ARM: dts: Configure simple-pm-bus for dra7 l4_wkup

We can now probe interconnects with device tree only configuration using
simple-pm-bus and genpd.
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/dra7-l4.dtsi

@@ -4228,7 +4228,10 @@ vpe: vpe@0 {
 };
 
 &l4_wkup {						/* 0x4ae00000 */
-	compatible = "ti,dra7-l4-wkup", "simple-bus";
+	compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkupaon>;
+	clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4ae00000 0x800>,
 	      <0x4ae00800 0x800>,
 	      <0x4ae01000 0x1000>;
@@ -4241,7 +4244,7 @@ &l4_wkup {						/* 0x4ae00000 */
 		 <0x00030000 0x4ae30000 0x010000>;	/* segment 3 */
 
 	segment@0 {					/* 0x4ae00000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -4318,7 +4321,7 @@ scm_wkup: scm_conf@0 {
 	};
 
 	segment@10000 {					/* 0x4ae10000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
@@ -4428,7 +4431,7 @@ target-module@c000 {			/* 0x4ae1c000, ap 11 38.0 */
 	};
 
 	segment@20000 {					/* 0x4ae20000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
@@ -4534,7 +4537,7 @@ target-module@f000 {			/* 0x4ae2f000, ap 32 58.0 */
 	};
 
 	segment@30000 {					/* 0x4ae30000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0000c000 0x0003c000 0x002000>,	/* ap 30 */