device_update.
*/
ret = tz->ops->set_trips(tz, low, high);
if (ret)
dev_err(&tz->device, "Failed to set trips: %d\n", ret);
exit:
mutex_unlock(&tz->lock);
}
EXPORT_SYMBOL_GPL(thermal_zone_set_trips);
static void update_temperature(struct thermal_zone_device *tz)
{
int temp, ret;
......@@ -629,453 +427,38 @@ void thermal_zone_device_update(struct thermal_zone_device *tz,
}
EXPORT_SYMBOL_GPL(thermal_zone_device_update);
static void thermal_zone_device_check(struct work_struct *work)
{
struct thermal_zone_device *tz = container_of(work, struct
thermal_zone_device,
poll_queue.work);
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
}
/* sys I/F for thermal zone */
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
static ssize_t
type_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->type);
}
static ssize_t
temp_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int temperature, ret;
ret = thermal_zone_get_temp(tz, &temperature);
if (ret)
return ret;
return sprintf(buf, "%d\n", temperature);
}
static ssize_t
mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_device_mode mode;
int result;
if (!tz->ops->get_mode)
return -EPERM;
result = tz->ops->get_mode(tz, &mode);
if (result)
return result;
return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
: "disabled");
}
static ssize_t
mode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int result;
if (!tz->ops->set_mode)
return -EPERM;
if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
else
result = -EINVAL;
if (result)
return result;
return count;
}
static ssize_t
trip_point_type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_trip_type type;
int trip, result;
if (!tz->ops->get_trip_type)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
return -EINVAL;
result = tz->ops->get_trip_type(tz, trip, &type);
if (result)
return result;
switch (type) {
case THERMAL_TRIP_CRITICAL:
return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
default:
return sprintf(buf, "unknown\n");
}
}
static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->set_trip_temp)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
return -EINVAL;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
ret = tz->ops->set_trip_temp(tz, trip, temperature);
if (ret)
return ret;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->get_trip_temp)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
return -EINVAL;
ret = tz->ops->get_trip_temp(tz, trip, &temperature);
if (ret)
return ret;
return sprintf(buf, "%d\n", temperature);
}
static ssize_t
trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->set_trip_hyst)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
return -EINVAL;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
/*
* We are not doing any check on the 'temperature' value
* here. The driver implementing 'set_trip_hyst' has to
* take care of this.
*/
ret = tz->ops->set_trip_hyst(tz, trip, temperature);
if (!ret)
thermal_zone_set_trips(tz);
return ret ? ret : count;
}
static ssize_t
trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->get_trip_hyst)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
return -EINVAL;
ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
return ret ? ret : sprintf(buf, "%d\n", temperature);
}
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
struct thermal_cooling_device *cdev = NULL;
int state;
if (!sscanf(buf, "%d\n", &state))
return -EINVAL;
/* sanity check: values below 1000 millicelcius don't make sense
* and can cause the system to go into a thermal heart attack
/**
* thermal_notify_framework - Sensor drivers use this API to notify framework
* @tz: thermal zone device
* @trip: indicates which trip point has been crossed
*
* This function handles the trip events from sensor drivers. It starts
* throttling the cooling devices according to the policy configured.
* For CRITICAL and HOT trip points, this notifies the respective drivers,
* and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
* The throttling policy is based on the configured platform data; if no
* platform data is provided, this uses the step_wise throttling policy.
*/
if (state && state < 1000)
return -EINVAL;
if (state && !tz->forced_passive) {
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
if (!strncmp("Processor", cdev->type,
sizeof("Processor")))
thermal_zone_bind_cooling_device(tz,
THERMAL_TRIPS_NONE, cdev,
THERMAL_NO_LIMIT,
THERMAL_NO_LIMIT,
THERMAL_WEIGHT_DEFAULT);
}
mutex_unlock(&thermal_list_lock);
if (!tz->passive_delay)
tz->passive_delay = 1000;
} else if (!state && tz->forced_passive) {
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
if (!strncmp("Processor", cdev->type,
sizeof("Processor")))
thermal_zone_unbind_cooling_device(tz,
THERMAL_TRIPS_NONE,
cdev);
}
mutex_unlock(&thermal_list_lock);
tz->passive_delay = 0;
}
tz->forced_passive = state;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
static ssize_t
passive_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%d\n", tz->forced_passive);
}
static ssize_t
policy_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int ret = -EINVAL;
struct thermal_zone_device *tz = to_thermal_zone(dev);
struct thermal_governor *gov;
char name[THERMAL_NAME_LENGTH];
snprintf(name, sizeof(name), "%s", buf);
mutex_lock(&thermal_governor_lock);
mutex_lock(&tz->lock);
gov = __find_governor(strim(name));
if (!gov)
goto exit;
ret = thermal_set_governor(tz, gov);
if (!ret)
ret = count;
exit:
mutex_unlock(&tz->lock);
mutex_unlock(&thermal_governor_lock);
return ret;
}
static ssize_t
policy_show(struct device *dev, struct device_attribute *devattr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->governor->name);
}
static ssize_t
available_policies_show(struct device *dev, struct device_attribute *devattr,
char *buf)
void thermal_notify_framework(struct thermal_zone_device *tz, int trip)
{
struct thermal_governor *pos;
ssize_t count = 0;
ssize_t size = PAGE_SIZE;
mutex_lock(&thermal_governor_lock);
list_for_each_entry(pos, &thermal_governor_list, governor_list) {
size = PAGE_SIZE - count;
count += scnprintf(buf + count, size, "%s ", pos->name);
}
count += scnprintf(buf + count, size, "\n");
mutex_unlock(&thermal_governor_lock);
return count;
handle_thermal_trip(tz, trip);
}
EXPORT_SYMBOL_GPL(thermal_notify_framework);
static ssize_t
emul_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
static void thermal_zone_device_check(struct work_struct *work)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int ret = 0;
int temperature;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
if (!tz->ops->set_emul_temp) {
mutex_lock(&tz->lock);
tz->emul_temperature = temperature;
mutex_unlock(&tz->lock);
} else {
ret = tz->ops->set_emul_temp(tz, temperature);
}
if (!ret)
struct thermal_zone_device *tz = container_of(work, struct
thermal_zone_device,
poll_queue.work);
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return ret ? ret : count;
}
static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store);
static ssize_t
sustainable_power_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
if (tz->tzp)
return sprintf(buf, "%u\n", tz->tzp->sustainable_power);
else
return -EIO;
}
static ssize_t
sustainable_power_store(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
u32 sustainable_power;
if (!tz->tzp)
return -EIO;
if (kstrtou32(buf, 10, &sustainable_power))
return -EINVAL;
tz->tzp->sustainable_power = sustainable_power;
return count;
}
static DEVICE_ATTR(sustainable_power, S_IWUSR | S_IRUGO, sustainable_power_show,
sustainable_power_store);
#define create_s32_tzp_attr(name) \
static ssize_t \
name##_show(struct device *dev, struct device_attribute *devattr, \
char *buf) \
{ \
struct thermal_zone_device *tz = to_thermal_zone(dev); \
\
if (tz->tzp) \
return sprintf(buf, "%d\n", tz->tzp->name); \
else \
return -EIO; \
} \
\
static ssize_t \
name##_store(struct device *dev, struct device_attribute *devattr, \
const char *buf, size_t count) \
{ \
struct thermal_zone_device *tz = to_thermal_zone(dev); \
s32 value; \
\
if (!tz->tzp) \
return -EIO; \
\
if (kstrtos32(buf, 10, &value)) \
return -EINVAL; \
\
tz->tzp->name = value; \
\
return count; \
} \
static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, name##_show, name##_store)
create_s32_tzp_attr(k_po);
create_s32_tzp_attr(k_pu);
create_s32_tzp_attr(k_i);
create_s32_tzp_attr(k_d);
create_s32_tzp_attr(integral_cutoff);
create_s32_tzp_attr(slope);
create_s32_tzp_attr(offset);
#undef create_s32_tzp_attr
static struct device_attribute *dev_tzp_attrs[] = {
&dev_attr_sustainable_power,
&dev_attr_k_po,
&dev_attr_k_pu,
&dev_attr_k_i,
&dev_attr_k_d,
&dev_attr_integral_cutoff,
&dev_attr_slope,
&dev_attr_offset,
};
static int create_tzp_attrs(struct device *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(dev_tzp_attrs); i++) {
int ret;
struct device_attribute *dev_attr = dev_tzp_attrs[i];
ret = device_create_file(dev, dev_attr);
if (ret)
return ret;
}
return 0;
}
/*
* Power actor section: interface to power actors to estimate power
*
* Set of functions used to interact to cooling devices that know
* how to estimate their devices power consumption.
*/
/**
* power_actor_get_max_power() - get the maximum power that a cdev can consume
......@@ -1127,12 +510,13 @@ int power_actor_get_min_power(struct thermal_cooling_device *cdev,
}
/**
* power_actor_set_power() - limit the maximum power that a cooling device can consume
* power_actor_set_power() - limit the maximum power a cooling device consumes
* @cdev: pointer to &thermal_cooling_device
* @instance: thermal instance to update
* @power: the power in milliwatts
*
* Set the cooling device to consume at most @power milliwatts.
* Set the cooling device to consume at most @power milliwatts. The limit is
* expected to be a cap at the maximum power consumption.
*
* Return: 0 on success, -EINVAL if the cooling device does not
* implement the power actor API or -E* for other failures.
......@@ -1159,143 +543,75 @@ int power_actor_set_power(struct thermal_cooling_device *cdev,
return 0;
}
static DEVICE_ATTR(type, 0444, type_show, NULL);
static DEVICE_ATTR(temp, 0444, temp_show, NULL);
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store);
static DEVICE_ATTR(available_policies, S_IRUGO, available_policies_show, NULL);
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
static ssize_t
thermal_cooling_device_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
void thermal_zone_device_rebind_exception(struct thermal_zone_device *tz,
const char *cdev_type, size_t size)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
struct thermal_cooling_device *cdev = NULL;
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
/* skip non matching cdevs */
if (strncmp(cdev_type, cdev->type, size))
continue;
return sprintf(buf, "%s\n", cdev->type);
/* re binding the exception matching the type pattern */
thermal_zone_bind_cooling_device(tz, THERMAL_TRIPS_NONE, cdev,
THERMAL_NO_LIMIT,
THERMAL_NO_LIMIT,
THERMAL_WEIGHT_DEFAULT);
}
mutex_unlock(&thermal_list_lock);
}
static ssize_t
thermal_cooling_device_max_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
void thermal_zone_device_unbind_exception(struct thermal_zone_device *tz,
const char *cdev_type, size_t size)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
struct thermal_cooling_device *cdev = NULL;
ret = cdev->ops->get_max_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
mutex_lock(&thermal_list_lock);
list_for_each_entry(cdev, &thermal_cdev_list, node) {
/* skip non matching cdevs */
if (strncmp(cdev_type, cdev->type, size))
continue;
/* unbinding the exception matching the type pattern */
thermal_zone_unbind_cooling_device(tz, THERMAL_TRIPS_NONE,
cdev);
}
mutex_unlock(&thermal_list_lock);
}
static ssize_t
thermal_cooling_device_cur_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
/*
* Device management section: cooling devices, zones devices, and binding
*
* Set of functions provided by the thermal core for:
* - cooling devices lifecycle: registration, unregistration,
* binding, and unbinding.
* - thermal zone devices lifecycle: registration, unregistration,
* binding, and unbinding.
*/
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_cur_state(cdev, &state);
if (ret)
if (lock)
mutex_lock(lock);
ret = idr_alloc(idr, NULL, 0, 0, GFP_KERNEL);
if (lock)
mutex_unlock(lock);
if (unlikely(ret < 0))
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int result;
if (!sscanf(buf, "%ld\n", &state))
return -EINVAL;
if ((long)state < 0)
return -EINVAL;
result = cdev->ops->set_cur_state(cdev, state);
if (result)
return result;
return count;
}
static struct device_attribute dev_attr_cdev_type =
__ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
static DEVICE_ATTR(max_state, 0444,
thermal_cooling_device_max_state_show, NULL);
static DEVICE_ATTR(cur_state, 0644,
thermal_cooling_device_cur_state_show,
thermal_cooling_device_cur_state_store);
static ssize_t
thermal_cooling_device_trip_point_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_instance *instance;
instance =
container_of(attr, struct thermal_instance, attr);
if (instance->trip == THERMAL_TRIPS_NONE)
return sprintf(buf, "-1\n");
else
return sprintf(buf, "%d\n", instance->trip);
}
static struct attribute *cooling_device_attrs[] = {
&dev_attr_cdev_type.attr,
&dev_attr_max_state.attr,
&dev_attr_cur_state.attr,
NULL,
};
static const struct attribute_group cooling_device_attr_group = {
.attrs = cooling_device_attrs,
};
static const struct attribute_group *cooling_device_attr_groups[] = {
&cooling_device_attr_group,
NULL,
};
static ssize_t
thermal_cooling_device_weight_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_instance *instance;
instance = container_of(attr, struct thermal_instance, weight_attr);
return sprintf(buf, "%d\n", instance->weight);
*id = ret;
return 0;
}
static ssize_t
thermal_cooling_device_weight_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_instance *instance;
int ret, weight;
ret = kstrtoint(buf, 0, &weight);
if (ret)
return ret;
instance = container_of(attr, struct thermal_instance, weight_attr);
instance->weight = weight;
return count;
static void release_idr(struct idr *idr, struct mutex *lock, int id)
{
if (lock)
mutex_lock(lock);
idr_remove(idr, id);
if (lock)
mutex_unlock(lock);
}
/* Device management */
/**
* thermal_zone_bind_cooling_device() - bind a cooling device to a thermal zone
......@@ -1358,8 +674,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
if (lower > upper || upper > max_state)
return -EINVAL;
dev =
kzalloc(sizeof(struct thermal_instance), GFP_KERNEL);
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->tz = tz;
......@@ -1485,8 +800,8 @@ static void thermal_release(struct device *dev)
sizeof("thermal_zone") - 1)) {
tz = to_thermal_zone(dev);
kfree(tz);
} else if(!strncmp(dev_name(dev), "cooling_device",
sizeof("cooling_device") - 1)){
} else if (!strncmp(dev_name(dev), "cooling_device",
sizeof("cooling_device") - 1)) {
cdev = to_cooling_device(dev);
kfree(cdev);
}
......@@ -1497,6 +812,78 @@ static struct class thermal_class = {
.dev_release = thermal_release,
};
static inline
void print_bind_err_msg(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int ret)
{
dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n",
tz->type, cdev->type, ret);
}
static void __bind(struct thermal_zone_device *tz, int mask,
struct thermal_cooling_device *cdev,
unsigned long *limits,
unsigned int weight)
{
int i, ret;
for (i = 0; i < tz->trips; i++) {
if (mask & (1 << i)) {
unsigned long upper, lower;
upper = THERMAL_NO_LIMIT;
lower = THERMAL_NO_LIMIT;
if (limits) {
lower = limits[i * 2];
upper = limits[i * 2 + 1];
}
ret = thermal_zone_bind_cooling_device(tz, i, cdev,
upper, lower,
weight);
if (ret)
print_bind_err_msg(tz, cdev, ret);
}
}
}
static void bind_cdev(struct thermal_cooling_device *cdev)
{
int i, ret;
const struct thermal_zone_params *tzp;
struct thermal_zone_device *pos = NULL;
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node) {
if (!pos->tzp && !pos->ops->bind)
continue;
if (pos->ops->bind) {
ret = pos->ops->bind(pos, cdev);
if (ret)
print_bind_err_msg(pos, cdev, ret);
continue;
}
tzp = pos->tzp;
if (!tzp || !tzp->tbp)
continue;
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
continue;
if (tzp->tbp[i].match(pos, cdev))
continue;
tzp->tbp[i].cdev = cdev;
__bind(pos, tzp->tbp[i].trip_mask, cdev,
tzp->tbp[i].binding_limits,
tzp->tbp[i].weight);
}
}
mutex_unlock(&thermal_list_lock);
}
/**
* __thermal_cooling_device_register() - register a new thermal cooling device
* @np: a pointer to a device tree node.
......@@ -1529,7 +916,7 @@ __thermal_cooling_device_register(struct device_node *np,
!ops->set_cur_state)
return ERR_PTR(-EINVAL);
cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL);
cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
if (!cdev)
return ERR_PTR(-ENOMEM);
......@@ -1546,7 +933,7 @@ __thermal_cooling_device_register(struct device_node *np,
cdev->ops = ops;
cdev->updated = false;
cdev->device.class = &thermal_class;
cdev->device.groups = cooling_device_attr_groups;
thermal_cooling_device_setup_sysfs(cdev);
cdev->devdata = devdata;
dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
result = device_register(&cdev->device);
......@@ -1619,12 +1006,22 @@ thermal_of_cooling_device_register(struct device_node *np,
}
EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register);
static void __unbind(struct thermal_zone_device *tz, int mask,
struct thermal_cooling_device *cdev)
{
int i;
for (i = 0; i < tz->trips; i++)
if (mask & (1 << i))
thermal_zone_unbind_cooling_device(tz, i, cdev);
}
/**
* thermal_cooling_device_unregister - removes the registered thermal cooling device
* thermal_cooling_device_unregister - removes a thermal cooling device
* @cdev: the thermal cooling device to remove.
*
* thermal_cooling_device_unregister() must be called when the device is no
* longer needed.
* thermal_cooling_device_unregister() must be called when a registered
* thermal cooling device is no longer needed.
*/
void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
{
......@@ -1668,171 +1065,49 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
mutex_unlock(&thermal_list_lock);
if (cdev->type[0])
device_remove_file(&cdev->device, &dev_attr_cdev_type);
device_remove_file(&cdev->device, &dev_attr_max_state);
device_remove_file(&cdev->device, &dev_attr_cur_state);
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
device_unregister(&cdev->device);
return;
}
EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister);
void thermal_cdev_update(struct thermal_cooling_device *cdev)
static void bind_tz(struct thermal_zone_device *tz)
{
struct thermal_instance *instance;
unsigned long target = 0;
int i, ret;
struct thermal_cooling_device *pos = NULL;
const struct thermal_zone_params *tzp = tz->tzp;
mutex_lock(&cdev->lock);
/* cooling device is updated*/
if (cdev->updated) {
mutex_unlock(&cdev->lock);
if (!tzp && !tz->ops->bind)
return;
}
/* Make sure cdev enters the deepest cooling state */
list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
dev_dbg(&cdev->device, "zone%d->target=%lu\n",
instance->tz->id, instance->target);
if (instance->target == THERMAL_NO_TARGET)
continue;
if (instance->target > target)
target = instance->target;
}
cdev->ops->set_cur_state(cdev, target);
cdev->updated = true;
mutex_unlock(&cdev->lock);
trace_cdev_update(cdev, target);
dev_dbg(&cdev->device, "set to state %lu\n", target);
}
EXPORT_SYMBOL(thermal_cdev_update);
/**
* thermal_notify_framework - Sensor drivers use this API to notify framework
* @tz: thermal zone device
* @trip: indicates which trip point has been crossed
*
* This function handles the trip events from sensor drivers. It starts
* throttling the cooling devices according to the policy configured.
* For CRITICAL and HOT trip points, this notifies the respective drivers,
* and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
* The throttling policy is based on the configured platform data; if no
* platform data is provided, this uses the step_wise throttling policy.
*/
void thermal_notify_framework(struct thermal_zone_device *tz, int trip)
{
handle_thermal_trip(tz, trip);
}
EXPORT_SYMBOL_GPL(thermal_notify_framework);
/**
* create_trip_attrs() - create attributes for trip points
* @tz: the thermal zone device
* @mask: Writeable trip point bitmap.
*
* helper function to instantiate sysfs entries for every trip
* point and its properties of a struct thermal_zone_device.
*
* Return: 0 on success, the proper error value otherwise.
*/
static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
{
int indx;
int size = sizeof(struct thermal_attr) * tz->trips;
tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_type_attrs)
return -ENOMEM;
tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_temp_attrs) {
kfree(tz->trip_type_attrs);
return -ENOMEM;
}
mutex_lock(&thermal_list_lock);
if (tz->ops->get_trip_hyst) {
tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_hyst_attrs) {
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
return -ENOMEM;
}
/* If there is ops->bind, try to use ops->bind */
if (tz->ops->bind) {
list_for_each_entry(pos, &thermal_cdev_list, node) {
ret = tz->ops->bind(tz, pos);
if (ret)
print_bind_err_msg(tz, pos, ret);
}
for (indx = 0; indx < tz->trips; indx++) {
/* create trip type attribute */
snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_type", indx);
sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
tz->trip_type_attrs[indx].attr.attr.name =
tz->trip_type_attrs[indx].name;
tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
device_create_file(&tz->device,
&tz->trip_type_attrs[indx].attr);
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
tz->trip_temp_attrs[indx].attr.attr.name =
tz->trip_temp_attrs[indx].name;
tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) &&
mask & (1 << indx)) {
tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_temp_attrs[indx].attr.store =
trip_point_temp_store;
goto exit;
}
device_create_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
if (!tzp || !tzp->tbp)
goto exit;
/* create Optional trip hyst attribute */
if (!tz->ops->get_trip_hyst)
list_for_each_entry(pos, &thermal_cdev_list, node) {
for (i = 0; i < tzp->num_tbps; i++) {
if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
continue;
snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_hyst", indx);
sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
tz->trip_hyst_attrs[indx].attr.attr.name =
tz->trip_hyst_attrs[indx].name;
tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
if (tz->ops->set_trip_hyst) {
tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_hyst_attrs[indx].attr.store =
trip_point_hyst_store;
}
device_create_file(&tz->device,
&tz->trip_hyst_attrs[indx].attr);
if (tzp->tbp[i].match(tz, pos))
continue;
tzp->tbp[i].cdev = pos;
__bind(tz, tzp->tbp[i].trip_mask, pos,
tzp->tbp[i].binding_limits,
tzp->tbp[i].weight);
}
return 0;
}
static void remove_trip_attrs(struct thermal_zone_device *tz)
{
int indx;
for (indx = 0; indx < tz->trips; indx++) {
device_remove_file(&tz->device,
&tz->trip_type_attrs[indx].attr);
device_remove_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
if (tz->ops->get_trip_hyst)
device_remove_file(&tz->device,
&tz->trip_hyst_attrs[indx].attr);
}
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
kfree(tz->trip_hyst_attrs);
exit:
mutex_unlock(&thermal_list_lock);
}
/**
......@@ -1859,20 +1134,22 @@ static void remove_trip_attrs(struct thermal_zone_device *tz)
* in case of error, an ERR_PTR. Caller must check return value with
* IS_ERR*() helpers.
*/
struct thermal_zone_device *thermal_zone_device_register(const char *type,
int trips, int mask, void *devdata,
struct thermal_zone_device_ops *ops,
struct thermal_zone_params *tzp,
int passive_delay, int polling_delay)
struct thermal_zone_device *
thermal_zone_device_register(const char *type, int trips, int mask,
void *devdata, struct thermal_zone_device_ops *ops,
struct thermal_zone_params *tzp, int passive_delay,
int polling_delay)
{
struct thermal_zone_device *tz;
enum thermal_trip_type trip_type;
int trip_temp;
int result;
int count;
int passive = 0;
struct thermal_governor *governor;
if (!type || strlen(type) == 0)
return ERR_PTR(-EINVAL);
if (type && strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
......@@ -1885,7 +1162,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
return ERR_PTR(-EINVAL);
tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL);
tz = kzalloc(sizeof(*tz), GFP_KERNEL);
if (!tz)
return ERR_PTR(-ENOMEM);
......@@ -1898,7 +1175,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
return ERR_PTR(result);
}
strlcpy(tz->type, type ? : "", sizeof(tz->type));
strlcpy(tz->type, type, sizeof(tz->type));
tz->ops = ops;
tz->tzp = tzp;
tz->device.class = &thermal_class;
......@@ -1906,6 +1183,13 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
tz->trips = trips;
tz->passive_delay = passive_delay;
tz->polling_delay = polling_delay;
/* sys I/F */
/* Add nodes that are always present via .groups */
result = thermal_zone_create_device_groups(tz, mask);
if (result)
goto unregister;
/* A new thermal zone needs to be updated anyway. */
atomic_set(&tz->need_update, 1);
......@@ -1917,32 +1201,9 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
return ERR_PTR(result);
}
/* sys I/F */
if (type) {
result = device_create_file(&tz->device, &dev_attr_type);
if (result)
goto unregister;
}
result = device_create_file(&tz->device, &dev_attr_temp);
if (result)
goto unregister;
if (ops->get_mode) {
result = device_create_file(&tz->device, &dev_attr_mode);
if (result)
goto unregister;
}
result = create_trip_attrs(tz, mask);
if (result)
goto unregister;
for (count = 0; count < trips; count++) {
if (tz->ops->get_trip_type(tz, count, &trip_type))
set_bit(count, &tz->trips_disabled);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
if (tz->ops->get_trip_temp(tz, count, &trip_temp))
set_bit(count, &tz->trips_disabled);
/* Check for bogus trip points */
......@@ -1950,33 +1211,6 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
set_bit(count, &tz->trips_disabled);
}
if (!passive) {
result = device_create_file(&tz->device, &dev_attr_passive);
if (result)
goto unregister;
}
if (IS_ENABLED(CONFIG_THERMAL_EMULATION)) {
result = device_create_file(&tz->device, &dev_attr_emul_temp);
if (result)
goto unregister;
}
/* Create policy attribute */
result = device_create_file(&tz->device, &dev_attr_policy);
if (result)
goto unregister;
/* Add thermal zone params */
result = create_tzp_attrs(&tz->device);
if (result)
goto unregister;
/* Create available_policies attribute */
result = device_create_file(&tz->device, &dev_attr_available_policies);
if (result)
goto unregister;
/* Update 'this' zone's governor information */
mutex_lock(&thermal_governor_lock);
......@@ -2006,7 +1240,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
/* Bind cooling devices for this zone */
bind_tz(tz);
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
INIT_DELAYED_WORK(&tz->poll_queue, thermal_zone_device_check);
thermal_zone_device_reset(tz);
/* Update the new thermal zone and mark it as already updated. */
......@@ -2071,14 +1305,10 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
thermal_zone_device_set_polling(tz, 0);
if (tz->type[0])
device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
device_remove_file(&tz->device, &dev_attr_policy);
device_remove_file(&tz->device, &dev_attr_available_policies);
remove_trip_attrs(tz);
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
kfree(tz->trip_hyst_attrs);
kfree(tz->trips_attribute_group.attrs);
thermal_set_governor(tz, NULL);
thermal_remove_hwmon_sysfs(tz);
......@@ -2086,7 +1316,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
idr_destroy(&tz->idr);
mutex_destroy(&tz->lock);
device_unregister(&tz->device);
return;
kfree(tz->device.groups);
}
EXPORT_SYMBOL_GPL(thermal_zone_device_unregister);
......@@ -2128,36 +1358,6 @@ struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name)
}
EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
/**
* thermal_zone_get_slope - return the slope attribute of the thermal zone
* @tz: thermal zone device with the slope attribute
*
* Return: If the thermal zone device has a slope attribute, return it, else
* return 1.
*/
int thermal_zone_get_slope(struct thermal_zone_device *tz)
{
if (tz && tz->tzp)
return tz->tzp->slope;
return 1;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
/**
* thermal_zone_get_offset - return the offset attribute of the thermal zone
* @tz: thermal zone device with the offset attribute
*
* Return: If the thermal zone device has a offset attribute, return it, else
* return 0.
*/
int thermal_zone_get_offset(struct thermal_zone_device *tz)
{
if (tz && tz->tzp)
return tz->tzp->offset;
return 0;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_offset);
#ifdef CONFIG_NET
static const struct genl_multicast_group thermal_event_mcgrps[] = {
{ .name = THERMAL_GENL_MCAST_GROUP_NAME, },
......@@ -2249,38 +1449,6 @@ static inline int genetlink_init(void) { return 0; }
static inline void genetlink_exit(void) {}
#endif /* !CONFIG_NET */
static int __init thermal_register_governors(void)
{
int result;
result = thermal_gov_step_wise_register();
if (result)
return result;
result = thermal_gov_fair_share_register();
if (result)
return result;
result = thermal_gov_bang_bang_register();
if (result)
return result;
result = thermal_gov_user_space_register();
if (result)
return result;
return thermal_gov_power_allocator_register();
}
static void thermal_unregister_governors(void)
{
thermal_gov_step_wise_unregister();
thermal_gov_fair_share_unregister();
thermal_gov_bang_bang_unregister();
thermal_gov_user_space_unregister();
thermal_gov_power_allocator_unregister();
}
static int thermal_pm_notify(struct notifier_block *nb,
unsigned long mode, void *_unused)
{
......
......@@ -54,8 +54,34 @@ struct thermal_instance {
unsigned int weight; /* The weight of the cooling device */
};
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
int thermal_register_governor(struct thermal_governor *);
void thermal_unregister_governor(struct thermal_governor *);
void thermal_zone_device_rebind_exception(struct thermal_zone_device *,
const char *, size_t);
void thermal_zone_device_unbind_exception(struct thermal_zone_device *,
const char *, size_t);
int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
int thermal_build_list_of_policies(char *buf);
/* sysfs I/F */
int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *);
/* used only at binding time */
ssize_t
thermal_cooling_device_trip_point_show(struct device *,
struct device_attribute *, char *);
ssize_t thermal_cooling_device_weight_show(struct device *,
struct device_attribute *, char *);
ssize_t thermal_cooling_device_weight_store(struct device *,
struct device_attribute *,
const char *, size_t);
#ifdef CONFIG_THERMAL_GOV_STEP_WISE
int thermal_gov_step_wise_register(void);
......
/*
* thermal_helpers.c - helper functions to handle thermal devices
*
* Copyright (C) 2016 Eduardo Valentin <edubezval@gmail.com>
*
* Highly based on original thermal_core.c
* Copyright (C) 2008 Intel Corp
* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sysfs.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <trace/events/thermal.h>
#include "thermal_core.h"
int get_tz_trend(struct thermal_zone_device *tz, int trip)
{
enum thermal_trend trend;
if (tz->emul_temperature || !tz->ops->get_trend ||
tz->ops->get_trend(tz, trip, &trend)) {
if (tz->temperature > tz->last_temperature)
trend = THERMAL_TREND_RAISING;
else if (tz->temperature < tz->last_temperature)
trend = THERMAL_TREND_DROPPING;
else
trend = THERMAL_TREND_STABLE;
}
return trend;
}
EXPORT_SYMBOL(get_tz_trend);
struct thermal_instance *
get_thermal_instance(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int trip)
{
struct thermal_instance *pos = NULL;
struct thermal_instance *target_instance = NULL;
mutex_lock(&tz->lock);
mutex_lock(&cdev->lock);
list_for_each_entry(pos, &tz->thermal_instances, tz_node) {
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
target_instance = pos;
break;
}
}
mutex_unlock(&cdev->lock);
mutex_unlock(&tz->lock);
return target_instance;
}
EXPORT_SYMBOL(get_thermal_instance);
/**
* thermal_zone_get_temp() - returns the temperature of a thermal zone
* @tz: a valid pointer to a struct thermal_zone_device
* @temp: a valid pointer to where to store the resulting temperature.
*
* When a valid thermal zone reference is passed, it will fetch its
* temperature and fill @temp.
*
* Return: On success returns 0, an error code otherwise
*/
int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
{
int ret = -EINVAL;
int count;
int crit_temp = INT_MAX;
enum thermal_trip_type type;
if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
goto exit;
mutex_lock(&tz->lock);
ret = tz->ops->get_temp(tz, temp);
if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) {
for (count = 0; count < tz->trips; count++) {
ret = tz->ops->get_trip_type(tz, count, &type);
if (!ret && type == THERMAL_TRIP_CRITICAL) {
ret = tz->ops->get_trip_temp(tz, count,
&crit_temp);
break;
}
}
/*
* Only allow emulating a temperature when the real temperature
* is below the critical temperature so that the emulation code
* cannot hide critical conditions.
*/
if (!ret && *temp < crit_temp)
*temp = tz->emul_temperature;
}
mutex_unlock(&tz->lock);
exit:
return ret;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
void thermal_zone_set_trips(struct thermal_zone_device *tz)
{
int low = -INT_MAX;
int high = INT_MAX;
int trip_temp, hysteresis;
int i, ret;
mutex_lock(&tz->lock);
if (!tz->ops->set_trips || !tz->ops->get_trip_hyst)
goto exit;
for (i = 0; i < tz->trips; i++) {
int trip_low;
tz->ops->get_trip_temp(tz, i, &trip_temp);
tz->ops->get_trip_hyst(tz, i, &hysteresis);
trip_low = trip_temp - hysteresis;
if (trip_low < tz->temperature && trip_low > low)
low = trip_low;
if (trip_temp > tz->temperature && trip_temp < high)
high = trip_temp;
}
/* No need to change trip points */
if (tz->prev_low_trip == low && tz->prev_high_trip == high)
goto exit;
tz->prev_low_trip = low;
tz->prev_high_trip = high;
dev_dbg(&tz->device,
"new temperature boundaries: %d < x < %d\n", low, high);
/*
* Set a temperature window. When this window is left the driver
* must inform the thermal core via thermal_zone_device_update.
*/
ret = tz->ops->set_trips(tz, low, high);
if (ret)
dev_err(&tz->device, "Failed to set trips: %d\n", ret);
exit:
mutex_unlock(&tz->lock);
}
EXPORT_SYMBOL_GPL(thermal_zone_set_trips);
void thermal_cdev_update(struct thermal_cooling_device *cdev)
{
struct thermal_instance *instance;
unsigned long target = 0;
mutex_lock(&cdev->lock);
/* cooling device is updated*/
if (cdev->updated) {
mutex_unlock(&cdev->lock);
return;
}
/* Make sure cdev enters the deepest cooling state */
list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
dev_dbg(&cdev->device, "zone%d->target=%lu\n",
instance->tz->id, instance->target);
if (instance->target == THERMAL_NO_TARGET)
continue;
if (instance->target > target)
target = instance->target;
}
cdev->ops->set_cur_state(cdev, target);
cdev->updated = true;
mutex_unlock(&cdev->lock);
trace_cdev_update(cdev, target);
dev_dbg(&cdev->device, "set to state %lu\n", target);
}
EXPORT_SYMBOL(thermal_cdev_update);
/**
* thermal_zone_get_slope - return the slope attribute of the thermal zone
* @tz: thermal zone device with the slope attribute
*
* Return: If the thermal zone device has a slope attribute, return it, else
* return 1.
*/
int thermal_zone_get_slope(struct thermal_zone_device *tz)
{
if (tz && tz->tzp)
return tz->tzp->slope;
return 1;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
/**
* thermal_zone_get_offset - return the offset attribute of the thermal zone
* @tz: thermal zone device with the offset attribute
*
* Return: If the thermal zone device has a offset attribute, return it, else
* return 0.
*/
int thermal_zone_get_offset(struct thermal_zone_device *tz)
{
if (tz && tz->tzp)
return tz->tzp->offset;
return 0;
}
EXPORT_SYMBOL_GPL(thermal_zone_get_offset);
/*
* thermal.c - sysfs interface of thermal devices
*
* Copyright (C) 2016 Eduardo Valentin <edubezval@gmail.com>
*
* Highly based on original thermal_core.c
* Copyright (C) 2008 Intel Corp
* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sysfs.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/string.h>
#include "thermal_core.h"
/* sys I/F for thermal zone */
static ssize_t
type_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->type);
}
static ssize_t
temp_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int temperature, ret;
ret = thermal_zone_get_temp(tz, &temperature);
if (ret)
return ret;
return sprintf(buf, "%d\n", temperature);
}
static ssize_t
mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_device_mode mode;
int result;
if (!tz->ops->get_mode)
return -EPERM;
result = tz->ops->get_mode(tz, &mode);
if (result)
return result;
return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
: "disabled");
}
static ssize_t
mode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int result;
if (!tz->ops->set_mode)
return -EPERM;
if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
else
result = -EINVAL;
if (result)
return result;
return count;
}
static ssize_t
trip_point_type_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
enum thermal_trip_type type;
int trip, result;
if (!tz->ops->get_trip_type)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_type", &trip) != 1)
return -EINVAL;
result = tz->ops->get_trip_type(tz, trip, &type);
if (result)
return result;
switch (type) {
case THERMAL_TRIP_CRITICAL:
return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
default:
return sprintf(buf, "unknown\n");
}
}
static ssize_t
trip_point_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->set_trip_temp)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
return -EINVAL;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
ret = tz->ops->set_trip_temp(tz, trip, temperature);
if (ret)
return ret;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->get_trip_temp)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
return -EINVAL;
ret = tz->ops->get_trip_temp(tz, trip, &temperature);
if (ret)
return ret;
return sprintf(buf, "%d\n", temperature);
}
static ssize_t
trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->set_trip_hyst)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
return -EINVAL;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
/*
* We are not doing any check on the 'temperature' value
* here. The driver implementing 'set_trip_hyst' has to
* take care of this.
*/
ret = tz->ops->set_trip_hyst(tz, trip, temperature);
if (!ret)
thermal_zone_set_trips(tz);
return ret ? ret : count;
}
static ssize_t
trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int trip, ret;
int temperature;
if (!tz->ops->get_trip_hyst)
return -EPERM;
if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
return -EINVAL;
ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
return ret ? ret : sprintf(buf, "%d\n", temperature);
}
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int state;
if (sscanf(buf, "%d\n", &state) != 1)
return -EINVAL;
/* sanity check: values below 1000 millicelcius don't make sense
* and can cause the system to go into a thermal heart attack
*/
if (state && state < 1000)
return -EINVAL;
if (state && !tz->forced_passive) {
if (!tz->passive_delay)
tz->passive_delay = 1000;
thermal_zone_device_rebind_exception(tz, "Processor",
sizeof("Processor"));
} else if (!state && tz->forced_passive) {
tz->passive_delay = 0;
thermal_zone_device_unbind_exception(tz, "Processor",
sizeof("Processor"));
}
tz->forced_passive = state;
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
static ssize_t
passive_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%d\n", tz->forced_passive);
}
static ssize_t
policy_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
char name[THERMAL_NAME_LENGTH];
int ret;
snprintf(name, sizeof(name), "%s", buf);
ret = thermal_zone_device_set_policy(tz, name);
if (!ret)
ret = count;
return ret;
}
static ssize_t
policy_show(struct device *dev, struct device_attribute *devattr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
return sprintf(buf, "%s\n", tz->governor->name);
}
static ssize_t
available_policies_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
return thermal_build_list_of_policies(buf);
}
#if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
static ssize_t
emul_temp_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
int ret = 0;
int temperature;
if (kstrtoint(buf, 10, &temperature))
return -EINVAL;
if (!tz->ops->set_emul_temp) {
mutex_lock(&tz->lock);
tz->emul_temperature = temperature;
mutex_unlock(&tz->lock);
} else {
ret = tz->ops->set_emul_temp(tz, temperature);
}
if (!ret)
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return ret ? ret : count;
}
static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store);
#endif
static ssize_t
sustainable_power_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
if (tz->tzp)
return sprintf(buf, "%u\n", tz->tzp->sustainable_power);
else
return -EIO;
}
static ssize_t
sustainable_power_store(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
u32 sustainable_power;
if (!tz->tzp)
return -EIO;
if (kstrtou32(buf, 10, &sustainable_power))
return -EINVAL;
tz->tzp->sustainable_power = sustainable_power;
return count;
}
#define create_s32_tzp_attr(name) \
static ssize_t \
name##_show(struct device *dev, struct device_attribute *devattr, \
char *buf) \
{ \
struct thermal_zone_device *tz = to_thermal_zone(dev); \
\
if (tz->tzp) \
return sprintf(buf, "%d\n", tz->tzp->name); \
else \
return -EIO; \
} \
\
static ssize_t \
name##_store(struct device *dev, struct device_attribute *devattr, \
const char *buf, size_t count) \
{ \
struct thermal_zone_device *tz = to_thermal_zone(dev); \
s32 value; \
\
if (!tz->tzp) \
return -EIO; \
\
if (kstrtos32(buf, 10, &value)) \
return -EINVAL; \
\
tz->tzp->name = value; \
\
return count; \
} \
static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, name##_show, name##_store)
create_s32_tzp_attr(k_po);
create_s32_tzp_attr(k_pu);
create_s32_tzp_attr(k_i);
create_s32_tzp_attr(k_d);
create_s32_tzp_attr(integral_cutoff);
create_s32_tzp_attr(slope);
create_s32_tzp_attr(offset);
#undef create_s32_tzp_attr
/*
* These are thermal zone device attributes that will always be present.
* All the attributes created for tzp (create_s32_tzp_attr) also are always
* present on the sysfs interface.
*/
static DEVICE_ATTR(type, 0444, type_show, NULL);
static DEVICE_ATTR(temp, 0444, temp_show, NULL);
static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store);
static DEVICE_ATTR(available_policies, S_IRUGO, available_policies_show, NULL);
static DEVICE_ATTR(sustainable_power, S_IWUSR | S_IRUGO, sustainable_power_show,
sustainable_power_store);
/* These thermal zone device attributes are created based on conditions */
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
/* These attributes are unconditionally added to a thermal zone */
static struct attribute *thermal_zone_dev_attrs[] = {
&dev_attr_type.attr,
&dev_attr_temp.attr,
#if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
&dev_attr_emul_temp.attr,
#endif
&dev_attr_policy.attr,
&dev_attr_available_policies.attr,
&dev_attr_sustainable_power.attr,
&dev_attr_k_po.attr,
&dev_attr_k_pu.attr,
&dev_attr_k_i.attr,
&dev_attr_k_d.attr,
&dev_attr_integral_cutoff.attr,
&dev_attr_slope.attr,
&dev_attr_offset.attr,
NULL,
};
static struct attribute_group thermal_zone_attribute_group = {
.attrs = thermal_zone_dev_attrs,
};
/* We expose mode only if .get_mode is present */
static struct attribute *thermal_zone_mode_attrs[] = {
&dev_attr_mode.attr,
NULL,
};
static umode_t thermal_zone_mode_is_visible(struct kobject *kobj,
struct attribute *attr,
int attrno)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct thermal_zone_device *tz;
tz = container_of(dev, struct thermal_zone_device, device);
if (tz->ops->get_mode)
return attr->mode;
return 0;
}
static struct attribute_group thermal_zone_mode_attribute_group = {
.attrs = thermal_zone_mode_attrs,
.is_visible = thermal_zone_mode_is_visible,
};
/* We expose passive only if passive trips are present */
static struct attribute *thermal_zone_passive_attrs[] = {
&dev_attr_passive.attr,
NULL,
};
static umode_t thermal_zone_passive_is_visible(struct kobject *kobj,
struct attribute *attr,
int attrno)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct thermal_zone_device *tz;
enum thermal_trip_type trip_type;
int count, passive = 0;
tz = container_of(dev, struct thermal_zone_device, device);
for (count = 0; count < tz->trips && !passive; count++) {
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
}
if (!passive)
return attr->mode;
return 0;
}
static struct attribute_group thermal_zone_passive_attribute_group = {
.attrs = thermal_zone_passive_attrs,
.is_visible = thermal_zone_passive_is_visible,
};
static const struct attribute_group *thermal_zone_attribute_groups[] = {
&thermal_zone_attribute_group,
&thermal_zone_mode_attribute_group,
&thermal_zone_passive_attribute_group,
/* This is not NULL terminated as we create the group dynamically */
};
/**
* create_trip_attrs() - create attributes for trip points
* @tz: the thermal zone device
* @mask: Writeable trip point bitmap.
*
* helper function to instantiate sysfs entries for every trip
* point and its properties of a struct thermal_zone_device.
*
* Return: 0 on success, the proper error value otherwise.
*/
static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
{
struct attribute **attrs;
int indx;
/* This function works only for zones with at least one trip */
if (tz->trips <= 0)
return -EINVAL;
tz->trip_type_attrs = kcalloc(tz->trips, sizeof(*tz->trip_type_attrs),
GFP_KERNEL);
if (!tz->trip_type_attrs)
return -ENOMEM;
tz->trip_temp_attrs = kcalloc(tz->trips, sizeof(*tz->trip_temp_attrs),
GFP_KERNEL);
if (!tz->trip_temp_attrs) {
kfree(tz->trip_type_attrs);
return -ENOMEM;
}
if (tz->ops->get_trip_hyst) {
tz->trip_hyst_attrs = kcalloc(tz->trips,
sizeof(*tz->trip_hyst_attrs),
GFP_KERNEL);
if (!tz->trip_hyst_attrs) {
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
return -ENOMEM;
}
}
attrs = kcalloc(tz->trips * 3 + 1, sizeof(*attrs), GFP_KERNEL);
if (!attrs) {
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
if (tz->ops->get_trip_hyst)
kfree(tz->trip_hyst_attrs);
return -ENOMEM;
}
for (indx = 0; indx < tz->trips; indx++) {
/* create trip type attribute */
snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_type", indx);
sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
tz->trip_type_attrs[indx].attr.attr.name =
tz->trip_type_attrs[indx].name;
tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
/* create trip temp attribute */
snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_temp", indx);
sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
tz->trip_temp_attrs[indx].attr.attr.name =
tz->trip_temp_attrs[indx].name;
tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) &&
mask & (1 << indx)) {
tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_temp_attrs[indx].attr.store =
trip_point_temp_store;
}
attrs[indx + tz->trips] = &tz->trip_temp_attrs[indx].attr.attr;
/* create Optional trip hyst attribute */
if (!tz->ops->get_trip_hyst)
continue;
snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_hyst", indx);
sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
tz->trip_hyst_attrs[indx].attr.attr.name =
tz->trip_hyst_attrs[indx].name;
tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
if (tz->ops->set_trip_hyst) {
tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
tz->trip_hyst_attrs[indx].attr.store =
trip_point_hyst_store;
}
attrs[indx + tz->trips * 2] =
&tz->trip_hyst_attrs[indx].attr.attr;
}
attrs[tz->trips * 3] = NULL;
tz->trips_attribute_group.attrs = attrs;
return 0;
}
int thermal_zone_create_device_groups(struct thermal_zone_device *tz,
int mask)
{
const struct attribute_group **groups;
int i, size, result;
/* we need one extra for trips and the NULL to terminate the array */
size = ARRAY_SIZE(thermal_zone_attribute_groups) + 2;
/* This also takes care of API requirement to be NULL terminated */
groups = kcalloc(size, sizeof(*groups), GFP_KERNEL);
if (!groups)
return -ENOMEM;
for (i = 0; i < size - 2; i++)
groups[i] = thermal_zone_attribute_groups[i];
if (tz->trips) {
result = create_trip_attrs(tz, mask);
if (result) {
kfree(groups);
return result;
}
groups[size - 2] = &tz->trips_attribute_group;
}
tz->device.groups = groups;
return 0;
}
/* sys I/F for cooling device */
static ssize_t
thermal_cooling_device_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
return sprintf(buf, "%s\n", cdev->type);
}
static ssize_t
thermal_cooling_device_max_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_max_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int ret;
ret = cdev->ops->get_cur_state(cdev, &state);
if (ret)
return ret;
return sprintf(buf, "%ld\n", state);
}
static ssize_t
thermal_cooling_device_cur_state_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
unsigned long state;
int result;
if (sscanf(buf, "%ld\n", &state) != 1)
return -EINVAL;
if ((long)state < 0)
return -EINVAL;
result = cdev->ops->set_cur_state(cdev, state);
if (result)
return result;
return count;
}
static struct device_attribute dev_attr_cdev_type =
__ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
static DEVICE_ATTR(max_state, 0444,
thermal_cooling_device_max_state_show, NULL);
static DEVICE_ATTR(cur_state, 0644,
thermal_cooling_device_cur_state_show,
thermal_cooling_device_cur_state_store);
static struct attribute *cooling_device_attrs[] = {
&dev_attr_cdev_type.attr,
&dev_attr_max_state.attr,
&dev_attr_cur_state.attr,
NULL,
};
static const struct attribute_group cooling_device_attr_group = {
.attrs = cooling_device_attrs,
};
static const struct attribute_group *cooling_device_attr_groups[] = {
&cooling_device_attr_group,
NULL,
};
void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *cdev)
{
cdev->device.groups = cooling_device_attr_groups;
}
/* these helper will be used only at the time of bindig */
ssize_t
thermal_cooling_device_trip_point_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_instance *instance;
instance =
container_of(attr, struct thermal_instance, attr);
if (instance->trip == THERMAL_TRIPS_NONE)
return sprintf(buf, "-1\n");
else
return sprintf(buf, "%d\n", instance->trip);
}
ssize_t
thermal_cooling_device_weight_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct thermal_instance *instance;
instance = container_of(attr, struct thermal_instance, weight_attr);
return sprintf(buf, "%d\n", instance->weight);
}
ssize_t
thermal_cooling_device_weight_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct thermal_instance *instance;
int ret, weight;
ret = kstrtoint(buf, 0, &weight);
if (ret)
return ret;
instance = container_of(attr, struct thermal_instance, weight_attr);
instance->weight = weight;
return count;
}
......@@ -1298,7 +1298,7 @@ int ti_bandgap_probe(struct platform_device *pdev)
if (IS_ERR(bgp->div_clk)) {
dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
ret = PTR_ERR(bgp->div_clk);
goto free_irqs;
goto put_fclock;
}
for (i = 0; i < bgp->conf->sensor_count; i++) {
......@@ -1430,8 +1430,9 @@ int ti_bandgap_probe(struct platform_device *pdev)
if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
put_clks:
clk_put(bgp->fclock);
clk_put(bgp->div_clk);
put_fclock:
clk_put(bgp->fclock);
free_irqs:
if (TI_BANDGAP_HAS(bgp, TSHUT)) {
free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
......
......@@ -54,37 +54,33 @@ MODULE_PARM_DESC(notify_delay_ms,
* is some wrong values returned by cpuid for number of thresholds.
*/
#define MAX_NUMBER_OF_TRIPS 2
/* Limit number of package temp zones */
#define MAX_PKG_TEMP_ZONE_IDS 256
struct phy_dev_entry {
struct list_head list;
u16 phys_proc_id;
u16 first_cpu;
struct pkg_device {
int cpu;
bool work_scheduled;
u32 tj_max;
int ref_cnt;
u32 start_pkg_therm_low;
u32 start_pkg_therm_high;
u32 msr_pkg_therm_low;
u32 msr_pkg_therm_high;
struct delayed_work work;
struct thermal_zone_device *tzone;
struct cpumask cpumask;
};
static struct thermal_zone_params pkg_temp_tz_params = {
.no_hwmon = true,
};
/* List maintaining number of package instances */
static LIST_HEAD(phy_dev_list);
static DEFINE_MUTEX(phy_dev_list_mutex);
/* Keep track of how many package pointers we allocated in init() */
static int max_packages __read_mostly;
/* Array of package pointers */
static struct pkg_device **packages;
/* Serializes interrupt notification, work and hotplug */
static DEFINE_SPINLOCK(pkg_temp_lock);
/* Protects zone operation in the work function against hotplug removal */
static DEFINE_MUTEX(thermal_zone_mutex);
/* Interrupt to work function schedule queue */
static DEFINE_PER_CPU(struct delayed_work, pkg_temp_thermal_threshold_work);
/* To track if the work is already scheduled on a package */
static u8 *pkg_work_scheduled;
/* Spin lock to prevent races with pkg_work_scheduled */
static spinlock_t pkg_work_lock;
static u16 max_phy_id;
/* The dynamically assigned cpu hotplug state for module_exit() */
static enum cpuhp_state pkg_thermal_hp_state __read_mostly;
/* Debug counters to show using debugfs */
static struct dentry *debugfs;
......@@ -116,22 +112,20 @@ static int pkg_temp_debugfs_init(void)
return -ENOENT;
}
static struct phy_dev_entry
*pkg_temp_thermal_get_phy_entry(unsigned int cpu)
/*
* Protection:
*
* - cpu hotplug: Read serialized by cpu hotplug lock
* Write must hold pkg_temp_lock
*
* - Other callsites: Must hold pkg_temp_lock
*/
static struct pkg_device *pkg_temp_thermal_get_dev(unsigned int cpu)
{
u16 phys_proc_id = topology_physical_package_id(cpu);
struct phy_dev_entry *phy_ptr;
mutex_lock(&phy_dev_list_mutex);
list_for_each_entry(phy_ptr, &phy_dev_list, list)
if (phy_ptr->phys_proc_id == phys_proc_id) {
mutex_unlock(&phy_dev_list_mutex);
return phy_ptr;
}
mutex_unlock(&phy_dev_list_mutex);
int pkgid = topology_logical_package_id(cpu);
if (pkgid >= 0 && pkgid < max_packages)
return packages[pkgid];
return NULL;
}
......@@ -141,61 +135,44 @@ static struct phy_dev_entry
*/
static int get_tj_max(int cpu, u32 *tj_max)
{
u32 eax, edx;
u32 val;
u32 eax, edx, val;
int err;
err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
if (err)
goto err_ret;
else {
return err;
val = (eax >> 16) & 0xff;
if (val)
*tj_max = val * 1000;
else {
err = -EINVAL;
goto err_ret;
}
}
return 0;
err_ret:
*tj_max = 0;
return err;
return val ? 0 : -EINVAL;
}
static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp)
{
struct pkg_device *pkgdev = tzd->devdata;
u32 eax, edx;
struct phy_dev_entry *phy_dev_entry;
phy_dev_entry = tzd->devdata;
rdmsr_on_cpu(phy_dev_entry->first_cpu, MSR_IA32_PACKAGE_THERM_STATUS,
&eax, &edx);
rdmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_STATUS, &eax, &edx);
if (eax & 0x80000000) {
*temp = phy_dev_entry->tj_max -
((eax >> 16) & 0x7f) * 1000;
*temp = pkgdev->tj_max - ((eax >> 16) & 0x7f) * 1000;
pr_debug("sys_get_curr_temp %d\n", *temp);
return 0;
}
return -EINVAL;
}
static int sys_get_trip_temp(struct thermal_zone_device *tzd,
int trip, int *temp)
{
u32 eax, edx;
struct phy_dev_entry *phy_dev_entry;
u32 mask, shift;
struct pkg_device *pkgdev = tzd->devdata;
unsigned long thres_reg_value;
u32 mask, shift, eax, edx;
int ret;
if (trip >= MAX_NUMBER_OF_TRIPS)
return -EINVAL;
phy_dev_entry = tzd->devdata;
if (trip) {
mask = THERM_MASK_THRESHOLD1;
shift = THERM_SHIFT_THRESHOLD1;
......@@ -204,14 +181,14 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd,
shift = THERM_SHIFT_THRESHOLD0;
}
ret = rdmsr_on_cpu(phy_dev_entry->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT, &eax, &edx);
ret = rdmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
&eax, &edx);
if (ret < 0)
return -EINVAL;
return ret;
thres_reg_value = (eax & mask) >> shift;
if (thres_reg_value)
*temp = phy_dev_entry->tj_max - thres_reg_value * 1000;
*temp = pkgdev->tj_max - thres_reg_value * 1000;
else
*temp = 0;
pr_debug("sys_get_trip_temp %d\n", *temp);
......@@ -219,24 +196,20 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd,
return 0;
}
static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
int temp)
static int
sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp)
{
u32 l, h;
struct phy_dev_entry *phy_dev_entry;
u32 mask, shift, intr;
struct pkg_device *pkgdev = tzd->devdata;
u32 l, h, mask, shift, intr;
int ret;
phy_dev_entry = tzd->devdata;
if (trip >= MAX_NUMBER_OF_TRIPS || temp >= phy_dev_entry->tj_max)
if (trip >= MAX_NUMBER_OF_TRIPS || temp >= pkgdev->tj_max)
return -EINVAL;
ret = rdmsr_on_cpu(phy_dev_entry->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT,
ret = rdmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
&l, &h);
if (ret < 0)
return -EINVAL;
return ret;
if (trip) {
mask = THERM_MASK_THRESHOLD1;
......@@ -252,24 +225,20 @@ static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
* When users space sets a trip temperature == 0, which is indication
* that, it is no longer interested in receiving notifications.
*/
if (!temp)
if (!temp) {
l &= ~intr;
else {
l |= (phy_dev_entry->tj_max - temp)/1000 << shift;
} else {
l |= (pkgdev->tj_max - temp)/1000 << shift;
l |= intr;
}
return wrmsr_on_cpu(phy_dev_entry->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT,
l, h);
return wrmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
}
static int sys_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
static int sys_get_trip_type(struct thermal_zone_device *thermal, int trip,
enum thermal_trip_type *type)
{
*type = THERMAL_TRIP_PASSIVE;
return 0;
}
......@@ -281,7 +250,7 @@ static struct thermal_zone_device_ops tzone_ops = {
.set_trip_temp = sys_set_trip_temp,
};
static bool pkg_temp_thermal_platform_thermal_rate_control(void)
static bool pkg_thermal_rate_control(void)
{
return true;
}
......@@ -289,8 +258,8 @@ static bool pkg_temp_thermal_platform_thermal_rate_control(void)
/* Enable threshold interrupt on local package/cpu */
static inline void enable_pkg_thres_interrupt(void)
{
u32 l, h;
u8 thres_0, thres_1;
u32 l, h;
rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
/* only enable/disable if it had valid threshold value */
......@@ -307,271 +276,232 @@ static inline void enable_pkg_thres_interrupt(void)
static inline void disable_pkg_thres_interrupt(void)
{
u32 l, h;
rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
l & (~THERM_INT_THRESHOLD0_ENABLE) &
(~THERM_INT_THRESHOLD1_ENABLE), h);
l &= ~(THERM_INT_THRESHOLD0_ENABLE | THERM_INT_THRESHOLD1_ENABLE);
wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
}
static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work)
{
__u64 msr_val;
struct thermal_zone_device *tzone = NULL;
int cpu = smp_processor_id();
int phy_id = topology_physical_package_id(cpu);
struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu);
bool notify = false;
unsigned long flags;
if (!phdev)
return;
struct pkg_device *pkgdev;
u64 msr_val, wr_val;
spin_lock_irqsave(&pkg_work_lock, flags);
mutex_lock(&thermal_zone_mutex);
spin_lock_irq(&pkg_temp_lock);
++pkg_work_cnt;
if (unlikely(phy_id > max_phy_id)) {
spin_unlock_irqrestore(&pkg_work_lock, flags);
pkgdev = pkg_temp_thermal_get_dev(cpu);
if (!pkgdev) {
spin_unlock_irq(&pkg_temp_lock);
mutex_unlock(&thermal_zone_mutex);
return;
}
pkg_work_scheduled[phy_id] = 0;
spin_unlock_irqrestore(&pkg_work_lock, flags);
pkgdev->work_scheduled = false;
enable_pkg_thres_interrupt();
rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
if (msr_val & THERM_LOG_THRESHOLD0) {
wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS,
msr_val & ~THERM_LOG_THRESHOLD0);
notify = true;
}
if (msr_val & THERM_LOG_THRESHOLD1) {
wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS,
msr_val & ~THERM_LOG_THRESHOLD1);
notify = true;
wr_val = msr_val & ~(THERM_LOG_THRESHOLD0 | THERM_LOG_THRESHOLD1);
if (wr_val != msr_val) {
wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, wr_val);
tzone = pkgdev->tzone;
}
if (notify) {
pr_debug("thermal_zone_device_update\n");
thermal_zone_device_update(phdev->tzone,
THERMAL_EVENT_UNSPECIFIED);
}
}
static int pkg_temp_thermal_platform_thermal_notify(__u64 msr_val)
{
unsigned long flags;
int cpu = smp_processor_id();
int phy_id = topology_physical_package_id(cpu);
enable_pkg_thres_interrupt();
spin_unlock_irq(&pkg_temp_lock);
/*
* When a package is in interrupted state, all CPU's in that package
* are in the same interrupt state. So scheduling on any one CPU in
* the package is enough and simply return for others.
* If tzone is not NULL, then thermal_zone_mutex will prevent the
* concurrent removal in the cpu offline callback.
*/
spin_lock_irqsave(&pkg_work_lock, flags);
++pkg_interrupt_cnt;
if (unlikely(phy_id > max_phy_id) || unlikely(!pkg_work_scheduled) ||
pkg_work_scheduled[phy_id]) {
disable_pkg_thres_interrupt();
spin_unlock_irqrestore(&pkg_work_lock, flags);
return -EINVAL;
}
pkg_work_scheduled[phy_id] = 1;
spin_unlock_irqrestore(&pkg_work_lock, flags);
if (tzone)
thermal_zone_device_update(tzone, THERMAL_EVENT_UNSPECIFIED);
disable_pkg_thres_interrupt();
schedule_delayed_work_on(cpu,
&per_cpu(pkg_temp_thermal_threshold_work, cpu),
msecs_to_jiffies(notify_delay_ms));
return 0;
mutex_unlock(&thermal_zone_mutex);
}
static void pkg_thermal_schedule_work(int cpu, struct delayed_work *work)
{
unsigned long ms = msecs_to_jiffies(notify_delay_ms);
schedule_delayed_work_on(cpu, work, ms);
}
static int find_siblings_cpu(int cpu)
static int pkg_thermal_notify(u64 msr_val)
{
int i;
int id = topology_physical_package_id(cpu);
int cpu = smp_processor_id();
struct pkg_device *pkgdev;
unsigned long flags;
for_each_online_cpu(i)
if (i != cpu && topology_physical_package_id(i) == id)
return i;
spin_lock_irqsave(&pkg_temp_lock, flags);
++pkg_interrupt_cnt;
disable_pkg_thres_interrupt();
/* Work is per package, so scheduling it once is enough. */
pkgdev = pkg_temp_thermal_get_dev(cpu);
if (pkgdev && !pkgdev->work_scheduled) {
pkgdev->work_scheduled = true;
pkg_thermal_schedule_work(pkgdev->cpu, &pkgdev->work);
}
spin_unlock_irqrestore(&pkg_temp_lock, flags);
return 0;
}
static int pkg_temp_thermal_device_add(unsigned int cpu)
{
int err;
u32 tj_max;
struct phy_dev_entry *phy_dev_entry;
int thres_count;
u32 eax, ebx, ecx, edx;
u8 *temp;
unsigned long flags;
int pkgid = topology_logical_package_id(cpu);
u32 tj_max, eax, ebx, ecx, edx;
struct pkg_device *pkgdev;
int thres_count, err;
if (pkgid >= max_packages)
return -ENOMEM;
cpuid(6, &eax, &ebx, &ecx, &edx);
thres_count = ebx & 0x07;
if (!thres_count)
return -ENODEV;
if (topology_physical_package_id(cpu) > MAX_PKG_TEMP_ZONE_IDS)
return -ENODEV;
thres_count = clamp_val(thres_count, 0, MAX_NUMBER_OF_TRIPS);
err = get_tj_max(cpu, &tj_max);
if (err)
goto err_ret;
mutex_lock(&phy_dev_list_mutex);
return err;
phy_dev_entry = kzalloc(sizeof(*phy_dev_entry), GFP_KERNEL);
if (!phy_dev_entry) {
err = -ENOMEM;
goto err_ret_unlock;
}
pkgdev = kzalloc(sizeof(*pkgdev), GFP_KERNEL);
if (!pkgdev)
return -ENOMEM;
spin_lock_irqsave(&pkg_work_lock, flags);
if (topology_physical_package_id(cpu) > max_phy_id)
max_phy_id = topology_physical_package_id(cpu);
temp = krealloc(pkg_work_scheduled,
(max_phy_id+1) * sizeof(u8), GFP_ATOMIC);
if (!temp) {
spin_unlock_irqrestore(&pkg_work_lock, flags);
err = -ENOMEM;
goto err_ret_free;
}
pkg_work_scheduled = temp;
pkg_work_scheduled[topology_physical_package_id(cpu)] = 0;
spin_unlock_irqrestore(&pkg_work_lock, flags);
phy_dev_entry->phys_proc_id = topology_physical_package_id(cpu);
phy_dev_entry->first_cpu = cpu;
phy_dev_entry->tj_max = tj_max;
phy_dev_entry->ref_cnt = 1;
phy_dev_entry->tzone = thermal_zone_device_register("x86_pkg_temp",
INIT_DELAYED_WORK(&pkgdev->work, pkg_temp_thermal_threshold_work_fn);
pkgdev->cpu = cpu;
pkgdev->tj_max = tj_max;
pkgdev->tzone = thermal_zone_device_register("x86_pkg_temp",
thres_count,
(thres_count == MAX_NUMBER_OF_TRIPS) ?
0x03 : 0x01,
phy_dev_entry, &tzone_ops, &pkg_temp_tz_params, 0, 0);
if (IS_ERR(phy_dev_entry->tzone)) {
err = PTR_ERR(phy_dev_entry->tzone);
goto err_ret_free;
(thres_count == MAX_NUMBER_OF_TRIPS) ? 0x03 : 0x01,
pkgdev, &tzone_ops, &pkg_temp_tz_params, 0, 0);
if (IS_ERR(pkgdev->tzone)) {
err = PTR_ERR(pkgdev->tzone);
kfree(pkgdev);
return err;
}
/* Store MSR value for package thermal interrupt, to restore at exit */
rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
&phy_dev_entry->start_pkg_therm_low,
&phy_dev_entry->start_pkg_therm_high);
rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, pkgdev->msr_pkg_therm_low,
pkgdev->msr_pkg_therm_high);
list_add_tail(&phy_dev_entry->list, &phy_dev_list);
pr_debug("pkg_temp_thermal_device_add :phy_id %d cpu %d\n",
phy_dev_entry->phys_proc_id, cpu);
cpumask_set_cpu(cpu, &pkgdev->cpumask);
spin_lock_irq(&pkg_temp_lock);
packages[pkgid] = pkgdev;
spin_unlock_irq(&pkg_temp_lock);
return 0;
}
mutex_unlock(&phy_dev_list_mutex);
static int pkg_thermal_cpu_offline(unsigned int cpu)
{
struct pkg_device *pkgdev = pkg_temp_thermal_get_dev(cpu);
bool lastcpu, was_target;
int target;
if (!pkgdev)
return 0;
err_ret_free:
kfree(phy_dev_entry);
err_ret_unlock:
mutex_unlock(&phy_dev_list_mutex);
target = cpumask_any_but(&pkgdev->cpumask, cpu);
cpumask_clear_cpu(cpu, &pkgdev->cpumask);
lastcpu = target >= nr_cpu_ids;
/*
* Remove the sysfs files, if this is the last cpu in the package
* before doing further cleanups.
*/
if (lastcpu) {
struct thermal_zone_device *tzone = pkgdev->tzone;
err_ret:
return err;
}
/*
* We must protect against a work function calling
* thermal_zone_update, after/while unregister. We null out
* the pointer under the zone mutex, so the worker function
* won't try to call.
*/
mutex_lock(&thermal_zone_mutex);
pkgdev->tzone = NULL;
mutex_unlock(&thermal_zone_mutex);
static int pkg_temp_thermal_device_remove(unsigned int cpu)
{
struct phy_dev_entry *n;
u16 phys_proc_id = topology_physical_package_id(cpu);
struct phy_dev_entry *phdev =
pkg_temp_thermal_get_phy_entry(cpu);
thermal_zone_device_unregister(tzone);
}
if (!phdev)
return -ENODEV;
/* Protect against work and interrupts */
spin_lock_irq(&pkg_temp_lock);
/*
* Check whether this cpu was the current target and store the new
* one. When we drop the lock, then the interrupt notify function
* will see the new target.
*/
was_target = pkgdev->cpu == cpu;
pkgdev->cpu = target;
mutex_lock(&phy_dev_list_mutex);
/* If we are loosing the first cpu for this package, we need change */
if (phdev->first_cpu == cpu) {
phdev->first_cpu = find_siblings_cpu(cpu);
pr_debug("thermal_device_remove: first cpu switched %d\n",
phdev->first_cpu);
}
/*
* It is possible that no siblings left as this was the last cpu
* going offline. We don't need to worry about this assignment
* as the phydev entry will be removed in this case and
* thermal zone is removed.
* If this is the last CPU in the package remove the package
* reference from the array and restore the interrupt MSR. When we
* drop the lock neither the interrupt notify function nor the
* worker will see the package anymore.
*/
--phdev->ref_cnt;
pr_debug("thermal_device_remove: pkg: %d cpu %d ref_cnt %d\n",
phys_proc_id, cpu, phdev->ref_cnt);
if (!phdev->ref_cnt)
list_for_each_entry_safe(phdev, n, &phy_dev_list, list) {
if (phdev->phys_proc_id == phys_proc_id) {
thermal_zone_device_unregister(phdev->tzone);
list_del(&phdev->list);
kfree(phdev);
break;
if (lastcpu) {
packages[topology_logical_package_id(cpu)] = NULL;
/* After this point nothing touches the MSR anymore. */
wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
pkgdev->msr_pkg_therm_low, pkgdev->msr_pkg_therm_high);
}
/*
* Check whether there is work scheduled and whether the work is
* targeted at the outgoing CPU.
*/
if (pkgdev->work_scheduled && was_target) {
/*
* To cancel the work we need to drop the lock, otherwise
* we might deadlock if the work needs to be flushed.
*/
spin_unlock_irq(&pkg_temp_lock);
cancel_delayed_work_sync(&pkgdev->work);
spin_lock_irq(&pkg_temp_lock);
/*
* If this is not the last cpu in the package and the work
* did not run after we dropped the lock above, then we
* need to reschedule the work, otherwise the interrupt
* stays disabled forever.
*/
if (!lastcpu && pkgdev->work_scheduled)
pkg_thermal_schedule_work(target, &pkgdev->work);
}
mutex_unlock(&phy_dev_list_mutex);
spin_unlock_irq(&pkg_temp_lock);
/* Final cleanup if this is the last cpu */
if (lastcpu)
kfree(pkgdev);
return 0;
}
static int get_core_online(unsigned int cpu)
static int pkg_thermal_cpu_online(unsigned int cpu)
{
struct pkg_device *pkgdev = pkg_temp_thermal_get_dev(cpu);
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu);
/* Check if there is already an instance for this package */
if (!phdev) {
if (!cpu_has(c, X86_FEATURE_DTHERM) ||
!cpu_has(c, X86_FEATURE_PTS))
/* Paranoia check */
if (!cpu_has(c, X86_FEATURE_DTHERM) || !cpu_has(c, X86_FEATURE_PTS))
return -ENODEV;
if (pkg_temp_thermal_device_add(cpu))
return -ENODEV;
} else {
mutex_lock(&phy_dev_list_mutex);
++phdev->ref_cnt;
pr_debug("get_core_online: cpu %d ref_cnt %d\n",
cpu, phdev->ref_cnt);
mutex_unlock(&phy_dev_list_mutex);
}
INIT_DELAYED_WORK(&per_cpu(pkg_temp_thermal_threshold_work, cpu),
pkg_temp_thermal_threshold_work_fn);
pr_debug("get_core_online: cpu %d successful\n", cpu);
/* If the package exists, nothing to do */
if (pkgdev) {
cpumask_set_cpu(cpu, &pkgdev->cpumask);
return 0;
}
static void put_core_offline(unsigned int cpu)
{
if (!pkg_temp_thermal_device_remove(cpu))
cancel_delayed_work_sync(
&per_cpu(pkg_temp_thermal_threshold_work, cpu));
pr_debug("put_core_offline: cpu %d\n", cpu);
}
static int pkg_temp_thermal_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long) hcpu;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
get_core_online(cpu);
break;
case CPU_DOWN_PREPARE:
put_core_offline(cpu);
break;
}
return NOTIFY_OK;
return pkg_temp_thermal_device_add(cpu);
}
static struct notifier_block pkg_temp_thermal_notifier __refdata = {
.notifier_call = pkg_temp_thermal_cpu_callback,
};
static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = {
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_PTS },
{}
......@@ -580,71 +510,46 @@ MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);
static int __init pkg_temp_thermal_init(void)
{
int i;
int ret;
if (!x86_match_cpu(pkg_temp_thermal_ids))
return -ENODEV;
spin_lock_init(&pkg_work_lock);
platform_thermal_package_notify =
pkg_temp_thermal_platform_thermal_notify;
platform_thermal_package_rate_control =
pkg_temp_thermal_platform_thermal_rate_control;
max_packages = topology_max_packages();
packages = kzalloc(max_packages * sizeof(struct pkg_device *), GFP_KERNEL);
if (!packages)
return -ENOMEM;
cpu_notifier_register_begin();
for_each_online_cpu(i)
if (get_core_online(i))
goto err_ret;
__register_hotcpu_notifier(&pkg_temp_thermal_notifier);
cpu_notifier_register_done();
ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "thermal/x86_pkg:online",
pkg_thermal_cpu_online, pkg_thermal_cpu_offline);
if (ret < 0)
goto err;
pkg_temp_debugfs_init(); /* Don't care if fails */
/* Store the state for module exit */
pkg_thermal_hp_state = ret;
return 0;
platform_thermal_package_notify = pkg_thermal_notify;
platform_thermal_package_rate_control = pkg_thermal_rate_control;
err_ret:
for_each_online_cpu(i)
put_core_offline(i);
cpu_notifier_register_done();
kfree(pkg_work_scheduled);
platform_thermal_package_notify = NULL;
platform_thermal_package_rate_control = NULL;
/* Don't care if it fails */
pkg_temp_debugfs_init();
return 0;
return -ENODEV;
err:
kfree(packages);
return ret;
}
module_init(pkg_temp_thermal_init)
static void __exit pkg_temp_thermal_exit(void)
{
struct phy_dev_entry *phdev, *n;
int i;
cpu_notifier_register_begin();
__unregister_hotcpu_notifier(&pkg_temp_thermal_notifier);
mutex_lock(&phy_dev_list_mutex);
list_for_each_entry_safe(phdev, n, &phy_dev_list, list) {
/* Retore old MSR value for package thermal interrupt */
wrmsr_on_cpu(phdev->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT,
phdev->start_pkg_therm_low,
phdev->start_pkg_therm_high);
thermal_zone_device_unregister(phdev->tzone);
list_del(&phdev->list);
kfree(phdev);
}
mutex_unlock(&phy_dev_list_mutex);
platform_thermal_package_notify = NULL;
platform_thermal_package_rate_control = NULL;
for_each_online_cpu(i)
cancel_delayed_work_sync(
&per_cpu(pkg_temp_thermal_threshold_work, i));
cpu_notifier_register_done();
kfree(pkg_work_scheduled);
cpuhp_remove_state(pkg_thermal_hp_state);
debugfs_remove_recursive(debugfs);
kfree(packages);
}
module_init(pkg_temp_thermal_init)
module_exit(pkg_temp_thermal_exit)
MODULE_DESCRIPTION("X86 PKG TEMP Thermal Driver");
......
......@@ -20,7 +20,6 @@
#include <linux/devfreq.h>
#include <linux/thermal.h>
#ifdef CONFIG_DEVFREQ_THERMAL
/**
* struct devfreq_cooling_power - Devfreq cooling power ops
......@@ -37,12 +36,16 @@
* @dyn_power_coeff * frequency * voltage^2
*/
struct devfreq_cooling_power {
unsigned long (*get_static_power)(unsigned long voltage);
unsigned long (*get_dynamic_power)(unsigned long freq,
unsigned long (*get_static_power)(struct devfreq *devfreq,
unsigned long voltage);
unsigned long (*get_dynamic_power)(struct devfreq *devfreq,
unsigned long freq,
unsigned long voltage);
unsigned long dyn_power_coeff;
};
#ifdef CONFIG_DEVFREQ_THERMAL
struct thermal_cooling_device *
of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
struct devfreq_cooling_power *dfc_power);
......
......@@ -28,6 +28,7 @@
#include <linux/of.h>
#include <linux/idr.h>
#include <linux/device.h>
#include <linux/sysfs.h>
#include <linux/workqueue.h>
#include <uapi/linux/thermal.h>
......@@ -204,6 +205,7 @@ struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
struct attribute_group trips_attribute_group;
struct thermal_attr *trip_temp_attrs;
struct thermal_attr *trip_type_attrs;
struct thermal_attr *trip_hyst_attrs;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment