ptp: clockmatrix: use rsmu driver to access i2c/spi bus

rsmu (Renesas Synchronization Management Unit ) driver is located in
drivers/mfd and responsible for creating multiple devices including
clockmatrix phc, which will then use the exposed regmap and mutex
handle to access i2c/spi bus.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ptp/ptp_clockmatrix.h

@@ -9,8 +9,8 @@
 #define PTP_IDTCLOCKMATRIX_H
 
 #include <linux/ktime.h>
-
-#include "idt8a340_reg.h"
+#include <linux/mfd/idt8a340_reg.h>
+#include <linux/regmap.h>
 
 #define FW_FILENAME	"idtcm.bin"
 #define MAX_TOD		(4)
@@ -44,7 +44,6 @@
 #define DEFAULT_TOD2_PTP_PLL		(2)
 #define DEFAULT_TOD3_PTP_PLL		(3)
 
-#define POST_SM_RESET_DELAY_MS			(3000)
 #define PHASE_PULL_IN_THRESHOLD_NS_DEPRECATED	(150000)
 #define PHASE_PULL_IN_THRESHOLD_NS		(15000)
 #define TOD_WRITE_OVERHEAD_COUNT_MAX		(2)
@@ -64,6 +63,11 @@
  * Return register address based on passed in firmware version
  */
 #define IDTCM_FW_REG(FW, VER, REG)	(((FW) < (VER)) ? (REG) : (REG##_##VER))
+enum fw_version {
+	V_DEFAULT = 0,
+	V487 = 1,
+	V520 = 2,
+};
 
 /* PTP PLL Mode */
 enum ptp_pll_mode {
@@ -74,94 +78,6 @@ enum ptp_pll_mode {
 	PTP_PLL_MODE_MAX = PTP_PLL_MODE_UNSUPPORTED,
 };
 
-/* Values of DPLL_N.DPLL_MODE.PLL_MODE */
-enum pll_mode {
-	PLL_MODE_MIN = 0,
-	PLL_MODE_PLL = PLL_MODE_MIN,
-	PLL_MODE_WRITE_PHASE = 1,
-	PLL_MODE_WRITE_FREQUENCY = 2,
-	PLL_MODE_GPIO_INC_DEC = 3,
-	PLL_MODE_SYNTHESIS = 4,
-	PLL_MODE_PHASE_MEASUREMENT = 5,
-	PLL_MODE_DISABLED = 6,
-	PLL_MODE_MAX = PLL_MODE_DISABLED,
-};
-
-/* Values of DPLL_CTRL_n.DPLL_MANU_REF_CFG.MANUAL_REFERENCE */
-enum manual_reference {
-	MANU_REF_MIN = 0,
-	MANU_REF_CLK0 = MANU_REF_MIN,
-	MANU_REF_CLK1,
-	MANU_REF_CLK2,
-	MANU_REF_CLK3,
-	MANU_REF_CLK4,
-	MANU_REF_CLK5,
-	MANU_REF_CLK6,
-	MANU_REF_CLK7,
-	MANU_REF_CLK8,
-	MANU_REF_CLK9,
-	MANU_REF_CLK10,
-	MANU_REF_CLK11,
-	MANU_REF_CLK12,
-	MANU_REF_CLK13,
-	MANU_REF_CLK14,
-	MANU_REF_CLK15,
-	MANU_REF_WRITE_PHASE,
-	MANU_REF_WRITE_FREQUENCY,
-	MANU_REF_XO_DPLL,
-	MANU_REF_MAX = MANU_REF_XO_DPLL,
-};
-
-enum hw_tod_write_trig_sel {
-	HW_TOD_WR_TRIG_SEL_MIN = 0,
-	HW_TOD_WR_TRIG_SEL_MSB = HW_TOD_WR_TRIG_SEL_MIN,
-	HW_TOD_WR_TRIG_SEL_RESERVED = 1,
-	HW_TOD_WR_TRIG_SEL_TOD_PPS = 2,
-	HW_TOD_WR_TRIG_SEL_IRIGB_PPS = 3,
-	HW_TOD_WR_TRIG_SEL_PWM_PPS = 4,
-	HW_TOD_WR_TRIG_SEL_GPIO = 5,
-	HW_TOD_WR_TRIG_SEL_FOD_SYNC = 6,
-	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_FOD_SYNC,
-};
-
-/* 4.8.7 only */
-enum scsr_tod_write_trig_sel {
-	SCSR_TOD_WR_TRIG_SEL_DISABLE = 0,
-	SCSR_TOD_WR_TRIG_SEL_IMMEDIATE = 1,
-	SCSR_TOD_WR_TRIG_SEL_REFCLK = 2,
-	SCSR_TOD_WR_TRIG_SEL_PWMPPS = 3,
-	SCSR_TOD_WR_TRIG_SEL_TODPPS = 4,
-	SCSR_TOD_WR_TRIG_SEL_SYNCFOD = 5,
-	SCSR_TOD_WR_TRIG_SEL_GPIO = 6,
-	SCSR_TOD_WR_TRIG_SEL_MAX = SCSR_TOD_WR_TRIG_SEL_GPIO,
-};
-
-/* 4.8.7 only */
-enum scsr_tod_write_type_sel {
-	SCSR_TOD_WR_TYPE_SEL_ABSOLUTE = 0,
-	SCSR_TOD_WR_TYPE_SEL_DELTA_PLUS = 1,
-	SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS = 2,
-	SCSR_TOD_WR_TYPE_SEL_MAX = SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS,
-};
-
-/* Values STATUS.DPLL_SYS_STATUS.DPLL_SYS_STATE */
-enum dpll_state {
-	DPLL_STATE_MIN = 0,
-	DPLL_STATE_FREERUN = DPLL_STATE_MIN,
-	DPLL_STATE_LOCKACQ = 1,
-	DPLL_STATE_LOCKREC = 2,
-	DPLL_STATE_LOCKED = 3,
-	DPLL_STATE_HOLDOVER = 4,
-	DPLL_STATE_OPEN_LOOP = 5,
-	DPLL_STATE_MAX = DPLL_STATE_OPEN_LOOP,
-};
-
-enum fw_version {
-	V_DEFAULT = 0,
-	V487 = 1,
-	V520 = 2,
-};
-
 struct idtcm;
 
 struct idtcm_channel {
@@ -185,25 +101,32 @@ struct idtcm_channel {
 						    s32 offset_ns, u32 max_ffo_ppb);
 	s32			current_freq_scaled_ppm;
 	bool			phase_pull_in;
+	u32			dco_delay;
+	/* last input trigger for extts */
+	u8			refn;
 	u8			pll;
 	u16			output_mask;
 };
 
 struct idtcm {
 	struct idtcm_channel	channel[MAX_TOD];
-	struct i2c_client	*client;
-	u8			page_offset;
+	struct device		*dev;
 	u8			tod_mask;
 	char			version[16];
 	enum fw_version		fw_ver;
-
+	/* Polls for external time stamps */
+	u8			extts_mask;
+	struct delayed_work	extts_work;
+	/* Remember the ptp channel to report extts */
+	struct idtcm_channel	*event_channel[MAX_TOD];
+	/* Mutex to protect operations from being interrupted */
+	struct mutex		*lock;
+	struct device		*mfd;
+	struct regmap		*regmap;
 	/* Overhead calculation for adjtime */
 	u8			calculate_overhead_flag;
 	s64			tod_write_overhead_ns;
 	ktime_t			start_time;
-
-	/* Protects I2C read/modify/write registers from concurrent access */
-	struct mutex		reg_lock;
 };
 
 struct idtcm_fwrc {

include/linux/mfd/idt8a340_reg.h

@@ -506,6 +506,10 @@
 #define STATE_MODE_SHIFT                  (0)
 #define STATE_MODE_MASK                   (0x7)
 
+/* Bit definitions for the DPLL_MANU_REF_CFG register */
+#define MANUAL_REFERENCE_SHIFT            (0)
+#define MANUAL_REFERENCE_MASK             (0x1f)
+
 /* Bit definitions for the GPIO_CFG_GBL register */
 #define SUPPLY_MODE_SHIFT                 (0)
 #define SUPPLY_MODE_MASK                  (0x3)
@@ -654,7 +658,7 @@
 /* Values of DPLL_N.DPLL_MODE.PLL_MODE */
 enum pll_mode {
 	PLL_MODE_MIN = 0,
-	PLL_MODE_NORMAL = PLL_MODE_MIN,
+	PLL_MODE_PLL = PLL_MODE_MIN,
 	PLL_MODE_WRITE_PHASE = 1,
 	PLL_MODE_WRITE_FREQUENCY = 2,
 	PLL_MODE_GPIO_INC_DEC = 3,
@@ -664,6 +668,31 @@ enum pll_mode {
 	PLL_MODE_MAX = PLL_MODE_DISABLED,
 };
 
+/* Values of DPLL_CTRL_n.DPLL_MANU_REF_CFG.MANUAL_REFERENCE */
+enum manual_reference {
+	MANU_REF_MIN = 0,
+	MANU_REF_CLK0 = MANU_REF_MIN,
+	MANU_REF_CLK1,
+	MANU_REF_CLK2,
+	MANU_REF_CLK3,
+	MANU_REF_CLK4,
+	MANU_REF_CLK5,
+	MANU_REF_CLK6,
+	MANU_REF_CLK7,
+	MANU_REF_CLK8,
+	MANU_REF_CLK9,
+	MANU_REF_CLK10,
+	MANU_REF_CLK11,
+	MANU_REF_CLK12,
+	MANU_REF_CLK13,
+	MANU_REF_CLK14,
+	MANU_REF_CLK15,
+	MANU_REF_WRITE_PHASE,
+	MANU_REF_WRITE_FREQUENCY,
+	MANU_REF_XO_DPLL,
+	MANU_REF_MAX = MANU_REF_XO_DPLL,
+};
+
 enum hw_tod_write_trig_sel {
 	HW_TOD_WR_TRIG_SEL_MIN = 0,
 	HW_TOD_WR_TRIG_SEL_MSB = HW_TOD_WR_TRIG_SEL_MIN,