Commit 92592c9c authored by Anoop P A's avatar Anoop P A Committed by Ralf Baechle

MIPS: MSP71xx: Add vectored interrupt support.

This patch will add vectored interrupt setups required for MIPS MT modes.
irq_cic has been restructured and moved per irq handler to different file.
irq_cic has been re wrote to support mips MT modes ( VSMP / SMTC )

[Ralf: fixed some more checkpatch warnings.]
Signed-off-by: default avatarAnoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
To: dhowells@redhat.com
Patchwork: https://patchwork.linux-mips.org/patch/2041/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 3b042d08
......@@ -6,7 +6,7 @@ obj-y += msp_prom.o msp_setup.o msp_irq.o \
obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o
obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o
obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
obj-$(CONFIG_PCI) += msp_pci.o
obj-$(CONFIG_MSPETH) += msp_eth.o
obj-$(CONFIG_USB_MSP71XX) += msp_usb.o
......@@ -19,8 +19,6 @@
#include <msp_int.h>
extern void msp_int_handle(void);
/* SLP bases systems */
extern void msp_slp_irq_init(void);
extern void msp_slp_irq_dispatch(void);
......@@ -29,6 +27,18 @@ extern void msp_slp_irq_dispatch(void);
extern void msp_cic_irq_init(void);
extern void msp_cic_irq_dispatch(void);
/* VSMP support init */
extern void msp_vsmp_int_init(void);
/* vectored interrupt implementation */
/* SW0/1 interrupts are used for SMP/SMTC */
static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); }
static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); }
static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); }
static inline void usb_int_dispatch(void) { do_IRQ(MSP_INT_USB); }
static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); }
/*
* The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded
* hierarchical system. The first level are the direct MIPS interrupts
......@@ -96,29 +106,57 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
do_IRQ(MSP_INT_SW1);
}
static struct irqaction cascade_msp = {
static struct irqaction cic_cascade_msp = {
.handler = no_action,
.name = "MSP cascade"
.name = "MSP CIC cascade"
};
static struct irqaction per_cascade_msp = {
.handler = no_action,
.name = "MSP PER cascade"
};
void __init arch_init_irq(void)
{
/* assume we'll be using vectored interrupt mode except in UP mode*/
#ifdef CONFIG_MIPS_MT
BUG_ON(!cpu_has_vint);
#endif
/* initialize the 1st-level CPU based interrupt controller */
mips_cpu_irq_init();
#ifdef CONFIG_IRQ_MSP_CIC
msp_cic_irq_init();
#ifdef CONFIG_MIPS_MT
set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch);
set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch);
set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch);
set_vi_handler(MSP_INT_SAR, mac2_int_dispatch);
set_vi_handler(MSP_INT_USB, usb_int_dispatch);
set_vi_handler(MSP_INT_SEC, sec_int_dispatch);
#ifdef CONFIG_MIPS_MT_SMP
msp_vsmp_int_init();
#elif defined CONFIG_MIPS_MT_SMTC
/*Set hwmask for all platform devices */
irq_hwmask[MSP_INT_MAC0] = C_IRQ0;
irq_hwmask[MSP_INT_MAC1] = C_IRQ1;
irq_hwmask[MSP_INT_USB] = C_IRQ2;
irq_hwmask[MSP_INT_SAR] = C_IRQ3;
irq_hwmask[MSP_INT_SEC] = C_IRQ5;
#endif /* CONFIG_MIPS_MT_SMP */
#endif /* CONFIG_MIPS_MT */
/* setup the cascaded interrupts */
setup_irq(MSP_INT_CIC, &cascade_msp);
setup_irq(MSP_INT_PER, &cascade_msp);
setup_irq(MSP_INT_CIC, &cic_cascade_msp);
setup_irq(MSP_INT_PER, &per_cascade_msp);
#else
/* setup the 2nd-level SLP register based interrupt controller */
/* VSMP /SMTC support support is not enabled for SLP */
msp_slp_irq_init();
/* setup the cascaded SLP/PER interrupts */
setup_irq(MSP_INT_SLP, &cascade_msp);
setup_irq(MSP_INT_PER, &cascade_msp);
setup_irq(MSP_INT_SLP, &cic_cascade_msp);
setup_irq(MSP_INT_PER, &per_cascade_msp);
#endif
}
/*
* This file define the irq handler for MSP SLM subsystem interrupts.
* Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
*
* Copyright 2005-2007 PMC-Sierra, Inc, derived from irq_cpu.c
* Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
* This file define the irq handler for MSP CIC subsystem interrupts.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -16,119 +15,212 @@
#include <linux/bitops.h>
#include <linux/irq.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <msp_cic_int.h>
#include <msp_regs.h>
/*
* NOTE: We are only enabling support for VPE0 right now.
* External API
*/
extern void msp_per_irq_init(void);
extern void msp_per_irq_dispatch(void);
static inline void unmask_msp_cic_irq(unsigned int irq)
{
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
*CIC_VPE0_MSK_REG |= (1 << (irq - MSP_CIC_INTBASE));
else
*PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
}
/*
* Convenience Macro. Should be somewhere generic.
*/
#define get_current_vpe() \
((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
#ifdef CONFIG_SMP
#define LOCK_VPE(flags, mtflags) \
do { \
local_irq_save(flags); \
mtflags = dmt(); \
} while (0)
#define UNLOCK_VPE(flags, mtflags) \
do { \
emt(mtflags); \
local_irq_restore(flags);\
} while (0)
#define LOCK_CORE(flags, mtflags) \
do { \
local_irq_save(flags); \
mtflags = dvpe(); \
} while (0)
#define UNLOCK_CORE(flags, mtflags) \
do { \
evpe(mtflags); \
local_irq_restore(flags);\
} while (0)
#else
#define LOCK_VPE(flags, mtflags)
#define UNLOCK_VPE(flags, mtflags)
#endif
static inline void mask_msp_cic_irq(unsigned int irq)
/* ensure writes to cic are completed */
static inline void cic_wmb(void)
{
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
*CIC_VPE0_MSK_REG &= ~(1 << (irq - MSP_CIC_INTBASE));
else
*PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG;
volatile u32 dummy_read;
wmb();
dummy_read = __raw_readl(cic_mem);
dummy_read++;
}
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
* to deal with concurrency issues. Same for msp_cic_irq_end.
*/
static inline void ack_msp_cic_irq(unsigned int irq)
static inline void unmask_cic_irq(unsigned int irq)
{
mask_msp_cic_irq(irq);
volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
int vpe;
#ifdef CONFIG_SMP
unsigned int mtflags;
unsigned long flags;
/*
* only really necessary for 18, 16-14 and sometimes 3:0 (since
* these can be edge sensitive) but it doesn't hurt for the others.
* Make sure we have IRQ affinity. It may have changed while
* we were processing the IRQ.
*/
if (!cpumask_test_cpu(smp_processor_id(), irq_desc[irq].affinity))
return;
#endif
/* check for PER interrupt range */
if (irq < MSP_PER_INTBASE)
vpe = get_current_vpe();
LOCK_VPE(flags, mtflags);
cic_msk_reg[vpe] |= (1 << (irq - MSP_CIC_INTBASE));
UNLOCK_VPE(flags, mtflags);
cic_wmb();
}
static inline void mask_cic_irq(unsigned int irq)
{
volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
int vpe = get_current_vpe();
#ifdef CONFIG_SMP
unsigned long flags, mtflags;
#endif
LOCK_VPE(flags, mtflags);
cic_msk_reg[vpe] &= ~(1 << (irq - MSP_CIC_INTBASE));
UNLOCK_VPE(flags, mtflags);
cic_wmb();
}
static inline void msp_cic_irq_ack(unsigned int irq)
{
mask_cic_irq(irq);
/*
* Only really necessary for 18, 16-14 and sometimes 3:0
* (since these can be edge sensitive) but it doesn't
* hurt for the others
*/
*CIC_STS_REG = (1 << (irq - MSP_CIC_INTBASE));
smtc_im_ack_irq(irq);
}
static void msp_cic_irq_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
unmask_cic_irq(irq);
}
/*Note: Limiting to VSMP . Not tested in SMTC */
#ifdef CONFIG_MIPS_MT_SMP
static inline int msp_cic_irq_set_affinity(unsigned int irq,
const struct cpumask *cpumask)
{
int cpu;
unsigned long flags;
unsigned int mtflags;
unsigned long imask = (1 << (irq - MSP_CIC_INTBASE));
volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
/* timer balancing should be disabled in kernel code */
BUG_ON(irq == MSP_INT_VPE0_TIMER || irq == MSP_INT_VPE1_TIMER);
LOCK_CORE(flags, mtflags);
/* enable if any of each VPE's TCs require this IRQ */
for_each_online_cpu(cpu) {
if (cpumask_test_cpu(cpu, cpumask))
cic_mask[cpu] |= imask;
else
*PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
cic_mask[cpu] &= ~imask;
}
UNLOCK_CORE(flags, mtflags);
return 0;
}
#endif
static struct irq_chip msp_cic_irq_controller = {
.name = "MSP_CIC",
.ack = ack_msp_cic_irq,
.mask = ack_msp_cic_irq,
.mask_ack = ack_msp_cic_irq,
.unmask = unmask_msp_cic_irq,
.mask = mask_cic_irq,
.mask_ack = msp_cic_irq_ack,
.unmask = unmask_cic_irq,
.ack = msp_cic_irq_ack,
.end = msp_cic_irq_end,
#ifdef CONFIG_MIPS_MT_SMP
.set_affinity = msp_cic_irq_set_affinity,
#endif
};
void __init msp_cic_irq_init(void)
{
int i;
/* Mask/clear interrupts. */
*CIC_VPE0_MSK_REG = 0x00000000;
*PER_INT_MSK_REG = 0x00000000;
*CIC_VPE1_MSK_REG = 0x00000000;
*CIC_STS_REG = 0xFFFFFFFF;
*PER_INT_STS_REG = 0xFFFFFFFF;
#if defined(CONFIG_PMC_MSP7120_GW) || \
defined(CONFIG_PMC_MSP7120_EVAL)
/*
* The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
* These inputs map to EXT_INT_POL[6:4] inside the CIC.
* They are to be active low, level sensitive.
*/
*CIC_EXT_CFG_REG &= 0xFFFF8F8F;
#endif
/* initialize all the IRQ descriptors */
for (i = MSP_CIC_INTBASE; i < MSP_PER_INTBASE + 32; i++)
for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) {
set_irq_chip_and_handler(i, &msp_cic_irq_controller,
handle_level_irq);
#ifdef CONFIG_MIPS_MT_SMTC
/* Mask of CIC interrupt */
irq_hwmask[i] = C_IRQ4;
#endif
}
/* Initialize the PER interrupt sub-system */
msp_per_irq_init();
}
/* CIC masked by CIC vector processing before dispatch called */
void msp_cic_irq_dispatch(void)
{
volatile u32 *cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG;
u32 cic_mask;
u32 pending;
int intbase;
intbase = MSP_CIC_INTBASE;
pending = *CIC_STS_REG & *CIC_VPE0_MSK_REG;
/* check for PER interrupt */
if (pending == (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
intbase = MSP_PER_INTBASE;
pending = *PER_INT_STS_REG & *PER_INT_MSK_REG;
}
/* check for spurious interrupt */
if (pending == 0x00000000) {
printk(KERN_ERR
"Spurious %s interrupt? status %08x, mask %08x\n",
(intbase == MSP_CIC_INTBASE) ? "CIC" : "PER",
(intbase == MSP_CIC_INTBASE) ?
*CIC_STS_REG : *PER_INT_STS_REG,
(intbase == MSP_CIC_INTBASE) ?
*CIC_VPE0_MSK_REG : *PER_INT_MSK_REG);
return;
}
/* check for the timer and dispatch it first */
if ((intbase == MSP_CIC_INTBASE) &&
(pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))))
int cic_status = *CIC_STS_REG;
cic_mask = cic_msk_reg[get_current_vpe()];
pending = cic_status & cic_mask;
if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) {
do_IRQ(MSP_INT_VPE0_TIMER);
else
do_IRQ(ffs(pending) + intbase - 1);
} else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) {
do_IRQ(MSP_INT_VPE1_TIMER);
} else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
msp_per_irq_dispatch();
} else if (pending) {
do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1);
} else{
spurious_interrupt();
/* Re-enable the CIC cascaded interrupt. */
irq_desc[MSP_INT_CIC].chip->end(MSP_INT_CIC);
}
}
/*
* Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
*
* This file define the irq handler for MSP PER subsystem interrupts.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <msp_cic_int.h>
#include <msp_regs.h>
/*
* Convenience Macro. Should be somewhere generic.
*/
#define get_current_vpe() \
((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
#ifdef CONFIG_SMP
/*
* The PER registers must be protected from concurrent access.
*/
static DEFINE_SPINLOCK(per_lock);
#endif
/* ensure writes to per are completed */
static inline void per_wmb(void)
{
const volatile void __iomem *per_mem = PER_INT_MSK_REG;
volatile u32 dummy_read;
wmb();
dummy_read = __raw_readl(per_mem);
dummy_read++;
}
static inline void unmask_per_irq(unsigned int irq)
{
#ifdef CONFIG_SMP
unsigned long flags;
spin_lock_irqsave(&per_lock, flags);
*PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
spin_unlock_irqrestore(&per_lock, flags);
#else
*PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
#endif
per_wmb();
}
static inline void mask_per_irq(unsigned int irq)
{
#ifdef CONFIG_SMP
unsigned long flags;
spin_lock_irqsave(&per_lock, flags);
*PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
spin_unlock_irqrestore(&per_lock, flags);
#else
*PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
#endif
per_wmb();
}
static inline void msp_per_irq_enable(unsigned int irq)
{
unmask_per_irq(irq);
}
static inline void msp_per_irq_disable(unsigned int irq)
{
mask_per_irq(irq);
}
static unsigned int msp_per_irq_startup(unsigned int irq)
{
msp_per_irq_enable(irq);
return 0;
}
#define msp_per_irq_shutdown msp_per_irq_disable
static inline void msp_per_irq_ack(unsigned int irq)
{
mask_per_irq(irq);
/*
* In the PER interrupt controller, only bits 11 and 10
* are write-to-clear, (SPI TX complete, SPI RX complete).
* It does nothing for any others.
*/
*PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
/* Re-enable the CIC cascaded interrupt and return */
irq_desc[MSP_INT_CIC].chip->end(MSP_INT_CIC);
}
static void msp_per_irq_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
unmask_per_irq(irq);
}
#ifdef CONFIG_SMP
static inline int msp_per_irq_set_affinity(unsigned int irq,
const struct cpumask *affinity)
{
unsigned long flags;
/*
* Calls to ack, end, startup, enable are spinlocked in setup_irq and
* __do_IRQ.Callers of this function do not spinlock,so we need to
* do so ourselves.
*/
raw_spin_lock_irqsave(&irq_desc[irq].lock, flags);
msp_per_irq_enable(irq);
raw_spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
return 0;
}
#endif
static struct irq_chip msp_per_irq_controller = {
.name = "MSP_PER",
.startup = msp_per_irq_startup,
.shutdown = msp_per_irq_shutdown,
.enable = msp_per_irq_enable,
.disable = msp_per_irq_disable,
#ifdef CONFIG_SMP
.set_affinity = msp_per_irq_set_affinity,
#endif
.ack = msp_per_irq_ack,
.end = msp_per_irq_end,
};
void __init msp_per_irq_init(void)
{
int i;
/* Mask/clear interrupts. */
*PER_INT_MSK_REG = 0x00000000;
*PER_INT_STS_REG = 0xFFFFFFFF;
/* initialize all the IRQ descriptors */
for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
irq_desc[i].chip = &msp_per_irq_controller;
#ifdef CONFIG_MIPS_MT_SMTC
irq_hwmask[i] = C_IRQ4;
#endif
}
}
void msp_per_irq_dispatch(void)
{
u32 per_mask = *PER_INT_MSK_REG;
u32 per_status = *PER_INT_STS_REG;
u32 pending;
pending = per_status & per_mask;
if (pending) {
do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1);
} else {
spurious_interrupt();
/* Re-enable the CIC cascaded interrupt and return */
irq_desc[MSP_INT_CIC].chip->end(MSP_INT_CIC);
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment