Commit 9811d1e3 authored by David S. Miller's avatar David S. Miller

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-11-04

This series contains updates to ixgbe and ixgbevf only.

Don does cleanup and configuration for our X553 devices, related to LED,
auto-negotiation, flow control and SFP+ setup and config.  Adds the
(not secret) sauce for B0 hardware for X553 hardware.

Emil provides several fixes, first replaces the driver specific MDIO
defines for the more preferred equivalent kernel ones.  Provides a fix
for auto-negotiaion status, by reading a PHY register twice.  Introduces
ixgbe_link_operations structure to allow X550EM_a to override the
methods for MDIO access while X550EM_x provides methods to use I2C
combined access.

Mark fixes an issue where the driver was crashing when msix_entires
were not there because they were freed by a previous suspend or remove.

Sowmini Varadhan fixes an issue where an incorrect check for IPPROTO_UDP
in ixgbe_atr().  Then makes sure that the network and transport headers
in the paged data are available in the headlen bytes to calculate the
l4_proto.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents b6e41797 eeffceee
......@@ -1027,4 +1027,6 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
struct ixgbe_ring *tx_ring);
u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter);
void ixgbe_store_reta(struct ixgbe_adapter *adapter);
s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
#endif /* _IXGBE_H_ */
......@@ -367,7 +367,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
}
/* Negotiate the fc mode to use */
ixgbe_fc_autoneg(hw);
hw->mac.ops.fc_autoneg(hw);
/* Disable any previous flow control settings */
fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
......@@ -1179,6 +1179,7 @@ static const struct ixgbe_mac_operations mac_ops_82598 = {
.get_link_capabilities = &ixgbe_get_link_capabilities_82598,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
.init_led_link_act = ixgbe_init_led_link_act_generic,
.blink_led_start = &ixgbe_blink_led_start_generic,
.blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
......@@ -1193,6 +1194,7 @@ static const struct ixgbe_mac_operations mac_ops_82598 = {
.set_vfta = &ixgbe_set_vfta_82598,
.fc_enable = &ixgbe_fc_enable_82598,
.setup_fc = ixgbe_setup_fc_generic,
.fc_autoneg = ixgbe_fc_autoneg,
.set_fw_drv_ver = NULL,
.acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
.release_swfw_sync = &ixgbe_release_swfw_sync,
......
......@@ -2204,6 +2204,7 @@ static const struct ixgbe_mac_operations mac_ops_82599 = {
.get_link_capabilities = &ixgbe_get_link_capabilities_82599,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
.init_led_link_act = ixgbe_init_led_link_act_generic,
.blink_led_start = &ixgbe_blink_led_start_generic,
.blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
......@@ -2219,6 +2220,7 @@ static const struct ixgbe_mac_operations mac_ops_82599 = {
.set_vfta = &ixgbe_set_vfta_generic,
.fc_enable = &ixgbe_fc_enable_generic,
.setup_fc = ixgbe_setup_fc_generic,
.fc_autoneg = ixgbe_fc_autoneg,
.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
.init_uta_tables = &ixgbe_init_uta_tables_generic,
.setup_sfp = &ixgbe_setup_sfp_modules_82599,
......
......@@ -298,10 +298,12 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
IXGBE_WRITE_FLUSH(hw);
/* Setup flow control */
/* Setup flow control if method for doing so */
if (hw->mac.ops.setup_fc) {
ret_val = hw->mac.ops.setup_fc(hw);
if (ret_val)
return ret_val;
}
/* Cashe bit indicating need for crosstalk fix */
switch (hw->mac.type) {
......@@ -390,6 +392,9 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
status = hw->mac.ops.start_hw(hw);
}
/* Initialize the LED link active for LED blink support */
hw->mac.ops.init_led_link_act(hw);
return status;
}
......@@ -772,6 +777,49 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
return ixgbe_disable_pcie_master(hw);
}
/**
* ixgbe_init_led_link_act_generic - Store the LED index link/activity.
* @hw: pointer to hardware structure
*
* Store the index for the link active LED. This will be used to support
* blinking the LED.
**/
s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
u32 led_reg, led_mode;
u16 i;
led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
/* Get LED link active from the LEDCTL register */
for (i = 0; i < 4; i++) {
led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
IXGBE_LED_LINK_ACTIVE) {
mac->led_link_act = i;
return 0;
}
}
/* If LEDCTL register does not have the LED link active set, then use
* known MAC defaults.
*/
switch (hw->mac.type) {
case ixgbe_mac_x550em_a:
mac->led_link_act = 0;
break;
case ixgbe_mac_X550EM_x:
mac->led_link_act = 1;
break;
default:
mac->led_link_act = 2;
}
return 0;
}
/**
* ixgbe_led_on_generic - Turns on the software controllable LEDs.
* @hw: pointer to hardware structure
......@@ -2127,7 +2175,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
}
/* Negotiate the fc mode to use */
ixgbe_fc_autoneg(hw);
hw->mac.ops.fc_autoneg(hw);
/* Disable any previous flow control settings */
mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
......@@ -2231,7 +2279,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
* Find the intersection between advertised settings and link partner's
* advertised settings
**/
static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
{
if ((!(adv_reg)) || (!(lp_reg)))
......
......@@ -49,6 +49,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw);
s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
......
......@@ -2225,11 +2225,11 @@ static int ixgbe_set_phys_id(struct net_device *netdev,
return 2;
case ETHTOOL_ID_ON:
hw->mac.ops.led_on(hw, hw->bus.func);
hw->mac.ops.led_on(hw, hw->mac.led_link_act);
break;
case ETHTOOL_ID_OFF:
hw->mac.ops.led_off(hw, hw->bus.func);
hw->mac.ops.led_off(hw, hw->mac.led_link_act);
break;
case ETHTOOL_ID_INACTIVE:
......
......@@ -54,6 +54,7 @@
#include <net/pkt_cls.h>
#include <net/tc_act/tc_gact.h>
#include <net/tc_act/tc_mirred.h>
#include <net/vxlan.h>
#include "ixgbe.h"
#include "ixgbe_common.h"
......@@ -3070,6 +3071,9 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
return;
}
if (!adapter->msix_entries)
return;
for (vector = 0; vector < adapter->num_q_vectors; vector++) {
struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
struct msix_entry *entry = &adapter->msix_entries[vector];
......@@ -5621,7 +5625,8 @@ static void ixgbe_init_dcb(struct ixgbe_adapter *adapter)
* Fields are initialized based on PCI device information and
* OS network device settings (MTU size).
**/
static int ixgbe_sw_init(struct ixgbe_adapter *adapter)
static int ixgbe_sw_init(struct ixgbe_adapter *adapter,
const struct ixgbe_info *ii)
{
struct ixgbe_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
......@@ -5637,6 +5642,9 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter)
hw->subsystem_vendor_id = pdev->subsystem_vendor;
hw->subsystem_device_id = pdev->subsystem_device;
/* get_invariants needs the device IDs */
ii->get_invariants(hw);
/* Set common capability flags and settings */
rss = min_t(int, ixgbe_max_rss_indices(adapter), num_online_cpus());
adapter->ring_feature[RING_F_RSS].limit = rss;
......@@ -7653,11 +7661,17 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
/* snag network header to get L4 type and address */
skb = first->skb;
hdr.network = skb_network_header(skb);
if (unlikely(hdr.network <= skb->data))
return;
if (skb->encapsulation &&
first->protocol == htons(ETH_P_IP) &&
hdr.ipv4->protocol != IPPROTO_UDP) {
hdr.ipv4->protocol == IPPROTO_UDP) {
struct ixgbe_adapter *adapter = q_vector->adapter;
if (unlikely(skb_tail_pointer(skb) < hdr.network +
VXLAN_HEADROOM))
return;
/* verify the port is recognized as VXLAN */
if (adapter->vxlan_port &&
udp_hdr(skb)->dest == adapter->vxlan_port)
......@@ -7668,6 +7682,12 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
hdr.network = skb_inner_network_header(skb);
}
/* Make sure we have at least [minimum IPv4 header + TCP]
* or [IPv6 header] bytes
*/
if (unlikely(skb_tail_pointer(skb) < hdr.network + 40))
return;
/* Currently only IPv4/IPv6 with TCP is supported */
switch (hdr.ipv4->version) {
case IPVERSION:
......@@ -7687,6 +7707,10 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
if (l4_proto != IPPROTO_TCP)
return;
if (unlikely(skb_tail_pointer(skb) < hdr.network +
hlen + sizeof(struct tcphdr)))
return;
th = (struct tcphdr *)(hdr.network + hlen);
/* skip this packet since the socket is closing */
......@@ -9504,6 +9528,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw->mac.ops = *ii->mac_ops;
hw->mac.type = ii->mac;
hw->mvals = ii->mvals;
if (ii->link_ops)
hw->link.ops = *ii->link_ops;
/* EEPROM */
hw->eeprom.ops = *ii->eeprom_ops;
......@@ -9527,10 +9553,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw->phy.mdio.mdio_read = ixgbe_mdio_read;
hw->phy.mdio.mdio_write = ixgbe_mdio_write;
ii->get_invariants(hw);
/* setup the private structure */
err = ixgbe_sw_init(adapter);
err = ixgbe_sw_init(adapter, ii);
if (err)
goto err_sw_init;
......
......@@ -195,12 +195,8 @@ s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 *sff8472_data);
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 eeprom_data);
s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val);
s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 *val);
s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 val);
s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
u16 reg, u16 val);
s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
u16 *val, bool lock);
s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
u16 val, bool lock);
#endif /* _IXGBE_PHY_H_ */
......@@ -874,19 +874,13 @@ struct ixgbe_thermal_sensor_data {
#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB 0x4 /* 1Gb/s */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB 0x6 /* 10Gb/s */
#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG 0x20 /* 10G Control Reg */
#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */
#define IXGBE_MII_AUTONEG_ADVERTISE_REG 0x10 /* 100M Advertisement */
#define IXGBE_MII_10GBASE_T_ADVERTISE 0x1000 /* full duplex, bit:12*/
#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/
#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/
#define IXGBE_MII_2_5GBASE_T_ADVERTISE 0x0400
#define IXGBE_MII_5GBASE_T_ADVERTISE 0x0800
#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */
#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */
#define IXGBE_MII_RESTART 0x200
#define IXGBE_MII_AUTONEG_COMPLETE 0x20
#define IXGBE_MII_AUTONEG_LINK_UP 0x04
#define IXGBE_MII_AUTONEG_REG 0x0
......@@ -1320,30 +1314,20 @@ struct ixgbe_thermal_sensor_data {
/* MDIO definitions */
#define IXGBE_MDIO_ZERO_DEV_TYPE 0x0
#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1
#define IXGBE_MDIO_PCS_DEV_TYPE 0x3
#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4
#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */
#define IXGBE_TWINAX_DEV 1
#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010
#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */
#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT 0xC800 /* AUTO_NEG Vendor Status Reg */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM 0xCC00 /* AUTO_NEG Vendor TX Reg */
#define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */
#define IXGBE_MDIO_AUTO_NEG_VEN_LSC 0x1 /* AUTO_NEG Vendor Tx LSC */
#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */
#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */
#define IXGBE_MDIO_AUTO_NEG_EEE_ADVT 0x3C /* AUTO_NEG EEE Advt Reg */
#define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE 0x0800 /* Set low power mode */
......@@ -1393,8 +1377,10 @@ struct ixgbe_thermal_sensor_data {
#define TN1010_PHY_ID 0x00A19410
#define TNX_FW_REV 0xB
#define X540_PHY_ID 0x01540200
#define X550_PHY_ID 0x01540220
#define X550_PHY_ID2 0x01540223
#define X550_PHY_ID3 0x01540221
#define X557_PHY_ID 0x01540240
#define X557_PHY_ID2 0x01540250
#define QT2022_PHY_ID 0x0043A400
#define ATH_PHY_ID 0x03429050
#define AQ_FW_REV 0x20
......@@ -3352,6 +3338,7 @@ struct ixgbe_mac_operations {
s32 (*led_off)(struct ixgbe_hw *, u32);
s32 (*blink_led_start)(struct ixgbe_hw *, u32);
s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
s32 (*init_led_link_act)(struct ixgbe_hw *);
/* RAR, Multicast, VLAN */
s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
......@@ -3372,6 +3359,7 @@ struct ixgbe_mac_operations {
/* Flow Control */
s32 (*fc_enable)(struct ixgbe_hw *);
s32 (*setup_fc)(struct ixgbe_hw *);
void (*fc_autoneg)(struct ixgbe_hw *);
/* Manageability interface */
s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
......@@ -3410,16 +3398,28 @@ struct ixgbe_phy_operations {
s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *);
s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
s32 (*check_overtemp)(struct ixgbe_hw *);
s32 (*set_phy_power)(struct ixgbe_hw *, bool on);
s32 (*enter_lplu)(struct ixgbe_hw *);
s32 (*handle_lasi)(struct ixgbe_hw *hw);
s32 (*read_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 *value);
s32 (*write_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 value);
s32 (*read_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
u8 *value);
s32 (*write_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
u8 value);
};
struct ixgbe_link_operations {
s32 (*read_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
s32 (*read_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 *val);
s32 (*write_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
s32 (*write_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
u16 val);
};
struct ixgbe_link_info {
struct ixgbe_link_operations ops;
u8 addr;
};
struct ixgbe_eeprom_info {
......@@ -3462,6 +3462,7 @@ struct ixgbe_mac_info {
u8 san_mac_rar_index;
struct ixgbe_thermal_sensor_data thermal_sensor_data;
bool set_lben;
u8 led_link_act;
};
struct ixgbe_phy_info {
......@@ -3523,6 +3524,7 @@ struct ixgbe_hw {
struct ixgbe_addr_filter_info addr_ctrl;
struct ixgbe_fc_info fc;
struct ixgbe_phy_info phy;
struct ixgbe_link_info link;
struct ixgbe_eeprom_info eeprom;
struct ixgbe_bus_info bus;
struct ixgbe_mbx_info mbx;
......@@ -3546,6 +3548,7 @@ struct ixgbe_info {
const struct ixgbe_eeprom_operations *eeprom_ops;
const struct ixgbe_phy_operations *phy_ops;
const struct ixgbe_mbx_operations *mbx_ops;
const struct ixgbe_link_operations *link_ops;
const u32 *mvals;
};
......@@ -3593,17 +3596,35 @@ struct ixgbe_info {
#define IXGBE_FUSES0_REV_MASK (3u << 6)
#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010)
#define IXGBE_KRM_LINK_S1(P) ((P) ? 0x8200 : 0x4200)
#define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C)
#define IXGBE_KRM_AN_CNTL_1(P) ((P) ? 0x822C : 0x422C)
#define IXGBE_KRM_AN_CNTL_8(P) ((P) ? 0x8248 : 0x4248)
#define IXGBE_KRM_SGMII_CTRL(P) ((P) ? 0x82A0 : 0x42A0)
#define IXGBE_KRM_LP_BASE_PAGE_HIGH(P) ((P) ? 0x836C : 0x436C)
#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P) ? 0x8634 : 0x4634)
#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P) ? 0x8638 : 0x4638)
#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P) ? 0x8B00 : 0x4B00)
#define IXGBE_KRM_PMD_DFX_BURNIN(P) ((P) ? 0x8E00 : 0x4E00)
#define IXGBE_KRM_PMD_FLX_MASK_ST20(P) ((P) ? 0x9054 : 0x5054)
#define IXGBE_KRM_TX_COEFF_CTRL_1(P) ((P) ? 0x9520 : 0x5520)
#define IXGBE_KRM_RX_ANA_CTL(P) ((P) ? 0x9A00 : 0x5A00)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA ~(0x3 << 20)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR BIT(20)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_LR (0x2 << 20)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN BIT(25)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN BIT(26)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN BIT(27)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10M ~(0x7 << 28)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_100M BIT(28)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G (0x2 << 28)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G (0x3 << 28)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN (0x4 << 28)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_2_5G (0x7 << 28)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK (0x7 << 28)
#define IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART BIT(31)
#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B BIT(9)
#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS BIT(11)
......@@ -3618,6 +3639,7 @@ struct ixgbe_info {
#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR BIT(18)
#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX BIT(24)
#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR BIT(26)
#define IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE BIT(28)
#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE BIT(29)
#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART BIT(31)
......@@ -3627,6 +3649,8 @@ struct ixgbe_info {
#define IXGBE_KRM_AN_CNTL_8_LINEAR BIT(0)
#define IXGBE_KRM_AN_CNTL_8_LIMITING BIT(1)
#define IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE BIT(10)
#define IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE BIT(11)
#define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D BIT(12)
#define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D BIT(19)
......
......@@ -851,6 +851,7 @@ static const struct ixgbe_mac_operations mac_ops_X540 = {
.get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
.init_led_link_act = ixgbe_init_led_link_act_generic,
.blink_led_start = &ixgbe_blink_led_start_X540,
.blink_led_stop = &ixgbe_blink_led_stop_X540,
.set_rar = &ixgbe_set_rar_generic,
......@@ -866,6 +867,7 @@ static const struct ixgbe_mac_operations mac_ops_X540 = {
.set_vfta = &ixgbe_set_vfta_generic,
.fc_enable = &ixgbe_fc_enable_generic,
.setup_fc = ixgbe_setup_fc_generic,
.fc_autoneg = ixgbe_fc_autoneg,
.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
.init_uta_tables = &ixgbe_init_uta_tables_generic,
.setup_sfp = NULL,
......
......@@ -1498,6 +1498,9 @@ static void ixgbevf_free_irq(struct ixgbevf_adapter *adapter)
{
int i, q_vectors;
if (!adapter->msix_entries)
return;
q_vectors = adapter->num_msix_vectors;
i = q_vectors - 1;
......@@ -2552,6 +2555,9 @@ static void ixgbevf_free_q_vectors(struct ixgbevf_adapter *adapter)
**/
static void ixgbevf_reset_interrupt_capability(struct ixgbevf_adapter *adapter)
{
if (!adapter->msix_entries)
return;
pci_disable_msix(adapter->pdev);
kfree(adapter->msix_entries);
adapter->msix_entries = NULL;
......@@ -3794,11 +3800,10 @@ static int ixgbevf_suspend(struct pci_dev *pdev, pm_message_t state)
ixgbevf_free_irq(adapter);
ixgbevf_free_all_tx_resources(adapter);
ixgbevf_free_all_rx_resources(adapter);
ixgbevf_clear_interrupt_scheme(adapter);
rtnl_unlock();
}
ixgbevf_clear_interrupt_scheme(adapter);
#ifdef CONFIG_PM
retval = pci_save_state(pdev);
if (retval)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment