Skip to content

L
linux
Commit 9d5e27cb authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files
Options

media: dvb frontend docs: use kernel-doc documentation 

Now that frontend.h contains most documentation for the frontend,
remove the duplicated information from Documentation/ and use the
kernel-doc auto-generated one instead.

That should simplify maintainership of DVB frontend uAPI, as most
of the documentation will stick with the header file.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 8220ead8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 602 additions and 2148 deletions
Documentation/media/frontend.h.rst.exceptions
View file @ 9d5e27cb
......@@ -25,19 +25,9 @@ ignore define DTV_MAX_COMMAND
ignore define MAX_DTV_STATS
ignore define DTV_IOCTL_MAX_MSGS
# Stats enum is documented altogether
replace enum fecap_scale_params :ref:`frontend-stat-properties`
replace symbol FE_SCALE_COUNTER frontend-stat-properties
replace symbol FE_SCALE_DECIBEL frontend-stat-properties
replace symbol FE_SCALE_NOT_AVAILABLE frontend-stat-properties
replace symbol FE_SCALE_RELATIVE frontend-stat-properties
# the same reference is used for both get and set ioctls
replace ioctl FE_SET_PROPERTY :c:type:`FE_GET_PROPERTY`
# Ignore struct used only internally at Kernel
ignore struct dtv_cmds_h
# Typedefs that use the enum reference
replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage`
......@@ -45,3 +35,178 @@ replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage`
replace define FE_TUNE_MODE_ONESHOT :c:func:`FE_SET_FRONTEND_TUNE_MODE`
replace define LNA_AUTO dtv-lna
replace define NO_STREAM_ID_FILTER dtv-stream-id
# Those enums are defined at the frontend.h header, and not externally
ignore symbol FE_IS_STUPID
ignore symbol FE_CAN_INVERSION_AUTO
ignore symbol FE_CAN_FEC_1_2
ignore symbol FE_CAN_FEC_2_3
ignore symbol FE_CAN_FEC_3_4
ignore symbol FE_CAN_FEC_4_5
ignore symbol FE_CAN_FEC_5_6
ignore symbol FE_CAN_FEC_6_7
ignore symbol FE_CAN_FEC_7_8
ignore symbol FE_CAN_FEC_8_9
ignore symbol FE_CAN_FEC_AUTO
ignore symbol FE_CAN_QPSK
ignore symbol FE_CAN_QAM_16
ignore symbol FE_CAN_QAM_32
ignore symbol FE_CAN_QAM_64
ignore symbol FE_CAN_QAM_128
ignore symbol FE_CAN_QAM_256
ignore symbol FE_CAN_QAM_AUTO
ignore symbol FE_CAN_TRANSMISSION_MODE_AUTO
ignore symbol FE_CAN_BANDWIDTH_AUTO
ignore symbol FE_CAN_GUARD_INTERVAL_AUTO
ignore symbol FE_CAN_HIERARCHY_AUTO
ignore symbol FE_CAN_8VSB
ignore symbol FE_CAN_16VSB
ignore symbol FE_HAS_EXTENDED_CAPS
ignore symbol FE_CAN_MULTISTREAM
ignore symbol FE_CAN_TURBO_FEC
ignore symbol FE_CAN_2G_MODULATION
ignore symbol FE_NEEDS_BENDING
ignore symbol FE_CAN_RECOVER
ignore symbol FE_CAN_MUTE_TS
ignore symbol QPSK
ignore symbol QAM_16
ignore symbol QAM_32
ignore symbol QAM_64
ignore symbol QAM_128
ignore symbol QAM_256
ignore symbol QAM_AUTO
ignore symbol VSB_8
ignore symbol VSB_16
ignore symbol PSK_8
ignore symbol APSK_16
ignore symbol APSK_32
ignore symbol DQPSK
ignore symbol QAM_4_NR
ignore symbol SEC_VOLTAGE_13
ignore symbol SEC_VOLTAGE_18
ignore symbol SEC_VOLTAGE_OFF
ignore symbol SEC_TONE_ON
ignore symbol SEC_TONE_OFF
ignore symbol SEC_MINI_A
ignore symbol SEC_MINI_B
ignore symbol FE_NONE
ignore symbol FE_HAS_SIGNAL
ignore symbol FE_HAS_CARRIER
ignore symbol FE_HAS_VITERBI
ignore symbol FE_HAS_SYNC
ignore symbol FE_HAS_LOCK
ignore symbol FE_REINIT
ignore symbol FE_TIMEDOUT
ignore symbol FEC_NONE
ignore symbol FEC_1_2
ignore symbol FEC_2_3
ignore symbol FEC_3_4
ignore symbol FEC_4_5
ignore symbol FEC_5_6
ignore symbol FEC_6_7
ignore symbol FEC_7_8
ignore symbol FEC_8_9
ignore symbol FEC_AUTO
ignore symbol FEC_3_5
ignore symbol FEC_9_10
ignore symbol FEC_2_5
ignore symbol TRANSMISSION_MODE_AUTO
ignore symbol TRANSMISSION_MODE_1K
ignore symbol TRANSMISSION_MODE_2K
ignore symbol TRANSMISSION_MODE_8K
ignore symbol TRANSMISSION_MODE_4K
ignore symbol TRANSMISSION_MODE_16K
ignore symbol TRANSMISSION_MODE_32K
ignore symbol TRANSMISSION_MODE_C1
ignore symbol TRANSMISSION_MODE_C3780
ignore symbol TRANSMISSION_MODE_2K
ignore symbol TRANSMISSION_MODE_8K
ignore symbol GUARD_INTERVAL_AUTO
ignore symbol GUARD_INTERVAL_1_128
ignore symbol GUARD_INTERVAL_1_32
ignore symbol GUARD_INTERVAL_1_16
ignore symbol GUARD_INTERVAL_1_8
ignore symbol GUARD_INTERVAL_1_4
ignore symbol GUARD_INTERVAL_19_128
ignore symbol GUARD_INTERVAL_19_256
ignore symbol GUARD_INTERVAL_PN420
ignore symbol GUARD_INTERVAL_PN595
ignore symbol GUARD_INTERVAL_PN945
ignore symbol HIERARCHY_NONE
ignore symbol HIERARCHY_AUTO
ignore symbol HIERARCHY_1
ignore symbol HIERARCHY_2
ignore symbol HIERARCHY_4
ignore symbol INTERLEAVING_NONE
ignore symbol INTERLEAVING_AUTO
ignore symbol INTERLEAVING_240
ignore symbol INTERLEAVING_720
ignore symbol PILOT_ON
ignore symbol PILOT_OFF
ignore symbol PILOT_AUTO
ignore symbol ROLLOFF_35
ignore symbol ROLLOFF_20
ignore symbol ROLLOFF_25
ignore symbol ROLLOFF_AUTO
ignore symbol INVERSION_ON
ignore symbol INVERSION_OFF
ignore symbol INVERSION_AUTO
ignore symbol SYS_UNDEFINED
ignore symbol SYS_DVBC_ANNEX_A
ignore symbol SYS_DVBC_ANNEX_B
ignore symbol SYS_DVBC_ANNEX_C
ignore symbol SYS_ISDBC
ignore symbol SYS_DVBT
ignore symbol SYS_DVBT2
ignore symbol SYS_ISDBT
ignore symbol SYS_ATSC
ignore symbol SYS_ATSCMH
ignore symbol SYS_DTMB
ignore symbol SYS_DVBS
ignore symbol SYS_DVBS2
ignore symbol SYS_TURBO
ignore symbol SYS_ISDBS
ignore symbol SYS_DAB
ignore symbol SYS_DSS
ignore symbol SYS_CMMB
ignore symbol SYS_DVBH
ignore symbol ATSCMH_SCCC_BLK_SEP
ignore symbol ATSCMH_SCCC_BLK_COMB
ignore symbol ATSCMH_SCCC_BLK_RES
ignore symbol ATSCMH_SCCC_CODE_HLF
ignore symbol ATSCMH_SCCC_CODE_QTR
ignore symbol ATSCMH_SCCC_CODE_RES
ignore symbol ATSCMH_RSFRAME_ENS_PRI
ignore symbol ATSCMH_RSFRAME_ENS_SEC
ignore symbol ATSCMH_RSFRAME_PRI_ONLY
ignore symbol ATSCMH_RSFRAME_PRI_SEC
ignore symbol ATSCMH_RSFRAME_RES
ignore symbol ATSCMH_RSCODE_211_187
ignore symbol ATSCMH_RSCODE_223_187
ignore symbol ATSCMH_RSCODE_235_187
ignore symbol ATSCMH_RSCODE_RES
ignore symbol FE_SCALE_NOT_AVAILABLE
ignore symbol FE_SCALE_DECIBEL
ignore symbol FE_SCALE_RELATIVE
ignore symbol FE_SCALE_COUNTER
Documentation/media/uapi/dvb/dtv-fe-stats.rst deleted 100644 → 0
View file @ 8220ead8
.. -*- coding: utf-8; mode: rst -*-
.. c:type:: dtv_fe_stats
*******************
struct dtv_fe_stats
*******************
.. code-block:: c
#define MAX_DTV_STATS 4
struct dtv_fe_stats {
__u8 len;
struct dtv_stats stat[MAX_DTV_STATS];
} __packed;
Documentation/media/uapi/dvb/dtv-properties.rst deleted 100644 → 0
View file @ 8220ead8
.. -*- coding: utf-8; mode: rst -*-
.. c:type:: dtv_properties
*********************
struct dtv_properties
*********************
.. code-block:: c
struct dtv_properties {
__u32 num;
struct dtv_property *props;
};
Documentation/media/uapi/dvb/dtv-property.rst deleted 100644 → 0
View file @ 8220ead8
.. -*- coding: utf-8; mode: rst -*-
.. c:type:: dtv_property
*******************
struct dtv_property
*******************
.. code-block:: c
/* Reserved fields should be set to 0 */
struct dtv_property {
__u32 cmd;
__u32 reserved[3];
union {
__u32 data;
struct dtv_fe_stats st;
struct {
__u8 data[32];
__u32 len;
__u32 reserved1[3];
void *reserved2;
} buffer;
} u;
int result;
} __attribute__ ((packed));
/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
#define DTV_IOCTL_MAX_MSGS 64
Documentation/media/uapi/dvb/dtv-stats.rst deleted 100644 → 0
View file @ 8220ead8
.. -*- coding: utf-8; mode: rst -*-
.. c:type:: dtv_stats
****************
struct dtv_stats
****************
.. code-block:: c
struct dtv_stats {
__u8 scale; /* enum fecap_scale_params type */
union {
__u64 uvalue; /* for counters and relative scales */
__s64 svalue; /* for 1/1000 dB measures */
};
} __packed;
Documentation/media/uapi/dvb/dvbproperty-006.rst deleted 100644 → 0
View file @ 8220ead8
.. -*- coding: utf-8; mode: rst -*-
**************
Property types
**************
On :ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>`,
the actual action is determined by the dtv_property cmd/data pairs.
With one single ioctl, is possible to get/set up to 64 properties. The
actual meaning of each property is described on the next sections.
The available frontend property types are shown on the next section.
Documentation/media/uapi/dvb/dvbproperty.rst
View file @ 9d5e27cb
......@@ -2,8 +2,9 @@
.. _frontend-properties:
DVB Frontend properties
=======================
**************
Property types
**************
Tuning into a Digital TV physical channel and starting decoding it
requires changing a set of parameters, in order to control the tuner,
......@@ -20,10 +21,15 @@ enough to group the structs that would be required for those new
standards. Also, extending it would break userspace.
So, the legacy union/struct based approach was deprecated, in favor
of a properties set approach.
of a properties set approach. On such approach,
:ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>` are used
to setup the frontend and read its status.
The actual action is determined by a set of dtv_property cmd/data pairs.
With one single ioctl, is possible to get/set up to 64 properties.
This section describes the new and recommended way to set the frontend,
with suppports all digital TV delivery systems.
with supports all digital TV delivery systems.
.. note::
......@@ -63,12 +69,9 @@ Mbauds, those properties should be sent to
The code that would that would do the above is show in
:ref:`dtv-prop-example`.
.. _dtv-prop-example:
Example: Setting digital TV frontend properties
===============================================
.. code-block:: c
:caption: Example: Setting digital TV frontend properties
:name: dtv-prop-example
#include <stdio.h>
#include <fcntl.h>
......@@ -112,17 +115,12 @@ Example: Setting digital TV frontend properties
provides methods for usual operations like program scanning and to
read/write channel descriptor files.
.. toctree::
:maxdepth: 1
dtv-stats
dtv-fe-stats
dtv-property
dtv-properties
dvbproperty-006
fe_property_parameters
frontend-stat-properties
frontend-property-terrestrial-systems
frontend-property-cable-systems
frontend-property-satellite-systems
frontend-header
Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst
View file @ 9d5e27cb
......@@ -26,8 +26,7 @@ Arguments
File descriptor returned by :ref:`open() <frontend_f_open>`.
``argp``
pointer to struct
:c:type:`dvb_diseqc_slave_reply`
pointer to struct :c:type:`dvb_diseqc_slave_reply`.
Description
......@@ -35,42 +34,7 @@ Description
Receives reply from a DiSEqC 2.0 command.
.. c:type:: dvb_diseqc_slave_reply
.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
.. flat-table:: struct dvb_diseqc_slave_reply
:header-rows: 0
:stub-columns: 0
:widths: 1 1 2
- .. row 1
- uint8_t
- msg[4]
- DiSEqC message (framing, data[3])
- .. row 2
- uint8_t
- msg_len
- Length of the DiSEqC message. Valid values are 0 to 4, where 0
means no msg
- .. row 3
- int
- timeout
- Return from ioctl after timeout ms with errorcode when no message
was received
The received message is stored at the buffer pointed by ``argp``.
Return Value
============
......
Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst
View file @ 9d5e27cb
......@@ -26,7 +26,7 @@ Arguments
File descriptor returned by :ref:`open() <frontend_f_open>`.
``tone``
an integer enumered value described at :c:type:`fe_sec_mini_cmd`
An integer enumered value described at :c:type:`fe_sec_mini_cmd`.
Description
......@@ -39,35 +39,6 @@ read/write permissions.
It provides support for what's specified at
`Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__
.. c:type:: fe_sec_mini_cmd
.. flat-table:: enum fe_sec_mini_cmd
:header-rows: 1
:stub-columns: 0
- .. row 1
- ID
- Description
- .. row 2
- .. _SEC-MINI-A:
``SEC_MINI_A``
- Sends a mini-DiSEqC 22kHz '0' Tone Burst to select satellite-A
- .. row 3
- .. _SEC-MINI-B:
``SEC_MINI_B``
- Sends a mini-DiSEqC 22kHz '1' Data Burst to select satellite-B
Return Value
============
......
Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst
View file @ 9d5e27cb
......@@ -33,34 +33,7 @@ Arguments
Description
===========
Sends a DiSEqC command to the antenna subsystem.
.. c:type:: dvb_diseqc_master_cmd
.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
.. flat-table:: struct dvb_diseqc_master_cmd
:header-rows: 0
:stub-columns: 0
:widths: 1 1 2
- .. row 1
- uint8_t
- msg[6]
- DiSEqC message (framing, address, command, data[3])
- .. row 2
- uint8_t
- msg_len
- Length of the DiSEqC message. Valid values are 3 to 6
Sends the DiSEqC command pointed by ``argp`` to the antenna subsystem.
Return Value
============
......
Documentation/media/uapi/dvb/fe-get-info.rst
View file @ 9d5e27cb
......@@ -40,112 +40,6 @@ takes a pointer to dvb_frontend_info which is filled by the driver.
When the driver is not compatible with this specification the ioctl
returns an error.
.. c:type:: dvb_frontend_info
.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
.. flat-table:: struct dvb_frontend_info
:header-rows: 0
:stub-columns: 0
:widths: 1 1 2
- .. row 1
- char
- name[128]
- Name of the frontend
- .. row 2
- fe_type_t
- type
- **DEPRECATED**. DVBv3 type. Should not be used on modern programs,
as a frontend may have more than one type. So, the DVBv5 API
should be used instead to enumerate and select the frontend type.
- .. row 3
- uint32_t
- frequency_min
- Minimal frequency supported by the frontend
- .. row 4
- uint32_t
- frequency_max
- Maximal frequency supported by the frontend
- .. row 5
- uint32_t
- frequency_stepsize
- Frequency step - all frequencies are multiple of this value
- .. row 6
- uint32_t
- frequency_tolerance
- Tolerance of the frequency
- .. row 7
- uint32_t
- symbol_rate_min
- Minimal symbol rate (for Cable/Satellite systems), in bauds
- .. row 8
- uint32_t
- symbol_rate_max
- Maximal symbol rate (for Cable/Satellite systems), in bauds
- .. row 9
- uint32_t
- symbol_rate_tolerance
- Maximal symbol rate tolerance, in ppm
- .. row 10
- uint32_t
- notifier_delay
- **DEPRECATED**. Not used by any driver.
- .. row 11
- enum :c:type:`fe_caps`
- caps
- Capabilities supported by the frontend
.. note::
The frequencies are specified in Hz for Terrestrial and Cable
systems. They're specified in kHz for Satellite systems
frontend capabilities
=====================
......@@ -153,269 +47,7 @@ frontend capabilities
Capabilities describe what a frontend can do. Some capabilities are
supported only on some specific frontend types.
.. c:type:: fe_caps
.. tabularcolumns:: |p{6.5cm}|p{11.0cm}|
.. flat-table:: enum fe_caps
:header-rows: 1
:stub-columns: 0
- .. row 1
- ID
- Description
- .. row 2
- .. _FE-IS-STUPID:
``FE_IS_STUPID``
- There's something wrong at the frontend, and it can't report its
capabilities
- .. row 3
- .. _FE-CAN-INVERSION-AUTO:
``FE_CAN_INVERSION_AUTO``
- The frontend is capable of auto-detecting inversion
- .. row 4
- .. _FE-CAN-FEC-1-2:
``FE_CAN_FEC_1_2``
- The frontend supports FEC 1/2
- .. row 5
- .. _FE-CAN-FEC-2-3:
``FE_CAN_FEC_2_3``
- The frontend supports FEC 2/3
- .. row 6
- .. _FE-CAN-FEC-3-4:
``FE_CAN_FEC_3_4``
- The frontend supports FEC 3/4
- .. row 7
- .. _FE-CAN-FEC-4-5:
``FE_CAN_FEC_4_5``
- The frontend supports FEC 4/5
- .. row 8
- .. _FE-CAN-FEC-5-6:
``FE_CAN_FEC_5_6``
- The frontend supports FEC 5/6
- .. row 9
- .. _FE-CAN-FEC-6-7:
``FE_CAN_FEC_6_7``
- The frontend supports FEC 6/7
- .. row 10
- .. _FE-CAN-FEC-7-8:
``FE_CAN_FEC_7_8``
- The frontend supports FEC 7/8
- .. row 11
- .. _FE-CAN-FEC-8-9:
``FE_CAN_FEC_8_9``
- The frontend supports FEC 8/9
- .. row 12
- .. _FE-CAN-FEC-AUTO:
``FE_CAN_FEC_AUTO``
- The frontend can autodetect FEC.
- .. row 13
- .. _FE-CAN-QPSK:
``FE_CAN_QPSK``
- The frontend supports QPSK modulation
- .. row 14
- .. _FE-CAN-QAM-16:
``FE_CAN_QAM_16``
- The frontend supports 16-QAM modulation
- .. row 15
- .. _FE-CAN-QAM-32:
``FE_CAN_QAM_32``
- The frontend supports 32-QAM modulation
- .. row 16
- .. _FE-CAN-QAM-64:
``FE_CAN_QAM_64``
- The frontend supports 64-QAM modulation
- .. row 17
- .. _FE-CAN-QAM-128:
``FE_CAN_QAM_128``
- The frontend supports 128-QAM modulation
- .. row 18
- .. _FE-CAN-QAM-256:
``FE_CAN_QAM_256``
- The frontend supports 256-QAM modulation
- .. row 19
- .. _FE-CAN-QAM-AUTO:
``FE_CAN_QAM_AUTO``
- The frontend can autodetect modulation
- .. row 20
- .. _FE-CAN-TRANSMISSION-MODE-AUTO:
``FE_CAN_TRANSMISSION_MODE_AUTO``
- The frontend can autodetect the transmission mode
- .. row 21
- .. _FE-CAN-BANDWIDTH-AUTO:
``FE_CAN_BANDWIDTH_AUTO``
- The frontend can autodetect the bandwidth
- .. row 22
- .. _FE-CAN-GUARD-INTERVAL-AUTO:
``FE_CAN_GUARD_INTERVAL_AUTO``
- The frontend can autodetect the guard interval
- .. row 23
- .. _FE-CAN-HIERARCHY-AUTO:
``FE_CAN_HIERARCHY_AUTO``
- The frontend can autodetect hierarch
- .. row 24
- .. _FE-CAN-8VSB:
``FE_CAN_8VSB``
- The frontend supports 8-VSB modulation
- .. row 25
- .. _FE-CAN-16VSB:
``FE_CAN_16VSB``
- The frontend supports 16-VSB modulation
- .. row 26
- .. _FE-HAS-EXTENDED-CAPS:
``FE_HAS_EXTENDED_CAPS``
- Currently, unused
- .. row 27
- .. _FE-CAN-MULTISTREAM:
``FE_CAN_MULTISTREAM``
- The frontend supports multistream filtering
- .. row 28
- .. _FE-CAN-TURBO-FEC:
``FE_CAN_TURBO_FEC``
- The frontend supports turbo FEC modulation
- .. row 29
- .. _FE-CAN-2G-MODULATION:
``FE_CAN_2G_MODULATION``
- The frontend supports "2nd generation modulation" (DVB-S2/T2)>
- .. row 30
- .. _FE-NEEDS-BENDING:
``FE_NEEDS_BENDING``
- Not supported anymore, don't use it
- .. row 31
- .. _FE-CAN-RECOVER:
``FE_CAN_RECOVER``
- The frontend can recover from a cable unplug automatically
- .. row 32
- .. _FE-CAN-MUTE-TS:
``FE_CAN_MUTE_TS``
- The frontend can stop spurious TS data output
The frontend capabilities are described at :c:type:`fe_caps`.
Return Value
......
Documentation/media/uapi/dvb/fe-get-property.rst
View file @ 9d5e27cb
......@@ -29,7 +29,7 @@ Arguments
File descriptor returned by :ref:`open() <frontend_f_open>`.
``argp``
pointer to struct :c:type:`dtv_properties`
Pointer to struct :c:type:`dtv_properties`.
Description
......
Documentation/media/uapi/dvb/fe-read-status.rst
View file @ 9d5e27cb
......@@ -52,89 +52,6 @@ The fe_status parameter is used to indicate the current state and/or
state changes of the frontend hardware. It is produced using the enum
:c:type:`fe_status` values on a bitmask
.. c:type:: fe_status
.. tabularcolumns:: |p{3.5cm}|p{14.0cm}|
.. _fe-status:
.. flat-table:: enum fe_status
:header-rows: 1
:stub-columns: 0
- .. row 1
- ID
- Description
- .. row 2
- .. _FE-NONE:
``FE_NONE``
- The frontend doesn't have any kind of lock. That's the initial frontend status
- .. row 3
- .. _FE-HAS-SIGNAL:
``FE_HAS_SIGNAL``
- The frontend has found something above the noise level
- .. row 4
- .. _FE-HAS-CARRIER:
``FE_HAS_CARRIER``
- The frontend has found a DVB signal
- .. row 5
- .. _FE-HAS-VITERBI:
``FE_HAS_VITERBI``
- The frontend FEC inner coding (Viterbi, LDPC or other inner code)
is stable
- .. row 6
- .. _FE-HAS-SYNC:
``FE_HAS_SYNC``
- Synchronization bytes was found
- .. row 7
- .. _FE-HAS-LOCK:
``FE_HAS_LOCK``
- The DVB were locked and everything is working
- .. row 8
- .. _FE-TIMEDOUT:
``FE_TIMEDOUT``
- no lock within the last about 2 seconds
- .. row 9
- .. _FE-REINIT:
``FE_REINIT``
- The frontend was reinitialized, application is recommended to
reset DiSEqC, tone and parameters
Return Value
============
......
Documentation/media/uapi/dvb/fe-set-tone.rst
View file @ 9d5e27cb
......@@ -45,36 +45,6 @@ this is done using the DiSEqC ioctls.
capability of selecting the band. So, it is recommended that applications
would change to SEC_TONE_OFF when the device is not used.
.. c:type:: fe_sec_tone_mode
.. flat-table:: enum fe_sec_tone_mode
:header-rows: 1
:stub-columns: 0
- .. row 1
- ID
- Description
- .. row 2
- .. _SEC-TONE-ON:
``SEC_TONE_ON``
- Sends a 22kHz tone burst to the antenna
- .. row 3
- .. _SEC-TONE-OFF:
``SEC_TONE_OFF``
- Don't send a 22kHz tone to the antenna (except if the
FE_DISEQC_* ioctls are called)
Return Value
============
......
Documentation/media/uapi/dvb/frontend-header.rst 0 → 100644
View file @ 9d5e27cb
Frontend uAPI data types
========================
.. kernel-doc:: include/uapi/linux/dvb/frontend.h
include/uapi/linux/dvb/frontend.h
View file @ 9d5e27cb
......@@ -562,10 +562,10 @@ enum fe_pilot {
};
/**
* enum fe_rolloff - Rolloff factor (also known as alpha)
* @ROLLOFF_35: Roloff factor: 35%
* @ROLLOFF_20: Roloff factor: 20%
* @ROLLOFF_25: Roloff factor: 25%
* enum fe_rolloff - Rolloff factor
* @ROLLOFF_35: Roloff factor: α=35%
* @ROLLOFF_20: Roloff factor: α=20%
* @ROLLOFF_25: Roloff factor: α=25%
* @ROLLOFF_AUTO: Auto-detect the roloff factor.
*
* .. note:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7