staging: fbtft: Use standard MIPI DCS command defines for hx8357d

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/fbtft/fb_hx8357d.c

@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 #include "fb_hx8357d.h"
@@ -35,7 +36,7 @@ static int init_display(struct fbtft_par *par)
 	par->fbtftops.reset(par);
 
 	/* Reset things like Gamma */
-	write_reg(par, HX8357B_SWRESET);
+	write_reg(par, MIPI_DCS_SOFT_RESET);
 	usleep_range(5000, 7000);
 
 	/* setextc */
@@ -116,22 +117,22 @@ static int init_display(struct fbtft_par *par)
 		0x01);
 
 	/* 16 bit */
-	write_reg(par, HX8357_COLMOD, 0x55);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
 
-	write_reg(par, HX8357_MADCTL, 0xC0);
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0xC0);
 
 	/* TE off */
-	write_reg(par, HX8357_TEON, 0x00);
+	write_reg(par, MIPI_DCS_SET_TEAR_ON, 0x00);
 
 	/* tear line */
-	write_reg(par, HX8357_TEARLINE, 0x00, 0x02);
+	write_reg(par, MIPI_DCS_SET_TEAR_SCANLINE, 0x00, 0x02);
 
 	/* Exit Sleep */
-	write_reg(par, HX8357_SLPOUT);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 	msleep(150);
 
 	/* display on */
-	write_reg(par, HX8357_DISPON);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	usleep_range(5000, 7000);
 
 	return 0;
@@ -139,18 +140,15 @@ static int init_display(struct fbtft_par *par)
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column addr set */
-	write_reg(par, HX8357_CASET,
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
 		  xs >> 8, xs & 0xff,  /* XSTART */
 		  xe >> 8, xe & 0xff); /* XEND */
 
-	/* Row addr set */
-	write_reg(par, HX8357_PASET,
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
 		  ys >> 8, ys & 0xff,  /* YSTART */
 		  ye >> 8, ye & 0xff); /* YEND */
 
-	/* write to RAM */
-	write_reg(par, HX8357_RAMWR);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define HX8357D_MADCTL_MY  0x80
@@ -182,7 +180,7 @@ static int set_var(struct fbtft_par *par)
 	val |= (par->bgr ? HX8357D_MADCTL_RGB : HX8357D_MADCTL_BGR);
 
 	/* Memory Access Control */
-	write_reg(par, HX8357_MADCTL, val);
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val);
 
 	return 0;
 }