Commit 9566e91d authored by Andreas Herrmann's avatar Andreas Herrmann Committed by Ingo Molnar

x86: fix detection of CONSTANT_TSC bit for AMD CPUs

Commits
 - c52f61fcbdb2aa84f0e4d831ef07f375e6b99b2c
  (x86: allow TSC clock source on AMD Fam10h and some cleanup)
 - e30436f05d456efaff77611e4494f607b14c2782
  (x86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection)

are supposed to fix the detection of contant TSC for AMD CPUs.
Unfortunately on x86_64 it does still not work with current x86/mm.
For a Phenom I still get:

  ...
  TSC calibrated against PM_TIMER
  Marking TSC unstable due to TSCs unsynchronized
  time.c: Detected 2288.366 MHz processor.
  ...

We have to set c->x86_power in early_identify_cpu to properly detect
the CONSTANT_TSC bit in early_init_amd.

Attached patch fixes this issue. Following the relevant boot
messages when the fix is used:

  ...
  TSC calibrated against PM_TIMER
  time.c: Detected 2288.279 MHz processor.
  ...
  Initializing CPU#1
  ...
  checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  ...
  Initializing CPU#2
  ...
  checking TSC synchronization [CPU#0 -> CPU#2]: passed.
  ...
  Booting processor 3/4 APIC 0x3
  ...
  checking TSC synchronization [CPU#0 -> CPU#3]: passed.
  Brought up 4 CPUs
  ...

Patch is against x86/mm (v2.6.24-rc8-672-ga9f7faa).
Please apply.

Set c->x86_power in early_identify_cpu. This ensures that
X86_FEATURE_CONSTANT_TSC can properly be set in early_init_amd.
Signed-off-by: default avatarAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent ddb25f9a
......@@ -996,6 +996,10 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
c->x86_capability[2] = cpuid_edx(0x80860001);
}
c->extended_cpuid_level = cpuid_eax(0x80000000);
if (c->extended_cpuid_level >= 0x80000007)
c->x86_power = cpuid_edx(0x80000007);
switch (c->x86_vendor) {
case X86_VENDOR_AMD:
early_init_amd(c);
......@@ -1066,11 +1070,6 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
numa_add_cpu(smp_processor_id());
#endif
c->extended_cpuid_level = cpuid_eax(0x80000000);
if (c->extended_cpuid_level >= 0x80000007)
c->x86_power = cpuid_edx(0x80000007);
switch (c->x86_vendor) {
case X86_VENDOR_AMD:
early_init_amd(c);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment