Commit 9c1712d5 authored by Frank Wang's avatar Frank Wang Committed by Kishon Vijay Abraham I

dt-bindings: phy-rockchip-inno-usb2: add otg-mux interrupt

Add otg-mux property to support multiplexed interrupt in otg-port
on some Rockchip SoC (e.g RV1108).
Signed-off-by: default avatarFrank Wang <frank.wang@rock-chips.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 0983e2ab
...@@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the phy provides. ...@@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the phy provides.
Required properties (port (child) node): Required properties (port (child) node):
- #phy-cells : must be 0. See ./phy-bindings.txt for details. - #phy-cells : must be 0. See ./phy-bindings.txt for details.
- interrupts : specify an interrupt for each entry in interrupt-names. - interrupts : specify an interrupt for each entry in interrupt-names.
- interrupt-names : a list which shall be the following entries: - interrupt-names : a list which should be one of the following cases:
Regular case:
* "otg-id" : for the otg id interrupt. * "otg-id" : for the otg id interrupt.
* "otg-bvalid" : for the otg vbus interrupt. * "otg-bvalid" : for the otg vbus interrupt.
* "linestate" : for the host/otg linestate interrupt. * "linestate" : for the host/otg linestate interrupt.
Some SoCs use one interrupt with the above muxed together, so for these
* "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate
to one.
Optional properties: Optional properties:
- phy-supply : phandle to a regulator that provides power to VBUS. - phy-supply : phandle to a regulator that provides power to VBUS.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment