Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (35 commits)
  Add support for the Davicom DM9161A PHY
  sky2: only disable 88e8056 on some boards
  sky2: 88e8071 support not ready
  skge: crash on shutdown/suspend
  sky2: fix oops on shutdown
  mlx4: don't use deprecated IRQ flags
  netxen_nic_main don't use deprecated irq flags
  Use menuconfig objects II - netdev/wan
  Use menuconfig objects II - netdev/pcmcia
  Use menuconfig objects II - netdev/atm
  Use menuconfig objects: netdev
  Use menuconfig objects: PHY
  spidernet: remove unnecessary accesses to phy
  S2IO: Statistics for link up/down and memory allocated/freed
  S2IO: statistics for memory allocation failuers
  S2IO: getringparam ethtool option
  [PATCH] libertas: 64-bit cleanups
  [PATCH] libertas: sparse fixes
  [PATCH] libertas: fix missing unlock in TX error path
  [PATCH] libertas: make debugfs.c sparse-clean
  ...

drivers/atm/Kconfig

@@ -2,19 +2,22 @@
 # ATM device configuration
 #
 
-menu "ATM drivers"
+menuconfig ATM_DRIVERS
+	bool "ATM drivers"
 	depends on NETDEVICES && ATM
+	default y
+
+if ATM_DRIVERS
 
 config ATM_DUMMY
 	tristate "Dummy ATM driver"
-	depends on ATM
 	help
 	  Dummy ATM driver. Useful for proxy signalling, testing,
 	  and development.  If unsure, say N.
 
 config ATM_TCP
 	tristate "ATM over TCP"
-	depends on INET && ATM
+	depends on INET
 	help
 	  ATM over TCP driver. Useful mainly for development and for
 	  experiments. If unsure, say N.
@@ -30,7 +33,7 @@ config ATM_LANAI
 
 config ATM_ENI
 	tristate "Efficient Networks ENI155P"
-	depends on PCI && ATM
+	depends on PCI
 	---help---
 	  Driver for the Efficient Networks ENI155p series and SMC ATM
 	  Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
@@ -139,7 +142,7 @@ config ATM_ENI_BURST_RX_2W
 
 config ATM_FIRESTREAM
 	tristate "Fujitsu FireStream (FS50/FS155) "
-	depends on PCI && ATM
+	depends on PCI
 	help
 	  Driver for the Fujitsu FireStream 155 (MB86697) and
 	  FireStream 50 (MB86695) ATM PCI chips.
@@ -149,7 +152,7 @@ config ATM_FIRESTREAM
 
 config ATM_ZATM
 	tristate "ZeitNet ZN1221/ZN1225"
-	depends on PCI && ATM
+	depends on PCI
 	help
 	  Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
 	  adapters.
@@ -169,7 +172,7 @@ config ATM_ZATM_DEBUG
 
 config ATM_NICSTAR
 	tristate "IDT 77201 (NICStAR) (ForeRunnerLE)"
-	depends on PCI && ATM && !64BIT
+	depends on PCI && !64BIT
 	help
 	  The NICStAR chipset family is used in a large number of ATM NICs for
 	  25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE
@@ -202,7 +205,7 @@ config ATM_NICSTAR_USE_IDT77105
 
 config ATM_IDT77252
 	tristate "IDT 77252 (NICStAR II)"
-	depends on PCI && ATM
+	depends on PCI
 	help
 	  Driver for the IDT 77252 ATM PCI chips.
 
@@ -237,7 +240,7 @@ config ATM_IDT77252_USE_SUNI
 
 config ATM_AMBASSADOR
 	tristate "Madge Ambassador (Collage PCI 155 Server)"
-	depends on PCI && ATM
+	depends on PCI
 	select BITREVERSE
 	help
 	  This is a driver for ATMizer based ATM card produced by Madge
@@ -262,7 +265,7 @@ config ATM_AMBASSADOR_DEBUG
 
 config ATM_HORIZON
 	tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)"
-	depends on PCI && ATM
+	depends on PCI
 	help
 	  This is a driver for the Horizon chipset ATM adapter cards once
 	  produced by Madge Networks Ltd. Say Y (or M to compile as a module
@@ -286,7 +289,7 @@ config ATM_HORIZON_DEBUG
 
 config ATM_IA
 	tristate "Interphase ATM PCI x575/x525/x531"
-	depends on PCI && ATM && !64BIT
+	depends on PCI && !64BIT
 	---help---
 	  This is a driver for the Interphase (i)ChipSAR adapter cards
 	  which include a variety of variants in term of the size of the
@@ -319,7 +322,7 @@ config ATM_IA_DEBUG
 
 config ATM_FORE200E_MAYBE
 	tristate "FORE Systems 200E-series"
-	depends on (PCI || SBUS) && ATM
+	depends on PCI || SBUS
 	---help---
 	  This is a driver for the FORE Systems 200E-series ATM adapter
 	  cards. It simultaneously supports PCA-200E and SBA-200E models
@@ -436,7 +439,7 @@ config ATM_FORE200E
 
 config ATM_HE
 	tristate "ForeRunner HE Series"
-	depends on PCI && ATM
+	depends on PCI
 	help
 	  This is a driver for the Marconi ForeRunner HE-series ATM adapter
 	  cards. It simultaneously supports the 155 and 622 versions.
@@ -448,5 +451,4 @@ config ATM_HE_USE_SUNI
 	  Support for the S/UNI-Ultra and S/UNI-622 found in the ForeRunner
 	  HE cards.  This driver provides carrier detection some statistics.
 
-endmenu
-
+endif # ATM

drivers/net/Kconfig

@@ -1898,8 +1898,12 @@ endmenu
 #	Gigabit Ethernet
 #
 
-menu "Ethernet (1000 Mbit)"
+menuconfig NETDEV_1000
+	bool "Ethernet (1000 Mbit)"
 	depends on !UML
+	default y
+
+if NETDEV_1000
 
 config ACENIC
 	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2326,14 +2330,18 @@ config ATL1
 	  To compile this driver as a module, choose M here.  The module
 	  will be called atl1.
 
-endmenu
+endif # NETDEV_1000
 
 #
 #	10 Gigabit Ethernet
 #
 
-menu "Ethernet (10000 Mbit)"
+menuconfig NETDEV_10000
+	bool "Ethernet (10000 Mbit)"
 	depends on !UML
+	default y
+
+if NETDEV_10000
 
 config CHELSIO_T1
         tristate "Chelsio 10Gb Ethernet support"
@@ -2507,7 +2515,7 @@ config MLX4_DEBUG
 	  debug_level module parameter (which can also be set after
 	  the driver is loaded through sysfs).
 
-endmenu
+endif # NETDEV_10000
 
 source "drivers/net/tokenring/Kconfig"
 

drivers/net/mlx4/eq.c

@@ -623,7 +623,7 @@ int __devinit mlx4_init_eq_table(struct mlx4_dev *dev)
 		priv->eq_table.eq[MLX4_EQ_CATAS].have_irq = 1;
 	} else {
 		err = request_irq(dev->pdev->irq, mlx4_interrupt,
-				  SA_SHIRQ, DRV_NAME, dev);
+				  IRQF_SHARED, DRV_NAME, dev);
 		if (err)
 			goto err_out_async;
 

drivers/net/netxen/netxen_nic_main.c

@@ -735,7 +735,7 @@ static int netxen_nic_open(struct net_device *netdev)
 		}
 		adapter->irq = adapter->ahw.pdev->irq;
 		err = request_irq(adapter->ahw.pdev->irq, netxen_intr,
-				  SA_SHIRQ | SA_SAMPLE_RANDOM, netdev->name,
+				  IRQF_SHARED|IRQF_SAMPLE_RANDOM, netdev->name,
 				  adapter);
 		if (err) {
 			printk(KERN_ERR "request_irq failed with: %d\n", err);

drivers/net/pcmcia/Kconfig

@@ -2,11 +2,9 @@
 # PCMCIA Network device configuration
 #
 
-menu "PCMCIA network device support"
-	depends on NETDEVICES && PCMCIA!=n
-
-config NET_PCMCIA
+menuconfig NET_PCMCIA
 	bool "PCMCIA network device support"
+	depends on PCMCIA
 	---help---
 	  Say Y if you would like to include support for any PCMCIA or CardBus
 	  network adapters, then say Y to the driver for your particular card
@@ -21,9 +19,10 @@ config NET_PCMCIA
 
 	  If unsure, say N.
 
+if NET_PCMCIA
+
 config PCMCIA_3C589
 	tristate "3Com 3c589 PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	help
 	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
 	  (PC-card) Ethernet card to your computer.
@@ -33,7 +32,6 @@ config PCMCIA_3C589
 
 config PCMCIA_3C574
 	tristate "3Com 3c574 PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	help
 	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.
@@ -43,7 +41,6 @@ config PCMCIA_3C574
 
 config PCMCIA_FMVJ18X
 	tristate "Fujitsu FMV-J18x PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	select CRC32
 	help
 	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
@@ -54,7 +51,6 @@ config PCMCIA_FMVJ18X
 
 config PCMCIA_PCNET
 	tristate "NE2000 compatible PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	select CRC32
 	help
 	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
@@ -65,7 +61,6 @@ config PCMCIA_PCNET
 
 config PCMCIA_NMCLAN
 	tristate "New Media PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	help
 	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
 	  PCMCIA (PC-card) Ethernet card to your computer.
@@ -75,7 +70,6 @@ config PCMCIA_NMCLAN
 
 config PCMCIA_SMC91C92
 	tristate "SMC 91Cxx PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	select CRC32
 	select MII
 	help
@@ -87,7 +81,6 @@ config PCMCIA_SMC91C92
 
 config PCMCIA_XIRC2PS
 	tristate "Xircom 16-bit PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	help
 	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
 	  Ethernet or Fast Ethernet card to your computer.
@@ -97,7 +90,6 @@ config PCMCIA_XIRC2PS
 
 config PCMCIA_AXNET
 	tristate "Asix AX88190 PCMCIA support"
-	depends on NET_PCMCIA && PCMCIA
 	---help---
 	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.  These cards are
@@ -109,7 +101,7 @@ config PCMCIA_AXNET
 
 config ARCNET_COM20020_CS
 	tristate "COM20020 ARCnet PCMCIA support"
-	depends on NET_PCMCIA && ARCNET_COM20020 && PCMCIA
+	depends on ARCNET_COM20020
 	help
 	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
 	  to your computer.
@@ -119,7 +111,7 @@ config ARCNET_COM20020_CS
 
 config PCMCIA_IBMTR
 	tristate "IBM PCMCIA tokenring adapter support"
-	depends on NET_PCMCIA && IBMTR!=y && TR && PCMCIA && !64BIT
+	depends on IBMTR!=y && TR && !64BIT
 	help
 	  Say Y here if you intend to attach this type of Token Ring PCMCIA
 	  card to your computer. You then also need to say Y to "Token Ring
@@ -128,5 +120,4 @@ config PCMCIA_IBMTR
 	  To compile this driver as a module, choose M here: the module will be
 	  called ibmtr_cs.
 
-endmenu
-
+endif # NET_PCMCIA

drivers/net/phy/Kconfig

@@ -2,70 +2,61 @@
 # PHY Layer Configuration
 #
 
-menu "PHY device support"
-	depends on !S390
-
-config PHYLIB
+menuconfig PHYLIB
 	tristate "PHY Device support and infrastructure"
+	depends on !S390
 	depends on NET_ETHERNET && (BROKEN || !S390)
 	help
 	  Ethernet controllers are usually attached to PHY
 	  devices.  This option provides infrastructure for
 	  managing PHY devices.
 
+if PHYLIB
+
 comment "MII PHY device drivers"
-	depends on PHYLIB
 
 config MARVELL_PHY
 	tristate "Drivers for Marvell PHYs"
-	depends on PHYLIB
 	---help---
 	  Currently has a driver for the 88E1011S
 	
 config DAVICOM_PHY
 	tristate "Drivers for Davicom PHYs"
-	depends on PHYLIB
 	---help---
 	  Currently supports dm9161e and dm9131
 
 config QSEMI_PHY
 	tristate "Drivers for Quality Semiconductor PHYs"
-	depends on PHYLIB
 	---help---
 	  Currently supports the qs6612
 
 config LXT_PHY
 	tristate "Drivers for the Intel LXT PHYs"
-	depends on PHYLIB
 	---help---
 	  Currently supports the lxt970, lxt971
 
 config CICADA_PHY
 	tristate "Drivers for the Cicada PHYs"
-	depends on PHYLIB
 	---help---
 	  Currently supports the cis8204
+
 config VITESSE_PHY
         tristate "Drivers for the Vitesse PHYs"
-        depends on PHYLIB
         ---help---
           Currently supports the vsc8244
 
 config SMSC_PHY
 	tristate "Drivers for SMSC PHYs"
-	depends on PHYLIB
 	---help---
 	  Currently supports the LAN83C185 PHY
 
 config BROADCOM_PHY
 	tristate "Drivers for Broadcom PHYs"
-	depends on PHYLIB
 	---help---
 	  Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
 
 config FIXED_PHY
 	tristate "Drivers for PHY emulation on fixed speed/link"
-	depends on PHYLIB
 	---help---
 	  Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
 	  but with the ability to manipulate the speed/link in software. The relevant MII
@@ -80,5 +71,4 @@ config FIXED_MII_100_FDX
 	bool "Emulation for 100M Fdx fixed PHY behavior"
 	depends on FIXED_PHY
 
-endmenu
-
+endif # PHYLIB

drivers/net/phy/davicom.c

@@ -139,7 +139,7 @@ static int dm9161_ack_interrupt(struct phy_device *phydev)
 	return (err < 0) ? err : 0;
 }
 
-static struct phy_driver dm9161_driver = {
+static struct phy_driver dm9161e_driver = {
 	.phy_id		= 0x0181b880,
 	.name		= "Davicom DM9161E",
 	.phy_id_mask	= 0x0ffffff0,
@@ -150,6 +150,17 @@ static struct phy_driver dm9161_driver = {
 	.driver		= { .owner = THIS_MODULE,},
 };
 
+static struct phy_driver dm9161a_driver = {
+	.phy_id		= 0x0181b8a0,
+	.name		= "Davicom DM9161A",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.config_init	= dm9161_config_init,
+	.config_aneg	= dm9161_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
 static struct phy_driver dm9131_driver = {
 	.phy_id		= 0x00181b80,
 	.name		= "Davicom DM9131",
@@ -167,24 +178,31 @@ static int __init davicom_init(void)
 {
 	int ret;
 
-	ret = phy_driver_register(&dm9161_driver);
+	ret = phy_driver_register(&dm9161e_driver);
 	if (ret)
 		goto err1;
 
-	ret = phy_driver_register(&dm9131_driver);
+	ret = phy_driver_register(&dm9161a_driver);
 	if (ret)
 		goto err2;
+
+	ret = phy_driver_register(&dm9131_driver);
+	if (ret)
+		goto err3;
 	return 0;
 
+ err3:
+	phy_driver_unregister(&dm9161a_driver);
  err2:
-	phy_driver_unregister(&dm9161_driver);
+	phy_driver_unregister(&dm9161e_driver);
  err1:
 	return ret;
 }
 
 static void __exit davicom_exit(void)
 {
-	phy_driver_unregister(&dm9161_driver);
+	phy_driver_unregister(&dm9161e_driver);
+	phy_driver_unregister(&dm9161a_driver);
 	phy_driver_unregister(&dm9131_driver);
 }
 

drivers/net/s2io.h

@@ -95,6 +95,32 @@ struct swStat {
 	unsigned long long flush_max_pkts;
 	unsigned long long sum_avg_pkts_aggregated;
 	unsigned long long num_aggregations;
+	/* Other statistics */
+	unsigned long long mem_alloc_fail_cnt;
+	unsigned long long watchdog_timer_cnt;
+	unsigned long long mem_allocated;
+	unsigned long long mem_freed;
+	unsigned long long link_up_cnt;
+	unsigned long long link_down_cnt;
+	unsigned long long link_up_time;
+	unsigned long long link_down_time;
+
+	/* Transfer Code statistics */
+	unsigned long long tx_buf_abort_cnt;
+	unsigned long long tx_desc_abort_cnt;
+	unsigned long long tx_parity_err_cnt;
+	unsigned long long tx_link_loss_cnt;
+	unsigned long long tx_list_proc_err_cnt;
+
+	unsigned long long rx_parity_err_cnt;
+	unsigned long long rx_abort_cnt;
+	unsigned long long rx_parity_abort_cnt;
+	unsigned long long rx_rda_fail_cnt;
+	unsigned long long rx_unkn_prot_cnt;
+	unsigned long long rx_fcs_err_cnt;
+	unsigned long long rx_buf_size_err_cnt;
+	unsigned long long rx_rxd_corrupt_cnt;
+	unsigned long long rx_unkn_err_cnt;
 };
 
 /* Xpak releated alarm and warnings */
@@ -308,6 +334,11 @@ struct stat_block {
 #define MAX_TX_FIFOS 8
 #define MAX_RX_RINGS 8
 
+#define MAX_RX_DESC_1  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 )
+#define MAX_RX_DESC_2  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
+#define MAX_RX_DESC_3  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
+#define MAX_TX_DESC    (MAX_AVAILABLE_TXDS)
+
 /* FIFO mappings for all possible number of fifos configured */
 static int fifo_map[][MAX_TX_FIFOS] = {
 	{0, 0, 0, 0, 0, 0, 0, 0},
@@ -819,6 +850,7 @@ struct s2io_nic {
 #define	LINK_UP		2
 
 	int task_flag;
+	unsigned long long start_time;
 #define CARD_DOWN 1
 #define CARD_UP 2
 	atomic_t card_state;

drivers/net/skge.c

@@ -3802,6 +3802,9 @@ static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
 	int i, err, wol = 0;
 
+	if (!hw)
+		return 0;
+
 	err = pci_save_state(pdev);
 	if (err)
 		return err;
@@ -3830,6 +3833,9 @@ static int skge_resume(struct pci_dev *pdev)
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
 	int i, err;
 
+	if (!hw)
+		return 0;
+
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err)
 		goto out;
@@ -3868,6 +3874,9 @@ static void skge_shutdown(struct pci_dev *pdev)
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
 	int i, wol = 0;
 
+	if (!hw)
+		return;
+
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 		struct skge_port *skge = netdev_priv(dev);

drivers/net/sky2.c

@@ -40,6 +40,7 @@
 #include <linux/if_vlan.h>
 #include <linux/prefetch.h>
 #include <linux/mii.h>
+#include <linux/dmi.h>
 
 #include <asm/irq.h>
 
@@ -130,7 +131,7 @@ static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
-	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+//	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
 	{ 0 }
 };
 
@@ -150,6 +151,8 @@ static const char *yukon2_name[] = {
 	"FE",		/* 0xb7 */
 };
 
+static int dmi_blacklisted;
+
 /* Access to external PHY */
 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
 {
@@ -2531,6 +2534,17 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 		return -EOPNOTSUPP;
 	}
 
+
+	/* Some Gigabyte motherboards have 88e8056 but cause problems
+	 * There is some unresolved hardware related problem that causes
+	 * descriptor errors and receive data corruption.
+	 */
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && dmi_blacklisted) {
+		dev_err(&hw->pdev->dev,
+			"88E8056 on this motherboard not supported\n");
+		return -EOPNOTSUPP;
+	}
+
 	hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
 	hw->ports = 1;
 	t8 = sky2_read8(hw, B2_Y2_HW_RES);
@@ -3578,17 +3592,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		goto err_out;
 	}
 
-	/* Some Gigabyte motherboards have 88e8056 but cause problems
-	 * There is some unresolved hardware related problem that causes
-	 * descriptor errors and receive data corruption.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_MARVELL &&
-	    pdev->device == 0x4364 && pdev->subsystem_vendor == 0x1458) {
-		dev_err(&pdev->dev,
-			"88E8056 on Gigabyte motherboards not supported\n");
-		goto err_out_disable;
-	}
-
 	err = pci_request_regions(pdev, DRV_NAME);
 	if (err) {
 		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
@@ -3732,6 +3735,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 err_out_disable:
 	pci_disable_device(pdev);
 err_out:
+	pci_set_drvdata(pdev, NULL);
 	return err;
 }
 
@@ -3784,6 +3788,9 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
 	int i, wol = 0;
 
+	if (!hw)
+		return 0;
+
 	del_timer_sync(&hw->idle_timer);
 	netif_poll_disable(hw->dev[0]);
 
@@ -3815,6 +3822,9 @@ static int sky2_resume(struct pci_dev *pdev)
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
 	int i, err;
 
+	if (!hw)
+		return 0;
+
 	err = pci_set_power_state(pdev, PCI_D0);
 	if (err)
 		goto out;
@@ -3861,6 +3871,9 @@ static void sky2_shutdown(struct pci_dev *pdev)
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
 	int i, wol = 0;
 
+	if (!hw)
+		return;
+
 	del_timer_sync(&hw->idle_timer);
 	netif_poll_disable(hw->dev[0]);
 
@@ -3897,8 +3910,24 @@ static struct pci_driver sky2_driver = {
 	.shutdown = sky2_shutdown,
 };
 
+static struct dmi_system_id __initdata broken_dmi_table[] = {
+	{
+		.ident = "Gigabyte 965P-S3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gigabyte Technology Co., Ltd."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "965P-S3"),
+
+		},
+	},
+	{ }
+};
+
 static int __init sky2_init_module(void)
 {
+	/* Look for sick motherboards */
+	if (dmi_check_system(broken_dmi_table))
+		dmi_blacklisted = 1;
+
 	return pci_register_driver(&sky2_driver);
 }
 

drivers/net/spider_net.c

@@ -175,11 +175,9 @@ spider_net_setup_aneg(struct spider_net_card *card)
 {
 	struct mii_phy *phy = &card->phy;
 	u32 advertise = 0;
-	u16 bmcr, bmsr, stat1000, estat;
+	u16 bmsr, estat;
 
-	bmcr     = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMCR);
 	bmsr  = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
-	stat1000 = spider_net_read_phy(card->netdev, phy->mii_id, MII_STAT1000);
 	estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
 
 	if (bmsr & BMSR_10HALF)

drivers/net/wan/Kconfig

@@ -2,10 +2,7 @@
 # wan devices configuration
 #
 
-menu "Wan interfaces"
-	depends on NETDEVICES
-
-config WAN
+menuconfig WAN
 	bool "Wan interfaces support"
 	---help---
 	  Wide Area Networks (WANs), such as X.25, Frame Relay and leased
@@ -23,10 +20,12 @@ config WAN
 
 	  If unsure, say N.
 
+if WAN
+
 # There is no way to detect a comtrol sv11 - force it modular for now.
 config HOSTESS_SV11
 	tristate "Comtrol Hostess SV-11 support"
-	depends on WAN && ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET
 	help
 	  Driver for Comtrol Hostess SV-11 network card which
 	  operates on low speed synchronous serial links at up to
@@ -38,7 +37,7 @@ config HOSTESS_SV11
 # The COSA/SRP driver has not been tested as non-modular yet.
 config COSA
 	tristate "COSA/SRP sync serial boards support"
-	depends on WAN && ISA && m && ISA_DMA_API
+	depends on ISA && m && ISA_DMA_API
 	---help---
 	  Driver for COSA and SRP synchronous serial boards.
 
@@ -62,7 +61,7 @@ config COSA
 #
 config LANMEDIA
 	tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
-	depends on WAN && PCI
+	depends on PCI
 	---help---
 	  Driver for the following Lan Media family of serial boards:
 
@@ -89,7 +88,7 @@ config LANMEDIA
 # There is no way to detect a Sealevel board. Force it modular
 config SEALEVEL_4021
 	tristate "Sealevel Systems 4021 support"
-	depends on WAN && ISA && m && ISA_DMA_API && INET
+	depends on ISA && m && ISA_DMA_API && INET
 	help
 	  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
 
@@ -99,7 +98,6 @@ config SEALEVEL_4021
 # Generic HDLC
 config HDLC
 	tristate "Generic HDLC layer"
-	depends on WAN
 	help
 	  Say Y to this option if your Linux box contains a WAN (Wide Area
 	  Network) card supported by this driver and you are planning to
@@ -167,7 +165,7 @@ config HDLC_X25
 	  If unsure, say N.
 
 comment "X.25/LAPB support is disabled"
-	depends on WAN && HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
+	depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
 
 config PCI200SYN
 	tristate "Goramo PCI200SYN support"
@@ -230,10 +228,10 @@ config PC300_MLPPP
 	  Multilink PPP over the PC300 synchronous communication boards.
 
 comment "Cyclades-PC300 MLPPP support is disabled."
-	depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
 
 comment "Refer to the file README.mlppp, provided by PC300 package."
-	depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
 
 config PC300TOO
 	tristate "Cyclades PC300 RSV/X21 alternative support"
@@ -338,7 +336,6 @@ config DSCC4_PCI_RST
 
 config DLCI
 	tristate "Frame Relay DLCI support"
-	depends on WAN
 	---help---
 	  Support for the Frame Relay protocol.
 
@@ -385,7 +382,7 @@ config SDLA
 # Wan router core.
 config WAN_ROUTER_DRIVERS
 	tristate "WAN router drivers"
-	depends on WAN && WAN_ROUTER
+	depends on WAN_ROUTER
 	---help---
 	  Connect LAN to WAN via Linux box.
 
@@ -440,7 +437,7 @@ config CYCLOMX_X25
 # X.25 network drivers
 config LAPBETHER
 	tristate "LAPB over Ethernet driver (EXPERIMENTAL)"
-	depends on WAN && LAPB && X25
+	depends on LAPB && X25
 	---help---
 	  Driver for a pseudo device (typically called /dev/lapb0) which allows
 	  you to open an LAPB point-to-point connection to some other computer
@@ -456,7 +453,7 @@ config LAPBETHER
 
 config X25_ASY
 	tristate "X.25 async driver (EXPERIMENTAL)"
-	depends on WAN && LAPB && X25
+	depends on LAPB && X25
 	---help---
 	  Send and receive X.25 frames over regular asynchronous serial
 	  lines such as telephone lines equipped with ordinary modems.
@@ -471,7 +468,7 @@ config X25_ASY
 
 config SBNI
 	tristate "Granch SBNI12 Leased Line adapter support"
-	depends on WAN && X86
+	depends on X86
 	---help---
 	  Driver for ISA SBNI12-xx cards which are low cost alternatives to
 	  leased line modems.
@@ -497,5 +494,4 @@ config SBNI_MULTILINE
 
 	  If unsure, say N.
 
-endmenu
-
+endif # WAN

drivers/net/wireless/libertas/Makefile

-# EXTRA_CFLAGS += -Wpacked
-
 usb8xxx-objs := main.o fw.o wext.o \
 		rx.o tx.o cmd.o 	  \
 		cmdresp.o scan.o	  \
@@ -7,13 +5,6 @@ usb8xxx-objs := main.o fw.o wext.o \
 		ioctl.o debugfs.o	  \
 		ethtool.o assoc.o
 
-ifeq ($(CONFIG_LIBERTAS_USB_DEBUG), y)
-EXTRA_CFLAGS += -DDEBUG -DPROC_DEBUG
-endif
-
-
-# This is needed to support the newer boot2 bootloader (v >= 3104)
-EXTRA_CFLAGS += -DSUPPORT_BOOT_COMMAND
 usb8xxx-objs += if_bootcmd.o
 usb8xxx-objs += if_usb.o
 

drivers/net/wireless/libertas/assoc.c

@@ -23,13 +23,13 @@ static int assoc_helper_essid(wlan_private *priv,
 	ENTER();
 
 	lbs_pr_debug(1, "New SSID requested: %s\n", assoc_req->ssid.ssid);
-	if (assoc_req->mode == wlan802_11infrastructure) {
+	if (assoc_req->mode == IW_MODE_INFRA) {
 		if (adapter->prescan) {
 			libertas_send_specific_SSID_scan(priv, &assoc_req->ssid, 1);
 		}
 
 		i = libertas_find_SSID_in_list(adapter, &assoc_req->ssid,
-				NULL, wlan802_11infrastructure);
+				NULL, IW_MODE_INFRA);
 		if (i >= 0) {
 			lbs_pr_debug(1,
 			       "SSID found in scan list ... associating...\n");
@@ -44,7 +44,7 @@ static int assoc_helper_essid(wlan_private *priv,
 			lbs_pr_debug(1, "SSID '%s' not found; cannot associate\n",
 				assoc_req->ssid.ssid);
 		}
-	} else if (assoc_req->mode == wlan802_11ibss) {
+	} else if (assoc_req->mode == IW_MODE_ADHOC) {
 		/* Scan for the network, do not save previous results.  Stale
 		 *   scan data will cause us to join a non-existant adhoc network
 		 */
@@ -52,7 +52,7 @@ static int assoc_helper_essid(wlan_private *priv,
 
 		/* Search for the requested SSID in the scan table */
 		i = libertas_find_SSID_in_list(adapter, &assoc_req->ssid, NULL,
-				wlan802_11ibss);
+				IW_MODE_ADHOC);
 		if (i >= 0) {
 			lbs_pr_debug(1, "SSID found at %d in List, so join\n", ret);
 			libertas_join_adhoc_network(priv, &adapter->scantable[i]);
@@ -90,10 +90,10 @@ static int assoc_helper_bssid(wlan_private *priv,
 		goto out;
 	}
 
-	if (assoc_req->mode == wlan802_11infrastructure) {
+	if (assoc_req->mode == IW_MODE_INFRA) {
 		ret = wlan_associate(priv, &adapter->scantable[i]);
 		lbs_pr_debug(1, "ASSOC: return from wlan_associate(bssd) was %d\n", ret);
-	} else if (assoc_req->mode == wlan802_11ibss) {
+	} else if (assoc_req->mode == IW_MODE_ADHOC) {
 		libertas_join_adhoc_network(priv, &adapter->scantable[i]);
 	}
 	memcpy(&assoc_req->ssid, &adapter->scantable[i].ssid,
@@ -142,23 +142,23 @@ static int assoc_helper_mode(wlan_private *priv,
 
 	ENTER();
 
-	if (assoc_req->mode == adapter->inframode) {
+	if (assoc_req->mode == adapter->mode) {
 		LEAVE();
 		return 0;
 	}
 
-	if (assoc_req->mode == wlan802_11infrastructure) {
+	if (assoc_req->mode == IW_MODE_INFRA) {
 		if (adapter->psstate != PS_STATE_FULL_POWER)
 			libertas_ps_wakeup(priv, cmd_option_waitforrsp);
 		adapter->psmode = wlan802_11powermodecam;
 	}
 
-	adapter->inframode = assoc_req->mode;
+	adapter->mode = assoc_req->mode;
 	ret = libertas_prepare_and_send_command(priv,
 				    cmd_802_11_snmp_mib,
 				    0, cmd_option_waitforrsp,
 				    OID_802_11_INFRASTRUCTURE_MODE,
-				    (void *) assoc_req->mode);
+				    (void *) (size_t) assoc_req->mode);
 
 	LEAVE();
 	return ret;
@@ -196,7 +196,7 @@ static int assoc_helper_wep_keys(wlan_private *priv,
 		goto out;
 
 	/* enable/disable the MAC's WEP packet filter */
-	if (assoc_req->secinfo.WEPstatus == wlan802_11WEPenabled)
+	if (assoc_req->secinfo.wep_enabled)
 		adapter->currentpacketfilter |= cmd_act_mac_wep_enable;
 	else
 		adapter->currentpacketfilter &= ~cmd_act_mac_wep_enable;
@@ -300,8 +300,7 @@ static int should_deauth_infrastructure(wlan_adapter *adapter,
 	}
 
 	if (test_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags)) {
-		if (adapter->secinfo.authmode !=
-		    assoc_req->secinfo.authmode) {
+		if (adapter->secinfo.auth_mode != assoc_req->secinfo.auth_mode) {
 			lbs_pr_debug(1, "Deauthenticating due to updated security "
 				"info in configuration request.\n");
 			return 1;
@@ -316,7 +315,7 @@ static int should_deauth_infrastructure(wlan_adapter *adapter,
 
 	/* FIXME: deal with 'auto' mode somehow */
 	if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) {
-		if (assoc_req->mode != wlan802_11infrastructure)
+		if (assoc_req->mode != IW_MODE_INFRA)
 			return 1;
 	}
 
@@ -333,12 +332,12 @@ static int should_stop_adhoc(wlan_adapter *adapter,
 	if (adapter->curbssparams.ssid.ssidlength != assoc_req->ssid.ssidlength)
 		return 1;
 	if (memcmp(adapter->curbssparams.ssid.ssid, assoc_req->ssid.ssid,
-			sizeof(struct WLAN_802_11_SSID)))
+			adapter->curbssparams.ssid.ssidlength))
 		return 1;
 
 	/* FIXME: deal with 'auto' mode somehow */
 	if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) {
-		if (assoc_req->mode != wlan802_11ibss)
+		if (assoc_req->mode != IW_MODE_ADHOC)
 			return 1;
 	}
 
@@ -382,7 +381,7 @@ void wlan_association_worker(struct work_struct *work)
 	}
 
 	if (find_any_ssid) {
-		enum WLAN_802_11_NETWORK_INFRASTRUCTURE new_mode;
+		u8 new_mode;
 
 		ret = libertas_find_best_network_SSID(priv, &assoc_req->ssid,
 				assoc_req->mode, &new_mode);
@@ -393,7 +392,7 @@ void wlan_association_worker(struct work_struct *work)
 		}
 
 		/* Ensure we switch to the mode of the AP */
-		if (assoc_req->mode == wlan802_11autounknown) {
+		if (assoc_req->mode == IW_MODE_AUTO) {
 			set_bit(ASSOC_FLAG_MODE, &assoc_req->flags);
 			assoc_req->mode = new_mode;
 		}
@@ -403,7 +402,7 @@ void wlan_association_worker(struct work_struct *work)
 	 * Check if the attributes being changing require deauthentication
 	 * from the currently associated infrastructure access point.
 	 */
-	if (adapter->inframode == wlan802_11infrastructure) {
+	if (adapter->mode == IW_MODE_INFRA) {
 		if (should_deauth_infrastructure(adapter, assoc_req)) {
 			ret = libertas_send_deauthentication(priv);
 			if (ret) {
@@ -412,7 +411,7 @@ void wlan_association_worker(struct work_struct *work)
 					ret);
 			}
 		}
-	} else if (adapter->inframode == wlan802_11ibss) {
+	} else if (adapter->mode == IW_MODE_ADHOC) {
 		if (should_stop_adhoc(adapter, assoc_req)) {
 			ret = libertas_stop_adhoc_network(priv);
 			if (ret) {
@@ -543,7 +542,7 @@ struct assoc_request * wlan_get_association_request(wlan_adapter *adapter)
 		assoc_req->channel = adapter->curbssparams.channel;
 
 	if (!test_bit(ASSOC_FLAG_MODE, &assoc_req->flags))
-		assoc_req->mode = adapter->inframode;
+		assoc_req->mode = adapter->mode;
 
 	if (!test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
 		memcpy(&assoc_req->bssid, adapter->curbssparams.bssid,

drivers/net/wireless/libertas/cmd.c

@@ -381,15 +381,16 @@ static int wlan_cmd_802_11_snmp_mib(wlan_private * priv,
 	switch (cmd_oid) {
 	case OID_802_11_INFRASTRUCTURE_MODE:
 	{
-		enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode =
-			(enum WLAN_802_11_NETWORK_INFRASTRUCTURE) pdata_buf;
+		u8 mode = (u8) (size_t) pdata_buf;
 		pSNMPMIB->querytype = cpu_to_le16(cmd_act_set);
 		pSNMPMIB->oid = cpu_to_le16((u16) desired_bsstype_i);
 		pSNMPMIB->bufsize = sizeof(u8);
-		if (mode == wlan802_11infrastructure)
-			ucTemp = SNMP_MIB_VALUE_INFRA;
-		else
+		if (mode == IW_MODE_ADHOC) {
 			ucTemp = SNMP_MIB_VALUE_ADHOC;
+		} else {
+			/* Infra and Auto modes */
+			ucTemp = SNMP_MIB_VALUE_INFRA;
+		}
 
 		memmove(pSNMPMIB->value, &ucTemp, sizeof(u8));
 
@@ -947,8 +948,8 @@ void libertas_queue_cmd(wlan_adapter * adapter, struct cmd_ctrl_node *cmdnode, u
 
 	spin_unlock_irqrestore(&adapter->driver_lock, flags);
 
-	lbs_pr_debug(1, "QUEUE_CMD: Inserted node=0x%x, cmd=0x%x in cmdpendingq\n",
-	       (u32) cmdnode,
+	lbs_pr_debug(1, "QUEUE_CMD: Inserted node=%p, cmd=0x%x in cmdpendingq\n",
+	       cmdnode,
 	       ((struct cmd_ds_gen*)cmdnode->bufvirtualaddr)->command);
 
 done:
@@ -976,8 +977,8 @@ static int DownloadcommandToStation(wlan_private * priv,
 	ENTER();
 
 	if (!adapter || !cmdnode) {
-		lbs_pr_debug(1, "DNLD_CMD: adapter = %#x, cmdnode = %#x\n",
-		       (int)adapter, (int)cmdnode);
+		lbs_pr_debug(1, "DNLD_CMD: adapter = %p, cmdnode = %p\n",
+		       adapter, cmdnode);
 		if (cmdnode) {
 			spin_lock_irqsave(&adapter->driver_lock, flags);
 			__libertas_cleanup_and_insert_cmd(priv, cmdnode);
@@ -1174,8 +1175,8 @@ int libertas_prepare_and_send_command(wlan_private * priv,
 
 	cmdptr = (struct cmd_ds_command *)cmdnode->bufvirtualaddr;
 
-	lbs_pr_debug(1, "PREP_CMD: Val of cmd ptr =0x%x, command=0x%X\n",
-	       (u32) cmdptr, cmd_no);
+	lbs_pr_debug(1, "PREP_CMD: Val of cmd ptr=%p, command=0x%X\n",
+	       cmdptr, cmd_no);
 
 	if (!cmdptr) {
 		lbs_pr_debug(1, "PREP_CMD: bufvirtualaddr of cmdnode is NULL\n");

drivers/net/wireless/libertas/cmdresp.c

@@ -72,8 +72,6 @@ void libertas_mac_event_disconnected(wlan_private * priv)
 	adapter->secinfo.WPAenabled = 0;
 	adapter->secinfo.WPA2enabled = 0;
 	adapter->wpa_ie_len = 0;
-	adapter->secinfo.auth1xalg = WLAN_1X_AUTH_ALG_NONE;
-	adapter->secinfo.Encryptionmode = CIPHER_NONE;
 
 	adapter->connect_status = libertas_disconnected;
 
@@ -811,7 +809,7 @@ int libertas_process_rx_command(wlan_private * priv)
 		if (result) {
 			lbs_pr_debug(1, "CMD_RESP: PS command failed- %#x \n",
 			       resp->result);
-			if (adapter->inframode == wlan802_11ibss) {
+			if (adapter->mode == IW_MODE_ADHOC) {
 				/*
 				 * We should not re-try enter-ps command in
 				 * ad-hoc mode. It takes place in

drivers/net/wireless/libertas/debugfs.c

@@ -7,6 +7,7 @@
 #include "dev.h"
 #include "decl.h"
 #include "host.h"
+#include "debugfs.h"
 
 static struct dentry *libertas_dir = NULL;
 static char *szStates[] = {
@@ -276,7 +277,7 @@ static void libertas_parse_ssid(char *buf, size_t count,
 	if (!end)
 		end = buf + count - 1;
 
-	size = min(IW_ESSID_MAX_SIZE, end - hold);
+	size = min((size_t)IW_ESSID_MAX_SIZE, (size_t) (end - hold));
 	strncpy(scan_cfg->specificSSID, hold, size);
 
 	return;
@@ -1648,7 +1649,7 @@ struct libertas_debugfs_files {
 	struct file_operations fops;
 };
 
-struct libertas_debugfs_files debugfs_files[] = {
+static struct libertas_debugfs_files debugfs_files[] = {
 	{ "info", 0444, FOPS(libertas_dev_info, write_file_dummy), },
 	{ "getscantable", 0444, FOPS(libertas_getscantable,
 					write_file_dummy), },
@@ -1658,7 +1659,7 @@ struct libertas_debugfs_files debugfs_files[] = {
 	{ "setuserscan", 0600, FOPS(NULL, libertas_setuserscan), },
 };
 
-struct libertas_debugfs_files debugfs_events_files[] = {
+static struct libertas_debugfs_files debugfs_events_files[] = {
 	{"low_rssi", 0644, FOPS(libertas_lowrssi_read,
 				libertas_lowrssi_write), },
 	{"low_snr", 0644, FOPS(libertas_lowsnr_read,
@@ -1673,7 +1674,7 @@ struct libertas_debugfs_files debugfs_events_files[] = {
 				libertas_highsnr_write), },
 };
 
-struct libertas_debugfs_files debugfs_regs_files[] = {
+static struct libertas_debugfs_files debugfs_regs_files[] = {
 	{"rdmac", 0644, FOPS(libertas_rdmac_read, libertas_rdmac_write), },
 	{"wrmac", 0600, FOPS(NULL, libertas_wrmac_write), },
 	{"rdbbp", 0644, FOPS(libertas_rdbbp_read, libertas_rdbbp_write), },
@@ -1778,7 +1779,7 @@ void libertas_debugfs_remove_one(wlan_private *priv)
 struct debug_data {
 	char name[32];
 	u32 size;
-	u32 addr;
+	size_t addr;
 };
 
 /* To debug any member of wlan_adapter, simply add one line here.
@@ -1825,6 +1826,8 @@ static ssize_t wlan_debugfs_read(struct file *file, char __user *userbuf,
 			val = *((u16 *) d[i].addr);
 		else if (d[i].size == 4)
 			val = *((u32 *) d[i].addr);
+		else if (d[i].size == 8)
+			val = *((u64 *) d[i].addr);
 
 		pos += sprintf(p + pos, "%s=%d\n", d[i].name, val);
 	}
@@ -1844,7 +1847,7 @@ static ssize_t wlan_debugfs_read(struct file *file, char __user *userbuf,
  *  @param data    data to write
  *  @return 	   number of data
  */
-static int wlan_debugfs_write(struct file *f, const char __user *buf,
+static ssize_t wlan_debugfs_write(struct file *f, const char __user *buf,
 			    size_t cnt, loff_t *ppos)
 {
 	int r, i;
@@ -1886,12 +1889,14 @@ static int wlan_debugfs_write(struct file *f, const char __user *buf,
 				*((u16 *) d[i].addr) = (u16) r;
 			else if (d[i].size == 4)
 				*((u32 *) d[i].addr) = (u32) r;
+			else if (d[i].size == 8)
+				*((u64 *) d[i].addr) = (u64) r;
 			break;
 		} while (1);
 	}
 	kfree(pdata);
 
-	return cnt;
+	return (ssize_t)cnt;
 }
 
 static struct file_operations libertas_debug_fops = {
@@ -1916,20 +1921,10 @@ void libertas_debug_init(wlan_private * priv, struct net_device *dev)
 		return;
 
 	for (i = 0; i < num_of_items; i++)
-		items[i].addr += (u32) priv->adapter;
+		items[i].addr += (size_t) priv->adapter;
 
 	priv->debugfs_debug = debugfs_create_file("debug", 0644,
 						  priv->debugfs_dir, &items[0],
 						  &libertas_debug_fops);
 }
 
-/**
- *  @brief remove proc file
- *
- *  @param priv	   pointer wlan_private
- *  @return 	   N/A
- */
-void libertas_debug_remove(wlan_private * priv)
-{
-	debugfs_remove(priv->debugfs_debug);
-}

drivers/net/wireless/libertas/defs.h

@@ -9,6 +9,11 @@
 
 extern unsigned int libertas_debug;
 
+#ifdef CONFIG_LIBERTAS_DEBUG
+#define DEBUG
+#define PROC_DEBUG
+#endif
+
 #define DRV_NAME		"usb8xxx"
 
 #define lbs_pr_info(format, args...) \
@@ -223,31 +228,6 @@ enum SNRNF_DATA {
 	MAX_TYPE_AVG
 };
 
-/** WLAN_802_11_AUTH_ALG*/
-enum WLAN_802_11_AUTH_ALG {
-	AUTH_ALG_OPEN_SYSTEM = 1,
-	AUTH_ALG_SHARED_KEY = 2,
-	AUTH_ALG_NETWORK_EAP = 8,
-};
-
-/** WLAN_802_1X_AUTH_ALG */
-enum WLAN_802_1X_AUTH_ALG {
-	WLAN_1X_AUTH_ALG_NONE = 1,
-	WLAN_1X_AUTH_ALG_LEAP = 2,
-	WLAN_1X_AUTH_ALG_TLS = 4,
-	WLAN_1X_AUTH_ALG_TTLS = 8,
-	WLAN_1X_AUTH_ALG_MD5 = 16,
-};
-
-/** WLAN_802_11_ENCRYPTION_MODE */
-enum WLAN_802_11_ENCRYPTION_MODE {
-	CIPHER_NONE,
-	CIPHER_WEP40,
-	CIPHER_TKIP,
-	CIPHER_CCMP,
-	CIPHER_WEP104,
-};
-
 /** WLAN_802_11_POWER_MODE */
 enum WLAN_802_11_POWER_MODE {
 	wlan802_11powermodecam,
@@ -292,28 +272,6 @@ enum mv_ms_type {
 	MVMS_EVENT
 };
 
-/** WLAN_802_11_NETWORK_INFRASTRUCTURE */
-enum WLAN_802_11_NETWORK_INFRASTRUCTURE {
-	wlan802_11ibss,
-	wlan802_11infrastructure,
-	wlan802_11autounknown,
-	/*defined as upper bound */
-	wlan802_11infrastructuremax
-};
-
-/** WLAN_802_11_AUTHENTICATION_MODE */
-enum WLAN_802_11_AUTHENTICATION_MODE {
-	wlan802_11authmodeopen = 0x00,
-	wlan802_11authmodeshared = 0x01,
-	wlan802_11authmodenetworkEAP = 0x80,
-};
-
-/** WLAN_802_11_WEP_STATUS */
-enum WLAN_802_11_WEP_STATUS {
-	wlan802_11WEPenabled,
-	wlan802_11WEPdisabled,
-};
-
 /** SNMP_MIB_INDEX_e */
 enum SNMP_MIB_INDEX_e {
 	desired_bsstype_i = 0,

drivers/net/wireless/libertas/dev.h

@@ -10,6 +10,7 @@
 #include <linux/wireless.h>
 #include <linux/ethtool.h>
 #include <linux/debugfs.h>
+#include <net/ieee80211.h>
 
 #include "defs.h"
 #include "scan.h"
@@ -56,10 +57,8 @@ struct region_channel {
 struct wlan_802_11_security {
 	u8 WPAenabled;
 	u8 WPA2enabled;
-	enum WLAN_802_11_WEP_STATUS WEPstatus;
-	enum WLAN_802_11_AUTHENTICATION_MODE authmode;
-	enum WLAN_802_1X_AUTH_ALG auth1xalg;
-	enum WLAN_802_11_ENCRYPTION_MODE Encryptionmode;
+	u8 wep_enabled;
+	u8 auth_mode;
 };
 
 /** Current Basic Service Set State Structure */
@@ -184,7 +183,7 @@ struct assoc_request {
 
 	struct WLAN_802_11_SSID ssid;
 	u8 channel;
-	enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode;
+	u8 mode;
 	u8 bssid[ETH_ALEN];
 
 	/** WEP keys */
@@ -198,7 +197,6 @@ struct assoc_request {
 	struct wlan_802_11_security secinfo;
 
 	/** WPA Information Elements*/
-#define MAX_WPA_IE_LEN 64
 	u8 wpa_ie[MAX_WPA_IE_LEN];
 	u8 wpa_ie_len;
 };
@@ -254,7 +252,8 @@ struct _wlan_adapter {
 	/** current ssid/bssid related parameters*/
 	struct current_bss_params curbssparams;
 
-	enum WLAN_802_11_NETWORK_INFRASTRUCTURE inframode;
+	/* IW_MODE_* */
+	u8 mode;
 
 	struct bss_descriptor *pattemptedbssdesc;
 
@@ -339,7 +338,6 @@ struct _wlan_adapter {
 	struct WLAN_802_11_KEY wpa_unicast_key;
 
 	/** WPA Information Elements*/
-#define MAX_WPA_IE_LEN 64
 	u8 wpa_ie[MAX_WPA_IE_LEN];
 	u8 wpa_ie_len;
 

drivers/net/wireless/libertas/fw.c

@@ -194,16 +194,13 @@ static void wlan_init_adapter(wlan_private * priv)
 	adapter->scanmode = cmd_bss_type_any;
 
 	/* 802.11 specific */
-	adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
+	adapter->secinfo.wep_enabled = 0;
 	for (i = 0; i < sizeof(adapter->wep_keys) / sizeof(adapter->wep_keys[0]);
 	     i++)
 		memset(&adapter->wep_keys[i], 0, sizeof(struct WLAN_802_11_KEY));
 	adapter->wep_tx_keyidx = 0;
-	adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
-	adapter->secinfo.authmode = wlan802_11authmodeopen;
-	adapter->secinfo.auth1xalg = WLAN_1X_AUTH_ALG_NONE;
-	adapter->secinfo.Encryptionmode = CIPHER_NONE;
-	adapter->inframode = wlan802_11infrastructure;
+	adapter->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
+	adapter->mode = IW_MODE_INFRA;
 
 	adapter->assoc_req = NULL;
 

drivers/net/wireless/libertas/if_usb.c

@@ -388,7 +388,7 @@ static int __if_usb_submit_rx_urb(wlan_private * priv,
 	usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
 			  usb_rcvbulkpipe(cardp->udev,
 					  cardp->bulk_in_endpointAddr),
-			  skb->tail + IPFIELD_ALIGN_OFFSET,
+			  (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
 			  MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
 			  rinfo);
 
@@ -626,6 +626,7 @@ static void if_usb_receive(struct urb *urb)
 			    cardp->usb_event_cause);
 		if (cardp->usb_event_cause & 0xffff0000) {
 			libertas_send_tx_feedback(priv);
+			spin_unlock(&priv->adapter->driver_lock);
 			break;
 		}
 		cardp->usb_event_cause = le32_to_cpu(cardp->usb_event_cause) << 3;
@@ -775,7 +776,6 @@ int libertas_sbi_prog_firmware(wlan_private * priv)
 		return -1;
 	}
 
-#ifdef SUPPORT_BOOT_COMMAND
 	cardp->bootcmdresp = 0;
 	do {
 		int j = 0;
@@ -796,7 +796,6 @@ int libertas_sbi_prog_firmware(wlan_private * priv)
 		}
 		return -1;
 	}
-#endif
 
 	i = 0;
 	priv->adapter->fw_ready = 0;

drivers/net/wireless/libertas/if_usb.h

@@ -12,7 +12,6 @@
 #define USB8388_VID_2	0x05a3
 #define USB8388_PID_2	0x8388
 
-#ifdef SUPPORT_BOOT_COMMAND
 #define BOOT_CMD_FW_BY_USB     0x01
 #define BOOT_CMD_FW_IN_EEPROM  0x02
 #define BOOT_CMD_UPDATE_BOOT2  0x03
@@ -36,7 +35,6 @@ struct bootcmdrespStr
 	u8  u8result;
 	u8  au8dumy[2];
 };
-#endif /* SUPPORT_BOOT_COMMAND */
 
 /* read callback private data */
 struct read_cb_info {

drivers/net/wireless/libertas/join.c

@@ -15,6 +15,8 @@
 #include "join.h"
 #include "dev.h"
 
+#define AD_HOC_CAP_PRIVACY_ON 1
+
 /**
  *  @brief This function finds out the common rates between rate1 and rate2.
  *
@@ -85,7 +87,7 @@ int libertas_send_deauth(wlan_private * priv)
 	wlan_adapter *adapter = priv->adapter;
 	int ret = 0;
 
-	if (adapter->inframode == wlan802_11infrastructure &&
+	if (adapter->mode == IW_MODE_INFRA &&
 	    adapter->connect_status == libertas_connected)
 		ret = libertas_send_deauthentication(priv);
 	else
@@ -94,20 +96,6 @@ int libertas_send_deauth(wlan_private * priv)
 	return ret;
 }
 
-int libertas_do_adhocstop_ioctl(wlan_private * priv)
-{
-	wlan_adapter *adapter = priv->adapter;
-	int ret = 0;
-
-	if (adapter->inframode == wlan802_11ibss &&
-	    adapter->connect_status == libertas_connected)
-		ret = libertas_stop_adhoc_network(priv);
-	else
-		ret = -ENOTSUPP;
-
-	return ret;
-}
-
 /**
  *  @brief Associate to a specific BSS discovered in a scan
  *
@@ -207,8 +195,7 @@ int libertas_join_adhoc_network(wlan_private * priv, struct bss_descriptor * pbs
 	/* check if the requested SSID is already joined */
 	if (adapter->curbssparams.ssid.ssidlength
 	    && !libertas_SSID_cmp(&pbssdesc->ssid, &adapter->curbssparams.ssid)
-	    && (adapter->curbssparams.bssdescriptor.inframode ==
-		wlan802_11ibss)) {
+	    && (adapter->mode == IW_MODE_ADHOC)) {
 
         lbs_pr_debug(1,
 		       "ADHOC_J_CMD: New ad-hoc SSID is the same as current, "
@@ -260,130 +247,6 @@ int libertas_send_deauthentication(wlan_private * priv)
 				     0, cmd_option_waitforrsp, 0, NULL);
 }
 
-/**
- *  @brief Set Idle Off
- *
- *  @param priv         A pointer to wlan_private structure
- *  @return             0 --success, otherwise fail
- */
-int libertas_idle_off(wlan_private * priv)
-{
-	wlan_adapter *adapter = priv->adapter;
-	int ret = 0;
-	const u8 zeromac[] = { 0, 0, 0, 0, 0, 0 };
-	int i;
-
-	ENTER();
-
-	if (adapter->connect_status == libertas_disconnected) {
-		if (adapter->inframode == wlan802_11infrastructure) {
-			if (memcmp(adapter->previousbssid, zeromac,
-				   sizeof(zeromac)) != 0) {
-
-				lbs_pr_debug(1, "Previous SSID = %s\n",
-				       adapter->previousssid.ssid);
-				lbs_pr_debug(1, "Previous BSSID = "
-				       "%02x:%02x:%02x:%02x:%02x:%02x:\n",
-				       adapter->previousbssid[0],
-				       adapter->previousbssid[1],
-				       adapter->previousbssid[2],
-				       adapter->previousbssid[3],
-				       adapter->previousbssid[4],
-				       adapter->previousbssid[5]);
-
-				i = libertas_find_SSID_in_list(adapter,
-						   &adapter->previousssid,
-						   adapter->previousbssid,
-						   adapter->inframode);
-
-				if (i < 0) {
-					libertas_send_specific_BSSID_scan(priv,
-							      adapter->
-							      previousbssid,
-							      1);
-					i = libertas_find_SSID_in_list(adapter,
-							   &adapter->
-							   previousssid,
-							   adapter->
-							   previousbssid,
-							   adapter->
-							   inframode);
-				}
-
-				if (i < 0) {
-					/* If the BSSID could not be found, try just the SSID */
-					i = libertas_find_SSID_in_list(adapter,
-							   &adapter->
-							   previousssid, NULL,
-							   adapter->
-							   inframode);
-				}
-
-				if (i < 0) {
-					libertas_send_specific_SSID_scan(priv,
-							     &adapter->
-							     previousssid,
-							     1);
-					i = libertas_find_SSID_in_list(adapter,
-							   &adapter->
-							   previousssid, NULL,
-							   adapter->
-							   inframode);
-				}
-
-				if (i >= 0) {
-					ret =
-					    wlan_associate(priv,
-							   &adapter->
-							   scantable[i]);
-				}
-			}
-		} else if (adapter->inframode == wlan802_11ibss) {
-			ret = libertas_prepare_and_send_command(priv,
-						    cmd_802_11_ad_hoc_start,
-						    0,
-						    cmd_option_waitforrsp,
-						    0, &adapter->previousssid);
-		}
-	}
-	/* else it is connected */
-
-	lbs_pr_debug(1, "\nwlanidle is off");
-	LEAVE();
-	return ret;
-}
-
-/**
- *  @brief Set Idle On
- *
- *  @param priv         A pointer to wlan_private structure
- *  @return             0 --success, otherwise fail
- */
-int libertas_idle_on(wlan_private * priv)
-{
-	wlan_adapter *adapter = priv->adapter;
-	int ret = 0;
-
-	if (adapter->connect_status == libertas_connected) {
-		if (adapter->inframode == wlan802_11infrastructure) {
-			lbs_pr_debug(1, "Previous SSID = %s\n",
-			       adapter->previousssid.ssid);
-			memmove(&adapter->previousssid,
-				&adapter->curbssparams.ssid,
-				sizeof(struct WLAN_802_11_SSID));
-			libertas_send_deauth(priv);
-
-		} else if (adapter->inframode == wlan802_11ibss) {
-			ret = libertas_stop_adhoc_network(priv);
-		}
-
-	}
-
-	lbs_pr_debug(1, "\nwlanidle is on");
-
-	return ret;
-}
-
 /**
  *  @brief This function prepares command of authenticate.
  *
@@ -398,22 +261,39 @@ int libertas_cmd_80211_authenticate(wlan_private * priv,
 				 void *pdata_buf)
 {
 	wlan_adapter *adapter = priv->adapter;
-	struct cmd_ds_802_11_authenticate *pauthenticate =
-	    &cmd->params.auth;
+	struct cmd_ds_802_11_authenticate *pauthenticate = &cmd->params.auth;
+	int ret = -1;
 	u8 *bssid = pdata_buf;
 
 	cmd->command = cpu_to_le16(cmd_802_11_authenticate);
-	cmd->size =
-	    cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
+	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
 	                        + S_DS_GEN);
 
-	pauthenticate->authtype = adapter->secinfo.authmode;
+	/* translate auth mode to 802.11 defined wire value */
+	switch (adapter->secinfo.auth_mode) {
+	case IW_AUTH_ALG_OPEN_SYSTEM:
+		pauthenticate->authtype = 0x00;
+		break;
+	case IW_AUTH_ALG_SHARED_KEY:
+		pauthenticate->authtype = 0x01;
+		break;
+	case IW_AUTH_ALG_LEAP:
+		pauthenticate->authtype = 0x80;
+		break;
+	default:
+		lbs_pr_debug(1, "AUTH_CMD: invalid auth alg 0x%X\n",
+		             adapter->secinfo.auth_mode);
+		goto out;
+	}
+
 	memcpy(pauthenticate->macaddr, bssid, ETH_ALEN);
 
 	lbs_pr_debug(1, "AUTH_CMD: Bssid is : %x:%x:%x:%x:%x:%x\n",
 	       bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
+	ret = 0;
 
-	return 0;
+out:
+	return ret;
 }
 
 int libertas_cmd_80211_deauthenticate(wlan_private * priv,
@@ -550,7 +430,7 @@ int libertas_cmd_80211_associate(wlan_private * priv,
 	lbs_pr_debug(1, "ASSOC_CMD: rates->header.len = %d\n", rates->header.len);
 
 	/* set IBSS field */
-	if (pbssdesc->inframode == wlan802_11infrastructure) {
+	if (pbssdesc->mode == IW_MODE_INFRA) {
 #define CAPINFO_ESS_MODE 1
 		passo->capinfo.ess = CAPINFO_ESS_MODE;
 	}
@@ -624,7 +504,7 @@ int libertas_cmd_80211_ad_hoc_start(wlan_private * priv,
 
 	/* set the BSS type */
 	adhs->bsstype = cmd_bss_type_ibss;
-	pbssdesc->inframode = wlan802_11ibss;
+	pbssdesc->mode = IW_MODE_ADHOC;
 	adhs->beaconperiod = adapter->beaconperiod;
 
 	/* set Physical param set */
@@ -666,15 +546,12 @@ int libertas_cmd_80211_ad_hoc_start(wlan_private * priv,
 	adhs->probedelay = cpu_to_le16(cmd_scan_probe_delay_time);
 
 	/* set up privacy in adapter->scantable[i] */
-	if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
-
-#define AD_HOC_CAP_PRIVACY_ON 1
-		lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus set, privacy to WEP\n");
+	if (adapter->secinfo.wep_enabled) {
+		lbs_pr_debug(1, "ADHOC_S_CMD: WEP enabled, setting privacy on\n");
 		pbssdesc->privacy = wlan802_11privfilter8021xWEP;
 		adhs->cap.privacy = AD_HOC_CAP_PRIVACY_ON;
 	} else {
-		lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus NOT set, Setting "
-		       "privacy to ACCEPT ALL\n");
+		lbs_pr_debug(1, "ADHOC_S_CMD: WEP disabled, setting privacy off\n");
 		pbssdesc->privacy = wlan802_11privfilteracceptall;
 	}
 
@@ -786,9 +663,6 @@ int libertas_cmd_80211_ad_hoc_join(wlan_private * priv,
 	       padhocjoin->bssdescriptor.BSSID[5],
 	       padhocjoin->bssdescriptor.SSID);
 
-	lbs_pr_debug(1, "ADHOC_J_CMD: Data Rate = %x\n",
-	       (u32) padhocjoin->bssdescriptor.datarates);
-
 	/* failtimeout */
 	padhocjoin->failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT);
 
@@ -832,7 +706,7 @@ int libertas_cmd_80211_ad_hoc_join(wlan_private * priv,
 	padhocjoin->bssdescriptor.ssparamset.ibssparamset.atimwindow =
 	    cpu_to_le16(pbssdesc->atimwindow);
 
-	if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
+	if (adapter->secinfo.wep_enabled) {
 		padhocjoin->bssdescriptor.cap.privacy = AD_HOC_CAP_PRIVACY_ON;
 	}
 

drivers/net/wireless/libertas/join.h

-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
 /**
   * Interface for the wlan infrastructure and adhoc join routines
   *
@@ -40,10 +37,6 @@ extern int libertas_ret_80211_disassociate(wlan_private * priv,
 extern int libertas_ret_80211_associate(wlan_private * priv,
 				     struct cmd_ds_command *resp);
 
-extern int libertas_idle_on(wlan_private * priv);
-extern int libertas_idle_off(wlan_private * priv);
-
-extern int libertas_do_adhocstop_ioctl(wlan_private * priv);
 extern int libertas_reassociation_thread(void *data);
 
 struct WLAN_802_11_SSID;

drivers/net/wireless/libertas/main.c

@@ -21,6 +21,13 @@
 #include "debugfs.h"
 #include "assoc.h"
 
+#define DRIVER_RELEASE_VERSION "320.p0"
+const char libertas_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
+#ifdef  DEBUG
+    "-dbg"
+#endif
+    "";
+
 #ifdef ENABLE_PM
 static struct pm_dev *wlan_pm_dev = NULL;
 #endif

drivers/net/wireless/libertas/rx.c

@@ -210,7 +210,7 @@ int libertas_process_rxed_packet(wlan_private * priv, struct sk_buff *skb)
 		goto done;
 	}
 
-	lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %d = %d\n",
+	lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %zd = %zd\n",
 	       skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
 
 	lbs_dbg_hex("RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr,
@@ -364,7 +364,7 @@ static int process_rxed_802_11_packet(wlan_private * priv, struct sk_buff *skb)
 		priv->stats.rx_errors++;
 	}
 
-	lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %d = %d\n",
+	lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %zd = %zd\n",
 	       skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
 
 	/* create the exported radio header */

drivers/net/wireless/libertas/scan.h

-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
 /**
   * Interface for the wlan network scan routines
   *
@@ -10,6 +7,7 @@
 #ifndef _WLAN_SCAN_H
 #define _WLAN_SCAN_H
 
+#include <net/ieee80211.h>
 #include "hostcmd.h"
 
 /**
@@ -155,7 +153,7 @@ struct bss_descriptor {
 
 	u32 atimwindow;
 
-	enum WLAN_802_11_NETWORK_INFRASTRUCTURE inframode;
+	u8 mode;
 	u8 libertas_supported_rates[WLAN_SUPPORTED_RATES];
 
 	int extra_ie;
@@ -170,22 +168,22 @@ struct bss_descriptor {
 
 	struct ieeetypes_countryinfofullset countryinfo;
 
-	struct WPA_SUPPLICANT wpa_supplicant;
-	struct WPA_SUPPLICANT wpa2_supplicant;
-
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	u8 rsn_ie[MAX_WPA_IE_LEN];
+	size_t rsn_ie_len;
 };
 
 extern int libertas_SSID_cmp(struct WLAN_802_11_SSID *ssid1,
 		   struct WLAN_802_11_SSID *ssid2);
 extern int libertas_find_SSID_in_list(wlan_adapter * adapter, struct WLAN_802_11_SSID *ssid,
-			  u8 * bssid, int mode);
-int libertas_find_best_SSID_in_list(wlan_adapter * adapter, enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode);
-extern int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, int mode);
+			  u8 * bssid, u8 mode);
+int libertas_find_best_SSID_in_list(wlan_adapter * adapter, u8 mode);
+extern int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, u8 mode);
 
 int libertas_find_best_network_SSID(wlan_private * priv,
 			struct WLAN_802_11_SSID *pSSID,
-			enum WLAN_802_11_NETWORK_INFRASTRUCTURE preferred_mode,
-			enum WLAN_802_11_NETWORK_INFRASTRUCTURE *out_mode);
+			u8 preferred_mode, u8 *out_mode);
 
 extern int libertas_send_specific_SSID_scan(wlan_private * priv,
 				struct WLAN_802_11_SSID *prequestedssid,

drivers/net/wireless/libertas/tx.c

@@ -78,7 +78,7 @@ static int SendSinglePacket(wlan_private * priv, struct sk_buff *skb)
 			 min_t(unsigned int, skb->len, 100));
 
 	if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) {
-		lbs_pr_debug(1, "Tx error: Bad skb length %d : %d\n",
+		lbs_pr_debug(1, "Tx error: Bad skb length %d : %zd\n",
 		       skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE);
 		ret = -1;
 		goto done;

drivers/net/wireless/libertas/version.h

-#define DRIVER_RELEASE_VERSION "320.p0"
-const char libertas_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
-#ifdef  DEBUG
-    "-dbg"
-#endif
-    "";
-