iio: mxs-lradc: move TS config into suitable function

This patch moves the touchscreen type configuration into
a more suitable function. Btw this simplifies PM ops later.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/adc/mxs-lradc.c

@@ -686,6 +686,17 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
 
 static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
 {
+	/* Configure the touchscreen type */
+	if (lradc->soc == IMX28_LRADC) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				    LRADC_CTRL0);
+
+		if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+			mxs_lradc_reg_set(lradc,
+					  LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+					  LRADC_CTRL0);
+	}
+
 	mxs_lradc_setup_touch_detection(lradc);
 
 	lradc->cur_plate = LRADC_TOUCH;
@@ -1496,17 +1507,6 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
 
-	/* Configure the touchscreen type */
-	if (lradc->soc == IMX28_LRADC) {
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-				    LRADC_CTRL0);
-
-		if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
-			mxs_lradc_reg_set(lradc,
-					  LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-					  LRADC_CTRL0);
-	}
-
 	/* Start internal temperature sensing. */
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);