Skip to content

L
linux
Commit 93e2b95c authored by Holger Brunck's avatar Holger Brunck Committed by Kumar Gala
Browse files
Options

powerpc/83xx: rename and update kmeter1 

Beside the MPC 8360 based board kmeter1 other km83xx boards
from keymile will follow. Therefore the board specific naming
kmeter1 for functions and files were replaced with km83xx.
Additionally some updates were made:
    - update defconfig for 2.6.38
    - rework flash partitioning in dts file
    - add gpio controller for qe_pio_c in dts
Signed-off-by: default avatarHolger Brunck <holger.brunck@keymile.com>
Acked-by: default avatarHeiko Schocher <hs@denx.de>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Heiko Schocher <hs@denx.de>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent ac6f1203
Show whitespace changes
Inline Side-by-side
Showing with 71 additions and 53 deletions
arch/powerpc/boot/dts/kmeter1.dts
View file @ 93e2b95c
/*
* Keymile KMETER1 Device Tree Source
*
* 2008 DENX Software Engineering GmbH
* 2008-2011 DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -70,11 +70,11 @@ i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
compatible = "fsl,mpc8313-i2c","fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
clock-frequency = <400000>;
};
serial0: serial@4500 {
......@@ -137,6 +137,13 @@ par_io@1400 {
compatible = "fsl,mpc8360-par_io";
num-ports = <7>;
qe_pio_c: gpio-controller@30 {
#gpio-cells = <2>;
compatible = "fsl,mpc8360-qe-pario-bank",
"fsl,mpc8323-qe-pario-bank";
reg = <0x1430 0x18>;
gpio-controller;
};
pio_ucc1: ucc_pin@0 {
reg = <0>;
......@@ -472,7 +479,17 @@ qeic: interrupt-controller@80 {
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <32 8 33 8>;
big-endian;
interrupts = <
32 0x8
33 0x8
34 0x8
35 0x8
40 0x8
41 0x8
42 0x8
43 0x8
>;
interrupt-parent = <&ipic>;
};
};
......@@ -484,43 +501,31 @@ localbus@e0005000 {
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0 0 0xf0000000 0x04000000>; /* Filled in by U-Boot */
ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */
1 0 0xe8000000 0x01000000 /* LB 1 */
3 0 0xa0000000 0x10000000>; /* LB 3 */
flash@f0000000,0 {
flash@0,0 {
compatible = "cfi-flash";
/*
* The Intel P30 chip has 2 non-identical chips on
* one die, so we need to define 2 separate regions
* that are scanned by physmap_of independantly.
*/
reg = <0 0x00000000 0x02000000
0 0x02000000 0x02000000>; /* Filled in by U-Boot */
bank-width = <2>;
reg = <0 0 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
bank-width = <2>;
partition@0 { /* 768KB */
label = "u-boot";
reg = <0 0x40000>;
reg = <0 0xC0000>;
};
partition@40000 {
partition@c0000 { /* 128KB */
label = "env";
reg = <0x40000 0x40000>;
};
partition@80000 {
label = "dtb";
reg = <0x80000 0x20000>;
};
partition@a0000 {
label = "kernel";
reg = <0xa0000 0x300000>;
reg = <0xC0000 0x20000>;
};
partition@3a0000 {
label = "ramdisk";
reg = <0x3a0000 0x800000>;
partition@e0000 { /* 128KB */
label = "envred";
reg = <0xE0000 0x20000>;
};
partition@ba0000 {
label = "user";
reg = <0xba0000 0x3460000>;
partition@100000 { /* 64512KB */
label = "ubi0";
reg = <0x100000 0x3F00000>;
};
};
};
......
arch/powerpc/configs/83xx/kmeter1_defconfig
View file @ 93e2b95c
......@@ -2,6 +2,7 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_HOTPLUG is not set
......@@ -18,7 +19,6 @@ CONFIG_KMETER1=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_SPARSE_IRQ=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
CONFIG_PACKET=y
......@@ -37,7 +37,6 @@ CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
......@@ -49,13 +48,12 @@ CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_DEBUG=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_TUN=y
CONFIG_MII=y
CONFIG_MARVELL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_UCC_GETH=y
# CONFIG_NETDEV_10000 is not set
CONFIG_WAN=y
......@@ -77,7 +75,6 @@ CONFIG_I2C_MPC=y
# CONFIG_USB_SUPPORT is not set
CONFIG_UIO=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
......
arch/powerpc/platforms/83xx/Makefile
View file @ 93e2b95c
......@@ -16,4 +16,4 @@ obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o
obj-$(CONFIG_SBC834x) += sbc834x.o
obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o
obj-$(CONFIG_ASP834x) += asp834x.o
obj-$(CONFIG_KMETER1) += kmeter1.o
obj-$(CONFIG_KMETER1) += km83xx.o
arch/powerpc/platforms/83xx/kmeter1.c → arch/powerpc/platforms/83xx/km83xx.c
View file @ 93e2b95c
/*
* Copyright 2008 DENX Software Engineering GmbH
* Copyright 2008-2011 DENX Software Engineering GmbH
* Author: Heiko Schocher <hs@denx.de>
*
* Description:
......@@ -49,12 +49,12 @@
* Setup the architecture
*
*/
static void __init kmeter1_setup_arch(void)
static void __init mpc83xx_km_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("kmeter1_setup_arch()", 0);
ppc_md.progress("kmpbec83xx_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
......@@ -69,6 +69,9 @@ static void __init kmeter1_setup_arch(void)
par_io_init(np);
of_node_put(np);
for_each_node_by_name(np, "spi")
par_io_of_config(np);
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
par_io_of_config(np);
}
......@@ -119,7 +122,7 @@ static void __init kmeter1_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
static struct of_device_id kmeter_ids[] = {
static struct of_device_id kmpbec83xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
......@@ -131,13 +134,13 @@ static struct of_device_id kmeter_ids[] = {
static int __init kmeter_declare_of_platform_devices(void)
{
/* Publish the QE devices */
of_platform_bus_probe(NULL, kmeter_ids, NULL);
of_platform_bus_probe(NULL, kmpbec83xx_ids, NULL);
return 0;
}
machine_device_initcall(kmeter1, kmeter_declare_of_platform_devices);
machine_device_initcall(mpc83xx_km, kmeter_declare_of_platform_devices);
static void __init kmeter1_init_IRQ(void)
static void __init mpc83xx_km_init_IRQ(void)
{
struct device_node *np;
......@@ -168,21 +171,34 @@ static void __init kmeter1_init_IRQ(void)
#endif /* CONFIG_QUICC_ENGINE */
}
/* list of the supported boards */
static char *board[] __initdata = {
"Keymile,KMETER1",
"Keymile,kmpbec8321",
NULL
};
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init kmeter1_probe(void)
static int __init mpc83xx_km_probe(void)
{
unsigned long root = of_get_flat_dt_root();
unsigned long node = of_get_flat_dt_root();
int i = 0;
return of_flat_dt_is_compatible(root, "keymile,KMETER1");
while (board[i]) {
if (of_flat_dt_is_compatible(node, board[i]))
break;
i++;
}
return (board[i] != NULL);
}
define_machine(kmeter1) {
.name = "KMETER1",
.probe = kmeter1_probe,
.setup_arch = kmeter1_setup_arch,
.init_IRQ = kmeter1_init_IRQ,
define_machine(mpc83xx_km) {
.name = "mpc83xx-km-platform",
.probe = mpc83xx_km_probe,
.setup_arch = mpc83xx_km_setup_arch,
.init_IRQ = mpc83xx_km_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7