Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c
  ide-disk: set non-rotational queue flag for SSD and CF devices
  ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list
  ide: Add tx4938ide driver (v2)
  TXx9: Add TX4938 ATA support (v3)
  ide: Add tx4939ide driver (v6)
  ide: two more pci_ioremap_bar() conversions
  pci: use pci_ioremap_bar() in drivers/ide
  sgiioc4: use ide_host_add() (take 2)
  sgiioc4: fix error cleanup path (take 2)

arch/mips/include/asm/txx9/tx4938.h

@@ -292,4 +292,17 @@ void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 void tx4938_mtd_init(int ch);
 
+struct tx4938ide_platform_info {
+	/*
+	 * I/O port shift, for platforms with ports that are
+	 * constantly spaced and need larger than the 1-byte
+	 * spacing used by ata_std_ports().
+	 */
+	unsigned int ioport_shift;
+	unsigned int gbus_clock;	/*  0 means no PIO mode tuning. */
+	unsigned int ebus_ch;
+};
+
+void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune);
+
 #endif

arch/mips/txx9/generic/setup_tx4938.c

@@ -16,6 +16,7 @@
 #include <linux/param.h>
 #include <linux/ptrace.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 #include <asm/reboot.h>
 #include <asm/traps.h>
 #include <asm/txx9irq.h>
@@ -335,6 +336,52 @@ void __init tx4938_mtd_init(int ch)
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
+void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune)
+{
+	struct platform_device *pdev;
+	struct resource res[] = {
+		{
+			/* .start and .end are filled in later */
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	struct tx4938ide_platform_info pdata = {
+		.ioport_shift = shift,
+		/*
+		 * The IDE driver should not change bus timings if other ISA
+		 * devices existed.
+		 */
+		.gbus_clock = tune ? txx9_gbus_clock : 0,
+	};
+	u64 ebccr;
+	int i;
+
+	if ((__raw_readq(&tx4938_ccfgptr->pcfg) &
+	     (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_ATA_SEL)
+		return;
+	for (i = 0; i < 8; i++) {
+		/* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */
+		ebccr = __raw_readq(&tx4938_ebuscptr->cr[i]);
+		if ((ebccr & 0x00f00008) == 0x00e00008)
+			break;
+	}
+	if (i == 8)
+		return;
+	pdata.ebus_ch = i;
+	res[0].start = ((ebccr >> 48) << 20) + 0x10000;
+	res[0].end = res[0].start + 0x20000 - 1;
+	pdev = platform_device_alloc("tx4938ide", -1);
+	if (!pdev ||
+	    platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
+	    platform_device_add_data(pdev, &pdata, sizeof(pdata)) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
 static void __init tx4938_stop_unused_modules(void)
 {
 	__u64 pcfg, rst = 0, ckd = 0;

arch/mips/txx9/rbtx4938/setup.c

@@ -352,6 +352,7 @@ static void __init rbtx4938_device_init(void)
 	rbtx4938_ne_init();
 	tx4938_wdt_init();
 	rbtx4938_mtd_init();
+	tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
 	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }
 

drivers/ide/Kconfig

@@ -720,6 +720,16 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
        default "128"
        depends on BLK_DEV_IDE_AU1XXX
 
+config BLK_DEV_IDE_TX4938
+	tristate "TX4938 internal IDE support"
+	depends on SOC_TX4938
+	select IDE_TIMINGS
+
+config BLK_DEV_IDE_TX4939
+	tristate "TX4939 internal IDE support"
+	depends on SOC_TX4939
+	select BLK_DEV_IDEDMA_SFF
+
 config IDE_ARM
 	tristate "ARM IDE support"
 	depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)

drivers/ide/Makefile

@@ -68,7 +68,6 @@ obj-$(CONFIG_BLK_DEV_VIA82CXXX)		+= via82cxxx.o
 
 # Must appear at the end of the block
 obj-$(CONFIG_BLK_DEV_GENERIC)		+= ide-pci-generic.o
-ide-pci-generic-y			+= generic.o
 
 obj-$(CONFIG_IDEPCI_PCIBUS_ORDER)	+= ide-scan-pci.o
 
@@ -111,3 +110,6 @@ obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
 obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)	+= palm_bk3710.o
 
 obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
+
+obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
+obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o

drivers/ide/ide-cd.c

@@ -1966,6 +1966,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = {
 	{ "Optiarc DVD RW AD-5200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-7200A", NULL,   IDE_AFLAG_PLAY_AUDIO_OK	     },
 	{ "Optiarc DVD RW AD-7543A", NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
+	{ "TEAC CD-ROM CD-224E",     NULL,   IDE_AFLAG_NO_AUTOCLOSE	     },
 	{ NULL, NULL, 0 }
 };
 

drivers/ide/ide-disk.c

@@ -600,6 +600,7 @@ static int ide_disk_check(ide_drive_t *drive, const char *s)
 static void ide_disk_setup(ide_drive_t *drive)
 {
 	struct ide_disk_obj *idkp = drive->driver_data;
+	struct request_queue *q = drive->queue;
 	ide_hwif_t *hwif = drive->hwif;
 	u16 *id = drive->id;
 	char *m = (char *)&id[ATA_ID_PROD];
@@ -626,11 +627,14 @@ static void ide_disk_setup(ide_drive_t *drive)
 		if (max_s > hwif->rqsize)
 			max_s = hwif->rqsize;
 
-		blk_queue_max_sectors(drive->queue, max_s);
+		blk_queue_max_sectors(q, max_s);
 	}
 
 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
-			 drive->queue->max_sectors / 2);
+		q->max_sectors / 2);
+
+	if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 
 	/* calculate drive capacity, and select LBA if possible */
 	ide_disk_get_capacity(drive);

drivers/ide/scc_pata.c

@@ -536,10 +536,6 @@ static u8 scc_udma_filter(ide_drive_t *drive)
 
 static int setup_mmio_scc (struct pci_dev *dev, const char *name)
 {
-	unsigned long ctl_base = pci_resource_start(dev, 0);
-	unsigned long dma_base = pci_resource_start(dev, 1);
-	unsigned long ctl_size = pci_resource_len(dev, 0);
-	unsigned long dma_size = pci_resource_len(dev, 1);
 	void __iomem *ctl_addr;
 	void __iomem *dma_addr;
 	int i, ret;
@@ -557,10 +553,12 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name)
 		return ret;
 	}
 
-	if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
+	ctl_addr = pci_ioremap_bar(dev, 0);
+	if (!ctl_addr)
 		goto fail_0;
 
-	if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
+	dma_addr = pci_ioremap_bar(dev, 1);
+	if (!dma_addr)
 		goto fail_1;
 
 	pci_set_master(dev);

drivers/ide/sgiioc4.c

@@ -567,14 +567,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	unsigned long cmd_base, irqport;
 	unsigned long bar0, cmd_phys_base, ctl;
 	void __iomem *virt_base;
-	struct ide_host *host;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-	struct ide_port_info d = sgiioc4_port_info;
 	int rc;
 
 	/*  Get the CmdBlk and CtrlBlk Base Registers */
 	bar0 = pci_resource_start(dev, 0);
-	virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+	virt_base = pci_ioremap_bar(dev, 0);
 	if (virt_base == NULL) {
 		printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 				DRV_NAME, bar0);
@@ -590,7 +588,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 		printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
 		       "already in use\n", DRV_NAME, pci_name(dev),
 		       cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
-		return -EBUSY;
+		rc = -EBUSY;
+		goto req_mem_rgn_err;
 	}
 
 	/* Initialize the IO registers */
@@ -603,21 +602,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	/* Initializing chipset IRQ Registers */
 	writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 
-	host = ide_host_alloc(&d, hws);
-	if (host == NULL) {
-		rc = -ENOMEM;
-		goto err;
-	}
-
-	rc = ide_host_register(host, &d, hws);
-	if (rc)
-		goto err_free;
-
+	rc = ide_host_add(&sgiioc4_port_info, hws, NULL);
+	if (!rc)
 		return 0;
-err_free:
-	ide_host_free(host);
-err:
+
 	release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
+req_mem_rgn_err:
 	iounmap(virt_base);
 	return rc;
 }

drivers/ide/siimage.c

@@ -784,7 +784,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
 			printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
 				"available\n", pci_name(dev));
 		} else {
-			ioaddr = ioremap(bar5, barsize);
+			ioaddr = pci_ioremap_bar(dev, 5);
 			if (ioaddr == NULL)
 				release_mem_region(bar5, barsize);
 		}

drivers/ide/tx4938ide.c

+/*
+ * TX4938 internal IDE driver
+ * Based on tx4939ide.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2005-2007
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/txx9/tx4938.h>
+
+static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
+				 unsigned int gbus_clock,
+				 u8 pio)
+{
+	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
+	u64 cr = __raw_readq(&tx4938_ebuscptr->cr[ebus_ch]);
+	unsigned int sp = (cr >> 4) & 3;
+	unsigned int clock = gbus_clock / (4 - sp);
+	unsigned int cycle = 1000000000 / clock;
+	unsigned int wt, shwt;
+
+	/* Minimum DIOx- active time */
+	wt = DIV_ROUND_UP(t->act8b, cycle) - 2;
+	/* IORDY setup time: 35ns */
+	wt = max(wt, DIV_ROUND_UP(35, cycle));
+	/* actual wait-cycle is max(wt & ~1, 1) */
+	if (wt > 2 && (wt & 1))
+		wt++;
+	wt &= ~1;
+	/* Address-valid to DIOR/DIOW setup */
+	shwt = DIV_ROUND_UP(t->setup, cycle);
+
+	pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n",
+		 ebus_ch, cycle, wt, shwt);
+
+	__raw_writeq((cr & ~(0x3f007ull)) | (wt << 12) | shwt,
+		     &tx4938_ebuscptr->cr[ebus_ch]);
+}
+
+static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct tx4938ide_platform_info *pdata = hwif->dev->platform_data;
+	u8 safe = pio;
+	ide_drive_t *pair;
+
+	pair = ide_get_pair_dev(drive);
+	if (pair)
+		safe = min(safe, ide_get_best_pio_mode(pair, 255, 5));
+	tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe);
+}
+
+#ifdef __BIG_ENDIAN
+
+/* custom iops (independent from SWAP_IO_SPACE) */
+static u8 tx4938ide_inb(unsigned long port)
+{
+	return __raw_readb((void __iomem *)port);
+}
+
+static void tx4938ide_outb(u8 value, unsigned long port)
+{
+	__raw_writeb(value, (void __iomem *)port);
+}
+
+static void tx4938ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = task->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+		u16 data = (tf->hob_data << 8) | tf->data;
+
+		/* no endian swap */
+		__raw_writew(data, (void __iomem *)io_ports->data_addr);
+	}
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		tx4938ide_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		tx4938ide_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		tx4938ide_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		tx4938ide_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		tx4938ide_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		tx4938ide_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		tx4938ide_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		tx4938ide_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		tx4938ide_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		tx4938ide_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		tx4938ide_outb((tf->device & HIHI) | drive->select,
+			       io_ports->device_addr);
+}
+
+static void tx4938ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data;
+
+		/* no endian swap */
+		data = __raw_readw((void __iomem *)io_ports->data_addr);
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	tx4938ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = tx4938ide_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = tx4938ide_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = tx4938ide_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = tx4938ide_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = tx4938ide_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = tx4938ide_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		tx4938ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature =
+				tx4938ide_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = tx4938ide_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = tx4938ide_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = tx4938ide_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = tx4938ide_inb(io_ports->lbah_addr);
+	}
+}
+
+static void tx4938ide_input_data_swap(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	unsigned long port = drive->hwif->io_ports.data_addr;
+	unsigned short *ptr = buf;
+	unsigned int count = (len + 1) / 2;
+
+	while (count--)
+		*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
+	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+}
+
+static void tx4938ide_output_data_swap(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	unsigned long port = drive->hwif->io_ports.data_addr;
+	unsigned short *ptr = buf;
+	unsigned int count = (len + 1) / 2;
+
+	while (count--) {
+		__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
+		ptr++;
+	}
+	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+}
+
+static const struct ide_tp_ops tx4938ide_tp_ops = {
+	.exec_command		= ide_exec_command,
+	.read_status		= ide_read_status,
+	.read_altstatus		= ide_read_altstatus,
+	.read_sff_dma_status	= ide_read_sff_dma_status,
+
+	.set_irq		= ide_set_irq,
+
+	.tf_load		= tx4938ide_tf_load,
+	.tf_read		= tx4938ide_tf_read,
+
+	.input_data		= tx4938ide_input_data_swap,
+	.output_data		= tx4938ide_output_data_swap,
+};
+
+#endif	/* __BIG_ENDIAN */
+
+static const struct ide_port_ops tx4938ide_port_ops = {
+	.set_pio_mode = tx4938ide_set_pio_mode,
+};
+
+static const struct ide_port_info tx4938ide_port_info __initdata = {
+	.port_ops = &tx4938ide_port_ops,
+#ifdef __BIG_ENDIAN
+	.tp_ops = &tx4938ide_tp_ops,
+#endif
+	.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.pio_mask = ATA_PIO5,
+};
+
+static int __init tx4938ide_probe(struct platform_device *pdev)
+{
+	hw_regs_t hw;
+	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_host *host;
+	struct resource *res;
+	struct tx4938ide_platform_info *pdata = pdev->dev.platform_data;
+	int irq, ret, i;
+	unsigned long mapbase;
+	struct ide_port_info d = tx4938ide_port_info;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENODEV;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     res->end - res->start + 1, "tx4938ide"))
+		return -EBUSY;
+	mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
+					      res->end - res->start + 1);
+	if (!mapbase)
+		return -EBUSY;
+
+	memset(&hw, 0, sizeof(hw));
+	if (pdata->ioport_shift) {
+		unsigned long port = mapbase;
+
+		hw.io_ports_array[0] = port;
+#ifdef __BIG_ENDIAN
+		port++;
+#endif
+		for (i = 1; i <= 7; i++)
+			hw.io_ports_array[i] =
+				port + (i << pdata->ioport_shift);
+		hw.io_ports.ctl_addr =
+			port + 0x10000 + (6 << pdata->ioport_shift);
+	} else
+		ide_std_init_ports(&hw, mapbase, mapbase + 0x10006);
+	hw.irq = irq;
+	hw.dev = &pdev->dev;
+
+	pr_info("TX4938 IDE interface (base %#lx, irq %d)\n", mapbase, hw.irq);
+	if (pdata->gbus_clock)
+		tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0);
+	else
+		d.port_ops = NULL;
+	ret = ide_host_add(&d, hws, &host);
+	if (ret)
+		return ret;
+	platform_set_drvdata(pdev, host);
+	return 0;
+}
+
+static int __exit tx4938ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
+
+	ide_host_remove(host);
+	return 0;
+}
+
+static struct platform_driver tx4938ide_driver = {
+	.driver		= {
+		.name	= "tx4938ide",
+		.owner	= THIS_MODULE,
+	},
+	.remove = __exit_p(tx4938ide_remove),
+};
+
+static int __init tx4938ide_init(void)
+{
+	return platform_driver_probe(&tx4938ide_driver, tx4938ide_probe);
+}
+
+static void __exit tx4938ide_exit(void)
+{
+	platform_driver_unregister(&tx4938ide_driver);
+}
+
+module_init(tx4938ide_init);
+module_exit(tx4938ide_exit);
+
+MODULE_DESCRIPTION("TX4938 internal IDE driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tx4938ide");