[TIGON3]: Merge to version 1.1
- When not low-power, only set GPIO enables in lclctrl on 5700 chips - Follow all writes to foo DMAC_MODE with a readback and udelay(40) - Be explicit about the fact that the driver disables wake-on-lan by default and how the user may enable it - A few NIC_SRAM_DATA_CFG_foo bits were wrong or missing - Clock control programming for some chips when going to low power mode was wrong. - Bump driver version/reldata for release - PCI write posting fixes * Sanitize every PCI write that requires a delay afterwards by doing a dummy read back from the register. * Handle the interesting case of this when doing a core-clock reset by using PCI config space indirect writes to GRC_MISC_CFG since we cannot do an MMIO read back from the chip during this reset event because it clears MMIO space enable in PCI_CONFIG * Add a new tg3_flag TG3_FLAG_MBOX_WRITE_REORDER which is set on chipsets that may violate PCI write ordering rules, when set we always read back from tx/rx ring mailbox registers after a write to guarentee the writes appear to the chip in order. - Make sure to always enable AS_MASTER bits when necessary - PHY reset fixes * Always reset PHY on init, for every chip revision * Program 5703 specific PHY stuff after the reset * Always enable Ethernet@WireSpeed after that reset * Always set ADVERTISE_PAUSE_CAP in initial adv reg.
Showing
Please register or sign in to comment