net: bcmgenet: use the new fixed PHY helpers

of_phy_connect_fixed_link() is becoming obsolete, and also required
platform code to register the fixed PHYs at the specified addresses for
those to be usable. Get rid of it and use the new of_phy_is_fixed_link()
plus of_phy_register_fixed_link() helpers to transition over the new
scheme.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -298,6 +298,7 @@ int bcmgenet_mii_config(struct net_device *dev)
 static int bcmgenet_mii_probe(struct net_device *dev)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct device_node *dn = priv->pdev->dev.of_node;
 	struct phy_device *phydev;
 	unsigned int phy_flags;
 	int ret;
@@ -307,15 +308,19 @@ static int bcmgenet_mii_probe(struct net_device *dev)
 		return 0;
 	}
 
-	if (priv->phy_dn)
-		phydev = of_phy_connect(dev, priv->phy_dn,
-					bcmgenet_mii_setup, 0,
-					priv->phy_interface);
-	else
-		phydev = of_phy_connect_fixed_link(dev,
-					bcmgenet_mii_setup,
-					priv->phy_interface);
+	/* In the case of a fixed PHY, the DT node associated
+	 * to the PHY is the Ethernet MAC DT node.
+	 */
+	if (of_phy_is_fixed_link(dn)) {
+		ret = of_phy_register_fixed_link(dn);
+		if (ret)
+			return ret;
 
+		priv->phy_dn = dn;
+	}
+
+	phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, 0,
+				priv->phy_interface);
 	if (!phydev) {
 		pr_err("could not attach to PHY\n");
 		return -ENODEV;