Skip to content

L
linux
Commit 967dd82f authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller
2 Browse files
Options

net: dsa: b53: Add support for Broadcom RoboSwitch 

This patch adds support for Broadcom's BCM53xx switch family, also known
as RoboSwitch. Some of these switches are ubiquituous, found in home
routers, Wi-Fi routers, DSL and cable modem gateways and other
networking related products.

This drivers adds the library driver (b53_common.c) as well as a few bus
glue drivers for MDIO, SPI, Switch Register Access Block (SRAB) and
memory-mapped I/O into a SoC's address space (Broadcom BCM63xx/33xx).

Basic operations are supported to bring the Layer 1/2 up and running,
but not much more at this point, subsequent patches add the remaining
features.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 409a5f27
Hide whitespace changes
Inline Side-by-side
Showing with 3397 additions and 0 deletions
Documentation/devicetree/bindings/net/dsa/b53.txt 0 → 100644
View file @ 967dd82f
Broadcom BCM53xx Ethernet switches
==================================
Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of: "brcm,bcm5325"
"brcm,bcm53115"
"brcm,bcm53125"
"brcm,bcm53128"
"brcm,bcm5365"
"brcm,bcm5395"
"brcm,bcm5397"
"brcm,bcm5398"
For the BCM5310x SoCs with an integrated switch, must be one of:
"brcm,bcm53010-srab"
"brcm,bcm53011-srab"
"brcm,bcm53012-srab"
"brcm,bcm53018-srab"
"brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
"brcm,bcm3384-switch"
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
eth0: ethernet@10001000 {
compatible = "brcm,unimac";
reg = <0x10001000 0x1000>;
fixed-link {
speed = <1000>;
duplex-full;
};
};
mdio0: mdio@10000000 {
compatible = "brcm,unimac-mdio";
#address-cells = <1>;
#size-cells = <0>;
switch0: ethernet-switch@30 {
compatible = "brcm,bcm53125";
#address-cells = <1>;
#size-cells = <0>;
ports {
port0@0 {
reg = <0>;
label = "lan1";
};
port1@1 {
reg = <1>;
label = "lan2";
};
port5@5 {
reg = <5>;
label = "cable-modem";
fixed-link {
speed = <1000>;
duplex-full;
};
phy-mode = "rgmii-txid";
};
port8@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
duplex-full;
};
phy-mode = "rgmii-txid";
ethernet = <&eth0>;
};
};
};
};
MAINTAINERS
View file @ 967dd82f
......@@ -2454,6 +2454,14 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/b44.*
BROADCOM B53 ETHERNET SWITCH DRIVER
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
L: openwrt-devel@lists.openwrt.org (subscribers-only)
S: Supported
F: drivers/net/dsa/b53/*
F: include/linux/platform_data/b53.h
BROADCOM GENET ETHERNET DRIVER
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
......
drivers/net/dsa/Kconfig
View file @ 967dd82f
......@@ -28,4 +28,6 @@ config NET_DSA_BCM_SF2
This enables support for the Broadcom Starfighter 2 Ethernet
switch chips.
source "drivers/net/dsa/b53/Kconfig"
endmenu
drivers/net/dsa/Makefile
View file @ 967dd82f
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
obj-y += b53/
drivers/net/dsa/b53/Kconfig 0 → 100644
View file @ 967dd82f
menuconfig B53
tristate "Broadcom BCM53xx managed switch support"
depends on NET_DSA
help
This driver adds support for Broadcom managed switch chips. It supports
BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX
integrated switches.
config B53_SPI_DRIVER
tristate "B53 SPI connected switch driver"
depends on B53 && SPI
help
Select to enable support for registering switches configured through SPI.
config B53_MDIO_DRIVER
tristate "B53 MDIO connected switch driver"
depends on B53
help
Select to enable support for registering switches configured through MDIO.
config B53_MMAP_DRIVER
tristate "B53 MMAP connected switch driver"
depends on B53 && HAS_IOMEM
help
Select to enable support for memory-mapped switches like the BCM63XX
integrated switches.
config B53_SRAB_DRIVER
tristate "B53 SRAB connected switch driver"
depends on B53 && HAS_IOMEM
help
Select to enable support for memory-mapped Switch Register Access
Bridge Registers (SRAB) like it is found on the BCM53010
drivers/net/dsa/b53/Makefile 0 → 100644
View file @ 967dd82f
obj-$(CONFIG_B53) += b53_common.o
obj-$(CONFIG_B53_SPI_DRIVER) += b53_spi.o
obj-$(CONFIG_B53_MDIO_DRIVER) += b53_mdio.o
obj-$(CONFIG_B53_MMAP_DRIVER) += b53_mmap.o
obj-$(CONFIG_B53_SRAB_DRIVER) += b53_srab.o
drivers/net/dsa/b53/b53_common.c 0 → 100644
View file @ 967dd82f
/*
* B53 switch driver main logic
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
* Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_data/b53.h>
#include <linux/phy.h>
#include <net/dsa.h>
#include "b53_regs.h"
#include "b53_priv.h"
struct b53_mib_desc {
u8 size;
u8 offset;
const char *name;
};
/* BCM5365 MIB counters */
static const struct b53_mib_desc b53_mibs_65[] = {
{ 8, 0x00, "TxOctets" },
{ 4, 0x08, "TxDropPkts" },
{ 4, 0x10, "TxBroadcastPkts" },
{ 4, 0x14, "TxMulticastPkts" },
{ 4, 0x18, "TxUnicastPkts" },
{ 4, 0x1c, "TxCollisions" },
{ 4, 0x20, "TxSingleCollision" },
{ 4, 0x24, "TxMultipleCollision" },
{ 4, 0x28, "TxDeferredTransmit" },
{ 4, 0x2c, "TxLateCollision" },
{ 4, 0x30, "TxExcessiveCollision" },
{ 4, 0x38, "TxPausePkts" },
{ 8, 0x44, "RxOctets" },
{ 4, 0x4c, "RxUndersizePkts" },
{ 4, 0x50, "RxPausePkts" },
{ 4, 0x54, "Pkts64Octets" },
{ 4, 0x58, "Pkts65to127Octets" },
{ 4, 0x5c, "Pkts128to255Octets" },
{ 4, 0x60, "Pkts256to511Octets" },
{ 4, 0x64, "Pkts512to1023Octets" },
{ 4, 0x68, "Pkts1024to1522Octets" },
{ 4, 0x6c, "RxOversizePkts" },
{ 4, 0x70, "RxJabbers" },
{ 4, 0x74, "RxAlignmentErrors" },
{ 4, 0x78, "RxFCSErrors" },
{ 8, 0x7c, "RxGoodOctets" },
{ 4, 0x84, "RxDropPkts" },
{ 4, 0x88, "RxUnicastPkts" },
{ 4, 0x8c, "RxMulticastPkts" },
{ 4, 0x90, "RxBroadcastPkts" },
{ 4, 0x94, "RxSAChanges" },
{ 4, 0x98, "RxFragments" },
};
#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65)
/* BCM63xx MIB counters */
static const struct b53_mib_desc b53_mibs_63xx[] = {
{ 8, 0x00, "TxOctets" },
{ 4, 0x08, "TxDropPkts" },
{ 4, 0x0c, "TxQoSPkts" },
{ 4, 0x10, "TxBroadcastPkts" },
{ 4, 0x14, "TxMulticastPkts" },
{ 4, 0x18, "TxUnicastPkts" },
{ 4, 0x1c, "TxCollisions" },
{ 4, 0x20, "TxSingleCollision" },
{ 4, 0x24, "TxMultipleCollision" },
{ 4, 0x28, "TxDeferredTransmit" },
{ 4, 0x2c, "TxLateCollision" },
{ 4, 0x30, "TxExcessiveCollision" },
{ 4, 0x38, "TxPausePkts" },
{ 8, 0x3c, "TxQoSOctets" },
{ 8, 0x44, "RxOctets" },
{ 4, 0x4c, "RxUndersizePkts" },
{ 4, 0x50, "RxPausePkts" },
{ 4, 0x54, "Pkts64Octets" },
{ 4, 0x58, "Pkts65to127Octets" },
{ 4, 0x5c, "Pkts128to255Octets" },
{ 4, 0x60, "Pkts256to511Octets" },
{ 4, 0x64, "Pkts512to1023Octets" },
{ 4, 0x68, "Pkts1024to1522Octets" },
{ 4, 0x6c, "RxOversizePkts" },
{ 4, 0x70, "RxJabbers" },
{ 4, 0x74, "RxAlignmentErrors" },
{ 4, 0x78, "RxFCSErrors" },
{ 8, 0x7c, "RxGoodOctets" },
{ 4, 0x84, "RxDropPkts" },
{ 4, 0x88, "RxUnicastPkts" },
{ 4, 0x8c, "RxMulticastPkts" },
{ 4, 0x90, "RxBroadcastPkts" },
{ 4, 0x94, "RxSAChanges" },
{ 4, 0x98, "RxFragments" },
{ 4, 0xa0, "RxSymbolErrors" },
{ 4, 0xa4, "RxQoSPkts" },
{ 8, 0xa8, "RxQoSOctets" },
{ 4, 0xb0, "Pkts1523to2047Octets" },
{ 4, 0xb4, "Pkts2048to4095Octets" },
{ 4, 0xb8, "Pkts4096to8191Octets" },
{ 4, 0xbc, "Pkts8192to9728Octets" },
{ 4, 0xc0, "RxDiscarded" },
};
#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx)
/* MIB counters */
static const struct b53_mib_desc b53_mibs[] = {
{ 8, 0x00, "TxOctets" },
{ 4, 0x08, "TxDropPkts" },
{ 4, 0x10, "TxBroadcastPkts" },
{ 4, 0x14, "TxMulticastPkts" },
{ 4, 0x18, "TxUnicastPkts" },
{ 4, 0x1c, "TxCollisions" },
{ 4, 0x20, "TxSingleCollision" },
{ 4, 0x24, "TxMultipleCollision" },
{ 4, 0x28, "TxDeferredTransmit" },
{ 4, 0x2c, "TxLateCollision" },
{ 4, 0x30, "TxExcessiveCollision" },
{ 4, 0x38, "TxPausePkts" },
{ 8, 0x50, "RxOctets" },
{ 4, 0x58, "RxUndersizePkts" },
{ 4, 0x5c, "RxPausePkts" },
{ 4, 0x60, "Pkts64Octets" },
{ 4, 0x64, "Pkts65to127Octets" },
{ 4, 0x68, "Pkts128to255Octets" },
{ 4, 0x6c, "Pkts256to511Octets" },
{ 4, 0x70, "Pkts512to1023Octets" },
{ 4, 0x74, "Pkts1024to1522Octets" },
{ 4, 0x78, "RxOversizePkts" },
{ 4, 0x7c, "RxJabbers" },
{ 4, 0x80, "RxAlignmentErrors" },
{ 4, 0x84, "RxFCSErrors" },
{ 8, 0x88, "RxGoodOctets" },
{ 4, 0x90, "RxDropPkts" },
{ 4, 0x94, "RxUnicastPkts" },
{ 4, 0x98, "RxMulticastPkts" },
{ 4, 0x9c, "RxBroadcastPkts" },
{ 4, 0xa0, "RxSAChanges" },
{ 4, 0xa4, "RxFragments" },
{ 4, 0xa8, "RxJumboPkts" },
{ 4, 0xac, "RxSymbolErrors" },
{ 4, 0xc0, "RxDiscarded" },
};
#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs)
static int b53_do_vlan_op(struct b53_device *dev, u8 op)
{
unsigned int i;
b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
for (i = 0; i < 10; i++) {
u8 vta;
b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
if (!(vta & VTA_START_CMD))
return 0;
usleep_range(100, 200);
}
return -EIO;
}
static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, u16 members,
u16 untag)
{
if (is5325(dev)) {
u32 entry = 0;
if (members) {
entry = ((untag & VA_UNTAG_MASK_25) << VA_UNTAG_S_25) |
members;
if (dev->core_rev >= 3)
entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
else
entry |= VA_VALID_25;
}
b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
VTA_RW_STATE_WR | VTA_RW_OP_EN);
} else if (is5365(dev)) {
u16 entry = 0;
if (members)
entry = ((untag & VA_UNTAG_MASK_65) << VA_UNTAG_S_65) |
members | VA_VALID_65;
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
VTA_RW_STATE_WR | VTA_RW_OP_EN);
} else {
b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
(untag << VTE_UNTAG_S) | members);
b53_do_vlan_op(dev, VTA_CMD_WRITE);
}
}
void b53_set_forwarding(struct b53_device *dev, int enable)
{
u8 mgmt;
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
if (enable)
mgmt |= SM_SW_FWD_EN;
else
mgmt &= ~SM_SW_FWD_EN;
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
}
static void b53_enable_vlan(struct b53_device *dev, int enable)
{
u8 mgmt, vc0, vc1, vc4 = 0, vc5;
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
if (is5325(dev) || is5365(dev)) {
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
} else if (is63xx(dev)) {
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
} else {
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
}
mgmt &= ~SM_SW_FWD_MODE;
if (enable) {
vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
vc4 &= ~VC4_ING_VID_CHECK_MASK;
vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
vc5 |= VC5_DROP_VTABLE_MISS;
if (is5325(dev))
vc0 &= ~VC0_RESERVED_1;
if (is5325(dev) || is5365(dev))
vc1 |= VC1_RX_MCST_TAG_EN;
if (!is5325(dev) && !is5365(dev)) {
if (dev->allow_vid_4095)
vc5 |= VC5_VID_FFF_EN;
else
vc5 &= ~VC5_VID_FFF_EN;
}
} else {
vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
vc4 &= ~VC4_ING_VID_CHECK_MASK;
vc5 &= ~VC5_DROP_VTABLE_MISS;
if (is5325(dev) || is5365(dev))
vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
else
vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
if (is5325(dev) || is5365(dev))
vc1 &= ~VC1_RX_MCST_TAG_EN;
if (!is5325(dev) && !is5365(dev))
vc5 &= ~VC5_VID_FFF_EN;
}
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
if (is5325(dev) || is5365(dev)) {
/* enable the high 8 bit vid check on 5325 */
if (is5325(dev) && enable)
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
VC3_HIGH_8BIT_EN);
else
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
} else if (is63xx(dev)) {
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
} else {
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
}
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
}
static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
{
u32 port_mask = 0;
u16 max_size = JMS_MIN_SIZE;
if (is5325(dev) || is5365(dev))
return -EINVAL;
if (enable) {
port_mask = dev->enabled_ports;
max_size = JMS_MAX_SIZE;
if (allow_10_100)
port_mask |= JPM_10_100_JUMBO_EN;
}
b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
}
static int b53_flush_arl(struct b53_device *dev)
{
unsigned int i;
b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
FAST_AGE_DONE | FAST_AGE_DYNAMIC | FAST_AGE_STATIC);
for (i = 0; i < 10; i++) {
u8 fast_age_ctrl;
b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
&fast_age_ctrl);
if (!(fast_age_ctrl & FAST_AGE_DONE))
goto out;
msleep(1);
}
return -ETIMEDOUT;
out:
/* Only age dynamic entries (default behavior) */
b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
return 0;
}
static int b53_enable_port(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct b53_device *dev = ds_to_priv(ds);
/* Clear the Rx and Tx disable bits and set to no spanning tree */
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
return 0;
}
static void b53_disable_port(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct b53_device *dev = ds_to_priv(ds);
u8 reg;
/* Disable Tx/Rx for the port */
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
}
static void b53_enable_cpu_port(struct b53_device *dev)
{
unsigned int cpu_port = dev->cpu_port;
u8 port_ctrl;
/* BCM5325 CPU port is at 8 */
if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25)
cpu_port = B53_CPU_PORT;
port_ctrl = PORT_CTRL_RX_BCST_EN |
PORT_CTRL_RX_MCST_EN |
PORT_CTRL_RX_UCST_EN;
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl);
}
static void b53_enable_mib(struct b53_device *dev)
{
u8 gc;
b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
}
static int b53_configure_vlan(struct b53_device *dev)
{
int i;
/* clear all vlan entries */
if (is5325(dev) || is5365(dev)) {
for (i = 1; i < dev->num_vlans; i++)
b53_set_vlan_entry(dev, i, 0, 0);
} else {
b53_do_vlan_op(dev, VTA_CMD_CLEAR);
}
b53_enable_vlan(dev, false);
b53_for_each_port(dev, i)
b53_write16(dev, B53_VLAN_PAGE,
B53_VLAN_PORT_DEF_TAG(i), 1);
if (!is5325(dev) && !is5365(dev))
b53_set_jumbo(dev, dev->enable_jumbo, false);
return 0;
}
static void b53_switch_reset_gpio(struct b53_device *dev)
{
int gpio = dev->reset_gpio;
if (gpio < 0)
return;
/* Reset sequence: RESET low(50ms)->high(20ms)
*/
gpio_set_value(gpio, 0);
mdelay(50);
gpio_set_value(gpio, 1);
mdelay(20);
dev->current_page = 0xff;
}
static int b53_switch_reset(struct b53_device *dev)
{
u8 mgmt;
b53_switch_reset_gpio(dev);
if (is539x(dev)) {
b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
}
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
if (!(mgmt & SM_SW_FWD_EN)) {
mgmt &= ~SM_SW_FWD_MODE;
mgmt |= SM_SW_FWD_EN;
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
if (!(mgmt & SM_SW_FWD_EN)) {
dev_err(dev->dev, "Failed to enable switch!\n");
return -EINVAL;
}
}
b53_enable_mib(dev);
return b53_flush_arl(dev);
}
static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
{
struct b53_device *priv = ds_to_priv(ds);
u16 value = 0;
int ret;
if (priv->ops->phy_read16)
ret = priv->ops->phy_read16(priv, addr, reg, &value);
else
ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
reg * 2, &value);
return ret ? ret : value;
}
static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
{
struct b53_device *priv = ds_to_priv(ds);
if (priv->ops->phy_write16)
return priv->ops->phy_write16(priv, addr, reg, val);
return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
}
static int b53_reset_switch(struct b53_device *priv)
{
/* reset vlans */
priv->enable_jumbo = false;
memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
return b53_switch_reset(priv);
}
static int b53_apply_config(struct b53_device *priv)
{
/* disable switching */
b53_set_forwarding(priv, 0);
b53_configure_vlan(priv);
/* enable switching */
b53_set_forwarding(priv, 1);
return 0;
}
static void b53_reset_mib(struct b53_device *priv)
{
u8 gc;
b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
msleep(1);
b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
msleep(1);
}
static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
{
if (is5365(dev))
return b53_mibs_65;
else if (is63xx(dev))
return b53_mibs_63xx;
else
return b53_mibs;
}
static unsigned int b53_get_mib_size(struct b53_device *dev)
{
if (is5365(dev))
return B53_MIBS_65_SIZE;
else if (is63xx(dev))
return B53_MIBS_63XX_SIZE;
else
return B53_MIBS_SIZE;
}
static void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
{
struct b53_device *dev = ds_to_priv(ds);
const struct b53_mib_desc *mibs = b53_get_mib(dev);
unsigned int mib_size = b53_get_mib_size(dev);
unsigned int i;
for (i = 0; i < mib_size; i++)
memcpy(data + i * ETH_GSTRING_LEN,
mibs[i].name, ETH_GSTRING_LEN);
}
static void b53_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *data)
{
struct b53_device *dev = ds_to_priv(ds);
const struct b53_mib_desc *mibs = b53_get_mib(dev);
unsigned int mib_size = b53_get_mib_size(dev);
const struct b53_mib_desc *s;
unsigned int i;
u64 val = 0;
if (is5365(dev) && port == 5)
port = 8;
mutex_lock(&dev->stats_mutex);
for (i = 0; i < mib_size; i++) {
s = &mibs[i];
if (mibs->size == 8) {
b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
} else {
u32 val32;
b53_read32(dev, B53_MIB_PAGE(port), s->offset,
&val32);
val = val32;
}
data[i] = (u64)val;
}
mutex_unlock(&dev->stats_mutex);
}
static int b53_get_sset_count(struct dsa_switch *ds)
{
struct b53_device *dev = ds_to_priv(ds);
return b53_get_mib_size(dev);
}
static int b53_set_addr(struct dsa_switch *ds, u8 *addr)
{
return 0;
}
static int b53_setup(struct dsa_switch *ds)
{
struct b53_device *dev = ds_to_priv(ds);
unsigned int port;
int ret;
ret = b53_reset_switch(dev);
if (ret) {
dev_err(ds->dev, "failed to reset switch\n");
return ret;
}
b53_reset_mib(dev);
ret = b53_apply_config(dev);
if (ret)
dev_err(ds->dev, "failed to apply configuration\n");
for (port = 0; port < dev->num_ports; port++) {
if (BIT(port) & ds->enabled_port_mask)
b53_enable_port(ds, port, NULL);
else if (dsa_is_cpu_port(ds, port))
b53_enable_cpu_port(dev);
else
b53_disable_port(ds, port, NULL);
}
return ret;
}
static void b53_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct b53_device *dev = ds_to_priv(ds);
u8 rgmii_ctrl = 0, reg = 0, off;
if (!phy_is_pseudo_fixed_link(phydev))
return;
/* Override the port settings */
if (port == dev->cpu_port) {
off = B53_PORT_OVERRIDE_CTRL;
reg = PORT_OVERRIDE_EN;
} else {
off = B53_GMII_PORT_OVERRIDE_CTRL(port);
reg = GMII_PO_EN;
}
/* Set the link UP */
if (phydev->link)
reg |= PORT_OVERRIDE_LINK;
if (phydev->duplex == DUPLEX_FULL)
reg |= PORT_OVERRIDE_FULL_DUPLEX;
switch (phydev->speed) {
case 2000:
reg |= PORT_OVERRIDE_SPEED_2000M;
/* fallthrough */
case SPEED_1000:
reg |= PORT_OVERRIDE_SPEED_1000M;
break;
case SPEED_100:
reg |= PORT_OVERRIDE_SPEED_100M;
break;
case SPEED_10:
reg |= PORT_OVERRIDE_SPEED_10M;
break;
default:
dev_err(ds->dev, "unknown speed: %d\n", phydev->speed);
return;
}
/* Enable flow control on BCM5301x's CPU port */
if (is5301x(dev) && port == dev->cpu_port)
reg |= PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW;
if (phydev->pause) {
if (phydev->asym_pause)
reg |= PORT_OVERRIDE_TX_FLOW;
reg |= PORT_OVERRIDE_RX_FLOW;
}
b53_write8(dev, B53_CTRL_PAGE, off, reg);
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
if (port == 8)
off = B53_RGMII_CTRL_IMP;
else
off = B53_RGMII_CTRL_P(port);
/* Configure the port RGMII clock delay by DLL disabled and
* tx_clk aligned timing (restoring to reset defaults)
*/
b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
RGMII_CTRL_TIMING_SEL);
/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
* sure that we enable the port TX clock internal delay to
* account for this internal delay that is inserted, otherwise
* the switch won't be able to receive correctly.
*
* PHY_INTERFACE_MODE_RGMII means that we are not introducing
* any delay neither on transmission nor reception, so the
* BCM53125 must also be configured accordingly to account for
* the lack of delay and introduce
*
* The BCM53125 switch has its RX clock and TX clock control
* swapped, hence the reason why we modify the TX clock path in
* the "RGMII" case
*/
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
dev_info(ds->dev, "Configured port %d for %s\n", port,
phy_modes(phydev->interface));
}
/* configure MII port if necessary */
if (is5325(dev)) {
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
&reg);
/* reverse mii needs to be enabled */
if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
reg | PORT_OVERRIDE_RV_MII_25);
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
&reg);
if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
dev_err(ds->dev,
"Failed to enable reverse MII mode\n");
return;
}
}
} else if (is5301x(dev)) {
if (port != dev->cpu_port) {
u8 po_reg = B53_GMII_PORT_OVERRIDE_CTRL(dev->cpu_port);
u8 gmii_po;
b53_read8(dev, B53_CTRL_PAGE, po_reg, &gmii_po);
gmii_po |= GMII_PO_LINK |
GMII_PO_RX_FLOW |
GMII_PO_TX_FLOW |
GMII_PO_EN |
GMII_PO_SPEED_2000M;
b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po);
}
}
}
static struct dsa_switch_driver b53_switch_ops = {
.tag_protocol = DSA_TAG_PROTO_NONE,
.setup = b53_setup,
.set_addr = b53_set_addr,
.get_strings = b53_get_strings,
.get_ethtool_stats = b53_get_ethtool_stats,
.get_sset_count = b53_get_sset_count,
.phy_read = b53_phy_read16,
.phy_write = b53_phy_write16,
.adjust_link = b53_adjust_link,
.port_enable = b53_enable_port,
.port_disable = b53_disable_port,
};
struct b53_chip_data {
u32 chip_id;
const char *dev_name;
u16 vlans;
u16 enabled_ports;
u8 cpu_port;
u8 vta_regs[3];
u8 duplex_reg;
u8 jumbo_pm_reg;
u8 jumbo_size_reg;
};
#define B53_VTA_REGS \
{ B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
#define B53_VTA_REGS_9798 \
{ B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
#define B53_VTA_REGS_63XX \
{ B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
static const struct b53_chip_data b53_switch_chips[] = {
{
.chip_id = BCM5325_DEVICE_ID,
.dev_name = "BCM5325",
.vlans = 16,
.enabled_ports = 0x1f,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
{
.chip_id = BCM5365_DEVICE_ID,
.dev_name = "BCM5365",
.vlans = 256,
.enabled_ports = 0x1f,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
{
.chip_id = BCM5395_DEVICE_ID,
.dev_name = "BCM5395",
.vlans = 4096,
.enabled_ports = 0x1f,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM5397_DEVICE_ID,
.dev_name = "BCM5397",
.vlans = 4096,
.enabled_ports = 0x1f,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM5398_DEVICE_ID,
.dev_name = "BCM5398",
.vlans = 4096,
.enabled_ports = 0x7f,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM53115_DEVICE_ID,
.dev_name = "BCM53115",
.vlans = 4096,
.enabled_ports = 0x1f,
.vta_regs = B53_VTA_REGS,
.cpu_port = B53_CPU_PORT,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM53125_DEVICE_ID,
.dev_name = "BCM53125",
.vlans = 4096,
.enabled_ports = 0xff,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM53128_DEVICE_ID,
.dev_name = "BCM53128",
.vlans = 4096,
.enabled_ports = 0x1ff,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM63XX_DEVICE_ID,
.dev_name = "BCM63xx",
.vlans = 4096,
.enabled_ports = 0, /* pdata must provide them */
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_63XX,
.duplex_reg = B53_DUPLEX_STAT_63XX,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
},
{
.chip_id = BCM53010_DEVICE_ID,
.dev_name = "BCM53010",
.vlans = 4096,
.enabled_ports = 0x1f,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM53011_DEVICE_ID,
.dev_name = "BCM53011",
.vlans = 4096,
.enabled_ports = 0x1bf,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM53012_DEVICE_ID,
.dev_name = "BCM53012",
.vlans = 4096,
.enabled_ports = 0x1bf,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM53018_DEVICE_ID,
.dev_name = "BCM53018",
.vlans = 4096,
.enabled_ports = 0x1f,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
{
.chip_id = BCM53019_DEVICE_ID,
.dev_name = "BCM53019",
.vlans = 4096,
.enabled_ports = 0x1f,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
};
static int b53_switch_init(struct b53_device *dev)
{
struct dsa_switch *ds = dev->ds;
unsigned int i;
int ret;
for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
const struct b53_chip_data *chip = &b53_switch_chips[i];
if (chip->chip_id == dev->chip_id) {
if (!dev->enabled_ports)
dev->enabled_ports = chip->enabled_ports;
dev->name = chip->dev_name;
dev->duplex_reg = chip->duplex_reg;
dev->vta_regs[0] = chip->vta_regs[0];
dev->vta_regs[1] = chip->vta_regs[1];
dev->vta_regs[2] = chip->vta_regs[2];
dev->jumbo_pm_reg = chip->jumbo_pm_reg;
ds->drv = &b53_switch_ops;
dev->cpu_port = chip->cpu_port;
dev->num_vlans = chip->vlans;
break;
}
}
/* check which BCM5325x version we have */
if (is5325(dev)) {
u8 vc4;
b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
/* check reserved bits */
switch (vc4 & 3) {
case 1:
/* BCM5325E */
break;
case 3:
/* BCM5325F - do not use port 4 */
dev->enabled_ports &= ~BIT(4);
break;
default:
/* On the BCM47XX SoCs this is the supported internal switch.*/
#ifndef CONFIG_BCM47XX
/* BCM5325M */
return -EINVAL;
#else
break;
#endif
}
} else if (dev->chip_id == BCM53115_DEVICE_ID) {
u64 strap_value;
b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
/* use second IMP port if GMII is enabled */
if (strap_value & SV_GMII_CTRL_115)
dev->cpu_port = 5;
}
/* cpu port is always last */
dev->num_ports = dev->cpu_port + 1;
dev->enabled_ports |= BIT(dev->cpu_port);
dev->ports = devm_kzalloc(dev->dev,
sizeof(struct b53_port) * dev->num_ports,
GFP_KERNEL);
if (!dev->ports)
return -ENOMEM;
dev->reset_gpio = b53_switch_get_reset_gpio(dev);
if (dev->reset_gpio >= 0) {
ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
GPIOF_OUT_INIT_HIGH, "robo_reset");
if (ret)
return ret;
}
return 0;
}
struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
void *priv)
{
struct dsa_switch *ds;
struct b53_device *dev;
ds = devm_kzalloc(base, sizeof(*ds) + sizeof(*dev), GFP_KERNEL);
if (!ds)
return NULL;
dev = (struct b53_device *)(ds + 1);
ds->priv = dev;
ds->dev = base;
dev->dev = base;
dev->ds = ds;
dev->priv = priv;
dev->ops = ops;
mutex_init(&dev->reg_mutex);
mutex_init(&dev->stats_mutex);
return dev;
}
EXPORT_SYMBOL(b53_switch_alloc);
int b53_switch_detect(struct b53_device *dev)
{
u32 id32;
u16 tmp;
u8 id8;
int ret;
ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
if (ret)
return ret;
switch (id8) {
case 0:
/* BCM5325 and BCM5365 do not have this register so reads
* return 0. But the read operation did succeed, so assume this
* is one of them.
*
* Next check if we can write to the 5325's VTA register; for
* 5365 it is read only.
*/
b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
if (tmp == 0xf)
dev->chip_id = BCM5325_DEVICE_ID;
else
dev->chip_id = BCM5365_DEVICE_ID;
break;
case BCM5395_DEVICE_ID:
case BCM5397_DEVICE_ID:
case BCM5398_DEVICE_ID:
dev->chip_id = id8;
break;
default:
ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
if (ret)
return ret;
switch (id32) {
case BCM53115_DEVICE_ID:
case BCM53125_DEVICE_ID:
case BCM53128_DEVICE_ID:
case BCM53010_DEVICE_ID:
case BCM53011_DEVICE_ID:
case BCM53012_DEVICE_ID:
case BCM53018_DEVICE_ID:
case BCM53019_DEVICE_ID:
dev->chip_id = id32;
break;
default:
pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
id8, id32);
return -ENODEV;
}
}
if (dev->chip_id == BCM5325_DEVICE_ID)
return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
&dev->core_rev);
else
return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
&dev->core_rev);
}
EXPORT_SYMBOL(b53_switch_detect);
int b53_switch_register(struct b53_device *dev)
{
int ret;
if (dev->pdata) {
dev->chip_id = dev->pdata->chip_id;
dev->enabled_ports = dev->pdata->enabled_ports;
}
if (!dev->chip_id && b53_switch_detect(dev))
return -EINVAL;
ret = b53_switch_init(dev);
if (ret)
return ret;
pr_info("found switch: %s, rev %i\n", dev->name, dev->core_rev);
return dsa_register_switch(dev->ds, dev->ds->dev->of_node);
}
EXPORT_SYMBOL(b53_switch_register);
MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
MODULE_DESCRIPTION("B53 switch library");
MODULE_LICENSE("Dual BSD/GPL");
drivers/net/dsa/b53/b53_mdio.c 0 → 100644
View file @ 967dd82f
/*
* B53 register access through MII registers
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/phy.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/brcmphy.h>
#include <linux/rtnetlink.h>
#include <net/dsa.h>
#include "b53_priv.h"
/* MII registers */
#define REG_MII_PAGE 0x10 /* MII Page register */
#define REG_MII_ADDR 0x11 /* MII Address register */
#define REG_MII_DATA0 0x18 /* MII Data register 0 */
#define REG_MII_DATA1 0x19 /* MII Data register 1 */
#define REG_MII_DATA2 0x1a /* MII Data register 2 */
#define REG_MII_DATA3 0x1b /* MII Data register 3 */
#define REG_MII_PAGE_ENABLE BIT(0)
#define REG_MII_ADDR_WRITE BIT(0)
#define REG_MII_ADDR_READ BIT(1)
static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
{
int i;
u16 v;
int ret;
struct mii_bus *bus = dev->priv;
if (dev->current_page != page) {
/* set page number */
v = (page << 8) | REG_MII_PAGE_ENABLE;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_PAGE, v);
if (ret)
return ret;
dev->current_page = page;
}
/* set register address */
v = (reg << 8) | op;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_ADDR, v);
if (ret)
return ret;
/* check if operation completed */
for (i = 0; i < 5; ++i) {
v = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_ADDR);
if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
break;
usleep_range(10, 100);
}
if (WARN_ON(i == 5))
return -EIO;
return 0;
}
static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0) & 0xff;
return 0;
}
static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
return 0;
}
static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
*val = mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR, REG_MII_DATA0);
*val |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA1) << 16;
return 0;
}
static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct mii_bus *bus = dev->priv;
u64 temp = 0;
int i;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
for (i = 2; i >= 0; i--) {
temp <<= 16;
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i);
}
*val = temp;
return 0;
}
static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct mii_bus *bus = dev->priv;
u64 temp = 0;
int i;
int ret;
ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
if (ret)
return ret;
for (i = 3; i >= 0; i--) {
temp <<= 16;
temp |= mdiobus_read_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i);
}
*val = temp;
return 0;
}
static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0, value);
if (ret)
return ret;
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
struct mii_bus *bus = dev->priv;
int ret;
ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0, value);
if (ret)
return ret;
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u32 temp = value;
for (i = 0; i < 2; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u64 temp = value;
for (i = 0; i < 3; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct mii_bus *bus = dev->priv;
unsigned int i;
u64 temp = value;
for (i = 0; i < 4; i++) {
int ret = mdiobus_write_nested(bus, BRCM_PSEUDO_PHY_ADDR,
REG_MII_DATA0 + i,
temp & 0xffff);
if (ret)
return ret;
temp >>= 16;
}
return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
}
static int b53_mdio_phy_read16(struct b53_device *dev, int addr, int reg,
u16 *value)
{
struct mii_bus *bus = dev->priv;
*value = mdiobus_read_nested(bus, addr, reg);
return 0;
}
static int b53_mdio_phy_write16(struct b53_device *dev, int addr, int reg,
u16 value)
{
struct mii_bus *bus = dev->bus;
return mdiobus_write_nested(bus, addr, reg, value);
}
static struct b53_io_ops b53_mdio_ops = {
.read8 = b53_mdio_read8,
.read16 = b53_mdio_read16,
.read32 = b53_mdio_read32,
.read48 = b53_mdio_read48,
.read64 = b53_mdio_read64,
.write8 = b53_mdio_write8,
.write16 = b53_mdio_write16,
.write32 = b53_mdio_write32,
.write48 = b53_mdio_write48,
.write64 = b53_mdio_write64,
.phy_read16 = b53_mdio_phy_read16,
.phy_write16 = b53_mdio_phy_write16,
};
#define B53_BRCM_OUI_1 0x0143bc00
#define B53_BRCM_OUI_2 0x03625c00
#define B53_BRCM_OUI_3 0x00406000
static int b53_mdio_probe(struct mdio_device *mdiodev)
{
struct b53_device *dev;
u32 phy_id;
int ret;
/* allow the generic PHY driver to take over the non-management MDIO
* addresses
*/
if (mdiodev->addr != BRCM_PSEUDO_PHY_ADDR && mdiodev->addr != 0) {
dev_err(&mdiodev->dev, "leaving address %d to PHY\n",
mdiodev->addr);
return -ENODEV;
}
/* read the first port's id */
phy_id = mdiobus_read(mdiodev->bus, 0, 2) << 16;
phy_id |= mdiobus_read(mdiodev->bus, 0, 3);
/* BCM5325, BCM539x (OUI_1)
* BCM53125, BCM53128 (OUI_2)
* BCM5365 (OUI_3)
*/
if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
(phy_id & 0xfffffc00) != B53_BRCM_OUI_3) {
dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
return -ENODEV;
}
dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus);
if (!dev)
return -ENOMEM;
/* we don't use page 0xff, so force a page set */
dev->current_page = 0xff;
dev->bus = mdiodev->bus;
dev_set_drvdata(&mdiodev->dev, dev);
ret = b53_switch_register(dev);
if (ret) {
dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret);
return ret;
}
return ret;
}
static void b53_mdio_remove(struct mdio_device *mdiodev)
{
struct b53_device *dev = dev_get_drvdata(&mdiodev->dev);
struct dsa_switch *ds = dev->ds;
dsa_unregister_switch(ds);
}
static const struct of_device_id b53_of_match[] = {
{ .compatible = "brcm,bcm5325" },
{ .compatible = "brcm,bcm53115" },
{ .compatible = "brcm,bcm53125" },
{ .compatible = "brcm,bcm53128" },
{ .compatible = "brcm,bcm5365" },
{ .compatible = "brcm,bcm5395" },
{ .compatible = "brcm,bcm5397" },
{ .compatible = "brcm,bcm5398" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, b53_of_match);
static struct mdio_driver b53_mdio_driver = {
.probe = b53_mdio_probe,
.remove = b53_mdio_remove,
.mdiodrv.driver = {
.name = "bcm53xx",
.of_match_table = b53_of_match,
},
};
static int __init b53_mdio_driver_register(void)
{
return mdio_driver_register(&b53_mdio_driver);
}
module_init(b53_mdio_driver_register);
static void __exit b53_mdio_driver_unregister(void)
{
mdio_driver_unregister(&b53_mdio_driver);
}
module_exit(b53_mdio_driver_unregister);
MODULE_DESCRIPTION("B53 MDIO access driver");
MODULE_LICENSE("Dual BSD/GPL");
drivers/net/dsa/b53/b53_mmap.c 0 → 100644
View file @ 967dd82f
/*
* B53 register access through memory mapped registers
*
* Copyright (C) 2012-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/kconfig.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/platform_data/b53.h>
#include "b53_priv.h"
struct b53_mmap_priv {
void __iomem *regs;
};
static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
u8 __iomem *regs = dev->priv;
*val = readb(regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 2))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
*val = __raw_readw(regs + (page << 8) + reg);
else
*val = readw(regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 4))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
*val = __raw_readl(regs + (page << 8) + reg);
else
*val = readl(regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
if (WARN_ON(reg % 2))
return -EINVAL;
if (reg % 4) {
u16 lo;
u32 hi;
b53_mmap_read16(dev, page, reg, &lo);
b53_mmap_read32(dev, page, reg + 2, &hi);
*val = ((u64)hi << 16) | lo;
} else {
u32 lo;
u16 hi;
b53_mmap_read32(dev, page, reg, &lo);
b53_mmap_read16(dev, page, reg + 4, &hi);
*val = ((u64)hi << 32) | lo;
}
return 0;
}
static int b53_mmap_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
u32 hi, lo;
if (WARN_ON(reg % 4))
return -EINVAL;
b53_mmap_read32(dev, page, reg, &lo);
b53_mmap_read32(dev, page, reg + 4, &hi);
*val = ((u64)hi << 32) | lo;
return 0;
}
static int b53_mmap_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
u8 __iomem *regs = dev->priv;
writeb(value, regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 2))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
__raw_writew(value, regs + (page << 8) + reg);
else
writew(value, regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
u8 __iomem *regs = dev->priv;
if (WARN_ON(reg % 4))
return -EINVAL;
if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) && dev->pdata &&
dev->pdata->big_endian)
__raw_writel(value, regs + (page << 8) + reg);
else
writel(value, regs + (page << 8) + reg);
return 0;
}
static int b53_mmap_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
if (WARN_ON(reg % 2))
return -EINVAL;
if (reg % 4) {
u32 hi = (u32)(value >> 16);
u16 lo = (u16)value;
b53_mmap_write16(dev, page, reg, lo);
b53_mmap_write32(dev, page, reg + 2, hi);
} else {
u16 hi = (u16)(value >> 32);
u32 lo = (u32)value;
b53_mmap_write32(dev, page, reg, lo);
b53_mmap_write16(dev, page, reg + 4, hi);
}
return 0;
}
static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
u32 hi, lo;
hi = upper_32_bits(value);
lo = lower_32_bits(value);
if (WARN_ON(reg % 4))
return -EINVAL;
b53_mmap_write32(dev, page, reg, lo);
b53_mmap_write32(dev, page, reg + 4, hi);
return 0;
}
static struct b53_io_ops b53_mmap_ops = {
.read8 = b53_mmap_read8,
.read16 = b53_mmap_read16,
.read32 = b53_mmap_read32,
.read48 = b53_mmap_read48,
.read64 = b53_mmap_read64,
.write8 = b53_mmap_write8,
.write16 = b53_mmap_write16,
.write32 = b53_mmap_write32,
.write48 = b53_mmap_write48,
.write64 = b53_mmap_write64,
};
static int b53_mmap_probe(struct platform_device *pdev)
{
struct b53_platform_data *pdata = pdev->dev.platform_data;
struct b53_device *dev;
if (!pdata)
return -EINVAL;
dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, pdata->regs);
if (!dev)
return -ENOMEM;
if (pdata)
dev->pdata = pdata;
platform_set_drvdata(pdev, dev);
return b53_switch_register(dev);
}
static int b53_mmap_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
if (dev)
b53_switch_remove(dev);
return 0;
}
static const struct of_device_id b53_mmap_of_table[] = {
{ .compatible = "brcm,bcm3384-switch" },
{ .compatible = "brcm,bcm6328-switch" },
{ .compatible = "brcm,bcm6368-switch" },
{ .compatible = "brcm,bcm63xx-switch" },
{ /* sentinel */ },
};
static struct platform_driver b53_mmap_driver = {
.probe = b53_mmap_probe,
.remove = b53_mmap_remove,
.driver = {
.name = "b53-switch",
.of_match_table = b53_mmap_of_table,
},
};
module_platform_driver(b53_mmap_driver);
MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
MODULE_DESCRIPTION("B53 MMAP access driver");
MODULE_LICENSE("Dual BSD/GPL");
drivers/net/dsa/b53/b53_priv.h 0 → 100644
View file @ 967dd82f
/*
* B53 common definitions
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __B53_PRIV_H
#define __B53_PRIV_H
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/phy.h>
#include <net/dsa.h>
struct b53_device;
struct b53_io_ops {
int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value);
int (*read16)(struct b53_device *dev, u8 page, u8 reg, u16 *value);
int (*read32)(struct b53_device *dev, u8 page, u8 reg, u32 *value);
int (*read48)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
int (*read64)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
int (*write8)(struct b53_device *dev, u8 page, u8 reg, u8 value);
int (*write16)(struct b53_device *dev, u8 page, u8 reg, u16 value);
int (*write32)(struct b53_device *dev, u8 page, u8 reg, u32 value);
int (*write48)(struct b53_device *dev, u8 page, u8 reg, u64 value);
int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value);
int (*phy_read16)(struct b53_device *dev, int addr, int reg, u16 *value);
int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value);
};
enum {
BCM5325_DEVICE_ID = 0x25,
BCM5365_DEVICE_ID = 0x65,
BCM5395_DEVICE_ID = 0x95,
BCM5397_DEVICE_ID = 0x97,
BCM5398_DEVICE_ID = 0x98,
BCM53115_DEVICE_ID = 0x53115,
BCM53125_DEVICE_ID = 0x53125,
BCM53128_DEVICE_ID = 0x53128,
BCM63XX_DEVICE_ID = 0x6300,
BCM53010_DEVICE_ID = 0x53010,
BCM53011_DEVICE_ID = 0x53011,
BCM53012_DEVICE_ID = 0x53012,
BCM53018_DEVICE_ID = 0x53018,
BCM53019_DEVICE_ID = 0x53019,
};
#define B53_N_PORTS 9
#define B53_N_PORTS_25 6
struct b53_port {
};
struct b53_device {
struct dsa_switch *ds;
struct b53_platform_data *pdata;
const char *name;
struct mutex reg_mutex;
struct mutex stats_mutex;
const struct b53_io_ops *ops;
/* chip specific data */
u32 chip_id;
u8 core_rev;
u8 vta_regs[3];
u8 duplex_reg;
u8 jumbo_pm_reg;
u8 jumbo_size_reg;
int reset_gpio;
/* used ports mask */
u16 enabled_ports;
unsigned int cpu_port;
/* connect specific data */
u8 current_page;
struct device *dev;
/* Master MDIO bus we got probed from */
struct mii_bus *bus;
/* Slave MDIO bus we created */
struct mii_bus *slave_bus;
void *priv;
/* run time configuration */
unsigned enable_jumbo:1;
unsigned allow_vid_4095:1;
unsigned int num_vlans;
unsigned int num_ports;
struct b53_port *ports;
};
#define b53_for_each_port(dev, i) \
for (i = 0; i < B53_N_PORTS; i++) \
if (dev->enabled_ports & BIT(i))
static inline int is5325(struct b53_device *dev)
{
return dev->chip_id == BCM5325_DEVICE_ID;
}
static inline int is5365(struct b53_device *dev)
{
#ifdef CONFIG_BCM47XX
return dev->chip_id == BCM5365_DEVICE_ID;
#else
return 0;
#endif
}
static inline int is5397_98(struct b53_device *dev)
{
return dev->chip_id == BCM5397_DEVICE_ID ||
dev->chip_id == BCM5398_DEVICE_ID;
}
static inline int is539x(struct b53_device *dev)
{
return dev->chip_id == BCM5395_DEVICE_ID ||
dev->chip_id == BCM5397_DEVICE_ID ||
dev->chip_id == BCM5398_DEVICE_ID;
}
static inline int is531x5(struct b53_device *dev)
{
return dev->chip_id == BCM53115_DEVICE_ID ||
dev->chip_id == BCM53125_DEVICE_ID ||
dev->chip_id == BCM53128_DEVICE_ID;
}
static inline int is63xx(struct b53_device *dev)
{
#ifdef CONFIG_BCM63XX
return dev->chip_id == BCM63XX_DEVICE_ID;
#else
return 0;
#endif
}
static inline int is5301x(struct b53_device *dev)
{
return dev->chip_id == BCM53010_DEVICE_ID ||
dev->chip_id == BCM53011_DEVICE_ID ||
dev->chip_id == BCM53012_DEVICE_ID ||
dev->chip_id == BCM53018_DEVICE_ID ||
dev->chip_id == BCM53019_DEVICE_ID;
}
#define B53_CPU_PORT_25 5
#define B53_CPU_PORT 8
static inline int is_cpu_port(struct b53_device *dev, int port)
{
return dev->cpu_port;
}
struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
void *priv);
int b53_switch_detect(struct b53_device *dev);
int b53_switch_register(struct b53_device *dev);
static inline void b53_switch_remove(struct b53_device *dev)
{
dsa_unregister_switch(dev->ds);
}
static inline int b53_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read8(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read16(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read32(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read48(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->read64(dev, page, reg, val);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write8(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write16(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write32(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write48(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
int ret;
mutex_lock(&dev->reg_mutex);
ret = dev->ops->write64(dev, page, reg, value);
mutex_unlock(&dev->reg_mutex);
return ret;
}
#ifdef CONFIG_BCM47XX
#include <linux/version.h>
#include <linux/bcm47xx_nvram.h>
#include <bcm47xx_board.h>
static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
{
enum bcm47xx_board board = bcm47xx_board_get();
switch (board) {
case BCM47XX_BOARD_LINKSYS_WRT300NV11:
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
return 8;
default:
return bcm47xx_nvram_gpio_pin("robo_reset");
}
}
#else
static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
{
return -ENOENT;
}
#endif
#endif
drivers/net/dsa/b53/b53_regs.h 0 → 100644
View file @ 967dd82f
/*
* B53 register definitions
*
* Copyright (C) 2004 Broadcom Corporation
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __B53_REGS_H
#define __B53_REGS_H
/* Management Port (SMP) Page offsets */
#define B53_CTRL_PAGE 0x00 /* Control */
#define B53_STAT_PAGE 0x01 /* Status */
#define B53_MGMT_PAGE 0x02 /* Management Mode */
#define B53_MIB_AC_PAGE 0x03 /* MIB Autocast */
#define B53_ARLCTRL_PAGE 0x04 /* ARL Control */
#define B53_ARLIO_PAGE 0x05 /* ARL Access */
#define B53_FRAMEBUF_PAGE 0x06 /* Management frame access */
#define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */
/* PHY Registers */
#define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */
#define B53_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */
#define B53_ALL_PORT_PAGE 0x19 /* All ports MII (broadcast) */
/* MIB registers */
#define B53_MIB_PAGE(i) (0x20 + (i))
/* Quality of Service (QoS) Registers */
#define B53_QOS_PAGE 0x30
/* Port VLAN Page */
#define B53_PVLAN_PAGE 0x31
/* VLAN Registers */
#define B53_VLAN_PAGE 0x34
/* Jumbo Frame Registers */
#define B53_JUMBO_PAGE 0x40
/* CFP Configuration Registers Page */
#define B53_CFP_PAGE 0xa1
/*************************************************************************
* Control Page registers
*************************************************************************/
/* Port Control Register (8 bit) */
#define B53_PORT_CTRL(i) (0x00 + (i))
#define PORT_CTRL_RX_DISABLE BIT(0)
#define PORT_CTRL_TX_DISABLE BIT(1)
#define PORT_CTRL_RX_BCST_EN BIT(2) /* Broadcast RX (P8 only) */
#define PORT_CTRL_RX_MCST_EN BIT(3) /* Multicast RX (P8 only) */
#define PORT_CTRL_RX_UCST_EN BIT(4) /* Unicast RX (P8 only) */
#define PORT_CTRL_STP_STATE_S 5
#define PORT_CTRL_STP_STATE_MASK (0x7 << PORT_CTRL_STP_STATE_S)
/* SMP Control Register (8 bit) */
#define B53_SMP_CTRL 0x0a
/* Switch Mode Control Register (8 bit) */
#define B53_SWITCH_MODE 0x0b
#define SM_SW_FWD_MODE BIT(0) /* 1 = Managed Mode */
#define SM_SW_FWD_EN BIT(1) /* Forwarding Enable */
/* IMP Port state override register (8 bit) */
#define B53_PORT_OVERRIDE_CTRL 0x0e
#define PORT_OVERRIDE_LINK BIT(0)
#define PORT_OVERRIDE_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */
#define PORT_OVERRIDE_SPEED_S 2
#define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S)
#define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */
#define PORT_OVERRIDE_RX_FLOW BIT(4)
#define PORT_OVERRIDE_TX_FLOW BIT(5)
#define PORT_OVERRIDE_SPEED_2000M BIT(6) /* BCM5301X only, requires setting 1000M */
#define PORT_OVERRIDE_EN BIT(7) /* Use the register contents */
/* Power-down mode control */
#define B53_PD_MODE_CTRL_25 0x0f
/* IP Multicast control (8 bit) */
#define B53_IP_MULTICAST_CTRL 0x21
#define B53_IPMC_FWD_EN BIT(1)
#define B53_UC_FWD_EN BIT(6)
#define B53_MC_FWD_EN BIT(7)
/* (16 bit) */
#define B53_UC_FLOOD_MASK 0x32
#define B53_MC_FLOOD_MASK 0x34
#define B53_IPMC_FLOOD_MASK 0x36
/*
* Override Ports 0-7 State on devices with xMII interfaces (8 bit)
*
* For port 8 still use B53_PORT_OVERRIDE_CTRL
* Please note that not all ports are available on every hardware, e.g. BCM5301X
* don't include overriding port 6, BCM63xx also have some limitations.
*/
#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + (i))
#define GMII_PO_LINK BIT(0)
#define GMII_PO_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */
#define GMII_PO_SPEED_S 2
#define GMII_PO_SPEED_10M (0 << GMII_PO_SPEED_S)
#define GMII_PO_SPEED_100M (1 << GMII_PO_SPEED_S)
#define GMII_PO_SPEED_1000M (2 << GMII_PO_SPEED_S)
#define GMII_PO_RX_FLOW BIT(4)
#define GMII_PO_TX_FLOW BIT(5)
#define GMII_PO_EN BIT(6) /* Use the register contents */
#define GMII_PO_SPEED_2000M BIT(7) /* BCM5301X only, requires setting 1000M */
#define B53_RGMII_CTRL_IMP 0x60
#define RGMII_CTRL_ENABLE_GMII BIT(7)
#define RGMII_CTRL_TIMING_SEL BIT(2)
#define RGMII_CTRL_DLL_RXC BIT(1)
#define RGMII_CTRL_DLL_TXC BIT(0)
#define B53_RGMII_CTRL_P(i) (B53_RGMII_CTRL_IMP + (i))
/* Software reset register (8 bit) */
#define B53_SOFTRESET 0x79
#define SW_RST BIT(7)
#define EN_SW_RST BIT(4)
/* Fast Aging Control register (8 bit) */
#define B53_FAST_AGE_CTRL 0x88
#define FAST_AGE_STATIC BIT(0)
#define FAST_AGE_DYNAMIC BIT(1)
#define FAST_AGE_PORT BIT(2)
#define FAST_AGE_VLAN BIT(3)
#define FAST_AGE_STP BIT(4)
#define FAST_AGE_MC BIT(5)
#define FAST_AGE_DONE BIT(7)
/*************************************************************************
* Status Page registers
*************************************************************************/
/* Link Status Summary Register (16bit) */
#define B53_LINK_STAT 0x00
/* Link Status Change Register (16 bit) */
#define B53_LINK_STAT_CHANGE 0x02
/* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */
#define B53_SPEED_STAT 0x04
#define SPEED_PORT_FE(reg, port) (((reg) >> (port)) & 1)
#define SPEED_PORT_GE(reg, port) (((reg) >> 2 * (port)) & 3)
#define SPEED_STAT_10M 0
#define SPEED_STAT_100M 1
#define SPEED_STAT_1000M 2
/* Duplex Status Summary (16 bit) */
#define B53_DUPLEX_STAT_FE 0x06
#define B53_DUPLEX_STAT_GE 0x08
#define B53_DUPLEX_STAT_63XX 0x0c
/* Revision ID register for BCM5325 */
#define B53_REV_ID_25 0x50
/* Strap Value (48 bit) */
#define B53_STRAP_VALUE 0x70
#define SV_GMII_CTRL_115 BIT(27)
/*************************************************************************
* Management Mode Page Registers
*************************************************************************/
/* Global Management Config Register (8 bit) */
#define B53_GLOBAL_CONFIG 0x00
#define GC_RESET_MIB 0x01
#define GC_RX_BPDU_EN 0x02
#define GC_MIB_AC_HDR_EN 0x10
#define GC_MIB_AC_EN 0x20
#define GC_FRM_MGMT_PORT_M 0xC0
#define GC_FRM_MGMT_PORT_04 0x00
#define GC_FRM_MGMT_PORT_MII 0x80
/* Broadcom Header control register (8 bit) */
#define B53_BRCM_HDR 0x03
#define BRCM_HDR_P8_EN BIT(0) /* Enable tagging on port 8 */
#define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */
/* Device ID register (8 or 32 bit) */
#define B53_DEVICE_ID 0x30
/* Revision ID register (8 bit) */
#define B53_REV_ID 0x40
/*************************************************************************
* ARL Access Page Registers
*************************************************************************/
/* VLAN Table Access Register (8 bit) */
#define B53_VT_ACCESS 0x80
#define B53_VT_ACCESS_9798 0x60 /* for BCM5397/BCM5398 */
#define B53_VT_ACCESS_63XX 0x60 /* for BCM6328/62/68 */
#define VTA_CMD_WRITE 0
#define VTA_CMD_READ 1
#define VTA_CMD_CLEAR 2
#define VTA_START_CMD BIT(7)
/* VLAN Table Index Register (16 bit) */
#define B53_VT_INDEX 0x81
#define B53_VT_INDEX_9798 0x61
#define B53_VT_INDEX_63XX 0x62
/* VLAN Table Entry Register (32 bit) */
#define B53_VT_ENTRY 0x83
#define B53_VT_ENTRY_9798 0x63
#define B53_VT_ENTRY_63XX 0x64
#define VTE_MEMBERS 0x1ff
#define VTE_UNTAG_S 9
#define VTE_UNTAG (0x1ff << 9)
/*************************************************************************
* Port VLAN Registers
*************************************************************************/
/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
#define B53_PVLAN_PORT_MASK(i) ((i) * 2)
/*************************************************************************
* 802.1Q Page Registers
*************************************************************************/
/* Global QoS Control (8 bit) */
#define B53_QOS_GLOBAL_CTL 0x00
/* Enable 802.1Q for individual Ports (16 bit) */
#define B53_802_1P_EN 0x04
/*************************************************************************
* VLAN Page Registers
*************************************************************************/
/* VLAN Control 0 (8 bit) */
#define B53_VLAN_CTRL0 0x00
#define VC0_8021PF_CTRL_MASK 0x3
#define VC0_8021PF_CTRL_NONE 0x0
#define VC0_8021PF_CTRL_CHANGE_PRI 0x1
#define VC0_8021PF_CTRL_CHANGE_VID 0x2
#define VC0_8021PF_CTRL_CHANGE_BOTH 0x3
#define VC0_8021QF_CTRL_MASK 0xc
#define VC0_8021QF_CTRL_CHANGE_PRI 0x1
#define VC0_8021QF_CTRL_CHANGE_VID 0x2
#define VC0_8021QF_CTRL_CHANGE_BOTH 0x3
#define VC0_RESERVED_1 BIT(1)
#define VC0_DROP_VID_MISS BIT(4)
#define VC0_VID_HASH_VID BIT(5)
#define VC0_VID_CHK_EN BIT(6) /* Use VID,DA or VID,SA */
#define VC0_VLAN_EN BIT(7) /* 802.1Q VLAN Enabled */
/* VLAN Control 1 (8 bit) */
#define B53_VLAN_CTRL1 0x01
#define VC1_RX_MCST_TAG_EN BIT(1)
#define VC1_RX_MCST_FWD_EN BIT(2)
#define VC1_RX_MCST_UNTAG_EN BIT(3)
/* VLAN Control 2 (8 bit) */
#define B53_VLAN_CTRL2 0x02
/* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */
#define B53_VLAN_CTRL3 0x03
#define B53_VLAN_CTRL3_63XX 0x04
#define VC3_MAXSIZE_1532 BIT(6) /* 5325 only */
#define VC3_HIGH_8BIT_EN BIT(7) /* 5325 only */
/* VLAN Control 4 (8 bit) */
#define B53_VLAN_CTRL4 0x05
#define B53_VLAN_CTRL4_25 0x04
#define B53_VLAN_CTRL4_63XX 0x06
#define VC4_ING_VID_CHECK_S 6
#define VC4_ING_VID_CHECK_MASK (0x3 << VC4_ING_VID_CHECK_S)
#define VC4_ING_VID_VIO_FWD 0 /* forward, but do not learn */
#define VC4_ING_VID_VIO_DROP 1 /* drop VID violations */
#define VC4_NO_ING_VID_CHK 2 /* do not check */
#define VC4_ING_VID_VIO_TO_IMP 3 /* redirect to MII port */
/* VLAN Control 5 (8 bit) */
#define B53_VLAN_CTRL5 0x06
#define B53_VLAN_CTRL5_25 0x05
#define B53_VLAN_CTRL5_63XX 0x07
#define VC5_VID_FFF_EN BIT(2)
#define VC5_DROP_VTABLE_MISS BIT(3)
/* VLAN Control 6 (8 bit) */
#define B53_VLAN_CTRL6 0x07
#define B53_VLAN_CTRL6_63XX 0x08
/* VLAN Table Access Register (16 bit) */
#define B53_VLAN_TABLE_ACCESS_25 0x06 /* BCM5325E/5350 */
#define B53_VLAN_TABLE_ACCESS_65 0x08 /* BCM5365 */
#define VTA_VID_LOW_MASK_25 0xf
#define VTA_VID_LOW_MASK_65 0xff
#define VTA_VID_HIGH_S_25 4
#define VTA_VID_HIGH_S_65 8
#define VTA_VID_HIGH_MASK_25 (0xff << VTA_VID_HIGH_S_25E)
#define VTA_VID_HIGH_MASK_65 (0xf << VTA_VID_HIGH_S_65)
#define VTA_RW_STATE BIT(12)
#define VTA_RW_STATE_RD 0
#define VTA_RW_STATE_WR BIT(12)
#define VTA_RW_OP_EN BIT(13)
/* VLAN Read/Write Registers for (16/32 bit) */
#define B53_VLAN_WRITE_25 0x08
#define B53_VLAN_WRITE_65 0x0a
#define B53_VLAN_READ 0x0c
#define VA_MEMBER_MASK 0x3f
#define VA_UNTAG_S_25 6
#define VA_UNTAG_MASK_25 0x3f
#define VA_UNTAG_S_65 7
#define VA_UNTAG_MASK_65 0x1f
#define VA_VID_HIGH_S 12
#define VA_VID_HIGH_MASK (0xffff << VA_VID_HIGH_S)
#define VA_VALID_25 BIT(20)
#define VA_VALID_25_R4 BIT(24)
#define VA_VALID_65 BIT(14)
/* VLAN Port Default Tag (16 bit) */
#define B53_VLAN_PORT_DEF_TAG(i) (0x10 + 2 * (i))
/*************************************************************************
* Jumbo Frame Page Registers
*************************************************************************/
/* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */
#define B53_JUMBO_PORT_MASK 0x01
#define B53_JUMBO_PORT_MASK_63XX 0x04
#define JPM_10_100_JUMBO_EN BIT(24) /* GigE always enabled */
/* Good Frame Max Size without 802.1Q TAG (16 bit) */
#define B53_JUMBO_MAX_SIZE 0x05
#define B53_JUMBO_MAX_SIZE_63XX 0x08
#define JMS_MIN_SIZE 1518
#define JMS_MAX_SIZE 9724
/*************************************************************************
* CFP Configuration Page Registers
*************************************************************************/
/* CFP Control Register with ports map (8 bit) */
#define B53_CFP_CTRL 0x00
#endif /* !__B53_REGS_H */
drivers/net/dsa/b53/b53_spi.c 0 → 100644
View file @ 967dd82f
/*
* B53 register access through SPI
*
* Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <asm/unaligned.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/b53.h>
#include "b53_priv.h"
#define B53_SPI_DATA 0xf0
#define B53_SPI_STATUS 0xfe
#define B53_SPI_CMD_SPIF BIT(7)
#define B53_SPI_CMD_RACK BIT(5)
#define B53_SPI_CMD_READ 0x00
#define B53_SPI_CMD_WRITE 0x01
#define B53_SPI_CMD_NORMAL 0x60
#define B53_SPI_CMD_FAST 0x10
#define B53_SPI_PAGE_SELECT 0xff
static inline int b53_spi_read_reg(struct spi_device *spi, u8 reg, u8 *val,
unsigned int len)
{
u8 txbuf[2];
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_READ;
txbuf[1] = reg;
return spi_write_then_read(spi, txbuf, 2, val, len);
}
static inline int b53_spi_clear_status(struct spi_device *spi)
{
unsigned int i;
u8 rxbuf;
int ret;
for (i = 0; i < 10; i++) {
ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
if (ret)
return ret;
if (!(rxbuf & B53_SPI_CMD_SPIF))
break;
mdelay(1);
}
if (i == 10)
return -EIO;
return 0;
}
static inline int b53_spi_set_page(struct spi_device *spi, u8 page)
{
u8 txbuf[3];
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = B53_SPI_PAGE_SELECT;
txbuf[2] = page;
return spi_write(spi, txbuf, sizeof(txbuf));
}
static inline int b53_prepare_reg_access(struct spi_device *spi, u8 page)
{
int ret = b53_spi_clear_status(spi);
if (ret)
return ret;
return b53_spi_set_page(spi, page);
}
static int b53_spi_prepare_reg_read(struct spi_device *spi, u8 reg)
{
u8 rxbuf;
int retry_count;
int ret;
ret = b53_spi_read_reg(spi, reg, &rxbuf, 1);
if (ret)
return ret;
for (retry_count = 0; retry_count < 10; retry_count++) {
ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
if (ret)
return ret;
if (rxbuf & B53_SPI_CMD_RACK)
break;
mdelay(1);
}
if (retry_count == 10)
return -EIO;
return 0;
}
static int b53_spi_read(struct b53_device *dev, u8 page, u8 reg, u8 *data,
unsigned int len)
{
struct spi_device *spi = dev->priv;
int ret;
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
ret = b53_spi_prepare_reg_read(spi, reg);
if (ret)
return ret;
return b53_spi_read_reg(spi, B53_SPI_DATA, data, len);
}
static int b53_spi_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
return b53_spi_read(dev, page, reg, val, 1);
}
static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
int ret = b53_spi_read(dev, page, reg, (u8 *)val, 2);
if (!ret)
*val = le16_to_cpu(*val);
return ret;
}
static int b53_spi_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
int ret = b53_spi_read(dev, page, reg, (u8 *)val, 4);
if (!ret)
*val = le32_to_cpu(*val);
return ret;
}
static int b53_spi_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret;
*val = 0;
ret = b53_spi_read(dev, page, reg, (u8 *)val, 6);
if (!ret)
*val = le64_to_cpu(*val);
return ret;
}
static int b53_spi_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
int ret = b53_spi_read(dev, page, reg, (u8 *)val, 8);
if (!ret)
*val = le64_to_cpu(*val);
return ret;
}
static int b53_spi_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[3];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
txbuf[2] = value;
return spi_write(spi, txbuf, sizeof(txbuf));
}
static int b53_spi_write16(struct b53_device *dev, u8 page, u8 reg, u16 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[4];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le16(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf));
}
static int b53_spi_write32(struct b53_device *dev, u8 page, u8 reg, u32 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[6];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le32(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf));
}
static int b53_spi_write48(struct b53_device *dev, u8 page, u8 reg, u64 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[10];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le64(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf) - 2);
}
static int b53_spi_write64(struct b53_device *dev, u8 page, u8 reg, u64 value)
{
struct spi_device *spi = dev->priv;
int ret;
u8 txbuf[10];
ret = b53_prepare_reg_access(spi, page);
if (ret)
return ret;
txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
txbuf[1] = reg;
put_unaligned_le64(value, &txbuf[2]);
return spi_write(spi, txbuf, sizeof(txbuf));
}
static struct b53_io_ops b53_spi_ops = {
.read8 = b53_spi_read8,
.read16 = b53_spi_read16,
.read32 = b53_spi_read32,
.read48 = b53_spi_read48,
.read64 = b53_spi_read64,
.write8 = b53_spi_write8,
.write16 = b53_spi_write16,
.write32 = b53_spi_write32,
.write48 = b53_spi_write48,
.write64 = b53_spi_write64,
};
static int b53_spi_probe(struct spi_device *spi)
{
struct b53_device *dev;
int ret;
dev = b53_switch_alloc(&spi->dev, &b53_spi_ops, spi);
if (!dev)
return -ENOMEM;
if (spi->dev.platform_data)
dev->pdata = spi->dev.platform_data;
ret = b53_switch_register(dev);
if (ret)
return ret;
spi_set_drvdata(spi, dev);
return 0;
}
static int b53_spi_remove(struct spi_device *spi)
{
struct b53_device *dev = spi_get_drvdata(spi);
if (dev)
b53_switch_remove(dev);
return 0;
}
static struct spi_driver b53_spi_driver = {
.driver = {
.name = "b53-switch",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = b53_spi_probe,
.remove = b53_spi_remove,
};
module_spi_driver(b53_spi_driver);
MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
MODULE_DESCRIPTION("B53 SPI access driver");
MODULE_LICENSE("Dual BSD/GPL");
drivers/net/dsa/b53/b53_srab.c 0 → 100644
View file @ 967dd82f
/*
* B53 register access through Switch Register Access Bridge Registers
*
* Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/platform_data/b53.h>
#include "b53_priv.h"
/* command and status register of the SRAB */
#define B53_SRAB_CMDSTAT 0x2c
#define B53_SRAB_CMDSTAT_RST BIT(2)
#define B53_SRAB_CMDSTAT_WRITE BIT(1)
#define B53_SRAB_CMDSTAT_GORDYN BIT(0)
#define B53_SRAB_CMDSTAT_PAGE 24
#define B53_SRAB_CMDSTAT_REG 16
/* high order word of write data to switch registe */
#define B53_SRAB_WD_H 0x30
/* low order word of write data to switch registe */
#define B53_SRAB_WD_L 0x34
/* high order word of read data from switch register */
#define B53_SRAB_RD_H 0x38
/* low order word of read data from switch register */
#define B53_SRAB_RD_L 0x3c
/* command and status register of the SRAB */
#define B53_SRAB_CTRLS 0x40
#define B53_SRAB_CTRLS_RCAREQ BIT(3)
#define B53_SRAB_CTRLS_RCAGNT BIT(4)
#define B53_SRAB_CTRLS_SW_INIT_DONE BIT(6)
/* the register captures interrupt pulses from the switch */
#define B53_SRAB_INTR 0x44
#define B53_SRAB_INTR_P(x) BIT(x)
#define B53_SRAB_SWITCH_PHY BIT(8)
#define B53_SRAB_1588_SYNC BIT(9)
#define B53_SRAB_IMP1_SLEEP_TIMER BIT(10)
#define B53_SRAB_P7_SLEEP_TIMER BIT(11)
#define B53_SRAB_IMP0_SLEEP_TIMER BIT(12)
struct b53_srab_priv {
void __iomem *regs;
};
static int b53_srab_request_grant(struct b53_device *dev)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
u32 ctrls;
int i;
ctrls = readl(regs + B53_SRAB_CTRLS);
ctrls |= B53_SRAB_CTRLS_RCAREQ;
writel(ctrls, regs + B53_SRAB_CTRLS);
for (i = 0; i < 20; i++) {
ctrls = readl(regs + B53_SRAB_CTRLS);
if (ctrls & B53_SRAB_CTRLS_RCAGNT)
break;
usleep_range(10, 100);
}
if (WARN_ON(i == 5))
return -EIO;
return 0;
}
static void b53_srab_release_grant(struct b53_device *dev)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
u32 ctrls;
ctrls = readl(regs + B53_SRAB_CTRLS);
ctrls &= ~B53_SRAB_CTRLS_RCAREQ;
writel(ctrls, regs + B53_SRAB_CTRLS);
}
static int b53_srab_op(struct b53_device *dev, u8 page, u8 reg, u32 op)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int i;
u32 cmdstat;
/* set register address */
cmdstat = (page << B53_SRAB_CMDSTAT_PAGE) |
(reg << B53_SRAB_CMDSTAT_REG) |
B53_SRAB_CMDSTAT_GORDYN |
op;
writel(cmdstat, regs + B53_SRAB_CMDSTAT);
/* check if operation completed */
for (i = 0; i < 5; ++i) {
cmdstat = readl(regs + B53_SRAB_CMDSTAT);
if (!(cmdstat & B53_SRAB_CMDSTAT_GORDYN))
break;
usleep_range(10, 100);
}
if (WARN_ON(i == 5))
return -EIO;
return 0;
}
static int b53_srab_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L) & 0xff;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L) & 0xffff;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L);
*val += ((u64)readl(regs + B53_SRAB_RD_H) & 0xffff) << 32;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
ret = b53_srab_op(dev, page, reg, 0);
if (ret)
goto err;
*val = readl(regs + B53_SRAB_RD_L);
*val += (u64)readl(regs + B53_SRAB_RD_H) << 32;
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel(value, regs + B53_SRAB_WD_L);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write16(struct b53_device *dev, u8 page, u8 reg,
u16 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel(value, regs + B53_SRAB_WD_L);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write32(struct b53_device *dev, u8 page, u8 reg,
u32 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel(value, regs + B53_SRAB_WD_L);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write48(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel((u32)value, regs + B53_SRAB_WD_L);
writel((u16)(value >> 32), regs + B53_SRAB_WD_H);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
u64 value)
{
struct b53_srab_priv *priv = dev->priv;
u8 __iomem *regs = priv->regs;
int ret = 0;
ret = b53_srab_request_grant(dev);
if (ret)
goto err;
writel((u32)value, regs + B53_SRAB_WD_L);
writel((u32)(value >> 32), regs + B53_SRAB_WD_H);
ret = b53_srab_op(dev, page, reg, B53_SRAB_CMDSTAT_WRITE);
err:
b53_srab_release_grant(dev);
return ret;
}
static struct b53_io_ops b53_srab_ops = {
.read8 = b53_srab_read8,
.read16 = b53_srab_read16,
.read32 = b53_srab_read32,
.read48 = b53_srab_read48,
.read64 = b53_srab_read64,
.write8 = b53_srab_write8,
.write16 = b53_srab_write16,
.write32 = b53_srab_write32,
.write48 = b53_srab_write48,
.write64 = b53_srab_write64,
};
static int b53_srab_probe(struct platform_device *pdev)
{
struct b53_srab_priv *priv;
struct b53_device *dev;
struct resource *r;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->regs = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(priv->regs))
return -ENOMEM;
dev = b53_switch_alloc(&pdev->dev, &b53_srab_ops, priv);
if (!dev)
return -ENOMEM;
platform_set_drvdata(pdev, dev);
return b53_switch_register(dev);
}
static int b53_srab_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
if (dev)
b53_switch_remove(dev);
return 0;
}
static const struct of_device_id b53_srab_of_match[] = {
{ .compatible = "brcm,bcm53010-srab" },
{ .compatible = "brcm,bcm53011-srab" },
{ .compatible = "brcm,bcm53012-srab" },
{ .compatible = "brcm,bcm53018-srab" },
{ .compatible = "brcm,bcm53019-srab" },
{ .compatible = "brcm,bcm5301x-srab" },
{ /* sentinel */ },
};
static struct platform_driver b53_srab_driver = {
.probe = b53_srab_probe,
.remove = b53_srab_remove,
.driver = {
.name = "b53-srab-switch",
.of_match_table = b53_srab_of_match,
},
};
module_platform_driver(b53_srab_driver);
MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
MODULE_DESCRIPTION("B53 Switch Register Access Bridge Registers (SRAB) access driver");
MODULE_LICENSE("Dual BSD/GPL");
include/linux/platform_data/b53.h 0 → 100644
View file @ 967dd82f
/*
* B53 platform data
*
* Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __B53_H
#define __B53_H
#include <linux/kernel.h>
struct b53_platform_data {
u32 chip_id;
u16 enabled_ports;
/* only used by MMAP'd driver */
unsigned big_endian:1;
void __iomem *regs;
};
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7