Skip to content

L
linux
Commit 99ae9953 authored by Ben Dooks's avatar Ben Dooks
Browse files
Options

[ARM] S3C24XX: Merge devel-gpio 

Merge branch 'devel-gpio' into for-rmk-devel
parents bcb8a0d6 7a05a2cb
Hide whitespace changes
Inline Side-by-side
Showing with 409 additions and 627 deletions
Documentation/arm/Samsung-S3C24XX/GPIO.txt
View file @ 99ae9953
......@@ -51,7 +51,7 @@ PIN Numbers
-----------
Each pin has an unique number associated with it in regs-gpio.h,
eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
......@@ -65,11 +65,11 @@ Configuring a pin
Eg:
s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
which would turn GPA0 into the lowest Address line A0, and set
GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
Reading the current configuration
......
arch/arm/mach-s3c2400/gpio.c
View file @ 99ae9953
......@@ -33,10 +33,10 @@
int s3c2400_gpio_getirq(unsigned int pin)
{
if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
return -1; /* not valid interrupts */
if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
return -EINVAL; /* not valid interrupts */
return (pin - S3C2410_GPE0) + IRQ_EINT0;
return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
}
EXPORT_SYMBOL(s3c2400_gpio_getirq);
arch/arm/mach-s3c2410/gpio.c
View file @ 99ae9953
......@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned long flags;
unsigned long val;
if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
return -1;
if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
return -EINVAL;
config &= 0xff;
pin -= S3C2410_GPG8;
pin -= S3C2410_GPG(8);
reg += pin & ~3;
local_irq_save(flags);
......
arch/arm/mach-s3c2410/h1940-bluetooth.c
View file @ 99ae9953
......@@ -16,6 +16,8 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/h1940-latch.h>
......@@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
/* Reset the chip */
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH1, 1);
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH1, 0);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
state = 1;
}
......@@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
led_trigger_event(bt_led_trigger, 0);
#endif
s3c2410_gpio_setpin(S3C2410_GPH1, 1);
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH1, 0);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
......@@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
static int __init h1940bt_probe(struct platform_device *pdev)
{
/* Configures BT serial port GPIOs */
s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
s3c2410_gpio_pullup(S3C2410_GPH0, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
s3c2410_gpio_pullup(S3C2410_GPH1, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
s3c2410_gpio_pullup(S3C2410_GPH2, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
s3c2410_gpio_pullup(S3C2410_GPH3, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
#ifdef CONFIG_LEDS_H1940
led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
......
arch/arm/mach-s3c2410/include/mach/gpio-core.h
View file @ 99ae9953
......@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
{
struct s3c_gpio_chip *chip;
if (pin > S3C2410_GPG10)
if (pin > S3C2410_GPG(10))
return NULL;
chip = &s3c24xx_gpios[pin/32];
......
arch/arm/mach-s3c2410/include/mach/gpio-fns.h 0 → 100644
View file @ 99ae9953
/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
*
* Copyright (c) 2003,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - hardware
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* These functions are in the to-be-removed category and it is strongly
* encouraged not to use these in new code. They will be marked deprecated
* very soon.
*
* Most of the functionality can be either replaced by the gpiocfg calls
* for the s3c platform or by the generic GPIOlib API.
*/
/* external functions for GPIO support
*
* These allow various different clients to access the same GPIO
* registers without conflicting. If your driver only owns the entire
* GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
*/
/* s3c2410_gpio_cfgpin
*
* set the configuration of the given pin to the value passed.
*
* eg:
* s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
* s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
*/
extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
/* s3c2410_gpio_getirq
*
* turn the given pin number into the corresponding IRQ number
*
* returns:
* < 0 = no interrupt for this pin
* >=0 = interrupt number for the pin
*/
extern int s3c2410_gpio_getirq(unsigned int pin);
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
#endif /* CONFIG_CPU_S3C2400 */
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
*
* on = 0 => disable filtering
* 1 => enable filtering
*
* config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
* width of filter (0 through 63)
*
*
*/
extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned int config);
/* s3c2410_gpio_pullup
*
* configure the pull-up control on the given pin
*
* to = 1 => disable the pull-up
* 0 => enable the pull-up
*
* eg;
*
* s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
* s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
*/
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
/* s3c2410_gpio_getpull
*
* Read the state of the pull-up on a given pin
*
* return:
* < 0 => error code
* 0 => enabled
* 1 => disabled
*/
extern int s3c2410_gpio_getpull(unsigned int pin);
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
View file @ 99ae9953
......@@ -11,6 +11,9 @@
* published by the Free Software Foundation.
*/
#ifndef __MACH_GPIONRS_H
#define __MACH_GPIONRS_H
#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
#define S3C2410_GPIO_BANKA (32*0)
......@@ -21,3 +24,70 @@
#define S3C2410_GPIO_BANKF (32*5)
#define S3C2410_GPIO_BANKG (32*6)
#define S3C2410_GPIO_BANKH (32*7)
/* GPIO bank sizes */
#define S3C2410_GPIO_A_NR (32)
#define S3C2410_GPIO_B_NR (32)
#define S3C2410_GPIO_C_NR (32)
#define S3C2410_GPIO_D_NR (32)
#define S3C2410_GPIO_E_NR (32)
#define S3C2410_GPIO_F_NR (32)
#define S3C2410_GPIO_G_NR (32)
#define S3C2410_GPIO_H_NR (32)
#if CONFIG_S3C_GPIO_SPACE != 0
#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
#endif
#define S3C2410_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
#ifndef __ASSEMBLY__
enum s3c_gpio_number {
S3C2410_GPIO_A_START = 0,
S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
};
#endif /* __ASSEMBLY__ */
/* S3C2410 GPIO number definitions. */
#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
/* compatibility until drivers can be modified */
#define S3C2410_GPA0 S3C2410_GPA(0)
#define S3C2410_GPA1 S3C2410_GPA(1)
#define S3C2410_GPA3 S3C2410_GPA(3)
#define S3C2410_GPA7 S3C2410_GPA(7)
#define S3C2410_GPE0 S3C2410_GPE(0)
#define S3C2410_GPE1 S3C2410_GPE(1)
#define S3C2410_GPE2 S3C2410_GPE(2)
#define S3C2410_GPE3 S3C2410_GPE(3)
#define S3C2410_GPE4 S3C2410_GPE(4)
#define S3C2410_GPE5 S3C2410_GPE(5)
#define S3C2410_GPE6 S3C2410_GPE(6)
#define S3C2410_GPE7 S3C2410_GPE(7)
#define S3C2410_GPE8 S3C2410_GPE(8)
#define S3C2410_GPE9 S3C2410_GPE(9)
#define S3C2410_GPE10 S3C2410_GPE(10)
#define S3C2410_GPH10 S3C2410_GPH(10)
#endif /* __MACH_GPIONRS_H */
arch/arm/mach-s3c2410/include/mach/gpio.h
View file @ 99ae9953
......@@ -24,5 +24,6 @@
#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
arch/arm/mach-s3c2410/include/mach/hardware.h
View file @ 99ae9953
......@@ -15,101 +15,6 @@
#ifndef __ASSEMBLY__
/* external functions for GPIO support
*
* These allow various different clients to access the same GPIO
* registers without conflicting. If your driver only owns the entire
* GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
*/
/* s3c2410_gpio_cfgpin
*
* set the configuration of the given pin to the value passed.
*
* eg:
* s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
* s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
*/
extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
/* s3c2410_gpio_getirq
*
* turn the given pin number into the corresponding IRQ number
*
* returns:
* < 0 = no interrupt for this pin
* >=0 = interrupt number for the pin
*/
extern int s3c2410_gpio_getirq(unsigned int pin);
/* s3c2410_gpio_irq2pin
*
* turn the given irq number into the corresponding GPIO number
*
* returns:
* < 0 = no pin
* >=0 = gpio pin number
*/
extern int s3c2410_gpio_irq2pin(unsigned int irq);
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
#endif /* CONFIG_CPU_S3C2400 */
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
*
* on = 0 => disable filtering
* 1 => enable filtering
*
* config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
* width of filter (0 through 63)
*
*
*/
extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned int config);
/* s3c2410_gpio_pullup
*
* configure the pull-up control on the given pin
*
* to = 1 => disable the pull-up
* 0 => enable the pull-up
*
* eg;
*
* s3c2410_gpio_pullup(S3C2410_GPB0, 0);
* s3c2410_gpio_pullup(S3C2410_GPE8, 0);
*/
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
/* s3c2410_gpio_getpull
*
* Read the state of the pull-up on a given pin
*
* return:
* < 0 => error code
* 0 => enabled
* 1 => disabled
*/
extern int s3c2410_gpio_getpull(unsigned int pin);
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
#ifdef CONFIG_CPU_S3C2440
......
arch/arm/mach-s3c2410/include/mach/regs-gpio.h
View file @ 99ae9953
......@@ -69,104 +69,58 @@
#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
#define S3C2410_GPA0_OUT (0<<0)
#define S3C2410_GPA0_ADDR0 (1<<0)
#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
#define S3C2410_GPA1_OUT (0<<1)
#define S3C2410_GPA1_ADDR16 (1<<1)
#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
#define S3C2410_GPA2_OUT (0<<2)
#define S3C2410_GPA2_ADDR17 (1<<2)
#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
#define S3C2410_GPA3_OUT (0<<3)
#define S3C2410_GPA3_ADDR18 (1<<3)
#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
#define S3C2410_GPA4_OUT (0<<4)
#define S3C2410_GPA4_ADDR19 (1<<4)
#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
#define S3C2410_GPA5_OUT (0<<5)
#define S3C2410_GPA5_ADDR20 (1<<5)
#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
#define S3C2410_GPA6_OUT (0<<6)
#define S3C2410_GPA6_ADDR21 (1<<6)
#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
#define S3C2410_GPA7_OUT (0<<7)
#define S3C2410_GPA7_ADDR22 (1<<7)
#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
#define S3C2410_GPA8_OUT (0<<8)
#define S3C2410_GPA8_ADDR23 (1<<8)
#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
#define S3C2410_GPA9_OUT (0<<9)
#define S3C2410_GPA9_ADDR24 (1<<9)
#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
#define S3C2410_GPA10_OUT (0<<10)
#define S3C2410_GPA10_ADDR25 (1<<10)
#define S3C2400_GPA10_SCKE (1<<10)
#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
#define S3C2410_GPA11_OUT (0<<11)
#define S3C2410_GPA11_ADDR26 (1<<11)
#define S3C2400_GPA11_nCAS0 (1<<11)
#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
#define S3C2410_GPA12_OUT (0<<12)
#define S3C2410_GPA12_nGCS1 (1<<12)
#define S3C2400_GPA12_nCAS1 (1<<12)
#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
#define S3C2410_GPA13_OUT (0<<13)
#define S3C2410_GPA13_nGCS2 (1<<13)
#define S3C2400_GPA13_nGCS1 (1<<13)
#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
#define S3C2410_GPA14_OUT (0<<14)
#define S3C2410_GPA14_nGCS3 (1<<14)
#define S3C2400_GPA14_nGCS2 (1<<14)
#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
#define S3C2410_GPA15_OUT (0<<15)
#define S3C2410_GPA15_nGCS4 (1<<15)
#define S3C2400_GPA15_nGCS3 (1<<15)
#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
#define S3C2410_GPA16_OUT (0<<16)
#define S3C2410_GPA16_nGCS5 (1<<16)
#define S3C2400_GPA16_nGCS4 (1<<16)
#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
#define S3C2410_GPA17_OUT (0<<17)
#define S3C2410_GPA17_CLE (1<<17)
#define S3C2400_GPA17_nGCS5 (1<<17)
#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
#define S3C2410_GPA18_OUT (0<<18)
#define S3C2410_GPA18_ALE (1<<18)
#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
#define S3C2410_GPA19_OUT (0<<19)
#define S3C2410_GPA19_nFWE (1<<19)
#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
#define S3C2410_GPA20_OUT (0<<20)
#define S3C2410_GPA20_nFRE (1<<20)
#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
#define S3C2410_GPA21_OUT (0<<21)
#define S3C2410_GPA21_nRSTOUT (1<<21)
#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
#define S3C2410_GPA22_OUT (0<<22)
#define S3C2410_GPA22_nFCE (1<<22)
/* 0x08 and 0x0c are reserved on S3C2410 */
......@@ -194,107 +148,69 @@
/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
#define S3C2410_GPB0_INP (0x00 << 0)
#define S3C2410_GPB0_OUTP (0x01 << 0)
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
#define S3C2400_GPB0_DATA16 (0x02 << 0)
#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
#define S3C2410_GPB1_INP (0x00 << 2)
#define S3C2410_GPB1_OUTP (0x01 << 2)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
#define S3C2400_GPB1_DATA17 (0x02 << 2)
#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
#define S3C2410_GPB2_INP (0x00 << 4)
#define S3C2410_GPB2_OUTP (0x01 << 4)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
#define S3C2400_GPB2_DATA18 (0x02 << 4)
#define S3C2400_GPB2_TCLK1 (0x03 << 4)
#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
#define S3C2410_GPB3_INP (0x00 << 6)
#define S3C2410_GPB3_OUTP (0x01 << 6)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
#define S3C2400_GPB3_DATA19 (0x02 << 6)
#define S3C2400_GPB3_TXD1 (0x03 << 6)
#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
#define S3C2410_GPB4_INP (0x00 << 8)
#define S3C2410_GPB4_OUTP (0x01 << 8)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
#define S3C2400_GPB4_RXD1 (0x03 << 8)
#define S3C2400_GPB4_MASK (0x03 << 8)
#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
#define S3C2410_GPB5_INP (0x00 << 10)
#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
#define S3C2410_GPB6_INP (0x00 << 12)
#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
#define S3C2410_GPB7_INP (0x00 << 14)
#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
#define S3C2410_GPB8_INP (0x00 << 16)
#define S3C2410_GPB8_OUTP (0x01 << 16)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
#define S3C2400_GPB8_DATA24 (0x02 << 16)
#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
#define S3C2410_GPB9_INP (0x00 << 18)
#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
#define S3C2410_GPB10_INP (0x00 << 20)
#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
#define S3C2400_GPB11_INP (0x00 << 22)
#define S3C2400_GPB11_OUTP (0x01 << 22)
#define S3C2400_GPB11_DATA27 (0x02 << 22)
#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
#define S3C2400_GPB12_INP (0x00 << 24)
#define S3C2400_GPB12_OUTP (0x01 << 24)
#define S3C2400_GPB12_DATA28 (0x02 << 24)
#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
#define S3C2400_GPB13_INP (0x00 << 26)
#define S3C2400_GPB13_OUTP (0x01 << 26)
#define S3C2400_GPB13_DATA29 (0x02 << 26)
#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
#define S3C2400_GPB14_INP (0x00 << 28)
#define S3C2400_GPB14_OUTP (0x01 << 28)
#define S3C2400_GPB14_DATA30 (0x02 << 28)
#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
#define S3C2400_GPB15_INP (0x00 << 30)
#define S3C2400_GPB15_OUTP (0x01 << 30)
#define S3C2400_GPB15_DATA31 (0x02 << 30)
......@@ -315,99 +231,51 @@
#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
#define S3C2410_GPC0_INP (0x00 << 0)
#define S3C2410_GPC0_OUTP (0x01 << 0)
#define S3C2410_GPC0_LEND (0x02 << 0)
#define S3C2400_GPC0_VD0 (0x02 << 0)
#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
#define S3C2410_GPC1_INP (0x00 << 2)
#define S3C2410_GPC1_OUTP (0x01 << 2)
#define S3C2410_GPC1_VCLK (0x02 << 2)
#define S3C2400_GPC1_VD1 (0x02 << 2)
#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
#define S3C2410_GPC2_INP (0x00 << 4)
#define S3C2410_GPC2_OUTP (0x01 << 4)
#define S3C2410_GPC2_VLINE (0x02 << 4)
#define S3C2400_GPC2_VD2 (0x02 << 4)
#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
#define S3C2410_GPC3_INP (0x00 << 6)
#define S3C2410_GPC3_OUTP (0x01 << 6)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
#define S3C2400_GPC3_VD3 (0x02 << 6)
#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
#define S3C2410_GPC4_INP (0x00 << 8)
#define S3C2410_GPC4_OUTP (0x01 << 8)
#define S3C2410_GPC4_VM (0x02 << 8)
#define S3C2400_GPC4_VD4 (0x02 << 8)
#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
#define S3C2410_GPC5_INP (0x00 << 10)
#define S3C2410_GPC5_OUTP (0x01 << 10)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
#define S3C2400_GPC5_VD5 (0x02 << 10)
#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
#define S3C2410_GPC6_INP (0x00 << 12)
#define S3C2410_GPC6_OUTP (0x01 << 12)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
#define S3C2400_GPC6_VD6 (0x02 << 12)
#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
#define S3C2410_GPC7_INP (0x00 << 14)
#define S3C2410_GPC7_OUTP (0x01 << 14)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
#define S3C2400_GPC7_VD7 (0x02 << 14)
#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
#define S3C2410_GPC8_INP (0x00 << 16)
#define S3C2410_GPC8_OUTP (0x01 << 16)
#define S3C2410_GPC8_VD0 (0x02 << 16)
#define S3C2400_GPC8_VD8 (0x02 << 16)
#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
#define S3C2410_GPC9_INP (0x00 << 18)
#define S3C2410_GPC9_OUTP (0x01 << 18)
#define S3C2410_GPC9_VD1 (0x02 << 18)
#define S3C2400_GPC9_VD9 (0x02 << 18)
#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
#define S3C2410_GPC10_INP (0x00 << 20)
#define S3C2410_GPC10_OUTP (0x01 << 20)
#define S3C2410_GPC10_VD2 (0x02 << 20)
#define S3C2400_GPC10_VD10 (0x02 << 20)
#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
#define S3C2410_GPC11_INP (0x00 << 22)
#define S3C2410_GPC11_OUTP (0x01 << 22)
#define S3C2410_GPC11_VD3 (0x02 << 22)
#define S3C2400_GPC11_VD11 (0x02 << 22)
#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
#define S3C2410_GPC12_INP (0x00 << 24)
#define S3C2410_GPC12_OUTP (0x01 << 24)
#define S3C2410_GPC12_VD4 (0x02 << 24)
#define S3C2400_GPC12_VD12 (0x02 << 24)
#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
#define S3C2410_GPC13_INP (0x00 << 26)
#define S3C2410_GPC13_OUTP (0x01 << 26)
#define S3C2410_GPC13_VD5 (0x02 << 26)
#define S3C2400_GPC13_VD13 (0x02 << 26)
#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
#define S3C2410_GPC14_INP (0x00 << 28)
#define S3C2410_GPC14_OUTP (0x01 << 28)
#define S3C2410_GPC14_VD6 (0x02 << 28)
#define S3C2400_GPC14_VD14 (0x02 << 28)
#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
#define S3C2410_GPC15_INP (0x00 << 30)
#define S3C2410_GPC15_OUTP (0x01 << 30)
#define S3C2410_GPC15_VD7 (0x02 << 30)
#define S3C2400_GPC15_VD15 (0x02 << 30)
......@@ -432,99 +300,51 @@
#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
#define S3C2410_GPD0_INP (0x00 << 0)
#define S3C2410_GPD0_OUTP (0x01 << 0)
#define S3C2410_GPD0_VD8 (0x02 << 0)
#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
#define S3C2410_GPD1_INP (0x00 << 2)
#define S3C2410_GPD1_OUTP (0x01 << 2)
#define S3C2410_GPD1_VD9 (0x02 << 2)
#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
#define S3C2410_GPD2_INP (0x00 << 4)
#define S3C2410_GPD2_OUTP (0x01 << 4)
#define S3C2410_GPD2_VD10 (0x02 << 4)
#define S3C2400_GPD2_VLINE (0x02 << 4)
#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
#define S3C2410_GPD3_INP (0x00 << 6)
#define S3C2410_GPD3_OUTP (0x01 << 6)
#define S3C2410_GPD3_VD11 (0x02 << 6)
#define S3C2400_GPD3_VCLK (0x02 << 6)
#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
#define S3C2410_GPD4_INP (0x00 << 8)
#define S3C2410_GPD4_OUTP (0x01 << 8)
#define S3C2410_GPD4_VD12 (0x02 << 8)
#define S3C2400_GPD4_LEND (0x02 << 8)
#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
#define S3C2410_GPD5_INP (0x00 << 10)
#define S3C2410_GPD5_OUTP (0x01 << 10)
#define S3C2410_GPD5_VD13 (0x02 << 10)
#define S3C2400_GPD5_TOUT0 (0x02 << 10)
#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
#define S3C2410_GPD6_INP (0x00 << 12)
#define S3C2410_GPD6_OUTP (0x01 << 12)
#define S3C2410_GPD6_VD14 (0x02 << 12)
#define S3C2400_GPD6_TOUT1 (0x02 << 12)
#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
#define S3C2410_GPD7_INP (0x00 << 14)
#define S3C2410_GPD7_OUTP (0x01 << 14)
#define S3C2410_GPD7_VD15 (0x02 << 14)
#define S3C2400_GPD7_TOUT2 (0x02 << 14)
#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
#define S3C2410_GPD8_INP (0x00 << 16)
#define S3C2410_GPD8_OUTP (0x01 << 16)
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
#define S3C2410_GPD9_INP (0x00 << 18)
#define S3C2410_GPD9_OUTP (0x01 << 18)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
#define S3C2410_GPD9_MASK (0x03 << 18)
#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
#define S3C2410_GPD10_INP (0x00 << 20)
#define S3C2410_GPD10_OUTP (0x01 << 20)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
#define S3C2410_GPD11_INP (0x00 << 22)
#define S3C2410_GPD11_OUTP (0x01 << 22)
#define S3C2410_GPD11_VD19 (0x02 << 22)
#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
#define S3C2410_GPD12_INP (0x00 << 24)
#define S3C2410_GPD12_OUTP (0x01 << 24)
#define S3C2410_GPD12_VD20 (0x02 << 24)
#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
#define S3C2410_GPD13_INP (0x00 << 26)
#define S3C2410_GPD13_OUTP (0x01 << 26)
#define S3C2410_GPD13_VD21 (0x02 << 26)
#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
#define S3C2410_GPD14_INP (0x00 << 28)
#define S3C2410_GPD14_OUTP (0x01 << 28)
#define S3C2410_GPD14_VD22 (0x02 << 28)
#define S3C2410_GPD14_nSS1 (0x03 << 28)
#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
#define S3C2410_GPD15_INP (0x00 << 30)
#define S3C2410_GPD15_OUTP (0x01 << 30)
#define S3C2410_GPD15_VD23 (0x02 << 30)
#define S3C2410_GPD15_nSS0 (0x03 << 30)
......@@ -550,34 +370,22 @@
#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
#define S3C2410_GPE0_INP (0x00 << 0)
#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
#define S3C2410_GPE1_INP (0x00 << 2)
#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
#define S3C2410_GPE2_INP (0x00 << 4)
#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
#define S3C2410_GPE3_INP (0x00 << 6)
#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
......@@ -585,9 +393,6 @@
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
#define S3C2410_GPE4_INP (0x00 << 8)
#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
......@@ -595,81 +400,48 @@
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
#define S3C2410_GPE5_INP (0x00 << 10)
#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
#define S3C2410_GPE6_INP (0x00 << 12)
#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
#define S3C2410_GPE7_INP (0x00 << 14)
#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
#define S3C2443_GPE7_AC_SDI (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
#define S3C2410_GPE8_INP (0x00 << 16)
#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
#define S3C2443_GPE8_AC_SDO (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
#define S3C2410_GPE9_INP (0x00 << 18)
#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
#define S3C2410_GPE10_INP (0x00 << 20)
#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
#define S3C2410_GPE11_INP (0x00 << 22)
#define S3C2410_GPE11_OUTP (0x01 << 22)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
#define S3C2400_GPE11_nXBREQ (0x03 << 22)
#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
#define S3C2410_GPE12_INP (0x00 << 24)
#define S3C2410_GPE12_OUTP (0x01 << 24)
#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
#define S3C2410_GPE13_INP (0x00 << 26)
#define S3C2410_GPE13_OUTP (0x01 << 26)
#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
#define S3C2410_GPE14_INP (0x00 << 28)
#define S3C2410_GPE14_OUTP (0x01 << 28)
#define S3C2410_GPE14_IICSCL (0x02 << 28)
#define S3C2410_GPE14_MASK (0x03 << 28)
#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
#define S3C2410_GPE15_INP (0x00 << 30)
#define S3C2410_GPE15_OUTP (0x01 << 30)
#define S3C2410_GPE15_IICSDA (0x02 << 30)
#define S3C2410_GPE15_MASK (0x03 << 30)
......@@ -705,55 +477,31 @@
#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
#define S3C2410_GPF0_INP (0x00 << 0)
#define S3C2410_GPF0_OUTP (0x01 << 0)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
#define S3C2400_GPF0_RXD0 (0x02 << 0)
#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
#define S3C2410_GPF1_INP (0x00 << 2)
#define S3C2410_GPF1_OUTP (0x01 << 2)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
#define S3C2400_GPF1_RXD1 (0x02 << 2)
#define S3C2400_GPF1_IICSDA (0x03 << 2)
#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
#define S3C2410_GPF2_INP (0x00 << 4)
#define S3C2410_GPF2_OUTP (0x01 << 4)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
#define S3C2400_GPF2_TXD0 (0x02 << 4)
#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
#define S3C2410_GPF3_INP (0x00 << 6)
#define S3C2410_GPF3_OUTP (0x01 << 6)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
#define S3C2400_GPF3_TXD1 (0x02 << 6)
#define S3C2400_GPF3_IICSCL (0x03 << 6)
#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
#define S3C2410_GPF4_INP (0x00 << 8)
#define S3C2410_GPF4_OUTP (0x01 << 8)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
#define S3C2400_GPF4_nRTS0 (0x02 << 8)
#define S3C2400_GPF4_nXBACK (0x03 << 8)
#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
#define S3C2410_GPF5_INP (0x00 << 10)
#define S3C2410_GPF5_OUTP (0x01 << 10)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
#define S3C2400_GPF5_nCTS0 (0x02 << 10)
#define S3C2400_GPF5_nXBREQ (0x03 << 10)
#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
#define S3C2410_GPF6_INP (0x00 << 12)
#define S3C2410_GPF6_OUTP (0x01 << 12)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
#define S3C2400_GPF6_CLKOUT (0x02 << 12)
#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
#define S3C2410_GPF7_INP (0x00 << 14)
#define S3C2410_GPF7_OUTP (0x01 << 14)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
#define S3C2410_GPF_PUPDIS(x) (1<<(x))
......@@ -778,117 +526,69 @@
#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
#define S3C2410_GPG0_INP (0x00 << 0)
#define S3C2410_GPG0_OUTP (0x01 << 0)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
#define S3C2410_GPG1_INP (0x00 << 2)
#define S3C2410_GPG1_OUTP (0x01 << 2)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
#define S3C2410_GPG2_INP (0x00 << 4)
#define S3C2410_GPG2_OUTP (0x01 << 4)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
#define S3C2410_GPG2_nSS0 (0x03 << 4)
#define S3C2400_GPG2_CDCLK (0x02 << 4)
#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
#define S3C2410_GPG3_INP (0x00 << 6)
#define S3C2410_GPG3_OUTP (0x01 << 6)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
#define S3C2410_GPG3_nSS1 (0x03 << 6)
#define S3C2400_GPG3_I2SSDO (0x02 << 6)
#define S3C2400_GPG3_I2SSDI (0x03 << 6)
#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
#define S3C2410_GPG4_INP (0x00 << 8)
#define S3C2410_GPG4_OUTP (0x01 << 8)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
#define S3C2410_GPG5_INP (0x00 << 10)
#define S3C2410_GPG5_OUTP (0x01 << 10)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
#define S3C2410_GPG6_INP (0x00 << 12)
#define S3C2410_GPG6_OUTP (0x01 << 12)
#define S3C2410_GPG6_EINT14 (0x02 << 12)
#define S3C2400_GPG6_MMCDAT (0x02 << 12)
#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
#define S3C2410_GPG7_INP (0x00 << 14)
#define S3C2410_GPG7_OUTP (0x01 << 14)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
#define S3C2400_GPG7_SPIMISO (0x02 << 14)
#define S3C2400_GPG7_IICSDA (0x03 << 14)
#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
#define S3C2410_GPG8_INP (0x00 << 16)
#define S3C2410_GPG8_OUTP (0x01 << 16)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
#define S3C2400_GPG8_IICSCL (0x03 << 16)
#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
#define S3C2410_GPG9_INP (0x00 << 18)
#define S3C2410_GPG9_OUTP (0x01 << 18)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
#define S3C2400_GPG9_SPICLK (0x02 << 18)
#define S3C2400_GPG9_MMCCLK (0x03 << 18)
#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
#define S3C2410_GPG10_INP (0x00 << 20)
#define S3C2410_GPG10_OUTP (0x01 << 20)
#define S3C2410_GPG10_EINT18 (0x02 << 20)
#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
#define S3C2410_GPG11_INP (0x00 << 22)
#define S3C2410_GPG11_OUTP (0x01 << 22)
#define S3C2410_GPG11_EINT19 (0x02 << 22)
#define S3C2410_GPG11_TCLK1 (0x03 << 22)
#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
#define S3C2410_GPG12_INP (0x00 << 24)
#define S3C2410_GPG12_OUTP (0x01 << 24)
#define S3C2410_GPG12_EINT20 (0x02 << 24)
#define S3C2410_GPG12_XMON (0x03 << 24)
#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
#define S3C2443_GPG12_nINPACK (0x03 << 24)
#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
#define S3C2410_GPG13_INP (0x00 << 26)
#define S3C2410_GPG13_OUTP (0x01 << 26)
#define S3C2410_GPG13_EINT21 (0x02 << 26)
#define S3C2410_GPG13_nXPON (0x03 << 26)
#define S3C2443_GPG13_CF_nREG (0x03 << 26)
#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
#define S3C2410_GPG14_INP (0x00 << 28)
#define S3C2410_GPG14_OUTP (0x01 << 28)
#define S3C2410_GPG14_EINT22 (0x02 << 28)
#define S3C2410_GPG14_YMON (0x03 << 28)
#define S3C2443_GPG14_CF_RESET (0x03 << 28)
#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
#define S3C2410_GPG15_INP (0x00 << 30)
#define S3C2410_GPG15_OUTP (0x01 << 30)
#define S3C2410_GPG15_EINT23 (0x02 << 30)
#define S3C2410_GPG15_nYPON (0x03 << 30)
#define S3C2443_GPG15_CF_PWR (0x03 << 30)
......@@ -907,62 +607,29 @@
#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
#define S3C2410_GPH0_INP (0x00 << 0)
#define S3C2410_GPH0_OUTP (0x01 << 0)
#define S3C2410_GPH0_nCTS0 (0x02 << 0)
#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
#define S3C2410_GPH1_INP (0x00 << 2)
#define S3C2410_GPH1_OUTP (0x01 << 2)
#define S3C2410_GPH1_nRTS0 (0x02 << 2)
#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
#define S3C2410_GPH2_INP (0x00 << 4)
#define S3C2410_GPH2_OUTP (0x01 << 4)
#define S3C2410_GPH2_TXD0 (0x02 << 4)
#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
#define S3C2410_GPH3_INP (0x00 << 6)
#define S3C2410_GPH3_OUTP (0x01 << 6)
#define S3C2410_GPH3_RXD0 (0x02 << 6)
#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
#define S3C2410_GPH4_INP (0x00 << 8)
#define S3C2410_GPH4_OUTP (0x01 << 8)
#define S3C2410_GPH4_TXD1 (0x02 << 8)
#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
#define S3C2410_GPH5_INP (0x00 << 10)
#define S3C2410_GPH5_OUTP (0x01 << 10)
#define S3C2410_GPH5_RXD1 (0x02 << 10)
#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
#define S3C2410_GPH6_INP (0x00 << 12)
#define S3C2410_GPH6_OUTP (0x01 << 12)
#define S3C2410_GPH6_TXD2 (0x02 << 12)
#define S3C2410_GPH6_nRTS1 (0x03 << 12)
#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
#define S3C2410_GPH7_INP (0x00 << 14)
#define S3C2410_GPH7_OUTP (0x01 << 14)
#define S3C2410_GPH7_RXD2 (0x02 << 14)
#define S3C2410_GPH7_nCTS1 (0x03 << 14)
#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
#define S3C2410_GPH8_INP (0x00 << 16)
#define S3C2410_GPH8_OUTP (0x01 << 16)
#define S3C2410_GPH8_UCLK (0x02 << 16)
#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
#define S3C2410_GPH9_INP (0x00 << 18)
#define S3C2410_GPH9_OUTP (0x01 << 18)
#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
#define S3C2410_GPH10_INP (0x00 << 20)
#define S3C2410_GPH10_OUTP (0x01 << 20)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
/* The S3C2412 and S3C2413 move the GPJ register set to after
......
arch/arm/mach-s3c2410/mach-amlm5900.c
View file @ 99ae9953
......@@ -32,6 +32,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
......@@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
s3c2410_gpio_pullup(S3C2410_GPF2, 0);
s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
}
}
static void __init amlm5900_init(void)
......
arch/arm/mach-s3c2410/mach-bast.c
View file @ 99ae9953
......@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
......@@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
{
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
static int bast_pm_resume(struct sys_device *sd)
{
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
......@@ -593,8 +594,6 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
usb_simtec_init();
}
static void __init bast_init(void)
......@@ -608,6 +607,7 @@ static void __init bast_init(void)
i2c_register_board_info(0, bast_i2c_devs,
ARRAY_SIZE(bast_i2c_devs));
usb_simtec_init();
nor_simtec_init();
}
......
arch/arm/mach-s3c2410/mach-h1940.c
View file @ 99ae9953
......@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.udc_command = h1940_udc_pullup,
.vbus_pin = S3C2410_GPG5,
.vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
};
......
arch/arm/mach-s3c2410/mach-n30.c
View file @ 99ae9953
......@@ -19,6 +19,7 @@
#include <linux/gpio_keys.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
......@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
s3c2410_gpio_setpin(S3C2410_GPB3, 1);
s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
break;
case S3C2410_UDC_P_DISABLE :
s3c2410_gpio_setpin(S3C2410_GPB3, 0);
s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
break;
case S3C2410_UDC_P_RESET :
break;
......@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
.udc_command = n30_udc_pullup,
.vbus_pin = S3C2410_GPG1,
.vbus_pin = S3C2410_GPG(1),
.vbus_pin_inverted = 0,
};
static struct gpio_keys_button n30_buttons[] = {
{
.gpio = S3C2410_GPF0,
.gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
.gpio = S3C2410_GPG9,
.gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Thumbwheel Up",
.active_low = 0,
},
{
.gpio = S3C2410_GPG8,
.gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Thumbwheel Down",
.active_low = 0,
},
{
.gpio = S3C2410_GPG7,
.gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Thumbwheel Press",
.active_low = 0,
},
{
.gpio = S3C2410_GPF7,
.gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
.gpio = S3C2410_GPF6,
.gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
.gpio = S3C2410_GPF5,
.gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
.gpio = S3C2410_GPF4,
.gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
......@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
static struct gpio_keys_button n35_buttons[] = {
{
.gpio = S3C2410_GPF0,
.gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
.gpio = S3C2410_GPG9,
.gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Joystick Up",
.active_low = 0,
},
{
.gpio = S3C2410_GPG8,
.gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Joystick Down",
.active_low = 0,
},
{
.gpio = S3C2410_GPG6,
.gpio = S3C2410_GPG(6),
.code = KEY_DOWN,
.desc = "Joystick Left",
.active_low = 0,
},
{
.gpio = S3C2410_GPG5,
.gpio = S3C2410_GPG(5),
.code = KEY_DOWN,
.desc = "Joystick Right",
.active_low = 0,
},
{
.gpio = S3C2410_GPG7,
.gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Joystick Press",
.active_low = 0,
},
{
.gpio = S3C2410_GPF7,
.gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
.gpio = S3C2410_GPF6,
.gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
.gpio = S3C2410_GPF5,
.gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
.gpio = S3C2410_GPF4,
.gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
},
{
.gpio = S3C2410_GPF3,
.gpio = S3C2410_GPF(3),
.code = SW_RADIO,
.desc = "GPS Antenna",
.active_low = 0,
},
{
.gpio = S3C2410_GPG2,
.gpio = S3C2410_GPG(2),
.code = SW_HEADPHONE_INSERT,
.desc = "Headphone",
.active_low = 0,
......@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
/* This is the bluetooth LED on the device. */
static struct s3c24xx_led_platdata n30_blue_led_pdata = {
.name = "blue_led",
.gpio = S3C2410_GPG6,
.gpio = S3C2410_GPG(6),
.def_trigger = "",
};
......@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
static struct s3c24xx_led_platdata n30_warning_led_pdata = {
.name = "warning_led",
.flags = S3C24XX_LEDF_ACTLOW,
.gpio = S3C2410_GPD9,
.gpio = S3C2410_GPD(9),
.def_trigger = "",
};
......
arch/arm/mach-s3c2410/mach-qt2410.c
View file @ 99ae9953
......@@ -27,6 +27,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
......@@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
/* LED */
static struct s3c24xx_led_platdata qt2410_pdata_led = {
.gpio = S3C2410_GPB0,
.gpio = S3C2410_GPB(0),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led",
.def_trigger = "timer",
......@@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
{
switch (cs) {
case BITBANG_CS_ACTIVE:
s3c2410_gpio_setpin(S3C2410_GPB5, 0);
s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
break;
case BITBANG_CS_INACTIVE:
s3c2410_gpio_setpin(S3C2410_GPB5, 1);
s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
break;
}
}
static struct s3c2410_spigpio_info spi_gpio_cfg = {
.pin_clk = S3C2410_GPG7,
.pin_mosi = S3C2410_GPG6,
.pin_miso = S3C2410_GPG5,
.pin_clk = S3C2410_GPG(7),
.pin_mosi = S3C2410_GPG(6),
.pin_miso = S3C2410_GPG(5),
.chip_select = &spi_gpio_cs,
};
......@@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB0, 1);
s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
......
arch/arm/mach-s3c2410/mach-vr1000.c
View file @ 99ae9953
......@@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/i2c.h>
......@@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
static struct s3c24xx_led_platdata vr1000_led1_pdata = {
.name = "led1",
.gpio = S3C2410_GPB0,
.gpio = S3C2410_GPB(0),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led2_pdata = {
.name = "led2",
.gpio = S3C2410_GPB1,
.gpio = S3C2410_GPB(1),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led3_pdata = {
.name = "led3",
.gpio = S3C2410_GPB2,
.gpio = S3C2410_GPB(2),
.def_trigger = "",
};
......@@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
static void vr1000_power_off(void)
{
s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
s3c2410_gpio_setpin(S3C2410_GPB9, 1);
s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
}
static void __init vr1000_map_io(void)
......
arch/arm/mach-s3c2410/pm.c
View file @ 99ae9953
......@@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/sysdev.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/hardware.h>
......@@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
}
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF2, 1);
s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
}
......@@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
__raw_writel(tmp, S3C2410_GSTATUS2);
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
return 0;
}
......
arch/arm/mach-s3c2410/usb-simtec.c
View file @ 99ae9953
......@@ -18,9 +18,11 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/gpio.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
......@@ -29,7 +31,6 @@
#include <mach/bast-map.h>
#include <mach/bast-irq.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
......@@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
power_state[port] = to;
if (power_state[0] && power_state[1])
s3c2410_gpio_setpin(S3C2410_GPB4, 0);
gpio_set_value(S3C2410_GPB(4), 0);
else
s3c2410_gpio_setpin(S3C2410_GPB4, 1);
gpio_set_value(S3C2410_GPB(4), 1);
}
static irqreturn_t
......@@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
{
struct s3c2410_hcd_info *info = pw;
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
if (gpio_get_value(S3C2410_GPG(10)) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
s3c2410_usb_report_oc(info, 3);
} else {
......@@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
int usb_simtec_init(void)
{
int ret;
printk("USB Power Control, (c) 2004 Simtec Electronics\n");
s3c_device_usb.dev.platform_data = &usb_simtec_info;
s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
s3c2410_gpio_setpin(S3C2410_GPB4, 1);
ret = gpio_request(S3C2410_GPB(4), "USB power control");
if (ret < 0) {
pr_err("%s: failed to get GPB4\n", __func__);
return ret;
}
ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
if (ret < 0) {
pr_err("%s: failed to get GPG10\n", __func__);
gpio_free(S3C2410_GPB(4));
return ret;
}
/* turn power on */
gpio_direction_output(S3C2410_GPB(4), 1);
gpio_direction_input(S3C2410_GPG(10));
s3c_device_usb.dev.platform_data = &usb_simtec_info;
return 0;
}
arch/arm/mach-s3c2412/mach-jive.c
View file @ 99ae9953
......@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
......@@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
{
printk(KERN_DEBUG "%s(%d)\n", __func__, set);
s3c2410_gpio_setpin(S3C2410_GPG13, set);
s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG(13), set);
s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
}
#undef LCD_UPPER_MARGIN
......@@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_lcd_spi = {
.bus_num = 1,
.pin_clk = S3C2410_GPG8,
.pin_mosi = S3C2410_GPB8,
.pin_clk = S3C2410_GPG(8),
.pin_mosi = S3C2410_GPB(8),
.num_chipselect = 1,
.chip_select = jive_lcd_spi_chipselect,
};
......@@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_wm8750_spi = {
.bus_num = 2,
.pin_clk = S3C2410_GPB4,
.pin_mosi = S3C2410_GPB9,
.pin_clk = S3C2410_GPB(4),
.pin_mosi = S3C2410_GPB(9),
.num_chipselect = 1,
.chip_select = jive_wm8750_chipselect,
};
......@@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
.vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */
.vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
};
/* Jive power management device */
......@@ -529,8 +530,8 @@ static void jive_power_off(void)
{
printk(KERN_INFO "powering system down...\n");
s3c2410_gpio_setpin(S3C2410_GPC5, 1);
s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
}
static void __init jive_machine_init(void)
......@@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
/* initialise the spi */
s3c2410_gpio_setpin(S3C2410_GPG13, 0);
s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB7, 1);
s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB6, 0);
s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG8, 1);
s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
/* initialise the WM8750 spi */
s3c2410_gpio_setpin(S3C2410_GPH10, 1);
s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
......
arch/arm/mach-s3c2412/mach-smdk2413.c
View file @ 99ae9953
......@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
......@@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
switch (cmd)
{
case S3C2410_UDC_P_ENABLE :
s3c2410_gpio_setpin(S3C2410_GPF2, 1);
s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
break;
case S3C2410_UDC_P_DISABLE :
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
break;
case S3C2410_UDC_P_RESET :
break;
......@@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
......
arch/arm/mach-s3c2440/mach-anubis.c
View file @ 99ae9953
......@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
......@@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
}
......
arch/arm/mach-s3c2440/mach-at2440evb.c
View file @ 99ae9953
......@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
.gpio_detect = S3C2410_GPG10,
.gpio_detect = S3C2410_GPG(10),
};
/* 7" LCD panel */
......
arch/arm/mach-s3c2440/mach-nexcoder.c
View file @ 99ae9953
......@@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
......@@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
// Power up the sensor board
s3c2410_gpio_setpin(S3C2410_GPF1, 1);
s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF2, 0);
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
}
static void __init nexcoder_map_io(void)
......
arch/arm/mach-s3c2440/mach-osiris.c
View file @ 99ae9953
......@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
......@@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA21, 1);
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
......@@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
......@@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
......
arch/arm/plat-s3c24xx/common-smdk.c
View file @ 99ae9953
......@@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
......@@ -47,27 +48,27 @@
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
.gpio = S3C2410_GPF4,
.gpio = S3C2410_GPF(4),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led4",
.def_trigger = "timer",
};
static struct s3c24xx_led_platdata smdk_pdata_led5 = {
.gpio = S3C2410_GPF5,
.gpio = S3C2410_GPF(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led5",
.def_trigger = "nand-disk",
};
static struct s3c24xx_led_platdata smdk_pdata_led6 = {
.gpio = S3C2410_GPF6,
.gpio = S3C2410_GPF(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led6",
};
static struct s3c24xx_led_platdata smdk_pdata_led7 = {
.gpio = S3C2410_GPF7,
.gpio = S3C2410_GPF(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led7",
};
......@@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPF4, 1);
s3c2410_gpio_setpin(S3C2410_GPF5, 1);
s3c2410_gpio_setpin(S3C2410_GPF6, 1);
s3c2410_gpio_setpin(S3C2410_GPF7, 1);
s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
......
arch/arm/plat-s3c24xx/gpio.c
View file @ 99ae9953
......@@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
int s3c2410_gpio_getirq(unsigned int pin)
{
if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
return -1; /* not valid interrupts */
if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
return -EINVAL; /* not valid interrupts */
if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
return -1; /* not valid pin */
if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
return -EINVAL; /* not valid pin */
if (pin < S3C2410_GPF4)
return (pin - S3C2410_GPF0) + IRQ_EINT0;
if (pin < S3C2410_GPF(4))
return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
if (pin < S3C2410_GPG0)
return (pin - S3C2410_GPF4) + IRQ_EINT4;
if (pin < S3C2410_GPG(0))
return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
return (pin - S3C2410_GPG0) + IRQ_EINT8;
return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
int s3c2410_gpio_irq2pin(unsigned int irq)
{
if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
return S3C2410_GPF0 + (irq - IRQ_EINT0);
if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
return S3C2410_GPF4 + (irq - IRQ_EINT4);
if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
return S3C2410_GPG0 + (irq - IRQ_EINT8);
return -EINVAL;
}
EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
arch/arm/plat-s3c24xx/gpiolib.c
View file @ 99ae9953
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/gpio.h>
......@@ -78,10 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
struct s3c_gpio_chip s3c24xx_gpios[] = {
[0] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
.base = S3C2410_GPACON,
.pm = __gpio_pm(&s3c_gpio_pm_1bit),
.chip = {
.base = S3C2410_GPA0,
.base = S3C2410_GPA(0),
.owner = THIS_MODULE,
.label = "GPIOA",
.ngpio = 24,
......@@ -90,50 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
},
},
[1] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPB0),
.base = S3C2410_GPBCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPB0,
.base = S3C2410_GPB(0),
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
},
},
[2] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPC0),
.base = S3C2410_GPCCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPC0,
.base = S3C2410_GPC(0),
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
},
},
[3] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPD0),
.base = S3C2410_GPDCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPD0,
.base = S3C2410_GPD(0),
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
},
},
[4] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPE0),
.base = S3C2410_GPECON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPE0,
.base = S3C2410_GPE(0),
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
},
},
[5] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPF0),
.base = S3C2410_GPFCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPF0,
.base = S3C2410_GPF(0),
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
......@@ -141,15 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
},
},
[6] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPG0),
.base = S3C2410_GPGCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPG0,
.base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 10,
.ngpio = 16,
.to_irq = s3c24xx_gpiolib_bankg_toirq,
},
}, {
.base = S3C2410_GPHCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPH(0),
.owner = THIS_MODULE,
.label = "GPIOH",
.ngpio = 11,
},
},
};
......@@ -164,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
return 0;
}
arch_initcall(s3c24xx_gpiolib_init);
core_initcall(s3c24xx_gpiolib_init);
arch/arm/plat-s3c24xx/pm.c
View file @ 99ae9953
......@@ -30,6 +30,7 @@
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/io.h>
......@@ -123,12 +124,12 @@ void s3c_pm_configure_extint(void)
* and then configure it as an input if it is not
*/
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
}
for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
}
}
......
arch/arm/plat-s3c24xx/setup-i2c.c
View file @ 99ae9953
......@@ -11,6 +11,7 @@
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
struct platform_device;
......@@ -20,6 +21,6 @@ struct platform_device;
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
}
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
View file @ 99ae9953
......@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
s3c2410_gpio_pullup(S3C2410_GPE11, 0);
s3c2410_gpio_pullup(S3C2410_GPE13, 0);
s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
} else {
s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPE11, 1);
s3c2410_gpio_pullup(S3C2410_GPE12, 1);
s3c2410_gpio_pullup(S3C2410_GPE13, 1);
s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
}
}
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
View file @ 99ae9953
......@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
s3c2410_gpio_pullup(S3C2410_GPG5, 0);
s3c2410_gpio_pullup(S3C2410_GPG6, 0);
s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
} else {
s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPG5, 1);
s3c2410_gpio_pullup(S3C2410_GPG6, 1);
s3c2410_gpio_pullup(S3C2410_GPG7, 1);
s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
}
}
drivers/leds/leds-h1940.c
View file @ 99ae9953
......@@ -16,6 +16,8 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/h1940-latch.h>
......
drivers/leds/leds-s3c24xx.c
View file @ 99ae9953
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
......
drivers/mmc/host/s3cmci.c
View file @ 99ae9953
......@@ -17,6 +17,7 @@
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
......@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_OFF:
default:
s3c2410_gpio_setpin(S3C2410_GPE5, 0);
s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
......
drivers/spi/spi_s3c24xx_gpio.c
View file @ 99ae9953
......@@ -17,6 +17,7 @@
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
......
sound/soc/s3c24xx/s3c2412-i2s.c
View file @ 99ae9953
......@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/io.h>
......
sound/soc/s3c24xx/s3c2443-ac97.c
View file @ 99ae9953
......@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <sound/core.h>
......
sound/soc/s3c24xx/s3c24xx-i2s.c
View file @ 99ae9953
......@@ -21,6 +21,8 @@
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7