Merge groveronline.com:/root/bk/linux-2.5

into groveronline.com:/root/bk/linux-acpi

Documentation/kernel-parameters.txt

@@ -85,7 +85,13 @@ running once the system is up.
 			See also Documentation/scsi/ncr53c7xx.txt.
 
 	acpi=		[HW,ACPI] Advanced Configuration and Power Interface 
-			Format: off[,<...>]
+			Format: off
+			off -- disables both ACPI table parsing and interpreter init
+			See also Documentation/pm.txt.
+
+	acpismp=	[IA-32] Early setup parse and use ACPI SMP table.
+			Format: force
+			force -- force use of ACPI table parsing and interpreter init
 			See also Documentation/pm.txt.
  
 	ad1816=		[HW,OSS]

arch/i386/kernel/acpi/boot.c

@@ -310,11 +310,12 @@ acpi_boot_init (void)
 
 	result = acpi_blacklisted();
 	if (result) {
+		printk(KERN_WARNING PREFIX "BIOS listed in blacklist, disabling ACPI support\n");
 		acpi_disabled = 1;
 		return result;
 	}
 	else
-		printk(KERN_NOTICE PREFIX "BIOS passes blacklist\n");
+		printk(KERN_NOTICE PREFIX "BIOS not listed in blacklist\n");
 
 #ifdef CONFIG_X86_LOCAL_APIC
 

arch/i386/kernel/io_apic.c

@@ -2328,7 +2328,7 @@ int __init io_apic_get_redir_entries (int ioapic)
 }
 
 
-int io_apic_set_pci_routing (int ioapic, int pin, int irq)
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
 {
 	struct IO_APIC_route_entry entry;
 	unsigned long flags;
@@ -2350,19 +2350,23 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq)
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.dest_mode = INT_DEST_MODE;
 	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.mask = 1;					 /* Disabled (masked) */
-	entry.trigger = 1;				   /* Level sensitive */
-	entry.polarity = 1;					/* Low active */
+	entry.trigger = edge_level;
+	entry.polarity = active_high_low;
+	entry.mask  = 1;
 
 	add_pin_to_irq(irq, ioapic, pin);
 
 	entry.vector = assign_irq_vector(irq);
 
 	printk(KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
-		"IRQ %d)\n", ioapic, 
-		mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq);
+		"IRQ %d Mode:%i Active:%i)\n", ioapic, 
+		mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, edge_level, active_high_low);
 
+	if (edge_level) {
 	irq_desc[irq].handler = &ioapic_level_irq_type;
+	} else {
+		irq_desc[irq].handler = &ioapic_edge_irq_type;
+	}
 
 	set_intr_gate(entry.vector, interrupt[irq]);
 

arch/i386/kernel/mpparse.c

@@ -1065,7 +1065,7 @@ void __init mp_config_ioapic_for_sci(int irq)
 
 	ioapic_pin = irq - mp_ioapic_routing[ioapic].irq_start;
 
-	io_apic_set_pci_routing(ioapic, ioapic_pin, irq);
+	io_apic_set_pci_routing(ioapic, ioapic_pin, irq, 1, 1); // Active low, level triggered
 }
 
 #endif /*CONFIG_ACPI_HT_ONLY*/
@@ -1080,6 +1080,8 @@ void __init mp_parse_prt (void)
 	int			ioapic_pin = 0;
 	int			irq = 0;
 	int			idx, bit = 0;
+	int			edge_level = 0;
+	int			active_high_low = 0;
 
 	/*
 	 * Parsing through the PCI Interrupt Routing Table (PRT) and program
@@ -1090,12 +1092,16 @@ void __init mp_parse_prt (void)
 
 		/* Need to get irq for dynamic entry */
 		if (entry->link.handle) {
-			irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index);
+			irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, &edge_level, &active_high_low);
 			if (!irq)
 				continue;
 		}
-		else
+		else {
+			/* Hardwired IRQ. Assume PCI standard settings */
 			irq = entry->link.index;
+			edge_level = 1;
+			active_high_low = 1;
+		}
 
 		/* Don't set up the ACPI SCI because it's already set up */
 		if (acpi_fadt.sci_int == irq)
@@ -1130,7 +1136,7 @@ void __init mp_parse_prt (void)
 
 		mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
 
-		if (!io_apic_set_pci_routing(ioapic, ioapic_pin, irq))
+		if (!io_apic_set_pci_routing(ioapic, ioapic_pin, irq, edge_level, active_high_low))
 			entry->irq = irq;
 
 		printk(KERN_DEBUG "%02x:%02x:%02x[%c] -> %d-%d -> IRQ %d\n",
@@ -1139,8 +1145,6 @@ void __init mp_parse_prt (void)
 			mp_ioapic_routing[ioapic].apic_id, ioapic_pin, 
 			entry->irq);
 	}
-	
-	return;
 }
 
 #endif /*CONFIG_ACPI_PCI*/

arch/x86_64/kernel/acpi/boot.c

@@ -313,10 +313,11 @@ acpi_boot_init (void)
 
 	result = acpi_blacklisted();
 	if (result) {
+		printk(KERN_WARNING PREFIX "BIOS listed in blacklist, disabling ACPI support\n");
 		acpi_disabled = 1;
 		return result;
 	} else
-               printk(KERN_NOTICE PREFIX "BIOS passes blacklist\n");
+               printk(KERN_NOTICE PREFIX "BIOS not listed in blacklist\n");
 
 
 	extern int disable_apic;

drivers/acpi/Kconfig

@@ -133,7 +133,7 @@ config ACPI_THERMAL
 
 config ACPI_NUMA
 	bool "NUMA support" if NUMA && (IA64 && !IA64_HP_SIM || X86 && ACPI && !ACPI_HT_ONLY && !X86_64)
-	default y if IA64 && IA64_SGI_SN
+	default y if IA64_GENERIC || IA64_SGI_SN2
 
 config ACPI_ASUS
         tristate "ASUS/Medion Laptop Extras"

drivers/acpi/pci_irq.c

@@ -24,6 +24,8 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
+#include <linux/config.h>
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -36,6 +38,9 @@
 #ifdef CONFIG_X86_IO_APIC
 #include <asm/mpspec.h>
 #endif
+#ifdef CONFIG_IOSAPIC
+# include <asm/iosapic.h>
+#endif
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -249,7 +254,7 @@ acpi_pci_irq_lookup (struct pci_bus *bus, int device, int pin)
 	}
 
 	if (!entry->irq && entry->link.handle) {
-		entry->irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index);
+		entry->irq = acpi_pci_link_get_irq(entry->link.handle, entry->link.index, NULL, NULL);
 		if (!entry->irq) {
 			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
 			return_VALUE(0);
@@ -393,7 +398,9 @@ acpi_pci_irq_init (void)
 	}
 
 	/* Make sure all link devices have a valid IRQ. */
-	acpi_pci_link_check();
+	if (acpi_pci_link_check()) {
+		return_VALUE(-ENODEV);
+	}
 
 #ifdef CONFIG_X86_IO_APIC
 	/* Program IOAPICs using data from PRT entries. */

drivers/acpi/pci_link.c

@@ -69,6 +69,9 @@ static struct acpi_driver acpi_pci_link_driver = {
 
 struct acpi_pci_link_irq {
 	u8			active;			/* Current IRQ */
+	u8			edge_level;		/* All IRQs */
+	u8			active_high_low;	/* All IRQs */
+	u8			setonboot;
 	u8			possible_count;
 	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE];
 };
@@ -118,6 +121,8 @@ acpi_pci_link_check_possible (
 			link->irq.possible[i] = p->interrupts[i];
 			link->irq.possible_count++;
 		}
+		link->irq.edge_level = p->edge_level;
+		link->irq.active_high_low = p->active_high_low;
 		break;
 	}
 	case ACPI_RSTYPE_EXT_IRQ:
@@ -136,6 +141,8 @@ acpi_pci_link_check_possible (
 			link->irq.possible[i] = p->interrupts[i];
 			link->irq.possible_count++;
 		}
+		link->irq.edge_level = p->edge_level;
+		link->irq.active_high_low = p->active_high_low;
 		break;
 	}
 	default:
@@ -264,7 +271,6 @@ acpi_pci_link_get_current (
 	 * IRQ a boot-enabled Link device is set to is the correct one.
 	 * (Required to support systems such as the Toshiba 5005-S504.)
 	 */
-
 	link->irq.active = irq;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link at IRQ %d \n", link->irq.active));
@@ -294,6 +300,8 @@ acpi_pci_link_set (
 	if (!link || !irq)
 		return_VALUE(-EINVAL);
 
+	/* We don't check irqs the first time around */
+	if (link->irq.setonboot) {
 		/* See if we're already at the target IRQ. */
 		if (irq == link->irq.active)
 			return_VALUE(0);
@@ -307,16 +315,18 @@ acpi_pci_link_set (
 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Target IRQ %d invalid\n", irq));
 			return_VALUE(-EINVAL);
 		}
+	}
 
 	memset(&resource, 0, sizeof(resource));
 
-	/* NOTE: PCI interrupts are always level / active_low / shared. */
+	/* NOTE: PCI interrupts are always level / active_low / shared. But not all
+	   interrupts > 15 are PCI interrupts. Rely on the ACPI IRQ definition for 
+	   parameters */
 	if (irq <= 15) {
 		resource.res.id = ACPI_RSTYPE_IRQ;
 		resource.res.length = sizeof(struct acpi_resource);
-		resource.res.data.irq.edge_level = ACPI_LEVEL_SENSITIVE;
-		resource.res.data.irq.active_high_low = ACPI_ACTIVE_LOW;
-		resource.res.data.irq.shared_exclusive = ACPI_SHARED;
+		resource.res.data.irq.edge_level = link->irq.edge_level;
+		resource.res.data.irq.active_high_low = link->irq.active_high_low;
 		resource.res.data.irq.number_of_interrupts = 1;
 		resource.res.data.irq.interrupts[0] = irq;
 	}
@@ -324,15 +334,15 @@ acpi_pci_link_set (
 		resource.res.id = ACPI_RSTYPE_EXT_IRQ;
 		resource.res.length = sizeof(struct acpi_resource);
 		resource.res.data.extended_irq.producer_consumer = ACPI_CONSUMER;
-		resource.res.data.extended_irq.edge_level = ACPI_LEVEL_SENSITIVE;
-		resource.res.data.extended_irq.active_high_low = ACPI_ACTIVE_LOW;
-		resource.res.data.extended_irq.shared_exclusive = ACPI_SHARED;
+		resource.res.data.extended_irq.edge_level = link->irq.edge_level;
+		resource.res.data.extended_irq.active_high_low = link->irq.active_high_low;
 		resource.res.data.extended_irq.number_of_interrupts = 1;
 		resource.res.data.extended_irq.interrupts[0] = irq;
 		/* ignore resource_source, it's optional */
 	}
 	resource.end.id = ACPI_RSTYPE_END_TAG;
 
+	/* Attempt to set the resource */
 	status = acpi_set_current_resources(link->handle, &buffer);
 	if (ACPI_FAILURE(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SRS\n"));
@@ -355,11 +365,13 @@ acpi_pci_link_set (
 	if (result) {
 		return_VALUE(result);
 	}
+   
 	if (link->irq.active != irq) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, 
 			"Attempt to enable at IRQ %d resulted in IRQ %d\n", 
 			irq, link->irq.active));
 		link->irq.active = 0;
+		acpi_ut_evaluate_object (link->handle, "_DIS", 0, NULL);	   
 		return_VALUE(-ENODEV);
 	}
 
@@ -407,7 +419,7 @@ acpi_pci_link_check (void)
 	ACPI_FUNCTION_TRACE("acpi_pci_link_check");
 
 	/*
-	 * Pass #1: Update penalties to facilitate IRQ balancing.
+	 * Update penalties to facilitate IRQ balancing.
 	 */
 	list_for_each(node, &acpi_link.entries) {
 
@@ -428,23 +440,23 @@ acpi_pci_link_check (void)
 		}
 	}
 
-	/*
-	 * Pass #2: Enable boot-disabled Links at 'best' IRQ.
-	 */
-	list_for_each(node, &acpi_link.entries) {
-		int		irq = 0;
-		int		i = 0;
+	return_VALUE(0);
+}
 
-		link = list_entry(node, struct acpi_pci_link, node);
-		if (!link || !link->irq.possible_count) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
-			continue;
-		}
+static int acpi_pci_link_allocate(struct acpi_pci_link* link) {
+	int irq;
+	int i;
 
-		if (link->irq.active)
-			continue;
+	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");
 
+	if (link->irq.setonboot)
+		return_VALUE(0);
+
+	if (link->irq.active) {
+		irq = link->irq.active;
+	} else {
 		irq = link->irq.possible[0];
+	}
 
 		/* 
 		 * Select the best IRQ.  This is done in reverse to promote 
@@ -455,16 +467,20 @@ acpi_pci_link_check (void)
 				irq = link->irq.possible[i];
 		}
 
-		/* Enable the link device at this IRQ. */
-		acpi_pci_link_set(link, irq);
-
+	/* Attempt to enable the link device at this IRQ. */
+	if (acpi_pci_link_set(link, irq)) {
+		printk(PREFIX "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off\n",
+			acpi_device_name(link->device),
+			acpi_device_bid(link->device));
+		return_VALUE(-ENODEV);
+	} else {
 		acpi_irq_penalty[link->irq.active] += 100;
-
 		printk(PREFIX "%s [%s] enabled at IRQ %d\n", 
 			acpi_device_name(link->device),
 			acpi_device_bid(link->device), link->irq.active);
 	}
 
+	link->irq.setonboot = 1;
 	return_VALUE(0);
 }
 
@@ -472,7 +488,9 @@ acpi_pci_link_check (void)
 int
 acpi_pci_link_get_irq (
 	acpi_handle		handle,
-	int			index)
+	int			index,
+	int*			edge_level,
+	int*			active_high_low)
 {
 	int                     result = 0;
 	struct acpi_device	*device = NULL;
@@ -498,11 +516,17 @@ acpi_pci_link_get_irq (
 		return_VALUE(0);
 	}
 
+	if (acpi_pci_link_allocate(link)) {
+		return -ENODEV;
+	}
+	   
 	if (!link->irq.active) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link disabled\n"));
 		return_VALUE(0);
 	}
 
+	if (edge_level) *edge_level = link->irq.edge_level;
+	if (active_high_low) *active_high_low = link->irq.active_high_low;
 	return_VALUE(link->irq.active);
 }
 

drivers/acpi/processor.c

@@ -1781,7 +1781,6 @@ acpi_processor_remove (
 	if (ACPI_FAILURE(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, 
 			"Error removing notify handler\n"));
-		return_VALUE(-ENODEV);
 	}
 
 	acpi_processor_remove_fs(device);

drivers/acpi/toshiba_acpi.c

@@ -33,7 +33,7 @@
  *
  */
 
-#define TOSHIBA_ACPI_VERSION	"0.15"
+#define TOSHIBA_ACPI_VERSION	"0.16"
 #define PROC_INTERFACE_VERSION	1
 
 #include <linux/kernel.h>
@@ -108,6 +108,7 @@ snscanf(const char* str, int n, const char* format, ...)
 	int result;
 	char* str2 = kmalloc(n + 1, GFP_KERNEL);
 	if (str2 == 0) return 0;
+	/* NOTE: don't even _think_ about replacing this with strlcpy */
 	strncpy(str2, str, n);
 	str2[n] = 0;
 	va_start(args, format);

include/acpi/acpi_drivers.h

@@ -60,7 +60,7 @@ void acpi_pci_get_translations (struct acpi_pci_id* id, u64* mem_tra, u64* io_tr
 /* ACPI PCI Interrupt Link (pci_link.c) */
 
 int acpi_pci_link_check (void);
-int acpi_pci_link_get_irq (acpi_handle handle, int index);
+int acpi_pci_link_get_irq (acpi_handle handle, int index, int* edge_level, int* active_high_low);
 
 /* ACPI PCI Interrupt Routing (pci_irq.c) */
 

include/asm-i386/io_apic.h

@@ -170,7 +170,7 @@ extern int skip_ioapic_setup;
 extern int io_apic_get_unique_id (int ioapic, int apic_id);
 extern int io_apic_get_version (int ioapic);
 extern int io_apic_get_redir_entries (int ioapic);
-extern int io_apic_set_pci_routing (int ioapic, int pin, int irq);
+extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low);
 #endif /*CONFIG_ACPI_BOOT*/
 
 #else  /* !CONFIG_X86_IO_APIC */