Commit 9b379605 authored by James Smart's avatar James Smart Committed by James Bottomley

[SCSI] lpfc 8.2.6 : PCI Parity and EEH handling fixes

PCI Parity and EEH handling Fixes:
- Under a PCI Data Parity Error, remove a completion routine callback that
  was on a command that we had already failed and released.
- Under PCI parity error, we were not reinstalling the interrupt handler
  in the slot_reset callback, so we never became functional again.
Signed-off-by: default avatarJames Smart <james.smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 58da1ffb
......@@ -2371,6 +2371,7 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
struct lpfc_sli *psli = &phba->sli;
int error, retval;
dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
if (pci_enable_device_mem(pdev)) {
......@@ -2385,6 +2386,36 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Enable configured interrupt method */
phba->intr_type = NONE;
if (phba->cfg_use_msi == 2) {
error = lpfc_enable_msix(phba);
if (!error)
phba->intr_type = MSIX;
}
/* Fallback to MSI if MSI-X initialization failed */
if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) {
retval = pci_enable_msi(phba->pcidev);
if (!retval)
phba->intr_type = MSI;
else
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0470 Enable MSI failed, continuing "
"with IRQ\n");
}
/* MSI-X is the only case the doesn't need to call request_irq */
if (phba->intr_type != MSIX) {
retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (retval) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0471 Enable interrupt handler "
"failed\n");
} else if (phba->intr_type != MSI)
phba->intr_type = INTx;
}
/* Take device offline; this will perform cleanup */
lpfc_offline(phba);
......
......@@ -3634,8 +3634,7 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
* If the iocb is not found in Firmware queue the iocb
* might have completed already. Do not free it again.
*/
if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
(irsp->un.ulpWord[4] == IOERR_NO_XRI)) {
if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
spin_unlock_irq(&phba->hbalock);
lpfc_sli_release_iocbq(phba, cmdiocb);
return;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment