Commit 9a853f71 authored by Andrew Vasquez's avatar Andrew Vasquez Committed by James Bottomley

[SCSI] qla2xxx: Add ISP24xx ISR routines.

Add ISP24xx ISR routines.

Add appropriate glue-code for ISP24xx support -- this
included generalizing some of the core handling
routines (qla2x00_async_event() [pull-up retrieval of
mailbox values] and qla2x00_status_entry()].  Fixup
2100/2300 ISRs to handle the new conventions.
Signed-off-by: default avatarAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 2b6c0cee
......@@ -211,6 +211,7 @@ qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
*/
extern irqreturn_t qla2100_intr_handler(int, void *, struct pt_regs *);
extern irqreturn_t qla2300_intr_handler(int, void *, struct pt_regs *);
extern irqreturn_t qla24xx_intr_handler(int, void *, struct pt_regs *);
extern void qla2x00_process_response_queue(struct scsi_qla_host *);
/*
......
......@@ -19,14 +19,17 @@
#include "qla_def.h"
static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
static void qla2x00_async_event(scsi_qla_host_t *, uint32_t);
static void qla2x00_async_event(scsi_qla_host_t *, uint16_t *);
static void qla2x00_process_completed_request(struct scsi_qla_host *, uint32_t);
void qla2x00_process_response_queue(struct scsi_qla_host *);
static void qla2x00_status_entry(scsi_qla_host_t *, sts_entry_t *);
static void qla2x00_status_entry(scsi_qla_host_t *, void *);
static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
static void qla2x00_error_entry(scsi_qla_host_t *, sts_entry_t *);
static void qla2x00_ms_entry(scsi_qla_host_t *, ms_iocb_entry_t *);
void qla24xx_process_response_queue(scsi_qla_host_t *);
static void qla24xx_ms_entry(scsi_qla_host_t *, struct ct_entry_24xx *);
/**
* qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
* @irq:
......@@ -45,7 +48,7 @@ qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
int status;
unsigned long flags;
unsigned long iter;
uint32_t mbx;
uint16_t mb[4];
ha = (scsi_qla_host_t *) dev_id;
if (!ha) {
......@@ -67,17 +70,20 @@ qla2100_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
RD_REG_WORD(&reg->hccr);
/* Get mailbox data. */
mbx = RD_MAILBOX_REG(ha, reg, 0);
if (mbx > 0x3fff && mbx < 0x8000) {
qla2x00_mbx_completion(ha, (uint16_t)mbx);
mb[0] = RD_MAILBOX_REG(ha, reg, 0);
if (mb[0] > 0x3fff && mb[0] < 0x8000) {
qla2x00_mbx_completion(ha, mb[0]);
status |= MBX_INTERRUPT;
} else if (mbx > 0x7fff && mbx < 0xc000) {
qla2x00_async_event(ha, mbx);
} else if (mb[0] > 0x7fff && mb[0] < 0xc000) {
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
qla2x00_async_event(ha, mb);
} else {
/*EMPTY*/
DEBUG2(printk("scsi(%ld): Unrecognized "
"interrupt type (%d)\n",
ha->host_no, mbx));
"interrupt type (%d).\n",
ha->host_no, mb[0]));
}
/* Release mailbox registers. */
WRT_REG_WORD(&reg->semaphore, 0);
......@@ -123,8 +129,8 @@ qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
unsigned long flags;
unsigned long iter;
uint32_t stat;
uint32_t mbx;
uint16_t hccr;
uint16_t mb[4];
ha = (scsi_qla_host_t *) dev_id;
if (!ha) {
......@@ -146,7 +152,7 @@ qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
"Parity error -- HCCR=%x.\n", hccr);
else
qla_printk(KERN_INFO, ha,
"RISC paused -- HCCR=%x\n", hccr);
"RISC paused -- HCCR=%x.\n", hccr);
/*
* Issue a "HARD" reset in order for the RISC
......@@ -160,35 +166,41 @@ qla2300_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
} else if ((stat & HSR_RISC_INT) == 0)
break;
mbx = MSW(stat);
switch (stat & 0xff) {
case 0x13:
qla2x00_process_response_queue(ha);
break;
case 0x1:
case 0x2:
case 0x10:
case 0x11:
qla2x00_mbx_completion(ha, (uint16_t)mbx);
qla2x00_mbx_completion(ha, MSW(stat));
status |= MBX_INTERRUPT;
/* Release mailbox registers. */
WRT_REG_WORD(&reg->semaphore, 0);
break;
case 0x12:
qla2x00_async_event(ha, mbx);
mb[0] = MSW(stat);
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
mb[3] = RD_MAILBOX_REG(ha, reg, 3);
qla2x00_async_event(ha, mb);
break;
case 0x13:
qla2x00_process_response_queue(ha);
break;
case 0x15:
mbx = mbx << 16 | MBA_CMPLT_1_16BIT;
qla2x00_async_event(ha, mbx);
mb[0] = MBA_CMPLT_1_16BIT;
mb[1] = MSW(stat);
qla2x00_async_event(ha, mb);
break;
case 0x16:
mbx = mbx << 16 | MBA_SCSI_COMPLETION;
qla2x00_async_event(ha, mbx);
mb[0] = MBA_SCSI_COMPLETION;
mb[1] = MSW(stat);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
qla2x00_async_event(ha, mb);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d)\n",
"(%d).\n",
ha->host_no, stat & 0xff));
break;
}
......@@ -250,14 +262,14 @@ qla2x00_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0)
/**
* qla2x00_async_event() - Process aynchronous events.
* @ha: SCSI driver HA context
* @mb0: Mailbox0 register
* @mb: Mailbox registers (0 - 3)
*/
static void
qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
{
static char *link_speeds[5] = { "1", "2", "4", "?", "10" };
#define LS_UNKNOWN 2
static char *link_speeds[5] = { "1", "2", "?", "4", "10" };
char *link_speed;
uint16_t mb[4];
uint16_t handle_cnt;
uint16_t cnt;
uint32_t handles[5];
......@@ -267,61 +279,48 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
/* Setup to process RIO completion. */
handle_cnt = 0;
mb[0] = LSW(mbx);
switch (mb[0]) {
case MBA_SCSI_COMPLETION:
if (IS_QLA2100(ha) || IS_QLA2200(ha))
handles[0] = le32_to_cpu(
((uint32_t)(RD_MAILBOX_REG(ha, reg, 2) << 16)) |
RD_MAILBOX_REG(ha, reg, 1));
else
handles[0] = le32_to_cpu(
((uint32_t)(RD_MAILBOX_REG(ha, reg, 2) << 16)) |
MSW(mbx));
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
handle_cnt = 1;
break;
case MBA_CMPLT_1_16BIT:
if (IS_QLA2100(ha) || IS_QLA2200(ha))
handles[0] = (uint32_t)RD_MAILBOX_REG(ha, reg, 1);
else
handles[0] = MSW(mbx);
handles[0] = mb[1];
handle_cnt = 1;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_2_16BIT:
handles[0] = (uint32_t)RD_MAILBOX_REG(ha, reg, 1);
handles[1] = (uint32_t)RD_MAILBOX_REG(ha, reg, 2);
handles[0] = mb[1];
handles[1] = mb[2];
handle_cnt = 2;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_3_16BIT:
handles[0] = (uint32_t)RD_MAILBOX_REG(ha, reg, 1);
handles[1] = (uint32_t)RD_MAILBOX_REG(ha, reg, 2);
handles[2] = (uint32_t)RD_MAILBOX_REG(ha, reg, 3);
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handle_cnt = 3;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_4_16BIT:
handles[0] = (uint32_t)RD_MAILBOX_REG(ha, reg, 1);
handles[1] = (uint32_t)RD_MAILBOX_REG(ha, reg, 2);
handles[2] = (uint32_t)RD_MAILBOX_REG(ha, reg, 3);
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
handle_cnt = 4;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_5_16BIT:
handles[0] = (uint32_t)RD_MAILBOX_REG(ha, reg, 1);
handles[1] = (uint32_t)RD_MAILBOX_REG(ha, reg, 2);
handles[2] = (uint32_t)RD_MAILBOX_REG(ha, reg, 3);
handles[0] = mb[1];
handles[1] = mb[2];
handles[2] = mb[3];
handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
handles[4] = (uint32_t)RD_MAILBOX_REG(ha, reg, 7);
handle_cnt = 5;
mb[0] = MBA_SCSI_COMPLETION;
break;
case MBA_CMPLT_2_32BIT:
handles[0] = le32_to_cpu(
((uint32_t)(RD_MAILBOX_REG(ha, reg, 2) << 16)) |
RD_MAILBOX_REG(ha, reg, 1));
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
handles[1] = le32_to_cpu(
((uint32_t)(RD_MAILBOX_REG(ha, reg, 7) << 16)) |
RD_MAILBOX_REG(ha, reg, 6));
......@@ -358,7 +357,15 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
ha->isp_ops.fw_dump(ha, 1);
if (mb[1] == 0) {
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
if (mb[1] == 0 && mb[2] == 0) {
qla_printk(KERN_ERR, ha,
"Unrecoverable Hardware Error: adapter "
"marked OFFLINE!\n");
ha->flags.online = 0;
} else
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
} else if (mb[1] == 0) {
qla_printk(KERN_INFO, ha,
"Unrecoverable Hardware Error: adapter marked "
"OFFLINE!\n");
......@@ -389,8 +396,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
break;
case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
DEBUG2(printk("scsi(%ld): LIP occured (%x).\n", ha->host_no,
mb[1]));
qla_printk(KERN_INFO, ha, "LIP occured (%x).\n", mb[1]);
......@@ -411,13 +416,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
break;
case MBA_LOOP_UP: /* Loop Up Event */
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
ha->link_data_rate = 0;
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
link_speed = link_speeds[0];
} else {
link_speed = link_speeds[3];
link_speed = link_speeds[LS_UNKNOWN];
if (mb[1] < 5)
link_speed = link_speeds[mb[1]];
ha->link_data_rate = mb[1];
......@@ -435,9 +438,9 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
break;
case MBA_LOOP_DOWN: /* Loop Down Event */
DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN.\n",
ha->host_no));
qla_printk(KERN_INFO, ha, "LOOP DOWN detected.\n");
DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN (%x).\n",
ha->host_no, mb[1]));
qla_printk(KERN_INFO, ha, "LOOP DOWN detected (%x).\n", mb[1]);
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
......@@ -454,8 +457,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
break;
case MBA_LIP_RESET: /* LIP reset occurred */
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
DEBUG2(printk("scsi(%ld): Asynchronous LIP RESET (%x).\n",
ha->host_no, mb[1]));
qla_printk(KERN_INFO, ha,
......@@ -506,8 +507,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
if (IS_QLA2100(ha))
break;
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
DEBUG2(printk("scsi(%ld): Asynchronous Change In Connection "
"received.\n",
ha->host_no));
......@@ -527,16 +526,14 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
break;
case MBA_PORT_UPDATE: /* Port database update */
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
/*
* If a single remote port just logged into (or logged out of)
* us, create a new entry in our rscn fcports list and handle
* the event like an RSCN.
*/
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA6312(ha) &&
!IS_QLA6322(ha) && ha->flags.init_done && mb[1] != 0xffff &&
!IS_QLA6322(ha) && !IS_QLA24XX(ha) && !IS_QLA25XX(ha) &&
ha->flags.init_done && mb[1] != 0xffff &&
((ha->operating_mode == P2P && mb[1] != 0) ||
(ha->operating_mode != P2P && mb[1] !=
SNS_FIRST_LOOP_ID)) && (mb[2] == 6 || mb[2] == 7)) {
......@@ -547,8 +544,9 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
rscn_fcport = qla2x00_alloc_rscn_fcport(ha, GFP_ATOMIC);
if (rscn_fcport) {
DEBUG14(printk("scsi(%ld): Port Update -- "
"creating RSCN fcport %p for %x/%x.\n",
ha->host_no, rscn_fcport, mb[1], mb[2]));
"creating RSCN fcport %p for %x/%x/%x.\n",
ha->host_no, rscn_fcport, mb[1], mb[2],
mb[3]));
rscn_fcport->loop_id = mb[1];
rscn_fcport->d_id.b24 = INVALID_PORT_ID;
......@@ -577,15 +575,16 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
if (atomic_read(&ha->loop_state) != LOOP_DOWN &&
atomic_read(&ha->loop_state) != LOOP_DEAD) {
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE "
"ignored.\n", ha->host_no));
"ignored %04x/%04x/%04x.\n", ha->host_no, mb[1],
mb[2], mb[3]));
break;
}
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE.\n",
ha->host_no));
DEBUG(printk(KERN_INFO
"scsi(%ld): Port database changed %04x %04x.\n",
ha->host_no, mb[1], mb[2]));
"scsi(%ld): Port database changed %04x %04x %04x.\n",
ha->host_no, mb[1], mb[2], mb[3]));
/*
* Mark all devices as missing so we will login again.
......@@ -604,9 +603,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
ha->host_no));
DEBUG(printk(KERN_INFO
......@@ -655,6 +651,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint32_t mbx)
qla2x00_process_response_queue(ha);
break;
case MBA_DISCARD_RND_FRAME:
DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x "
"%04x.\n", ha->host_no, mb[1], mb[2], mb[3]));
break;
}
}
......@@ -801,31 +802,41 @@ qla2x00_process_response_queue(struct scsi_qla_host *ha)
* @pkt: Entry pointer
*/
static void
qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
{
unsigned b, t, l;
srb_t *sp;
fc_port_t *fcport;
struct scsi_cmnd *cp;
sts_entry_t *sts;
struct sts_entry_24xx *sts24;
uint16_t comp_status;
uint16_t scsi_status;
uint8_t lscsi_status;
int32_t resid;
uint8_t sense_sz = 0;
uint16_t rsp_info_len;
uint32_t sense_len, rsp_info_len, resid_len;
uint8_t *rsp_info, *sense_data;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
comp_status = le16_to_cpu(sts24->comp_status);
scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK;
} else {
comp_status = le16_to_cpu(sts->comp_status);
scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
}
/* Fast path completion. */
if (le16_to_cpu(pkt->comp_status) == CS_COMPLETE &&
(le16_to_cpu(pkt->scsi_status) & SS_MASK) == 0) {
qla2x00_process_completed_request(ha, pkt->handle);
if (comp_status == CS_COMPLETE && scsi_status == 0) {
qla2x00_process_completed_request(ha, sts->handle);
return;
}
/* Validate handle. */
if (pkt->handle < MAX_OUTSTANDING_COMMANDS) {
sp = ha->outstanding_cmds[pkt->handle];
ha->outstanding_cmds[pkt->handle] = NULL;
if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
sp = ha->outstanding_cmds[sts->handle];
ha->outstanding_cmds[sts->handle] = NULL;
} else
sp = NULL;
......@@ -844,40 +855,49 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
if (cp == NULL) {
DEBUG2(printk("scsi(%ld): Command already returned back to OS "
"pkt->handle=%d sp=%p sp->state:%d\n",
ha->host_no, pkt->handle, sp, sp->state));
ha->host_no, sts->handle, sp, sp->state));
qla_printk(KERN_WARNING, ha,
"Command is NULL: already returned to OS (sp=%p)\n", sp);
return;
}
comp_status = le16_to_cpu(pkt->comp_status);
/* Mask of reserved bits 12-15, before we examine the scsi status */
scsi_status = le16_to_cpu(pkt->scsi_status) & SS_MASK;
lscsi_status = scsi_status & STATUS_MASK;
CMD_ENTRY_STATUS(cp) = pkt->entry_status;
lscsi_status = scsi_status & STATUS_MASK;
CMD_ENTRY_STATUS(cp) = sts->entry_status;
CMD_COMPL_STATUS(cp) = comp_status;
CMD_SCSI_STATUS(cp) = scsi_status;
/* Generate LU queue on cntrl, target, LUN */
b = cp->device->channel;
t = cp->device->id;
l = cp->device->lun,
fcport = sp->fcport;
sense_len = rsp_info_len = resid_len = 0;
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
sense_len = le32_to_cpu(sts24->sense_len);
rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
resid_len = le32_to_cpu(sts24->rsp_residual_count);
rsp_info = sts24->data;
sense_data = sts24->data;
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
} else {
sense_len = le16_to_cpu(sts->req_sense_length);
rsp_info_len = le16_to_cpu(sts->rsp_info_len);
resid_len = le32_to_cpu(sts->residual_length);
rsp_info = sts->rsp_info;
sense_data = sts->req_sense_data;
}
/* Check for any FCP transport errors. */
if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) {
rsp_info_len = le16_to_cpu(pkt->rsp_info_len);
if (rsp_info_len > 3 && pkt->rsp_info[3]) {
/* Sense data lies beyond any FCP RESPONSE data. */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
sense_data += rsp_info_len;
if (rsp_info_len > 3 && rsp_info[3]) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol "
"failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..."
"retrying command\n", ha->host_no, b, t, l,
rsp_info_len, pkt->rsp_info[0], pkt->rsp_info[1],
pkt->rsp_info[2], pkt->rsp_info[3],
pkt->rsp_info[4], pkt->rsp_info[5],
pkt->rsp_info[6], pkt->rsp_info[7]));
"retrying command\n", ha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, rsp_info_len, rsp_info[0],
rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4],
rsp_info[5], rsp_info[6], rsp_info[7]));
cp->result = DID_BUS_BUSY << 16;
qla2x00_sp_compl(ha, sp);
......@@ -895,7 +915,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
break;
}
if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) {
resid = le32_to_cpu(pkt->residual_length);
resid = resid_len;
cp->resid = resid;
CMD_RESID_LEN(cp) = resid;
}
......@@ -904,39 +924,34 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
if (lscsi_status != SS_CHECK_CONDITION)
break;
/*
* Copy Sense Data into sense buffer
*/
/* Copy Sense Data into sense buffer. */
memset(cp->sense_buffer, 0, sizeof(cp->sense_buffer));
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
if (le16_to_cpu(pkt->req_sense_length) <
sizeof(cp->sense_buffer))
sense_sz = le16_to_cpu(pkt->req_sense_length);
else
sense_sz = sizeof(cp->sense_buffer);
if (sense_len >= sizeof(cp->sense_buffer))
sense_len = sizeof(cp->sense_buffer);
CMD_ACTUAL_SNSLEN(cp) = sense_sz;
sp->request_sense_length = sense_sz;
CMD_ACTUAL_SNSLEN(cp) = sense_len;
sp->request_sense_length = sense_len;
sp->request_sense_ptr = cp->sense_buffer;
if (sp->request_sense_length > 32)
sense_sz = 32;
sense_len = 32;
memcpy(cp->sense_buffer, pkt->req_sense_data, sense_sz);
memcpy(cp->sense_buffer, sense_data, sense_len);
sp->request_sense_ptr += sense_sz;
sp->request_sense_length -= sense_sz;
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
ha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, "
"scsi(%ld:%d:%d:%d) cmd=%p pid=%ld\n",
__func__, ha->host_no, b, t, l, cp,
cp->serial_number));
if (sense_sz)
"scsi(%ld:%d:%d:%d) cmd=%p pid=%ld\n", __func__,
ha->host_no, cp->device->channel, cp->device->id,
cp->device->lun, cp, cp->serial_number));
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
break;
......@@ -944,9 +959,10 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
case CS_DATA_UNDERRUN:
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d) UNDERRUN status detected 0x%x-0x%x.\n",
ha->host_no, t, l, comp_status, scsi_status));
ha->host_no, cp->device->id, cp->device->lun, comp_status,
scsi_status));
resid = le32_to_cpu(pkt->residual_length);
resid = resid_len;
if (scsi_status & SS_RESIDUAL_UNDER) {
cp->resid = resid;
CMD_RESID_LEN(cp) = resid;
......@@ -968,31 +984,30 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
if (le16_to_cpu(pkt->req_sense_length) <
sizeof(cp->sense_buffer))
sense_sz = le16_to_cpu(pkt->req_sense_length);
else
sense_sz = sizeof(cp->sense_buffer);
if (sense_len >= sizeof(cp->sense_buffer))
sense_len = sizeof(cp->sense_buffer);
CMD_ACTUAL_SNSLEN(cp) = sense_sz;
sp->request_sense_length = sense_sz;
CMD_ACTUAL_SNSLEN(cp) = sense_len;
sp->request_sense_length = sense_len;
sp->request_sense_ptr = cp->sense_buffer;
if (sp->request_sense_length > 32)
sense_sz = 32;
sense_len = 32;
memcpy(cp->sense_buffer, pkt->req_sense_data, sense_sz);
memcpy(cp->sense_buffer, sense_data, sense_len);
sp->request_sense_ptr += sense_sz;
sp->request_sense_length -= sense_sz;
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
ha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, "
"scsi(%ld:%d:%d:%d) cmd=%p pid=%ld\n",
__func__, ha->host_no, b, t, l, cp,
__func__, ha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, cp,
cp->serial_number));
if (sense_sz)
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
} else {
......@@ -1004,8 +1019,9 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
if (!(scsi_status & SS_RESIDUAL_UNDER)) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
"frame(s) detected (%x of %x bytes)..."
"retrying command.\n",
ha->host_no, b, t, l, resid,
"retrying command.\n", ha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, resid,
cp->request_bufflen));
cp->result = DID_BUS_BUSY << 16;
......@@ -1018,8 +1034,9 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): Mid-layer underflow "
"detected (%x of %x bytes)...returning "
"error status.\n",
ha->host_no, b, t, l, resid,
"error status.\n", ha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, resid,
cp->request_bufflen);
cp->result = DID_ERROR << 16;
......@@ -1034,7 +1051,8 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
case CS_DATA_OVERRUN:
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n",
ha->host_no, t, l, comp_status, scsi_status));
ha->host_no, cp->device->id, cp->device->lun, comp_status,
scsi_status));
DEBUG2(printk(KERN_INFO
"CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3],
......@@ -1042,8 +1060,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
DEBUG2(printk(KERN_INFO
"PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR "
"status!\n",
cp->serial_number, cp->request_bufflen,
le32_to_cpu(pkt->residual_length)));
cp->serial_number, cp->request_bufflen, resid_len));
cp->result = DID_ERROR << 16;
break;
......@@ -1060,7 +1077,8 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
*/
DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down "
"pid=%ld, compl status=0x%x, port state=0x%x\n",
ha->host_no, t, l, cp->serial_number, comp_status,
ha->host_no, cp->device->id, cp->device->lun,
cp->serial_number, comp_status,
atomic_read(&fcport->state)));
cp->result = DID_BUS_BUSY << 16;
......@@ -1091,17 +1109,25 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
break;
case CS_TIMEOUT:
cp->result = DID_BUS_BUSY << 16;
if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected "
"0x%x-0x%x\n", ha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status,
scsi_status));
break;
}
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x "
"sflags=%x.\n", ha->host_no, b, t, l, comp_status,
scsi_status, le16_to_cpu(pkt->status_flags)));
cp->result = DID_BUS_BUSY << 16;
"sflags=%x.\n", ha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status, scsi_status,
le16_to_cpu(sts->status_flags)));
/* Check to see if logout occurred */
if ((le16_to_cpu(pkt->status_flags) & SF_LOGOUT_SENT)) {
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
qla2x00_mark_device_lost(ha, fcport, 1);
}
break;
case CS_QUEUE_FULL:
......@@ -1117,8 +1143,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
default:
DEBUG3(printk("scsi(%ld): Error detected (unknown status) "
"0x%x-0x%x.\n",
ha->host_no, comp_status, scsi_status));
"0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status));
qla_printk(KERN_INFO, ha,
"Unknown status detected 0x%x-0x%x.\n",
comp_status, scsi_status);
......@@ -1166,6 +1191,8 @@ qla2x00_status_cont_entry(scsi_qla_host_t *ha, sts_cont_entry_t *pkt)
}
/* Move sense data. */
if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
host_to_fcp_swap(pkt->data, sizeof(pkt->data));
memcpy(sp->request_sense_ptr, pkt->data, sense_sz);
DEBUG5(qla2x00_dump_buffer(sp->request_sense_ptr, sense_sz));
......@@ -1186,7 +1213,7 @@ qla2x00_status_cont_entry(scsi_qla_host_t *ha, sts_cont_entry_t *pkt)
* @pkt: Entry pointer
*/
static void
qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
{
srb_t *sp;
......@@ -1228,15 +1255,15 @@ qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
}
qla2x00_sp_compl(ha, sp);
} else if (pkt->entry_type == COMMAND_A64_TYPE ||
pkt->entry_type == COMMAND_TYPE) {
} else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type ==
COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) {
DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n",
ha->host_no));
qla_printk(KERN_WARNING, ha,
"Error entry - invalid handle\n");
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
if (ha->dpc_wait && !ha->dpc_active)
if (ha->dpc_wait && !ha->dpc_active)
up(ha->dpc_wait);
}
}
......@@ -1247,7 +1274,7 @@ qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt)
* @index: Response queue out pointer
*/
static void
qla2x00_ms_entry(scsi_qla_host_t *ha, ms_iocb_entry_t *pkt)
qla2x00_ms_entry(scsi_qla_host_t *ha, ms_iocb_entry_t *pkt)
{
srb_t *sp;
......@@ -1277,3 +1304,230 @@ qla2x00_ms_entry(scsi_qla_host_t *ha, ms_iocb_entry_t *pkt)
qla2x00_sp_compl(ha, sp);
}
/**
* qla24xx_mbx_completion() - Process mailbox command completions.
* @ha: SCSI driver HA context
* @mb0: Mailbox0 register
*/
static void
qla24xx_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0)
{
uint16_t cnt;
uint16_t __iomem *wptr;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
/* Load return mailbox registers. */
ha->flags.mbox_int = 1;
ha->mailbox_out[0] = mb0;
wptr = (uint16_t __iomem *)&reg->mailbox1;
for (cnt = 1; cnt < ha->mbx_count; cnt++) {
ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
wptr++;
}
if (ha->mcp) {
DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n",
__func__, ha->host_no, ha->mcp->mb[0]));
} else {
DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
__func__, ha->host_no));
}
}
/**
* qla24xx_process_response_queue() - Process response queue entries.
* @ha: SCSI driver HA context
*/
void
qla24xx_process_response_queue(struct scsi_qla_host *ha)
{
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
struct sts_entry_24xx *pkt;
if (!ha->flags.online)
return;
while (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) {
pkt = (struct sts_entry_24xx *)ha->response_ring_ptr;
ha->rsp_ring_index++;
if (ha->rsp_ring_index == ha->response_q_length) {
ha->rsp_ring_index = 0;
ha->response_ring_ptr = ha->response_ring;
} else {
ha->response_ring_ptr++;
}
if (pkt->entry_status != 0) {
DEBUG3(printk(KERN_INFO
"scsi(%ld): Process error entry.\n", ha->host_no));
//FIXME
qla2x00_error_entry(ha, (sts_entry_t *) pkt);
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
continue;
}
switch (pkt->entry_type) {
case STATUS_TYPE:
qla2x00_status_entry(ha, pkt);
break;
case STATUS_CONT_TYPE:
qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt);
break;
case MS_IOCB_TYPE:
qla24xx_ms_entry(ha, (struct ct_entry_24xx *)pkt);
break;
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
"scsi(%ld): Received unknown response pkt type %x "
"entry status=%x.\n",
ha->host_no, pkt->entry_type, pkt->entry_status));
break;
}
((response_t *)pkt)->signature = RESPONSE_PROCESSED;
wmb();
}
/* Adjust ring index */
WRT_REG_DWORD(&reg->rsp_q_out, ha->rsp_ring_index);
}
/**
* qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
* @irq:
* @dev_id: SCSI driver HA context
* @regs:
*
* Called by system whenever the host adapter generates an interrupt.
*
* Returns handled flag.
*/
irqreturn_t
qla24xx_intr_handler(int irq, void *dev_id, struct pt_regs *regs)
{
scsi_qla_host_t *ha;
struct device_reg_24xx __iomem *reg;
int status;
unsigned long flags;
unsigned long iter;
uint32_t stat;
uint32_t hccr;
uint16_t mb[4];
ha = (scsi_qla_host_t *) dev_id;
if (!ha) {
printk(KERN_INFO
"%s(): NULL host pointer\n", __func__);
return IRQ_NONE;
}
reg = &ha->iobase->isp24;
status = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(&reg->host_status);
if (stat & HSRX_RISC_PAUSED) {
hccr = RD_REG_DWORD(&reg->hccr);
qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
"Dumping firmware!\n", hccr);
qla24xx_fw_dump(ha, 1);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
break;
} else if ((stat & HSRX_RISC_INT) == 0)
break;
switch (stat & 0xff) {
case 0x1:
case 0x2:
case 0x10:
case 0x11:
qla24xx_mbx_completion(ha, MSW(stat));
status |= MBX_INTERRUPT;
break;
case 0x12:
mb[0] = MSW(stat);
mb[1] = RD_REG_WORD(&reg->mailbox1);
mb[2] = RD_REG_WORD(&reg->mailbox2);
mb[3] = RD_REG_WORD(&reg->mailbox3);
qla2x00_async_event(ha, mb);
break;
case 0x13:
qla24xx_process_response_queue(ha);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
ha->host_no, stat & 0xff));
break;
}
WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
RD_REG_DWORD_RELAXED(&reg->hccr);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
spin_lock_irqsave(&ha->mbx_reg_lock, flags);
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
up(&ha->mbx_intr_sem);
spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
return IRQ_HANDLED;
}
/**
* qla24xx_ms_entry() - Process a Management Server entry.
* @ha: SCSI driver HA context
* @index: Response queue out pointer
*/
static void
qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt)
{
srb_t *sp;
DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
__func__, ha->host_no, pkt, pkt->handle));
DEBUG9(printk("%s: ct pkt dump:\n", __func__);)
DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx));)
/* Validate handle. */
if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
sp = ha->outstanding_cmds[pkt->handle];
else
sp = NULL;
if (sp == NULL) {
DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n",
ha->host_no));
DEBUG10(printk("scsi(%ld): MS entry - invalid handle\n",
ha->host_no));
qla_printk(KERN_WARNING, ha, "MS entry - invalid handle %d\n",
pkt->handle);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
return;
}
CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->comp_status);
CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status;
/* Free outstanding command slot. */
ha->outstanding_cmds[pkt->handle] = NULL;
qla2x00_sp_compl(ha, sp);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment