Merge branch 'remotes/lorenzo/pci/dwc'
- Fix designware-ep Header Type check (Hou Zhiqiang) - Use DBI accessors instead of own config accessors (Rob Herring) - Allow overriding bridge pci_ops (Rob Herring) - Allow root and child buses to have different pci_ops (Rob Herring) - Add default dwc pci_ops.map_bus (Rob Herring) - Use pci_ops for root config space accessors in al, exynos, histb, keystone, kirin, meson, tegra (Rob Herring) - Remove dwc own/other config accessor ops (Rob Herring) - Use generic config accessors in dwc (Rob Herring) - Also call .add_bus() callback for root bus (Rob Herring) - Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob Herring) - Convert dwc to use pci_host_probe() (Rob Herring) - Remove dwc root_bus pointer (Rob Herring) - Remove storing of PCI resources in dwc-specific structs (Rob Herring) - Simplify config space handling (Rob Herring) - Drop keystone duplicated DT num-viewport handling (Rob Herring) - Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in all the drivers (Rob Herring) - Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob Herring) - Add dwc num_lanes for use when it's lacking from DT (Rob Herring) - Ensure "Fast Link Mode" simulation environment setting is cleared (Rob Herring) - Drop meson duplicate number of lanes setup (Rob Herring) - Drop meson unnecessary RC config space init (Rob Herring) - Rework meson config and dwc port logic register accesses (Rob Herring) - Use common PCI register definitions in imx6 and qcom (Rob Herring) - Search for DesignWare PCIe Capability instead of hard-coding its location (Rob Herring) - Use common DesignWare register definitions in tegra (Rob Herring) - Drop keystone unused DBI2 code (Rob Herring) - Make dwc ATU accessors private (Rob Herring) - Centralize link gen setting in dwc (Rob Herring) - Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring) - Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring) - Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob Herring) - Drop intel-gw unused max_width (Rob Herring) - Move N_FTS (fast training sequence) setup to common dwc setup (Rob Herring) - Convert spear13xx, tegra194 to use DBI accessors (Rob Herring) - Add multiple PFs support for DWC (Xiaowei Bao) - Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao) - Update MSI/MSI-X capability management for endpoints (Xiaowei Bao) - Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao) - Update layerscape MSI/MSI-X management (Xiaowei Bao) - Use doorbell to support MSI-X on layerscape (Xiaowei Bao) - Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei Bao) - Add layerscape ls1088a node to DT (Xiaowei Bao) - Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao) - Add endpoint test driver data for Layerscape PCIe controllers (Hou Zhiqiang) - Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel) - Add uniphier iATU register description (Kunihiko Hayashi) - Add common iATU register support (Kunihiko Hayashi) - Remove keystone iATU register mapping in favor of generic dwc support (Kunihiko Hayashi) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Fix MSI page leakage in suspend/resume (Jisheng Zhang) - Check whether link is up before attempting config access (best-effort fix even though it's racy) (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI: dwc: Fix MSI page leakage in suspend/resume PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled PCI: keystone: Remove iATU register mapping PCI: dwc: Add common iATU register support dt-bindings: PCI: uniphier-ep: Add iATU register description dt-bindings: PCI: uniphier: Add iATU register description PCI: dwc: Fix 'cast truncates bits from constant value' misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers misc: pci_endpoint_test: Add LS1088a in pci_device_id table PCI: layerscape: Add EP mode support for ls1088a and ls2088a PCI: layerscape: Modify the MSIX to the doorbell mode PCI: layerscape: Modify the way of getting capability with different PEX PCI: layerscape: Fix some format issue of the code dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a PCI: designware-ep: Modify MSI and MSIX CAP way of finding PCI: designware-ep: Move the function of getting MSI capability forward PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode PCI: designware-ep: Add multiple PFs support for DWC PCI: dwc: Use DBI accessors PCI: dwc: Move N_FTS setup to common setup PCI: dwc/intel-gw: Drop unused max_width PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup() PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code PCI: dwc: Centralize link gen setting PCI: dwc: Make ATU accessors private PCI: dwc: Remove read_dbi2 code PCI: dwc/tegra: Use common Designware port logic register definitions PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset PCI: dwc/qcom: Use common PCI register definitions PCI: dwc/imx6: Use common PCI register definitions PCI: dwc/meson: Rework PCI config and DW port logic register accesses PCI: dwc/meson: Drop unnecessary RC config space initialization PCI: dwc/meson: Drop the duplicate number of lanes setup PCI: dwc: Ensure FAST_LINK_MODE is cleared PCI: dwc: Add a 'num_lanes' field to struct dw_pcie PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() PCI: dwc/keystone: Drop duplicated 'num-viewport' PCI: dwc: Simplify config space handling PCI: dwc: Remove storing of PCI resources PCI: dwc: Remove root_bus pointer PCI: dwc: Convert to use pci_host_probe() PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus PCI: Also call .add_bus() callback for root bus PCI: dwc: Use generic config accessors PCI: dwc: Remove dwc specific config accessor ops PCI: dwc: histb: Use pci_ops for root config space accessors PCI: dwc: exynos: Use pci_ops for root config space accessors PCI: dwc: kirin: Use pci_ops for root config space accessors PCI: dwc: meson: Use pci_ops for root config space accessors PCI: dwc: tegra: Use pci_ops for root config space accessors PCI: dwc: keystone: Use pci_ops for config space accessors PCI: dwc: al: Use pci_ops for child config space accessors PCI: dwc: Add a default pci_ops.map_bus for root port PCI: dwc: Allow overriding bridge pci_ops PCI: dwc: Use DBI accessors instead of own config accessors PCI: Allow root and child buses to have different pci_ops PCI: designware-ep: Fix the Header Type check
Showing
Please register or sign in to comment