printk: remove safe buffers

With @logbuf_lock removed, the high level printk functions for
storing messages are lockless. Messages can be stored from any
context, so there is no need for the NMI and safe buffers anymore.
Remove the NMI and safe buffers.

Although the safe buffers are removed, the NMI and safe context
tracking is still in place. In these contexts, store the message
immediately but still use irq_work to defer the console printing.

Since printk recursion tracking is in place, safe context tracking
for most of printk is not needed. Remove it. Only safe context
tracking relating to the console and console_owner locks is left
in place. This is because the console and console_owner locks are
needed for the actual printing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210715193359.25946-4-john.ogness@linutronix.de

arch/powerpc/kernel/traps.c

@@ -170,7 +170,6 @@ extern void panic_flush_kmsg_start(void)
 
 extern void panic_flush_kmsg_end(void)
 {
-	printk_safe_flush_on_panic();
 	kmsg_dump(KMSG_DUMP_PANIC);
 	bust_spinlocks(0);
 	debug_locks_off();

arch/powerpc/kernel/watchdog.c

@@ -183,11 +183,6 @@ static void watchdog_smp_panic(int cpu, u64 tb)
 
 	wd_smp_unlock(&flags);
 
-	printk_safe_flush();
-	/*
-	 * printk_safe_flush() seems to require another print
-	 * before anything actually goes out to console.
-	 */
 	if (sysctl_hardlockup_all_cpu_backtrace)
 		trigger_allbutself_cpu_backtrace();
 

include/linux/printk.h

@@ -208,8 +208,6 @@ void dump_stack_print_info(const char *log_lvl);
 void show_regs_print_info(const char *log_lvl);
 extern asmlinkage void dump_stack_lvl(const char *log_lvl) __cold;
 extern asmlinkage void dump_stack(void) __cold;
-extern void printk_safe_flush(void);
-extern void printk_safe_flush_on_panic(void);
 #else
 static inline __printf(1, 0)
 int vprintk(const char *s, va_list args)
@@ -277,14 +275,6 @@ static inline void dump_stack_lvl(const char *log_lvl)
 static inline void dump_stack(void)
 {
 }
-
-static inline void printk_safe_flush(void)
-{
-}
-
-static inline void printk_safe_flush_on_panic(void)
-{
-}
 #endif
 
 #ifdef CONFIG_SMP

kernel/kexec_core.c

@@ -978,7 +978,6 @@ void crash_kexec(struct pt_regs *regs)
 	old_cpu = atomic_cmpxchg(&panic_cpu, PANIC_CPU_INVALID, this_cpu);
 	if (old_cpu == PANIC_CPU_INVALID) {
 		/* This is the 1st CPU which comes here, so go ahead. */
-		printk_safe_flush_on_panic();
 		__crash_kexec(regs);
 
 		/*

kernel/panic.c

@@ -247,7 +247,6 @@ void panic(const char *fmt, ...)
 	 * Bypass the panic_cpu check and call __crash_kexec directly.
 	 */
 	if (!_crash_kexec_post_notifiers) {
-		printk_safe_flush_on_panic();
 		__crash_kexec(NULL);
 
 		/*
@@ -271,8 +270,6 @@ void panic(const char *fmt, ...)
 	 */
 	atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
 
-	/* Call flush even twice. It tries harder with a single online CPU */
-	printk_safe_flush_on_panic();
 	kmsg_dump(KMSG_DUMP_PANIC);
 
 	/*

kernel/printk/internal.h

@@ -22,7 +22,6 @@ __printf(1, 0) int vprintk_deferred(const char *fmt, va_list args);
 void __printk_safe_enter(void);
 void __printk_safe_exit(void);
 
-void printk_safe_init(void);
 bool printk_percpu_data_ready(void);
 
 #define printk_safe_enter_irqsave(flags)	\
@@ -37,18 +36,6 @@ bool printk_percpu_data_ready(void);
 		local_irq_restore(flags);	\
 	} while (0)
 
-#define printk_safe_enter_irq()		\
-	do {					\
-		local_irq_disable();		\
-		__printk_safe_enter();		\
-	} while (0)
-
-#define printk_safe_exit_irq()			\
-	do {					\
-		__printk_safe_exit();		\
-		local_irq_enable();		\
-	} while (0)
-
 void defer_console_output(void);
 
 #else
@@ -61,9 +48,5 @@ void defer_console_output(void);
 #define printk_safe_enter_irqsave(flags) local_irq_save(flags)
 #define printk_safe_exit_irqrestore(flags) local_irq_restore(flags)
 
-#define printk_safe_enter_irq() local_irq_disable()
-#define printk_safe_exit_irq() local_irq_enable()
-
-static inline void printk_safe_init(void) { }
 static inline bool printk_percpu_data_ready(void) { return false; }
 #endif /* CONFIG_PRINTK */

lib/nmi_backtrace.c

@@ -75,12 +75,6 @@ void nmi_trigger_cpumask_backtrace(const cpumask_t *mask,
 		touch_softlockup_watchdog();
 	}
 
-	/*
-	 * Force flush any remote buffers that might be stuck in IRQ context
-	 * and therefore could not run their irq_work.
-	 */
-	printk_safe_flush();
-
 	clear_bit_unlock(0, &backtrace_flag);
 	put_cpu();
 }