net: emaclite: Fix coding style

Make coding style changes to fix checkpatch script warnings.
There is no functional change. Fixes below check and warnings-

CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: spinlock_t definition without comment
CHECK: Please don't use multiple blank lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: braces {} should be used on all arms of this statement
CHECK: Unbalanced braces around else statement
CHECK: Alignment should match open parenthesis
WARNING: Missing a blank line after declarations
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/xilinx/xilinx_emaclite.c

 // SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device.
+/* Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device.
  *
  * This is a new flat driver which is based on the original emac_lite
  * driver from John Williams <john.williams@xilinx.com>.
@@ -91,8 +90,6 @@
 #define XEL_ARP_PACKET_SIZE		28	/* Max ARP packet size */
 #define XEL_HEADER_IP_LENGTH_OFFSET	16	/* IP Length Offset */
 
-
-
 #define TX_TIMEOUT		(60 * HZ)	/* Tx timeout is 60 seconds. */
 #define ALIGNMENT		4
 
@@ -124,7 +121,6 @@
  * @last_link:		last link status
  */
 struct net_local {
-
 	struct net_device *ndev;
 
 	bool tx_ping_pong;
@@ -133,7 +129,7 @@ struct net_local {
 	u32 next_rx_buf_to_use;
 	void __iomem *base_addr;
 
-	spinlock_t reset_lock;
+	spinlock_t reset_lock; /* serialize xmit and tx_timeout execution */
 	struct sk_buff *deferred_skb;
 
 	struct phy_device *phy_dev;
@@ -144,7 +140,6 @@ struct net_local {
 	int last_link;
 };
 
-
 /*************************/
 /* EmacLite driver calls */
 /*************************/
@@ -207,7 +202,7 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata)
  * address in the EmacLite device.
  */
 static void xemaclite_aligned_write(const void *src_ptr, u32 *dest_ptr,
-				    unsigned length)
+				    unsigned int length)
 {
 	const u16 *from_u16_ptr;
 	u32 align_buffer;
@@ -265,7 +260,7 @@ static void xemaclite_aligned_write(const void *src_ptr, u32 *dest_ptr,
  * to a 16-bit aligned buffer.
  */
 static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
-				   unsigned length)
+				   unsigned int length)
 {
 	u16 *to_u16_ptr, *from_u16_ptr;
 	u32 *from_u32_ptr;
@@ -330,7 +325,6 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
 	reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET);
 	if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
 	     XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {
-
 		/* Switch to next buffer if configured */
 		if (drvdata->tx_ping_pong != 0)
 			drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET;
@@ -346,8 +340,9 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
 		if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
 		     XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
 			return -1; /* Buffers were full, return failure */
-	} else
+	} else {
 		return -1; /* Buffer was full, return failure */
+	}
 
 	/* Write the frame to the buffer */
 	xemaclite_aligned_write(data, (u32 __force *)addr, byte_count);
@@ -423,7 +418,6 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
 	 * or an IP packet or an ARP packet
 	 */
 	if (proto_type > ETH_DATA_LEN) {
-
 		if (proto_type == ETH_P_IP) {
 			length = ((ntohl(xemaclite_readl(addr +
 					XEL_HEADER_IP_LENGTH_OFFSET +
@@ -433,16 +427,18 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
 			length = min_t(u16, length, ETH_DATA_LEN);
 			length += ETH_HLEN + ETH_FCS_LEN;
 
-		} else if (proto_type == ETH_P_ARP)
+		} else if (proto_type == ETH_P_ARP) {
 			length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN;
-		else
+		} else {
 			/* Field contains type other than IP or ARP, use max
 			 * frame size and let user parse it
 			 */
 			length = ETH_FRAME_LEN + ETH_FCS_LEN;
-	} else
+		}
+	} else {
 		/* Use the length in the frame, plus the header and trailer */
 		length = proto_type + ETH_HLEN + ETH_FCS_LEN;
+	}
 
 	if (WARN_ON(length > maxlen))
 		length = maxlen;
@@ -672,7 +668,6 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
 	tx_status = xemaclite_readl(base_addr + XEL_TSR_OFFSET);
 	if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
 	    (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
-
 		tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
 		xemaclite_writel(tx_status, base_addr + XEL_TSR_OFFSET);
 
@@ -683,7 +678,6 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
 	tx_status = xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
 	if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
 	    (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
-
 		tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
 		xemaclite_writel(tx_status, base_addr + XEL_BUFFER_OFFSET +
 				 XEL_TSR_OFFSET);
@@ -840,6 +834,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 	of_address_to_resource(npp, 0, &res);
 	if (lp->ndev->mem_start != res.start) {
 		struct phy_device *phydev;
+
 		phydev = of_phy_find_device(lp->phy_node);
 		if (!phydev)
 			dev_info(dev,