Commit 9b9ade6b authored by Yulia Vilensky's avatar Yulia Vilensky Committed by Anton Vorontsov

ds2782_battery: Add support for ds2786 battery gas gauge

Signed-off-by: default avatarYulia Vilensky <vilensky@compulab.co.il>
Signed-off-by: default avatarMike Rapoport <mike@compulab.co.il>
Signed-off-by: default avatarAnton Vorontsov <cbouatmailru@gmail.com>
parent 8ef1bb53
...@@ -65,10 +65,10 @@ config BATTERY_DS2760 ...@@ -65,10 +65,10 @@ config BATTERY_DS2760
Say Y here to enable support for batteries with ds2760 chip. Say Y here to enable support for batteries with ds2760 chip.
config BATTERY_DS2782 config BATTERY_DS2782
tristate "DS2782 standalone gas-gauge" tristate "DS2782/DS2786 standalone gas-gauge"
depends on I2C depends on I2C
help help
Say Y here to enable support for the DS2782 standalone battery Say Y here to enable support for the DS2782/DS2786 standalone battery
gas-gauge. gas-gauge.
config BATTERY_PMU config BATTERY_PMU
......
...@@ -5,6 +5,8 @@ ...@@ -5,6 +5,8 @@
* *
* Author: Ryan Mallon <ryan@bluewatersys.com> * Author: Ryan Mallon <ryan@bluewatersys.com>
* *
* DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
...@@ -20,12 +22,13 @@ ...@@ -20,12 +22,13 @@
#include <linux/idr.h> #include <linux/idr.h>
#include <linux/power_supply.h> #include <linux/power_supply.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/ds2782_battery.h>
#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */ #define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
#define DS2782_REG_VOLT_MSB 0x0c #define DS278x_REG_VOLT_MSB 0x0c
#define DS2782_REG_TEMP_MSB 0x0a #define DS278x_REG_TEMP_MSB 0x0a
#define DS2782_REG_CURRENT_MSB 0x0e #define DS278x_REG_CURRENT_MSB 0x0e
/* EEPROM Block */ /* EEPROM Block */
#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */ #define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
...@@ -33,18 +36,33 @@ ...@@ -33,18 +36,33 @@
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */ /* Current unit measurement in uA for a 1 milli-ohm sense resistor */
#define DS2782_CURRENT_UNITS 1563 #define DS2782_CURRENT_UNITS 1563
#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery) #define DS2786_REG_RARC 0x02 /* Remaining active relative capacity */
#define DS2786_CURRENT_UNITS 25
struct ds278x_info;
struct ds278x_battery_ops {
int (*get_current)(struct ds278x_info *info, int *current_uA);
int (*get_voltage)(struct ds278x_info *info, int *voltage_uA);
int (*get_capacity)(struct ds278x_info *info, int *capacity_uA);
};
#define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
struct ds2782_info { struct ds278x_info {
struct i2c_client *client; struct i2c_client *client;
struct power_supply battery; struct power_supply battery;
struct ds278x_battery_ops *ops;
int id; int id;
int rsns;
}; };
static DEFINE_IDR(battery_id); static DEFINE_IDR(battery_id);
static DEFINE_MUTEX(battery_lock); static DEFINE_MUTEX(battery_lock);
static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val)
{ {
int ret; int ret;
...@@ -58,7 +76,7 @@ static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val) ...@@ -58,7 +76,7 @@ static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
return 0; return 0;
} }
static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb,
s16 *val) s16 *val)
{ {
int ret; int ret;
...@@ -73,7 +91,7 @@ static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb, ...@@ -73,7 +91,7 @@ static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
return 0; return 0;
} }
static int ds2782_get_temp(struct ds2782_info *info, int *temp) static int ds278x_get_temp(struct ds278x_info *info, int *temp)
{ {
s16 raw; s16 raw;
int err; int err;
...@@ -84,14 +102,14 @@ static int ds2782_get_temp(struct ds2782_info *info, int *temp) ...@@ -84,14 +102,14 @@ static int ds2782_get_temp(struct ds2782_info *info, int *temp)
* celsius. The temperature value is stored as a 10 bit number, plus * celsius. The temperature value is stored as a 10 bit number, plus
* sign in the upper bits of a 16 bit register. * sign in the upper bits of a 16 bit register.
*/ */
err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw); err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw);
if (err) if (err)
return err; return err;
*temp = ((raw / 32) * 125) / 100; *temp = ((raw / 32) * 125) / 100;
return 0; return 0;
} }
static int ds2782_get_current(struct ds2782_info *info, int *current_uA) static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
{ {
int sense_res; int sense_res;
int err; int err;
...@@ -102,7 +120,7 @@ static int ds2782_get_current(struct ds2782_info *info, int *current_uA) ...@@ -102,7 +120,7 @@ static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
* The units of measurement for current are dependent on the value of * The units of measurement for current are dependent on the value of
* the sense resistor. * the sense resistor.
*/ */
err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw); err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
if (err) if (err)
return err; return err;
if (sense_res_raw == 0) { if (sense_res_raw == 0) {
...@@ -113,14 +131,14 @@ static int ds2782_get_current(struct ds2782_info *info, int *current_uA) ...@@ -113,14 +131,14 @@ static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n", dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
sense_res); sense_res);
err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw); err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
if (err) if (err)
return err; return err;
*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res); *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
return 0; return 0;
} }
static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uA)
{ {
s16 raw; s16 raw;
int err; int err;
...@@ -129,36 +147,77 @@ static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA) ...@@ -129,36 +147,77 @@ static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
* Voltage is measured in units of 4.88mV. The voltage is stored as * Voltage is measured in units of 4.88mV. The voltage is stored as
* a 10-bit number plus sign, in the upper bits of a 16-bit register * a 10-bit number plus sign, in the upper bits of a 16-bit register
*/ */
err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw); err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
if (err) if (err)
return err; return err;
*voltage_uA = (raw / 32) * 4800; *voltage_uA = (raw / 32) * 4800;
return 0; return 0;
} }
static int ds2782_get_capacity(struct ds2782_info *info, int *capacity) static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
{ {
int err; int err;
u8 raw; u8 raw;
err = ds2782_read_reg(info, DS2782_REG_RARC, &raw); err = ds278x_read_reg(info, DS2782_REG_RARC, &raw);
if (err) if (err)
return err; return err;
*capacity = raw; *capacity = raw;
return raw; return raw;
} }
static int ds2782_get_status(struct ds2782_info *info, int *status) static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
{
int err;
s16 raw;
err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
if (err)
return err;
*current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns);
return 0;
}
static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uA)
{
s16 raw;
int err;
/*
* Voltage is measured in units of 1.22mV. The voltage is stored as
* a 10-bit number plus sign, in the upper bits of a 16-bit register
*/
err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
if (err)
return err;
*voltage_uA = (raw / 8) * 1220;
return 0;
}
static int ds2786_get_capacity(struct ds278x_info *info, int *capacity)
{
int err;
u8 raw;
err = ds278x_read_reg(info, DS2786_REG_RARC, &raw);
if (err)
return err;
/* Relative capacity is displayed with resolution 0.5 % */
*capacity = raw/2 ;
return 0;
}
static int ds278x_get_status(struct ds278x_info *info, int *status)
{ {
int err; int err;
int current_uA; int current_uA;
int capacity; int capacity;
err = ds2782_get_current(info, &current_uA); err = info->ops->get_current(info, &current_uA);
if (err) if (err)
return err; return err;
err = ds2782_get_capacity(info, &capacity); err = info->ops->get_capacity(info, &capacity);
if (err) if (err)
return err; return err;
...@@ -174,32 +233,32 @@ static int ds2782_get_status(struct ds2782_info *info, int *status) ...@@ -174,32 +233,32 @@ static int ds2782_get_status(struct ds2782_info *info, int *status)
return 0; return 0;
} }
static int ds2782_battery_get_property(struct power_supply *psy, static int ds278x_battery_get_property(struct power_supply *psy,
enum power_supply_property prop, enum power_supply_property prop,
union power_supply_propval *val) union power_supply_propval *val)
{ {
struct ds2782_info *info = to_ds2782_info(psy); struct ds278x_info *info = to_ds278x_info(psy);
int ret; int ret;
switch (prop) { switch (prop) {
case POWER_SUPPLY_PROP_STATUS: case POWER_SUPPLY_PROP_STATUS:
ret = ds2782_get_status(info, &val->intval); ret = ds278x_get_status(info, &val->intval);
break; break;
case POWER_SUPPLY_PROP_CAPACITY: case POWER_SUPPLY_PROP_CAPACITY:
ret = ds2782_get_capacity(info, &val->intval); ret = info->ops->get_capacity(info, &val->intval);
break; break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW: case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = ds2782_get_voltage(info, &val->intval); ret = info->ops->get_voltage(info, &val->intval);
break; break;
case POWER_SUPPLY_PROP_CURRENT_NOW: case POWER_SUPPLY_PROP_CURRENT_NOW:
ret = ds2782_get_current(info, &val->intval); ret = info->ops->get_current(info, &val->intval);
break; break;
case POWER_SUPPLY_PROP_TEMP: case POWER_SUPPLY_PROP_TEMP:
ret = ds2782_get_temp(info, &val->intval); ret = ds278x_get_temp(info, &val->intval);
break; break;
default: default:
...@@ -209,7 +268,7 @@ static int ds2782_battery_get_property(struct power_supply *psy, ...@@ -209,7 +268,7 @@ static int ds2782_battery_get_property(struct power_supply *psy,
return ret; return ret;
} }
static enum power_supply_property ds2782_battery_props[] = { static enum power_supply_property ds278x_battery_props[] = {
POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_VOLTAGE_NOW,
...@@ -217,18 +276,18 @@ static enum power_supply_property ds2782_battery_props[] = { ...@@ -217,18 +276,18 @@ static enum power_supply_property ds2782_battery_props[] = {
POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP,
}; };
static void ds2782_power_supply_init(struct power_supply *battery) static void ds278x_power_supply_init(struct power_supply *battery)
{ {
battery->type = POWER_SUPPLY_TYPE_BATTERY; battery->type = POWER_SUPPLY_TYPE_BATTERY;
battery->properties = ds2782_battery_props; battery->properties = ds278x_battery_props;
battery->num_properties = ARRAY_SIZE(ds2782_battery_props); battery->num_properties = ARRAY_SIZE(ds278x_battery_props);
battery->get_property = ds2782_battery_get_property; battery->get_property = ds278x_battery_get_property;
battery->external_power_changed = NULL; battery->external_power_changed = NULL;
} }
static int ds2782_battery_remove(struct i2c_client *client) static int ds278x_battery_remove(struct i2c_client *client)
{ {
struct ds2782_info *info = i2c_get_clientdata(client); struct ds278x_info *info = i2c_get_clientdata(client);
power_supply_unregister(&info->battery); power_supply_unregister(&info->battery);
kfree(info->battery.name); kfree(info->battery.name);
...@@ -241,13 +300,36 @@ static int ds2782_battery_remove(struct i2c_client *client) ...@@ -241,13 +300,36 @@ static int ds2782_battery_remove(struct i2c_client *client)
return 0; return 0;
} }
static int ds2782_battery_probe(struct i2c_client *client, static struct ds278x_battery_ops ds278x_ops[] = {
[0] = {
.get_current = ds2782_get_current,
.get_voltage = ds2782_get_voltage,
.get_capacity = ds2782_get_capacity,
},
[1] = {
.get_current = ds2786_get_current,
.get_voltage = ds2786_get_voltage,
.get_capacity = ds2786_get_capacity,
}
};
static int ds278x_battery_probe(struct i2c_client *client,
const struct i2c_device_id *id) const struct i2c_device_id *id)
{ {
struct ds2782_info *info; struct ds278x_platform_data *pdata = client->dev.platform_data;
struct ds278x_info *info;
int ret; int ret;
int num; int num;
/*
* ds2786 should have the sense resistor value set
* in the platform data
*/
if (id->driver_data == 1 && !pdata) {
dev_err(&client->dev, "missing platform data for ds2786\n");
return -EINVAL;
}
/* Get an ID for this battery */ /* Get an ID for this battery */
ret = idr_pre_get(&battery_id, GFP_KERNEL); ret = idr_pre_get(&battery_id, GFP_KERNEL);
if (ret == 0) { if (ret == 0) {
...@@ -267,15 +349,20 @@ static int ds2782_battery_probe(struct i2c_client *client, ...@@ -267,15 +349,20 @@ static int ds2782_battery_probe(struct i2c_client *client,
goto fail_info; goto fail_info;
} }
info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num); info->battery.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num);
if (!info->battery.name) { if (!info->battery.name) {
ret = -ENOMEM; ret = -ENOMEM;
goto fail_name; goto fail_name;
} }
if (id->driver_data == 1)
info->rsns = pdata->rsns;
i2c_set_clientdata(client, info); i2c_set_clientdata(client, info);
info->client = client; info->client = client;
ds2782_power_supply_init(&info->battery); info->id = num;
info->ops = &ds278x_ops[id->driver_data];
ds278x_power_supply_init(&info->battery);
ret = power_supply_register(&client->dev, &info->battery); ret = power_supply_register(&client->dev, &info->battery);
if (ret) { if (ret) {
...@@ -297,31 +384,32 @@ static int ds2782_battery_probe(struct i2c_client *client, ...@@ -297,31 +384,32 @@ static int ds2782_battery_probe(struct i2c_client *client,
return ret; return ret;
} }
static const struct i2c_device_id ds2782_id[] = { static const struct i2c_device_id ds278x_id[] = {
{"ds2782", 0}, {"ds2782", 0},
{"ds2786", 1},
{}, {},
}; };
static struct i2c_driver ds2782_battery_driver = { static struct i2c_driver ds278x_battery_driver = {
.driver = { .driver = {
.name = "ds2782-battery", .name = "ds2782-battery",
}, },
.probe = ds2782_battery_probe, .probe = ds278x_battery_probe,
.remove = ds2782_battery_remove, .remove = ds278x_battery_remove,
.id_table = ds2782_id, .id_table = ds278x_id,
}; };
static int __init ds2782_init(void) static int __init ds278x_init(void)
{ {
return i2c_add_driver(&ds2782_battery_driver); return i2c_add_driver(&ds278x_battery_driver);
} }
module_init(ds2782_init); module_init(ds278x_init);
static void __exit ds2782_exit(void) static void __exit ds278x_exit(void)
{ {
i2c_del_driver(&ds2782_battery_driver); i2c_del_driver(&ds278x_battery_driver);
} }
module_exit(ds2782_exit); module_exit(ds278x_exit);
MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>"); MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
......
#ifndef __LINUX_DS2782_BATTERY_H
#define __LINUX_DS2782_BATTERY_H
struct ds278x_platform_data {
int rsns;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment