Merge patmans/axboe

drivers/scsi/hosts.c

@@ -383,6 +383,7 @@ struct Scsi_Host * scsi_register(Scsi_Host_Template *shost_tp, int xtr_bytes)
 	scsi_assign_lock(shost, &shost->default_lock);
 	INIT_LIST_HEAD(&shost->my_devices);
 	INIT_LIST_HEAD(&shost->eh_cmd_q);
+	INIT_LIST_HEAD(&shost->starved_list);
 
 	init_waitqueue_head(&shost->host_wait);
 	shost->dma_channel = 0xff;
@@ -619,7 +620,6 @@ void scsi_host_busy_dec_and_test(struct Scsi_Host *shost, Scsi_Device *sdev)
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	shost->host_busy--;
-	sdev->device_busy--;
 	if (shost->in_recovery && shost->host_failed &&
 	    (shost->host_busy == shost->host_failed))
 	{

drivers/scsi/hosts.h

@@ -380,6 +380,7 @@ struct Scsi_Host
     struct scsi_host_cmd_pool *cmd_pool;
     spinlock_t            free_list_lock;
     struct list_head      free_list;   /* backup store of cmd structs */
+    struct list_head      starved_list;
 
     spinlock_t		  default_lock;
     spinlock_t		  *host_lock;
@@ -470,12 +471,6 @@ struct Scsi_Host
      */
     unsigned reverse_ordering:1;
 
-    /*
-     * Indicates that one or more devices on this host were starved, and
-     * when the device becomes less busy that we need to feed them.
-     */
-    unsigned some_device_starved:1;
-   
     /*
      * Host has rejected a command because it was busy.
      */

drivers/scsi/scsi.c

@@ -447,8 +447,6 @@ int scsi_dispatch_cmd(Scsi_Cmnd * SCpnt)
 
 	host = SCpnt->device->host;
 
-	ASSERT_LOCK(host->host_lock, 0);
-
 	/* Assign a unique nonzero serial_number. */
 	if (++serial_number == 0)
 		serial_number = 1;
@@ -574,8 +572,6 @@ void scsi_init_cmd_from_req(Scsi_Cmnd * SCpnt, Scsi_Request * SRpnt)
 {
 	struct Scsi_Host *host = SCpnt->device->host;
 
-	ASSERT_LOCK(host->host_lock, 0);
-
 	SCpnt->owner = SCSI_OWNER_MIDLEVEL;
 	SRpnt->sr_command = SCpnt;
 
@@ -819,12 +815,11 @@ void scsi_finish_command(Scsi_Cmnd * SCpnt)
 	struct Scsi_Host *host;
 	Scsi_Device *device;
 	Scsi_Request * SRpnt;
+	unsigned int flags;
 
 	host = SCpnt->device->host;
 	device = SCpnt->device;
 
-	ASSERT_LOCK(host->host_lock, 0);
-
         /*
          * We need to protect the decrement, as otherwise a race condition
          * would exist.  Fiddling with SCpnt isn't a problem as the
@@ -833,6 +828,9 @@ void scsi_finish_command(Scsi_Cmnd * SCpnt)
          * shared.
          */
 	scsi_host_busy_dec_and_test(host, device);
+	spin_lock_irqsave(SCpnt->device->request_queue->queue_lock, flags);
+	SCpnt->device->device_busy--;
+	spin_unlock_irqrestore(SCpnt->device->request_queue->queue_lock, flags);
 
         /*
          * Clear the flags which say that the device/host is no longer

drivers/scsi/scsi.h

@@ -417,7 +417,8 @@ extern void scsi_setup_cmd_retry(Scsi_Cmnd *SCpnt);
 extern void scsi_io_completion(Scsi_Cmnd * SCpnt, int good_sectors,
 			       int block_sectors);
 extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
-extern request_queue_t *scsi_alloc_queue(struct Scsi_Host *shost);
+extern void scsi_queue_next_request(request_queue_t *q, struct scsi_cmnd *cmd);
+extern request_queue_t *scsi_alloc_queue(struct scsi_device *sdev);
 extern void scsi_free_queue(request_queue_t *q);
 extern int scsi_init_queue(void);
 extern void scsi_exit_queue(void);
@@ -530,6 +531,15 @@ struct scsi_dev_info_list {
 extern struct list_head scsi_dev_info_list;
 extern int scsi_dev_info_list_add_str(char *);
 
+/*
+ * scsi_target: representation of a scsi target, for now, this is only
+ * used for single_lun devices.
+ */
+struct scsi_target {
+	unsigned int starget_busy;
+	unsigned int starget_refcnt;
+};
+
 /*
  *  The scsi_device struct contains what we know about each given scsi
  *  device.
@@ -554,8 +564,10 @@ struct scsi_device {
 	struct Scsi_Host *host;
 	request_queue_t *request_queue;
 	volatile unsigned short device_busy;	/* commands actually active on low-level */
+	spinlock_t sdev_lock;           /* also the request queue_lock */
 	spinlock_t list_lock;
 	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
+	struct list_head starved_entry;
         Scsi_Cmnd *current_cmnd;	/* currently active command */
 	unsigned short queue_depth;	/* How deep of a queue we want */
 	unsigned short last_queue_full_depth; /* These two are used by */
@@ -586,6 +598,7 @@ struct scsi_device {
 	unsigned char current_tag;	/* current tag */
 //	unsigned char sync_min_period;	/* Not less than this period */
 //	unsigned char sync_max_offset;	/* Not greater than this offset */
+	struct scsi_target      *sdev_target;   /* used only for single_lun */
 
 	unsigned online:1;
 	unsigned writeable:1;
@@ -616,8 +629,6 @@ struct scsi_device {
 					 * because we did a bus reset. */
 	unsigned ten:1;		/* support ten byte read / write */
 	unsigned remap:1;	/* support remapping  */
-	unsigned starved:1;	/* unable to process commands because
-				   host busy */
 //	unsigned sync:1;	/* Sync transfer state, managed by host */
 //	unsigned wide:1;	/* WIDE transfer state, managed by host */
 

drivers/scsi/scsi_error.c

@@ -431,8 +431,6 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
 	unsigned long flags;
 	int rtn = SUCCESS;
 
-	ASSERT_LOCK(host->host_lock, 0);
-
 	/*
 	 * we will use a queued command if possible, otherwise we will
 	 * emulate the queuing and calling of completion function ourselves.
@@ -1405,8 +1403,6 @@ static void scsi_restart_operations(struct Scsi_Host *shost)
 	struct scsi_device *sdev;
 	unsigned long flags;
 
-	ASSERT_LOCK(shost->host_lock, 0);
-
 	/*
 	 * If the door was locked, we need to insert a door lock request
 	 * onto the head of the SCSI request queue for the device.  There
@@ -1434,18 +1430,11 @@ static void scsi_restart_operations(struct Scsi_Host *shost)
 	 * now that error recovery is done, we will need to ensure that these
 	 * requests are started.
 	 */
-	spin_lock_irqsave(shost->host_lock, flags);
 	list_for_each_entry(sdev, &shost->my_devices, siblings) {
-		if ((shost->can_queue > 0 &&
-		     (shost->host_busy >= shost->can_queue))
-		    || (shost->host_blocked)
-		    || (shost->host_self_blocked)) {
-			break;
-		}
-
+		spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
 		__blk_run_queue(sdev->request_queue);
+		spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 	}
-	spin_unlock_irqrestore(shost->host_lock, flags);
 }
 
 /**
@@ -1681,6 +1670,7 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 	struct scsi_cmnd *scmd = scsi_get_command(dev, GFP_KERNEL);
 	struct request req;
 	int rtn;
+	struct request_queue *q;
 
 	scmd->request = &req;
 	memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout));
@@ -1735,6 +1725,8 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 	}
 
 	scsi_delete_timer(scmd);
+	q = scmd->device->request_queue;
 	scsi_put_command(scmd);
+	scsi_queue_next_request(q, NULL);
 	return rtn;
 }

drivers/scsi/scsi_scan.c

@@ -387,7 +387,7 @@ static void print_inquiry(unsigned char *inq_result)
  *     Scsi_Device pointer, or NULL on failure.
  **/
 static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
-	       	struct request_queue **q, uint channel, uint id, uint lun)
+	       	uint channel, uint id, uint lun)
 {
 	struct scsi_device *sdev, *device;
 
@@ -407,6 +407,7 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 	INIT_LIST_HEAD(&sdev->siblings);
 	INIT_LIST_HEAD(&sdev->same_target_siblings);
 	INIT_LIST_HEAD(&sdev->cmd_list);
+	INIT_LIST_HEAD(&sdev->starved_entry);
 	spin_lock_init(&sdev->list_lock);
 
 	/*
@@ -421,14 +422,10 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 	 */
 	sdev->borken = 1;
 
-	if (!q || *q == NULL) {
-		sdev->request_queue = scsi_alloc_queue(shost);
+	spin_lock_init(&sdev->sdev_lock);
+	sdev->request_queue = scsi_alloc_queue(sdev);
 	if (!sdev->request_queue)
 		goto out_free_dev;
-	} else {
-		sdev->request_queue = *q;
-		*q = NULL;
-	}
 
 	sdev->request_queue->queuedata = sdev;
 	scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
@@ -468,10 +465,7 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
 	return sdev;
 
 out_free_queue:
-	if (q && sdev->request_queue) {
-		*q = sdev->request_queue;
-		sdev->request_queue = NULL;
-	} else if (sdev->request_queue)
+	if (sdev->request_queue)
 		scsi_free_queue(sdev->request_queue);
 
 out_free_dev:
@@ -491,6 +485,8 @@ static struct scsi_device *scsi_alloc_sdev(struct Scsi_Host *shost,
  **/
 static void scsi_free_sdev(struct scsi_device *sdev)
 {
+	unsigned int flags;
+
 	list_del(&sdev->siblings);
 	list_del(&sdev->same_target_siblings);
 
@@ -500,6 +496,14 @@ static void scsi_free_sdev(struct scsi_device *sdev)
 		sdev->host->hostt->slave_destroy(sdev);
 	if (sdev->inquiry)
 		kfree(sdev->inquiry);
+	if (sdev->single_lun) {
+		spin_lock_irqsave(sdev->host->host_lock, flags);
+		sdev->sdev_target->starget_refcnt--;
+		if (sdev->sdev_target->starget_refcnt == 0)
+			kfree(sdev->sdev_target);
+		spin_unlock_irqrestore(sdev->host->host_lock, flags);
+	}
+
 	kfree(sdev);
 }
 
@@ -1135,6 +1139,10 @@ static void scsi_probe_lun(Scsi_Request *sreq, char *inq_result,
 static int scsi_add_lun(Scsi_Device *sdev, Scsi_Request *sreq,
 		char *inq_result, int *bflags)
 {
+	struct scsi_device *sdev_sibling;
+	struct scsi_target *starget;
+	unsigned int flags;
+
 	/*
 	 * XXX do not save the inquiry, since it can change underneath us,
 	 * save just vendor/model/rev.
@@ -1256,10 +1264,38 @@ static int scsi_add_lun(Scsi_Device *sdev, Scsi_Request *sreq,
 
 	/*
 	 * If we need to allow I/O to only one of the luns attached to
-	 * this target id at a time, then we set this flag.
+	 * this target id at a time set single_lun, and allocate or modify
+	 * sdev_target.
 	 */
-	if (*bflags & BLIST_SINGLELUN)
+	if (*bflags & BLIST_SINGLELUN) {
 		sdev->single_lun = 1;
+		spin_lock_irqsave(sdev->host->host_lock, flags);
+		starget = NULL;
+		/*
+		 * Search for an existing target for this sdev.
+		 */
+		list_for_each_entry(sdev_sibling, &sdev->same_target_siblings,
+				    same_target_siblings) {
+			if (sdev_sibling->sdev_target != NULL) {
+				starget = sdev_sibling->sdev_target;
+				break;
+			}
+		}
+		if (!starget) {
+			starget = kmalloc(sizeof(*starget), GFP_KERNEL);
+			if (!starget) {
+				printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+				spin_unlock_irqrestore(sdev->host->host_lock,
+						       flags);
+				return SCSI_SCAN_NO_RESPONSE;
+			}
+			starget->starget_refcnt = 0;
+			starget->starget_busy = 0;
+		}
+		starget->starget_refcnt++;
+		sdev->sdev_target = starget;
+		spin_unlock_irqrestore(sdev->host->host_lock, flags);
+	}
 
 	/* if the device needs this changing, it may do so in the detect
 	 * function */
@@ -1288,15 +1324,15 @@ static int scsi_add_lun(Scsi_Device *sdev, Scsi_Request *sreq,
  *     SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
  **/
 static int scsi_probe_and_add_lun(struct Scsi_Host *host,
-		struct request_queue **q, uint channel, uint id, uint lun,
-		int *bflagsp, struct scsi_device **sdevp)
+		uint channel, uint id, uint lun, int *bflagsp,
+		struct scsi_device **sdevp)
 {
 	struct scsi_device *sdev;
 	struct scsi_request *sreq;
 	unsigned char *result;
 	int bflags, res = SCSI_SCAN_NO_RESPONSE;
 
-	sdev = scsi_alloc_sdev(host, q, channel, id, lun);
+	sdev = scsi_alloc_sdev(host, channel, id, lun);
 	if (!sdev)
 		goto out;
 	sreq = scsi_allocate_request(sdev);
@@ -1350,13 +1386,8 @@ static int scsi_probe_and_add_lun(struct Scsi_Host *host,
 	if (res == SCSI_SCAN_LUN_PRESENT) {
 		if (sdevp)
 			*sdevp = sdev;
-	} else {
-		if (q) {
-			*q = sdev->request_queue;
-			sdev->request_queue = NULL;
-		}
+	} else
 		scsi_free_sdev(sdev);
-	}
  out:
 	return res;
 }
@@ -1374,9 +1405,8 @@ static int scsi_probe_and_add_lun(struct Scsi_Host *host,
  *
  *     Modifies sdevscan->lun.
  **/
-static void scsi_sequential_lun_scan(struct Scsi_Host *shost,
-	       	struct request_queue **q, uint channel, uint id,
-	       	int bflags, int lun0_res, int scsi_level)
+static void scsi_sequential_lun_scan(struct Scsi_Host *shost, uint channel,
+		uint id, int bflags, int lun0_res, int scsi_level)
 {
 	unsigned int sparse_lun, lun, max_dev_lun;
 
@@ -1444,7 +1474,7 @@ static void scsi_sequential_lun_scan(struct Scsi_Host *shost,
 	 * sparse_lun.
 	 */
 	for (lun = 1; lun < max_dev_lun; ++lun)
-		if ((scsi_probe_and_add_lun(shost, q, channel, id, lun,
+		if ((scsi_probe_and_add_lun(shost, channel, id, lun,
 		      NULL, NULL) != SCSI_SCAN_LUN_PRESENT) && !sparse_lun)
 			return;
 }
@@ -1497,8 +1527,7 @@ static int scsilun_to_int(ScsiLun *scsilun)
  *     0: scan completed (or no memory, so further scanning is futile)
  *     1: no report lun scan, or not configured
  **/
-static int scsi_report_lun_scan(Scsi_Device *sdev, struct request_queue **q,
-		int bflags)
+static int scsi_report_lun_scan(Scsi_Device *sdev, int bflags)
 {
 #ifdef CONFIG_SCSI_REPORT_LUNS
 
@@ -1659,8 +1688,8 @@ static int scsi_report_lun_scan(Scsi_Device *sdev, struct request_queue **q,
 		} else {
 			int res;
 
-			res = scsi_probe_and_add_lun(sdev->host, q,
-				sdev->channel, sdev->id, lun, NULL, NULL);
+			res = scsi_probe_and_add_lun(sdev->host, sdev->channel,
+				sdev->id, lun, NULL, NULL);
 			if (res == SCSI_SCAN_NO_RESPONSE) {
 				/*
 				 * Got some results, but now none, abort.
@@ -1688,8 +1717,7 @@ struct scsi_device *scsi_add_device(struct Scsi_Host *shost,
 	struct scsi_device *sdev;
 	int error = -ENODEV, res;
 
-	res = scsi_probe_and_add_lun(shost, NULL, channel, id, lun,
-			NULL, &sdev);
+	res = scsi_probe_and_add_lun(shost, channel, id, lun, NULL, &sdev);
 	if (res == SCSI_SCAN_LUN_PRESENT)
 		error = scsi_attach_device(sdev);
 
@@ -1730,8 +1758,8 @@ int scsi_remove_device(struct scsi_device *sdev)
  *     First try a REPORT LUN scan, if that does not scan the target, do a
  *     sequential scan of LUNs on the target id.
  **/
-static void scsi_scan_target(struct Scsi_Host *shost, struct request_queue **q,
-			     unsigned int channel, unsigned int id)
+static void scsi_scan_target(struct Scsi_Host *shost, unsigned int channel,
+			     unsigned int id)
 {
 	int bflags = 0;
 	int res;
@@ -1747,14 +1775,14 @@ static void scsi_scan_target(struct Scsi_Host *shost, struct request_queue **q,
 	 * Scan LUN 0, if there is some response, scan further. Ideally, we
 	 * would not configure LUN 0 until all LUNs are scanned.
 	 */
-	res = scsi_probe_and_add_lun(shost, q, channel, id, 0, &bflags, &sdev);
+	res = scsi_probe_and_add_lun(shost, channel, id, 0, &bflags, &sdev);
 	if (res == SCSI_SCAN_LUN_PRESENT) {
-		if (scsi_report_lun_scan(sdev, q, bflags) != 0)
+		if (scsi_report_lun_scan(sdev, bflags) != 0)
 			/*
 			 * The REPORT LUN did not scan the target,
 			 * do a sequential scan.
 			 */
-			scsi_sequential_lun_scan(shost, q, channel, id, bflags,
+			scsi_sequential_lun_scan(shost, channel, id, bflags,
 				       	res, sdev->scsi_level);
 	} else if (res == SCSI_SCAN_TARGET_PRESENT) {
 		/*
@@ -1763,7 +1791,7 @@ static void scsi_scan_target(struct Scsi_Host *shost, struct request_queue **q,
 		 * sequential lun scan with a bflags of SPARSELUN and
 		 * a default scsi level of SCSI_2
 		 */
-		scsi_sequential_lun_scan(shost, q, channel, id, BLIST_SPARSELUN,
+		scsi_sequential_lun_scan(shost, channel, id, BLIST_SPARSELUN,
 				SCSI_SCAN_TARGET_PRESENT, SCSI_2);
 	}
 }
@@ -1778,7 +1806,6 @@ static void scsi_scan_target(struct Scsi_Host *shost, struct request_queue **q,
  **/
 void scsi_scan_host(struct Scsi_Host *shost)
 {
-	struct request_queue *q = NULL;
 	uint channel, id, order_id;
 
 	/*
@@ -1803,12 +1830,9 @@ void scsi_scan_host(struct Scsi_Host *shost)
 				order_id = shost->max_id - id - 1;
 			else
 				order_id = id;
-			scsi_scan_target(shost, &q, channel, order_id);
+			scsi_scan_target(shost, channel, order_id);
 		}
 	}
-
-	if (q)
-		scsi_free_queue(q);
 }
 
 void scsi_forget_host(struct Scsi_Host *shost)
@@ -1847,7 +1871,7 @@ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
 {
 	struct scsi_device *sdev;
 
-	sdev = scsi_alloc_sdev(shost, NULL, 0, shost->this_id, 0);
+	sdev = scsi_alloc_sdev(shost, 0, shost->this_id, 0);
 	if (sdev) {
 		sdev->borken = 0;
 	}

drivers/scsi/scsi_syms.c

@@ -60,6 +60,8 @@ EXPORT_SYMBOL(scsi_allocate_request);
 EXPORT_SYMBOL(scsi_release_request);
 EXPORT_SYMBOL(scsi_wait_req);
 EXPORT_SYMBOL(scsi_do_req);
+EXPORT_SYMBOL(scsi_get_command);
+EXPORT_SYMBOL(scsi_put_command);
 
 EXPORT_SYMBOL(scsi_report_bus_reset);
 EXPORT_SYMBOL(scsi_block_requests);