Merge branch 'x86/asm' into x86/core, to prepare for new patch

Collect all changes to arch/x86/entry/entry_64.S, before applying
patch that changes most of the file.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/x86/entry_64.txt

@@ -18,10 +18,10 @@ Some of these entries are:
 
  - system_call: syscall instruction from 64-bit code.
 
- - ia32_syscall: int 0x80 from 32-bit or 64-bit code; compat syscall
+ - entry_INT80_compat: int 0x80 from 32-bit or 64-bit code; compat syscall
    either way.
 
- - ia32_syscall, ia32_sysenter: syscall and sysenter from 32-bit
+ - entry_INT80_compat, ia32_sysenter: syscall and sysenter from 32-bit
    code
 
  - interrupt: An array of entries.  Every IDT vector that doesn't

MAINTAINERS

@@ -10893,7 +10893,7 @@ M:	Andy Lutomirski <luto@amacapital.net>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
 S:	Maintained
-F:	arch/x86/vdso/
+F:	arch/x86/entry/vdso/
 
 XC2028/3028 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>

arch/x86/Kbuild

+
+obj-y += entry/
+
 obj-$(CONFIG_KVM) += kvm/
 
 # Xen paravirtualization support
@@ -11,7 +14,7 @@ obj-y += kernel/
 obj-y += mm/
 
 obj-y += crypto/
-obj-y += vdso/
+
 obj-$(CONFIG_IA32_EMULATION) += ia32/
 
 obj-y += platform/

arch/x86/Makefile

@@ -149,12 +149,6 @@ endif
 sp-$(CONFIG_X86_32) := esp
 sp-$(CONFIG_X86_64) := rsp
 
-# do binutils support CFI?
-cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
-# is .cfi_signal_frame supported too?
-cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
-
 # does binutils support specific instructions?
 asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
 asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
@@ -162,8 +156,8 @@ asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1)
 avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
 avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
 
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
+KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 
@@ -187,7 +181,7 @@ archscripts: scripts_basic
 # Syscall table generation
 
 archheaders:
-	$(Q)$(MAKE) $(build)=arch/x86/syscalls all
+	$(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
 
 archprepare:
 ifeq ($(CONFIG_KEXEC_FILE),y)
@@ -250,7 +244,7 @@ install:
 
 PHONY += vdso_install
 vdso_install:
-	$(Q)$(MAKE) $(build)=arch/x86/vdso $@
+	$(Q)$(MAKE) $(build)=arch/x86/entry/vdso $@
 
 archclean:
 	$(Q)rm -rf $(objtree)/arch/i386

arch/x86/entry/Makefile

+#
+# Makefile for the x86 low level entry code
+#
+obj-y				:= entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
+
+obj-y				+= vdso/
+obj-y				+= vsyscall/
+
+obj-$(CONFIG_IA32_EMULATION)	+= entry_64_compat.o syscall_32.o
+

arch/x86/include/asm/calling.h → arch/x86/entry/calling.h

@@ -46,8 +46,6 @@ For 32-bit we have the following conventions - kernel is built with
 
 */
 
-#include <asm/dwarf2.h>
-
 #ifdef CONFIG_X86_64
 
 /*
@@ -91,28 +89,27 @@ For 32-bit we have the following conventions - kernel is built with
 #define SIZEOF_PTREGS	21*8
 
 	.macro ALLOC_PT_GPREGS_ON_STACK addskip=0
-	subq	$15*8+\addskip, %rsp
-	CFI_ADJUST_CFA_OFFSET 15*8+\addskip
+	addq	$-(15*8+\addskip), %rsp
 	.endm
 
 	.macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
 	.if \r11
-	movq_cfi r11, 6*8+\offset
+	movq %r11, 6*8+\offset(%rsp)
 	.endif
 	.if \r8910
-	movq_cfi r10, 7*8+\offset
-	movq_cfi r9,  8*8+\offset
-	movq_cfi r8,  9*8+\offset
+	movq %r10, 7*8+\offset(%rsp)
+	movq %r9,  8*8+\offset(%rsp)
+	movq %r8,  9*8+\offset(%rsp)
 	.endif
 	.if \rax
-	movq_cfi rax, 10*8+\offset
+	movq %rax, 10*8+\offset(%rsp)
 	.endif
 	.if \rcx
-	movq_cfi rcx, 11*8+\offset
+	movq %rcx, 11*8+\offset(%rsp)
 	.endif
-	movq_cfi rdx, 12*8+\offset
-	movq_cfi rsi, 13*8+\offset
-	movq_cfi rdi, 14*8+\offset
+	movq %rdx, 12*8+\offset(%rsp)
+	movq %rsi, 13*8+\offset(%rsp)
+	movq %rdi, 14*8+\offset(%rsp)
 	.endm
 	.macro SAVE_C_REGS offset=0
 	SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
@@ -131,24 +128,24 @@ For 32-bit we have the following conventions - kernel is built with
 	.endm
 
 	.macro SAVE_EXTRA_REGS offset=0
-	movq_cfi r15, 0*8+\offset
-	movq_cfi r14, 1*8+\offset
-	movq_cfi r13, 2*8+\offset
-	movq_cfi r12, 3*8+\offset
-	movq_cfi rbp, 4*8+\offset
-	movq_cfi rbx, 5*8+\offset
+	movq %r15, 0*8+\offset(%rsp)
+	movq %r14, 1*8+\offset(%rsp)
+	movq %r13, 2*8+\offset(%rsp)
+	movq %r12, 3*8+\offset(%rsp)
+	movq %rbp, 4*8+\offset(%rsp)
+	movq %rbx, 5*8+\offset(%rsp)
 	.endm
 	.macro SAVE_EXTRA_REGS_RBP offset=0
-	movq_cfi rbp, 4*8+\offset
+	movq %rbp, 4*8+\offset(%rsp)
 	.endm
 
 	.macro RESTORE_EXTRA_REGS offset=0
-	movq_cfi_restore 0*8+\offset, r15
-	movq_cfi_restore 1*8+\offset, r14
-	movq_cfi_restore 2*8+\offset, r13
-	movq_cfi_restore 3*8+\offset, r12
-	movq_cfi_restore 4*8+\offset, rbp
-	movq_cfi_restore 5*8+\offset, rbx
+	movq 0*8+\offset(%rsp), %r15
+	movq 1*8+\offset(%rsp), %r14
+	movq 2*8+\offset(%rsp), %r13
+	movq 3*8+\offset(%rsp), %r12
+	movq 4*8+\offset(%rsp), %rbp
+	movq 5*8+\offset(%rsp), %rbx
 	.endm
 
 	.macro ZERO_EXTRA_REGS
@@ -162,24 +159,24 @@ For 32-bit we have the following conventions - kernel is built with
 
 	.macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1
 	.if \rstor_r11
-	movq_cfi_restore 6*8, r11
+	movq 6*8(%rsp), %r11
 	.endif
 	.if \rstor_r8910
-	movq_cfi_restore 7*8, r10
-	movq_cfi_restore 8*8, r9
-	movq_cfi_restore 9*8, r8
+	movq 7*8(%rsp), %r10
+	movq 8*8(%rsp), %r9
+	movq 9*8(%rsp), %r8
 	.endif
 	.if \rstor_rax
-	movq_cfi_restore 10*8, rax
+	movq 10*8(%rsp), %rax
 	.endif
 	.if \rstor_rcx
-	movq_cfi_restore 11*8, rcx
+	movq 11*8(%rsp), %rcx
 	.endif
 	.if \rstor_rdx
-	movq_cfi_restore 12*8, rdx
+	movq 12*8(%rsp), %rdx
 	.endif
-	movq_cfi_restore 13*8, rsi
-	movq_cfi_restore 14*8, rdi
+	movq 13*8(%rsp), %rsi
+	movq 14*8(%rsp), %rdi
 	.endm
 	.macro RESTORE_C_REGS
 	RESTORE_C_REGS_HELPER 1,1,1,1,1
@@ -204,8 +201,7 @@ For 32-bit we have the following conventions - kernel is built with
 	.endm
 
 	.macro REMOVE_PT_GPREGS_FROM_STACK addskip=0
-	addq $15*8+\addskip, %rsp
-	CFI_ADJUST_CFA_OFFSET -(15*8+\addskip)
+	subq $-(15*8+\addskip), %rsp
 	.endm
 
 	.macro icebp
@@ -224,23 +220,23 @@ For 32-bit we have the following conventions - kernel is built with
  */
 
 	.macro SAVE_ALL
-	pushl_cfi_reg eax
-	pushl_cfi_reg ebp
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
-	pushl_cfi_reg edx
-	pushl_cfi_reg ecx
-	pushl_cfi_reg ebx
+	pushl %eax
+	pushl %ebp
+	pushl %edi
+	pushl %esi
+	pushl %edx
+	pushl %ecx
+	pushl %ebx
 	.endm
 
 	.macro RESTORE_ALL
-	popl_cfi_reg ebx
-	popl_cfi_reg ecx
-	popl_cfi_reg edx
-	popl_cfi_reg esi
-	popl_cfi_reg edi
-	popl_cfi_reg ebp
-	popl_cfi_reg eax
+	popl %ebx
+	popl %ecx
+	popl %edx
+	popl %esi
+	popl %edi
+	popl %ebp
+	popl %eax
 	.endm
 
 #endif /* CONFIG_X86_64 */

arch/x86/kernel/syscall_32.c → arch/x86/entry/syscall_32.c

@@ -10,7 +10,7 @@
 #else
 #define SYM(sym, compat) sym
 #define ia32_sys_call_table sys_call_table
-#define __NR_ia32_syscall_max __NR_syscall_max
+#define __NR_entry_INT80_compat_max __NR_syscall_max
 #endif
 
 #define __SYSCALL_I386(nr, sym, compat) extern asmlinkage void SYM(sym, compat)(void) ;
@@ -23,11 +23,11 @@ typedef asmlinkage void (*sys_call_ptr_t)(void);
 
 extern asmlinkage void sys_ni_syscall(void);
 
-__visible const sys_call_ptr_t ia32_sys_call_table[__NR_ia32_syscall_max+1] = {
+__visible const sys_call_ptr_t ia32_sys_call_table[__NR_entry_INT80_compat_max+1] = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
 	 */
-	[0 ... __NR_ia32_syscall_max] = &sys_ni_syscall,
+	[0 ... __NR_entry_INT80_compat_max] = &sys_ni_syscall,
 #include <asm/syscalls_32.h>
 };

arch/x86/syscalls/Makefile → arch/x86/entry/syscalls/Makefile

-out := $(obj)/../include/generated/asm
-uapi := $(obj)/../include/generated/uapi/asm
+out := $(obj)/../../include/generated/asm
+uapi := $(obj)/../../include/generated/uapi/asm
 
 # Create output directory if not already present
 _dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)') \

arch/x86/lib/thunk_32.S → arch/x86/entry/thunk_32.S

@@ -6,16 +6,14 @@
  */
 	#include <linux/linkage.h>
 	#include <asm/asm.h>
-	#include <asm/dwarf2.h>
 
 	/* put return address in eax (arg1) */
 	.macro THUNK name, func, put_ret_addr_in_eax=0
 	.globl \name
 \name:
-	CFI_STARTPROC
-	pushl_cfi_reg eax
-	pushl_cfi_reg ecx
-	pushl_cfi_reg edx
+	pushl %eax
+	pushl %ecx
+	pushl %edx
 
 	.if \put_ret_addr_in_eax
 	/* Place EIP in the arg1 */
@@ -23,11 +21,10 @@
 	.endif
 
 	call \func
-	popl_cfi_reg edx
-	popl_cfi_reg ecx
-	popl_cfi_reg eax
+	popl %edx
+	popl %ecx
+	popl %eax
 	ret
-	CFI_ENDPROC
 	_ASM_NOKPROBE(\name)
 	.endm
 

arch/x86/lib/thunk_64.S → arch/x86/entry/thunk_64.S

@@ -6,35 +6,32 @@
  * Subject to the GNU public license, v.2. No warranty of any kind.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
+#include "calling.h"
 #include <asm/asm.h>
 
 	/* rdi:	arg1 ... normal C conventions. rax is saved/restored. */
 	.macro THUNK name, func, put_ret_addr_in_rdi=0
 	.globl \name
 \name:
-	CFI_STARTPROC
 
 	/* this one pushes 9 elems, the next one would be %rIP */
-	pushq_cfi_reg rdi
-	pushq_cfi_reg rsi
-	pushq_cfi_reg rdx
-	pushq_cfi_reg rcx
-	pushq_cfi_reg rax
-	pushq_cfi_reg r8
-	pushq_cfi_reg r9
-	pushq_cfi_reg r10
-	pushq_cfi_reg r11
+	pushq %rdi
+	pushq %rsi
+	pushq %rdx
+	pushq %rcx
+	pushq %rax
+	pushq %r8
+	pushq %r9
+	pushq %r10
+	pushq %r11
 
 	.if \put_ret_addr_in_rdi
 	/* 9*8(%rsp) is return addr on stack */
-	movq_cfi_restore 9*8, rdi
+	movq 9*8(%rsp), %rdi
 	.endif
 
 	call \func
 	jmp  restore
-	CFI_ENDPROC
 	_ASM_NOKPROBE(\name)
 	.endm
 
@@ -57,19 +54,16 @@
 #if defined(CONFIG_TRACE_IRQFLAGS) \
  || defined(CONFIG_DEBUG_LOCK_ALLOC) \
  || defined(CONFIG_PREEMPT)
-	CFI_STARTPROC
-	CFI_ADJUST_CFA_OFFSET 9*8
 restore:
-	popq_cfi_reg r11
-	popq_cfi_reg r10
-	popq_cfi_reg r9
-	popq_cfi_reg r8
-	popq_cfi_reg rax
-	popq_cfi_reg rcx
-	popq_cfi_reg rdx
-	popq_cfi_reg rsi
-	popq_cfi_reg rdi
+	popq %r11
+	popq %r10
+	popq %r9
+	popq %r8
+	popq %rax
+	popq %rcx
+	popq %rdx
+	popq %rsi
+	popq %rdi
 	ret
-	CFI_ENDPROC
 	_ASM_NOKPROBE(restore)
 #endif

arch/x86/entry/vsyscall/Makefile

+#
+# Makefile for the x86 low level vsyscall code
+#
+obj-y					:= vsyscall_gtod.o
+
+obj-$(CONFIG_X86_VSYSCALL_EMULATION)	+= vsyscall_64.o vsyscall_emu_64.o
+

arch/x86/kernel/vsyscall_trace.h → arch/x86/entry/vsyscall/vsyscall_trace.h

@@ -24,6 +24,6 @@ TRACE_EVENT(emulate_vsyscall,
 #endif
 
 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH ../../arch/x86/kernel
+#define TRACE_INCLUDE_PATH ../../arch/x86/entry/vsyscall/
 #define TRACE_INCLUDE_FILE vsyscall_trace
 #include <trace/define_trace.h>

arch/x86/ia32/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
+obj-$(CONFIG_IA32_EMULATION) := sys_ia32.o ia32_signal.o
 
 obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 

arch/x86/include/asm/dwarf2.h

-#ifndef _ASM_X86_DWARF2_H
-#define _ASM_X86_DWARF2_H
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
- * Macros for dwarf2 CFI unwind table entries.
- * See "as.info" for details on these pseudo ops. Unfortunately
- * they are only supported in very new binutils, so define them
- * away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
-#define CFI_STARTPROC		.cfi_startproc
-#define CFI_ENDPROC		.cfi_endproc
-#define CFI_DEF_CFA		.cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET	.cfi_adjust_cfa_offset
-#define CFI_OFFSET		.cfi_offset
-#define CFI_REL_OFFSET		.cfi_rel_offset
-#define CFI_REGISTER		.cfi_register
-#define CFI_RESTORE		.cfi_restore
-#define CFI_REMEMBER_STATE	.cfi_remember_state
-#define CFI_RESTORE_STATE	.cfi_restore_state
-#define CFI_UNDEFINED		.cfi_undefined
-#define CFI_ESCAPE		.cfi_escape
-
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME	.cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
-	/*
-	 * Emit CFI data in .debug_frame sections, not .eh_frame sections.
-	 * The latter we currently just discard since we don't do DWARF
-	 * unwinding at runtime.  So only the offline DWARF information is
-	 * useful to anyone.  Note we should not use this directive if this
-	 * file is used in the vDSO assembly, or if vmlinux.lds.S gets
-	 * changed so it doesn't discard .eh_frame.
-	 */
-	.cfi_sections .debug_frame
-#endif
-
-#else
-
-/*
- * Due to the structure of pre-exisiting code, don't use assembler line
- * comment character # to ignore the arguments. Instead, use a dummy macro.
- */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC		cfi_ignore
-#define CFI_ENDPROC		cfi_ignore
-#define CFI_DEF_CFA		cfi_ignore
-#define CFI_DEF_CFA_REGISTER	cfi_ignore
-#define CFI_DEF_CFA_OFFSET	cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET		cfi_ignore
-#define CFI_REL_OFFSET		cfi_ignore
-#define CFI_REGISTER		cfi_ignore
-#define CFI_RESTORE		cfi_ignore
-#define CFI_REMEMBER_STATE	cfi_ignore
-#define CFI_RESTORE_STATE	cfi_ignore
-#define CFI_UNDEFINED		cfi_ignore
-#define CFI_ESCAPE		cfi_ignore
-#define CFI_SIGNAL_FRAME	cfi_ignore
-
-#endif
-
-/*
- * An attempt to make CFI annotations more or less
- * correct and shorter. It is implied that you know
- * what you're doing if you use them.
- */
-#ifdef __ASSEMBLY__
-#ifdef CONFIG_X86_64
-	.macro pushq_cfi reg
-	pushq \reg
-	CFI_ADJUST_CFA_OFFSET 8
-	.endm
-
-	.macro pushq_cfi_reg reg
-	pushq %\reg
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET \reg, 0
-	.endm
-
-	.macro popq_cfi reg
-	popq \reg
-	CFI_ADJUST_CFA_OFFSET -8
-	.endm
-
-	.macro popq_cfi_reg reg
-	popq %\reg
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE \reg
-	.endm
-
-	.macro pushfq_cfi
-	pushfq
-	CFI_ADJUST_CFA_OFFSET 8
-	.endm
-
-	.macro popfq_cfi
-	popfq
-	CFI_ADJUST_CFA_OFFSET -8
-	.endm
-
-	.macro movq_cfi reg offset=0
-	movq %\reg, \offset(%rsp)
-	CFI_REL_OFFSET \reg, \offset
-	.endm
-
-	.macro movq_cfi_restore offset reg
-	movq \offset(%rsp), %\reg
-	CFI_RESTORE \reg
-	.endm
-#else /*!CONFIG_X86_64*/
-	.macro pushl_cfi reg
-	pushl \reg
-	CFI_ADJUST_CFA_OFFSET 4
-	.endm
-
-	.macro pushl_cfi_reg reg
-	pushl %\reg
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET \reg, 0
-	.endm
-
-	.macro popl_cfi reg
-	popl \reg
-	CFI_ADJUST_CFA_OFFSET -4
-	.endm
-
-	.macro popl_cfi_reg reg
-	popl %\reg
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE \reg
-	.endm
-
-	.macro pushfl_cfi
-	pushfl
-	CFI_ADJUST_CFA_OFFSET 4
-	.endm
-
-	.macro popfl_cfi
-	popfl
-	CFI_ADJUST_CFA_OFFSET -4
-	.endm
-
-	.macro movl_cfi reg offset=0
-	movl %\reg, \offset(%esp)
-	CFI_REL_OFFSET \reg, \offset
-	.endm
-
-	.macro movl_cfi_restore offset reg
-	movl \offset(%esp), %\reg
-	CFI_RESTORE \reg
-	.endm
-#endif /*!CONFIG_X86_64*/
-#endif /*__ASSEMBLY__*/
-
-#endif /* _ASM_X86_DWARF2_H */

arch/x86/include/asm/frame.h

 #ifdef __ASSEMBLY__
 
 #include <asm/asm.h>
-#include <asm/dwarf2.h>
 
 /* The annotation hides the frame from the unwinder and makes it look
    like a ordinary ebp save/restore. This avoids some special cases for
    frame pointer later */
 #ifdef CONFIG_FRAME_POINTER
 	.macro FRAME
-	__ASM_SIZE(push,_cfi)	%__ASM_REG(bp)
-	CFI_REL_OFFSET		__ASM_REG(bp), 0
+	__ASM_SIZE(push,)	%__ASM_REG(bp)
 	__ASM_SIZE(mov)		%__ASM_REG(sp), %__ASM_REG(bp)
 	.endm
 	.macro ENDFRAME
-	__ASM_SIZE(pop,_cfi)	%__ASM_REG(bp)
-	CFI_RESTORE		__ASM_REG(bp)
+	__ASM_SIZE(pop,)	%__ASM_REG(bp)
 	.endm
 #else
 	.macro FRAME

arch/x86/include/asm/msr.h

@@ -206,8 +206,13 @@ do {                                                            \
 
 #endif	/* !CONFIG_PARAVIRT */
 
-#define wrmsrl_safe(msr, val) wrmsr_safe((msr), (u32)(val),		\
-					     (u32)((val) >> 32))
+/*
+ * 64-bit version of wrmsr_safe():
+ */
+static inline int wrmsrl_safe(u32 msr, u64 val)
+{
+	return wrmsr_safe(msr, (u32)val,  (u32)(val >> 32));
+}
 
 #define write_tsc(low, high) wrmsr(MSR_IA32_TSC, (low), (high))
 

arch/x86/include/asm/proto.h

@@ -5,12 +5,14 @@
 
 /* misc architecture specific prototypes */
 
-void system_call(void);
 void syscall_init(void);
 
-void ia32_syscall(void);
-void ia32_cstar_target(void);
-void ia32_sysenter_target(void);
+void entry_SYSCALL_64(void);
+void entry_SYSCALL_compat(void);
+void entry_INT80_32(void);
+void entry_INT80_compat(void);
+void entry_SYSENTER_32(void);
+void entry_SYSENTER_compat(void);
 
 void x86_configure_nx(void);
 void x86_report_nx(void);

arch/x86/include/asm/segment.h

@@ -231,11 +231,21 @@
 #define TLS_SIZE			(GDT_ENTRY_TLS_ENTRIES* 8)
 
 #ifdef __KERNEL__
+
+/*
+ * early_idt_handler_array is an array of entry points referenced in the
+ * early IDT.  For simplicity, it's a real array with one entry point
+ * every nine bytes.  That leaves room for an optional 'push $0' if the
+ * vector has no error code (two bytes), a 'push $vector_number' (two
+ * bytes), and a jump to the common entry code (up to five bytes).
+ */
+#define EARLY_IDT_HANDLER_SIZE 9
+
 #ifndef __ASSEMBLY__
 
-extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][2+2+5];
+extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
 #ifdef CONFIG_TRACING
-# define trace_early_idt_handlers early_idt_handlers
+# define trace_early_idt_handler_array early_idt_handler_array
 #endif
 
 /*

arch/x86/kernel/Makefile

@@ -22,7 +22,7 @@ KASAN_SANITIZE_dumpstack_$(BITS).o := n
 
 CFLAGS_irq.o := -I$(src)/../include/asm/trace
 
-obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
+obj-y			:= process_$(BITS).o signal.o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time.o ioport.o ldt.o dumpstack.o nmi.o
 obj-y			+= setup.o x86_init.o i8259.o irqinit.o jump_label.o
@@ -31,9 +31,6 @@ obj-y			+= probe_roms.o
 obj-$(CONFIG_X86_32)	+= i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= mcount_64.o
-obj-y			+= syscall_$(BITS).o vsyscall_gtod.o
-obj-$(CONFIG_IA32_EMULATION)	+= syscall_32.o
-obj-$(CONFIG_X86_VSYSCALL_EMULATION)	+= vsyscall_64.o vsyscall_emu_64.o
 obj-$(CONFIG_X86_ESPFIX64)	+= espfix_64.o
 obj-$(CONFIG_SYSFS)	+= ksysfs.o
 obj-y			+= bootflag.o e820.o

arch/x86/kernel/asm-offsets_64.c

@@ -66,7 +66,7 @@ int main(void)
 	DEFINE(__NR_syscall_max, sizeof(syscalls_64) - 1);
 	DEFINE(NR_syscalls, sizeof(syscalls_64));
 
-	DEFINE(__NR_ia32_syscall_max, sizeof(syscalls_ia32) - 1);
+	DEFINE(__NR_entry_INT80_compat_max, sizeof(syscalls_ia32) - 1);
 	DEFINE(IA32_NR_syscalls, sizeof(syscalls_ia32));
 
 	return 0;

arch/x86/kernel/cpu/common.c

@@ -1026,7 +1026,7 @@ void enable_sep_cpu(void)
 	      (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
 	      0);
 
-	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)ia32_sysenter_target, 0);
+	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
 
 out:
 	put_cpu();
@@ -1204,10 +1204,10 @@ void syscall_init(void)
 	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
 	 */
 	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
-	wrmsrl(MSR_LSTAR, system_call);
+	wrmsrl(MSR_LSTAR, entry_SYSCALL_64);
 
 #ifdef CONFIG_IA32_EMULATION
-	wrmsrl(MSR_CSTAR, ia32_cstar_target);
+	wrmsrl(MSR_CSTAR, entry_SYSCALL_compat);
 	/*
 	 * This only works on Intel CPUs.
 	 * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
@@ -1216,7 +1216,7 @@ void syscall_init(void)
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
 	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
-	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
+	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
 	wrmsrl(MSR_CSTAR, ignore_sysret);
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);

arch/x86/kernel/head64.c

@@ -167,7 +167,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data)
 	clear_bss();
 
 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
-		set_intr_gate(i, early_idt_handlers[i]);
+		set_intr_gate(i, early_idt_handler_array[i]);
 	load_idt((const struct desc_ptr *)&idt_descr);
 
 	copy_bootdata(__va(real_mode_data));

arch/x86/kernel/head_32.S

@@ -478,21 +478,22 @@ is486:
 __INIT
 setup_once:
 	/*
-	 * Set up a idt with 256 entries pointing to ignore_int,
-	 * interrupt gates. It doesn't actually load idt - that needs
-	 * to be done on each CPU. Interrupts are enabled elsewhere,
-	 * when we can be relatively sure everything is ok.
+	 * Set up a idt with 256 interrupt gates that push zero if there
+	 * is no error code and then jump to early_idt_handler_common.
+	 * It doesn't actually load the idt - that needs to be done on
+	 * each CPU. Interrupts are enabled elsewhere, when we can be
+	 * relatively sure everything is ok.
 	 */
 
 	movl $idt_table,%edi
-	movl $early_idt_handlers,%eax
+	movl $early_idt_handler_array,%eax
 	movl $NUM_EXCEPTION_VECTORS,%ecx
 1:
 	movl %eax,(%edi)
 	movl %eax,4(%edi)
 	/* interrupt gate, dpl=0, present */
 	movl $(0x8E000000 + __KERNEL_CS),2(%edi)
-	addl $9,%eax
+	addl $EARLY_IDT_HANDLER_SIZE,%eax
 	addl $8,%edi
 	loop 1b
 
@@ -524,26 +525,28 @@ setup_once:
 	andl $0,setup_once_ref	/* Once is enough, thanks */
 	ret
 
-ENTRY(early_idt_handlers)
+ENTRY(early_idt_handler_array)
 	# 36(%esp) %eflags
 	# 32(%esp) %cs
 	# 28(%esp) %eip
 	# 24(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
-	ASM_NOP2
-	.else
+	.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
 	pushl $0		# Dummy error code, to make stack frame uniform
 	.endif
 	pushl $i		# 20(%esp) Vector number
-	jmp early_idt_handler
+	jmp early_idt_handler_common
 	i = i + 1
+	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
-ENDPROC(early_idt_handlers)
+ENDPROC(early_idt_handler_array)
 	
-	/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+	/*
+	 * The stack is the hardware frame, an error code or zero, and the
+	 * vector number.
+	 */
 	cld
 
 	cmpl $2,(%esp)		# X86_TRAP_NMI
@@ -603,7 +606,7 @@ ex_entry:
 .Lis_nmi:
 	addl $8,%esp		/* drop vector number and error code */
 	iret
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
 
 /* This is the default interrupt "handler" :-) */
 	ALIGN

arch/x86/kernel/head_64.S

@@ -321,26 +321,28 @@ bad_address:
 	jmp bad_address
 
 	__INIT
-	.globl early_idt_handlers
-early_idt_handlers:
+ENTRY(early_idt_handler_array)
 	# 104(%rsp) %rflags
 	#  96(%rsp) %cs
 	#  88(%rsp) %rip
 	#  80(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
-	ASM_NOP2
-	.else
+	.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
 	pushq $0		# Dummy error code, to make stack frame uniform
 	.endif
 	pushq $i		# 72(%rsp) Vector number
-	jmp early_idt_handler
+	jmp early_idt_handler_common
 	i = i + 1
+	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
+ENDPROC(early_idt_handler_array)
 
-/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+	/*
+	 * The stack is the hardware frame, an error code or zero, and the
+	 * vector number.
+	 */
 	cld
 
 	cmpl $2,(%rsp)		# X86_TRAP_NMI
@@ -412,7 +414,7 @@ ENTRY(early_idt_handler)
 .Lis_nmi:
 	addq $16,%rsp		# drop vector number and error code
 	INTERRUPT_RETURN
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
 
 	__INITDATA
 

arch/x86/kernel/traps.c

@@ -72,8 +72,7 @@ gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss;
 #else
 #include <asm/processor-flags.h>
 #include <asm/setup.h>
-
-asmlinkage int system_call(void);
+#include <asm/proto.h>
 #endif
 
 /* Must be page-aligned because the real IDT is used in a fixmap. */
@@ -980,12 +979,12 @@ void __init trap_init(void)
 		set_bit(i, used_vectors);
 
 #ifdef CONFIG_IA32_EMULATION
-	set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
+	set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_compat);
 	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 
 #ifdef CONFIG_X86_32
-	set_system_trap_gate(IA32_SYSCALL_VECTOR, &system_call);
+	set_system_trap_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
 	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 

arch/x86/lib/Makefile

@@ -17,7 +17,6 @@ clean-files := inat-tables.c
 obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
 
 lib-y := delay.o misc.o cmdline.o
-lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o

arch/x86/lib/atomic64_386_32.S

@@ -11,26 +11,23 @@
 
 #include <linux/linkage.h>
 #include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
 
 /* if you want SMP support, implement these with real spinlocks */
 .macro LOCK reg
-	pushfl_cfi
+	pushfl
 	cli
 .endm
 
 .macro UNLOCK reg
-	popfl_cfi
+	popfl
 .endm
 
 #define BEGIN(op) \
 .macro endp; \
-	CFI_ENDPROC; \
 ENDPROC(atomic64_##op##_386); \
 .purgem endp; \
 .endm; \
 ENTRY(atomic64_##op##_386); \
-	CFI_STARTPROC; \
 	LOCK v;
 
 #define ENDP endp

arch/x86/lib/atomic64_cx8_32.S

@@ -11,7 +11,6 @@
 
 #include <linux/linkage.h>
 #include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
 
 .macro read64 reg
 	movl %ebx, %eax
@@ -22,16 +21,11 @@
 .endm
 
 ENTRY(atomic64_read_cx8)
-	CFI_STARTPROC
-
 	read64 %ecx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_read_cx8)
 
 ENTRY(atomic64_set_cx8)
-	CFI_STARTPROC
-
 1:
 /* we don't need LOCK_PREFIX since aligned 64-bit writes
  * are atomic on 586 and newer */
@@ -39,28 +33,23 @@ ENTRY(atomic64_set_cx8)
 	jne 1b
 
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_set_cx8)
 
 ENTRY(atomic64_xchg_cx8)
-	CFI_STARTPROC
-
 1:
 	LOCK_PREFIX
 	cmpxchg8b (%esi)
 	jne 1b
 
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_xchg_cx8)
 
 .macro addsub_return func ins insc
 ENTRY(atomic64_\func\()_return_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebp
-	pushl_cfi_reg ebx
-	pushl_cfi_reg esi
-	pushl_cfi_reg edi
+	pushl %ebp
+	pushl %ebx
+	pushl %esi
+	pushl %edi
 
 	movl %eax, %esi
 	movl %edx, %edi
@@ -79,12 +68,11 @@ ENTRY(atomic64_\func\()_return_cx8)
 10:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	popl_cfi_reg edi
-	popl_cfi_reg esi
-	popl_cfi_reg ebx
-	popl_cfi_reg ebp
+	popl %edi
+	popl %esi
+	popl %ebx
+	popl %ebp
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_\func\()_return_cx8)
 .endm
 
@@ -93,8 +81,7 @@ addsub_return sub sub sbb
 
 .macro incdec_return func ins insc
 ENTRY(atomic64_\func\()_return_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
+	pushl %ebx
 
 	read64 %esi
 1:
@@ -109,9 +96,8 @@ ENTRY(atomic64_\func\()_return_cx8)
 10:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	popl_cfi_reg ebx
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_\func\()_return_cx8)
 .endm
 
@@ -119,8 +105,7 @@ incdec_return inc add adc
 incdec_return dec sub sbb
 
 ENTRY(atomic64_dec_if_positive_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
+	pushl %ebx
 
 	read64 %esi
 1:
@@ -136,18 +121,16 @@ ENTRY(atomic64_dec_if_positive_cx8)
 2:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	popl_cfi_reg ebx
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_dec_if_positive_cx8)
 
 ENTRY(atomic64_add_unless_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebp
-	pushl_cfi_reg ebx
+	pushl %ebp
+	pushl %ebx
 /* these just push these two parameters on the stack */
-	pushl_cfi_reg edi
-	pushl_cfi_reg ecx
+	pushl %edi
+	pushl %ecx
 
 	movl %eax, %ebp
 	movl %edx, %edi
@@ -168,21 +151,18 @@ ENTRY(atomic64_add_unless_cx8)
 	movl $1, %eax
 3:
 	addl $8, %esp
-	CFI_ADJUST_CFA_OFFSET -8
-	popl_cfi_reg ebx
-	popl_cfi_reg ebp
+	popl %ebx
+	popl %ebp
 	ret
 4:
 	cmpl %edx, 4(%esp)
 	jne 2b
 	xorl %eax, %eax
 	jmp 3b
-	CFI_ENDPROC
 ENDPROC(atomic64_add_unless_cx8)
 
 ENTRY(atomic64_inc_not_zero_cx8)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
+	pushl %ebx
 
 	read64 %esi
 1:
@@ -199,7 +179,6 @@ ENTRY(atomic64_inc_not_zero_cx8)
 
 	movl $1, %eax
 3:
-	popl_cfi_reg ebx
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(atomic64_inc_not_zero_cx8)

arch/x86/lib/checksum_32.S

@@ -26,7 +26,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/errno.h>
 #include <asm/asm.h>
 				
@@ -50,9 +49,8 @@ unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
 	   * alignment for the unrolled loop.
 	   */		
 ENTRY(csum_partial)
-	CFI_STARTPROC
-	pushl_cfi_reg esi
-	pushl_cfi_reg ebx
+	pushl %esi
+	pushl %ebx
 	movl 20(%esp),%eax	# Function arg: unsigned int sum
 	movl 16(%esp),%ecx	# Function arg: int len
 	movl 12(%esp),%esi	# Function arg: unsigned char *buff
@@ -129,10 +127,9 @@ ENTRY(csum_partial)
 	jz 8f
 	roll $8, %eax
 8:
-	popl_cfi_reg ebx
-	popl_cfi_reg esi
+	popl %ebx
+	popl %esi
 	ret
-	CFI_ENDPROC
 ENDPROC(csum_partial)
 
 #else
@@ -140,9 +137,8 @@ ENDPROC(csum_partial)
 /* Version for PentiumII/PPro */
 
 ENTRY(csum_partial)
-	CFI_STARTPROC
-	pushl_cfi_reg esi
-	pushl_cfi_reg ebx
+	pushl %esi
+	pushl %ebx
 	movl 20(%esp),%eax	# Function arg: unsigned int sum
 	movl 16(%esp),%ecx	# Function arg: int len
 	movl 12(%esp),%esi	# Function arg:	const unsigned char *buf
@@ -249,10 +245,9 @@ ENTRY(csum_partial)
 	jz 90f
 	roll $8, %eax
 90: 
-	popl_cfi_reg ebx
-	popl_cfi_reg esi
+	popl %ebx
+	popl %esi
 	ret
-	CFI_ENDPROC
 ENDPROC(csum_partial)
 				
 #endif
@@ -287,12 +282,10 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
 #define FP		12
 		
 ENTRY(csum_partial_copy_generic)
-	CFI_STARTPROC
 	subl  $4,%esp	
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
-	pushl_cfi_reg ebx
+	pushl %edi
+	pushl %esi
+	pushl %ebx
 	movl ARGBASE+16(%esp),%eax	# sum
 	movl ARGBASE+12(%esp),%ecx	# len
 	movl ARGBASE+4(%esp),%esi	# src
@@ -401,12 +394,11 @@ DST(	movb %cl, (%edi)	)
 
 .previous
 
-	popl_cfi_reg ebx
-	popl_cfi_reg esi
-	popl_cfi_reg edi
-	popl_cfi %ecx			# equivalent to addl $4,%esp
+	popl %ebx
+	popl %esi
+	popl %edi
+	popl %ecx			# equivalent to addl $4,%esp
 	ret	
-	CFI_ENDPROC
 ENDPROC(csum_partial_copy_generic)
 
 #else
@@ -426,10 +418,9 @@ ENDPROC(csum_partial_copy_generic)
 #define ARGBASE 12
 		
 ENTRY(csum_partial_copy_generic)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
+	pushl %ebx
+	pushl %edi
+	pushl %esi
 	movl ARGBASE+4(%esp),%esi	#src
 	movl ARGBASE+8(%esp),%edi	#dst	
 	movl ARGBASE+12(%esp),%ecx	#len
@@ -489,11 +480,10 @@ DST(	movb %dl, (%edi)         )
 	jmp  7b			
 .previous				
 
-	popl_cfi_reg esi
-	popl_cfi_reg edi
-	popl_cfi_reg ebx
+	popl %esi
+	popl %edi
+	popl %ebx
 	ret
-	CFI_ENDPROC
 ENDPROC(csum_partial_copy_generic)
 				
 #undef ROUND

arch/x86/lib/clear_page_64.S

 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -15,7 +14,6 @@
  * %rdi	- page
  */
 ENTRY(clear_page)
-	CFI_STARTPROC
 
 	ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp clear_page_c_e", X86_FEATURE_ERMS
@@ -24,11 +22,9 @@ ENTRY(clear_page)
 	xorl %eax,%eax
 	rep stosq
 	ret
-	CFI_ENDPROC
 ENDPROC(clear_page)
 
 ENTRY(clear_page_orig)
-	CFI_STARTPROC
 
 	xorl   %eax,%eax
 	movl   $4096/64,%ecx
@@ -48,14 +44,11 @@ ENTRY(clear_page_orig)
 	jnz	.Lloop
 	nop
 	ret
-	CFI_ENDPROC
 ENDPROC(clear_page_orig)
 
 ENTRY(clear_page_c_e)
-	CFI_STARTPROC
 	movl $4096,%ecx
 	xorl %eax,%eax
 	rep stosb
 	ret
-	CFI_ENDPROC
 ENDPROC(clear_page_c_e)

arch/x86/lib/cmpxchg16b_emu.S

@@ -6,7 +6,6 @@
  *
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/percpu.h>
 
 .text
@@ -21,7 +20,6 @@
  * %al  : Operation successful
  */
 ENTRY(this_cpu_cmpxchg16b_emu)
-CFI_STARTPROC
 
 #
 # Emulate 'cmpxchg16b %gs:(%rsi)' except we return the result in %al not
@@ -32,7 +30,7 @@ CFI_STARTPROC
 # *atomic* on a single cpu (as provided by the this_cpu_xx class of
 # macros).
 #
-	pushfq_cfi
+	pushfq
 	cli
 
 	cmpq PER_CPU_VAR((%rsi)), %rax
@@ -43,17 +41,13 @@ CFI_STARTPROC
 	movq %rbx, PER_CPU_VAR((%rsi))
 	movq %rcx, PER_CPU_VAR(8(%rsi))
 
-	CFI_REMEMBER_STATE
-	popfq_cfi
+	popfq
 	mov $1, %al
 	ret
 
-	CFI_RESTORE_STATE
 .Lnot_same:
-	popfq_cfi
+	popfq
 	xor %al,%al
 	ret
 
-CFI_ENDPROC
-
 ENDPROC(this_cpu_cmpxchg16b_emu)

arch/x86/lib/cmpxchg8b_emu.S

@@ -7,7 +7,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 
 .text
 
@@ -20,14 +19,13 @@
  * %ecx : high 32 bits of new value
  */
 ENTRY(cmpxchg8b_emu)
-CFI_STARTPROC
 
 #
 # Emulate 'cmpxchg8b (%esi)' on UP except we don't
 # set the whole ZF thing (caller will just compare
 # eax:edx with the expected value)
 #
-	pushfl_cfi
+	pushfl
 	cli
 
 	cmpl  (%esi), %eax
@@ -38,18 +36,15 @@ CFI_STARTPROC
 	movl %ebx,  (%esi)
 	movl %ecx, 4(%esi)
 
-	CFI_REMEMBER_STATE
-	popfl_cfi
+	popfl
 	ret
 
-	CFI_RESTORE_STATE
 .Lnot_same:
 	movl  (%esi), %eax
 .Lhalf_same:
 	movl 4(%esi), %edx
 
-	popfl_cfi
+	popfl
 	ret
 
-CFI_ENDPROC
 ENDPROC(cmpxchg8b_emu)

arch/x86/lib/copy_page_64.S

 /* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -13,22 +12,16 @@
  */
 	ALIGN
 ENTRY(copy_page)
-	CFI_STARTPROC
 	ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD
 	movl	$4096/8, %ecx
 	rep	movsq
 	ret
-	CFI_ENDPROC
 ENDPROC(copy_page)
 
 ENTRY(copy_page_regs)
-	CFI_STARTPROC
 	subq	$2*8,	%rsp
-	CFI_ADJUST_CFA_OFFSET 2*8
 	movq	%rbx,	(%rsp)
-	CFI_REL_OFFSET rbx, 0
 	movq	%r12,	1*8(%rsp)
-	CFI_REL_OFFSET r12, 1*8
 
 	movl	$(4096/64)-5,	%ecx
 	.p2align 4
@@ -87,11 +80,7 @@ ENTRY(copy_page_regs)
 	jnz	.Loop2
 
 	movq	(%rsp), %rbx
-	CFI_RESTORE rbx
 	movq	1*8(%rsp), %r12
-	CFI_RESTORE r12
 	addq	$2*8, %rsp
-	CFI_ADJUST_CFA_OFFSET -2*8
 	ret
-	CFI_ENDPROC
 ENDPROC(copy_page_regs)

arch/x86/lib/copy_user_64.S

@@ -7,7 +7,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/current.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
@@ -18,7 +17,6 @@
 
 /* Standard copy_to_user with segment limit checking */
 ENTRY(_copy_to_user)
-	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rdi,%rcx
 	addq %rdx,%rcx
@@ -30,12 +28,10 @@ ENTRY(_copy_to_user)
 		      X86_FEATURE_REP_GOOD,			\
 		      "jmp copy_user_enhanced_fast_string",	\
 		      X86_FEATURE_ERMS
-	CFI_ENDPROC
 ENDPROC(_copy_to_user)
 
 /* Standard copy_from_user with segment limit checking */
 ENTRY(_copy_from_user)
-	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rsi,%rcx
 	addq %rdx,%rcx
@@ -47,14 +43,12 @@ ENTRY(_copy_from_user)
 		      X86_FEATURE_REP_GOOD,			\
 		      "jmp copy_user_enhanced_fast_string",	\
 		      X86_FEATURE_ERMS
-	CFI_ENDPROC
 ENDPROC(_copy_from_user)
 
 	.section .fixup,"ax"
 	/* must zero dest */
 ENTRY(bad_from_user)
 bad_from_user:
-	CFI_STARTPROC
 	movl %edx,%ecx
 	xorl %eax,%eax
 	rep
@@ -62,7 +56,6 @@ bad_from_user:
 bad_to_user:
 	movl %edx,%eax
 	ret
-	CFI_ENDPROC
 ENDPROC(bad_from_user)
 	.previous
 
@@ -80,7 +73,6 @@ ENDPROC(bad_from_user)
  * eax uncopied bytes or 0 if successful.
  */
 ENTRY(copy_user_generic_unrolled)
-	CFI_STARTPROC
 	ASM_STAC
 	cmpl $8,%edx
 	jb 20f		/* less then 8 bytes, go to byte copy loop */
@@ -162,7 +154,6 @@ ENTRY(copy_user_generic_unrolled)
 	_ASM_EXTABLE(19b,40b)
 	_ASM_EXTABLE(21b,50b)
 	_ASM_EXTABLE(22b,50b)
-	CFI_ENDPROC
 ENDPROC(copy_user_generic_unrolled)
 
 /* Some CPUs run faster using the string copy instructions.
@@ -184,7 +175,6 @@ ENDPROC(copy_user_generic_unrolled)
  * eax uncopied bytes or 0 if successful.
  */
 ENTRY(copy_user_generic_string)
-	CFI_STARTPROC
 	ASM_STAC
 	cmpl $8,%edx
 	jb 2f		/* less than 8 bytes, go to byte copy loop */
@@ -209,7 +199,6 @@ ENTRY(copy_user_generic_string)
 
 	_ASM_EXTABLE(1b,11b)
 	_ASM_EXTABLE(3b,12b)
-	CFI_ENDPROC
 ENDPROC(copy_user_generic_string)
 
 /*
@@ -225,7 +214,6 @@ ENDPROC(copy_user_generic_string)
  * eax uncopied bytes or 0 if successful.
  */
 ENTRY(copy_user_enhanced_fast_string)
-	CFI_STARTPROC
 	ASM_STAC
 	movl %edx,%ecx
 1:	rep
@@ -240,7 +228,6 @@ ENTRY(copy_user_enhanced_fast_string)
 	.previous
 
 	_ASM_EXTABLE(1b,12b)
-	CFI_ENDPROC
 ENDPROC(copy_user_enhanced_fast_string)
 
 /*
@@ -248,7 +235,6 @@ ENDPROC(copy_user_enhanced_fast_string)
  * This will force destination/source out of cache for more performance.
  */
 ENTRY(__copy_user_nocache)
-	CFI_STARTPROC
 	ASM_STAC
 	cmpl $8,%edx
 	jb 20f		/* less then 8 bytes, go to byte copy loop */
@@ -332,5 +318,4 @@ ENTRY(__copy_user_nocache)
 	_ASM_EXTABLE(19b,40b)
 	_ASM_EXTABLE(21b,50b)
 	_ASM_EXTABLE(22b,50b)
-	CFI_ENDPROC
 ENDPROC(__copy_user_nocache)

arch/x86/lib/csum-copy_64.S

@@ -6,7 +6,6 @@
  * for more details. No warranty for anything given at all.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/errno.h>
 #include <asm/asm.h>
 
@@ -47,23 +46,16 @@
 
 
 ENTRY(csum_partial_copy_generic)
-	CFI_STARTPROC
 	cmpl	$3*64, %edx
 	jle	.Lignore
 
 .Lignore:
 	subq  $7*8, %rsp
-	CFI_ADJUST_CFA_OFFSET 7*8
 	movq  %rbx, 2*8(%rsp)
-	CFI_REL_OFFSET rbx, 2*8
 	movq  %r12, 3*8(%rsp)
-	CFI_REL_OFFSET r12, 3*8
 	movq  %r14, 4*8(%rsp)
-	CFI_REL_OFFSET r14, 4*8
 	movq  %r13, 5*8(%rsp)
-	CFI_REL_OFFSET r13, 5*8
 	movq  %rbp, 6*8(%rsp)
-	CFI_REL_OFFSET rbp, 6*8
 
 	movq  %r8, (%rsp)
 	movq  %r9, 1*8(%rsp)
@@ -206,22 +198,14 @@ ENTRY(csum_partial_copy_generic)
 	addl %ebx, %eax
 	adcl %r9d, %eax		/* carry */
 
-	CFI_REMEMBER_STATE
 .Lende:
 	movq 2*8(%rsp), %rbx
-	CFI_RESTORE rbx
 	movq 3*8(%rsp), %r12
-	CFI_RESTORE r12
 	movq 4*8(%rsp), %r14
-	CFI_RESTORE r14
 	movq 5*8(%rsp), %r13
-	CFI_RESTORE r13
 	movq 6*8(%rsp), %rbp
-	CFI_RESTORE rbp
 	addq $7*8, %rsp
-	CFI_ADJUST_CFA_OFFSET -7*8
 	ret
-	CFI_RESTORE_STATE
 
 	/* Exception handlers. Very simple, zeroing is done in the wrappers */
 .Lbad_source:
@@ -237,5 +221,4 @@ ENTRY(csum_partial_copy_generic)
 	jz   .Lende
 	movl $-EFAULT, (%rax)
 	jmp .Lende
-	CFI_ENDPROC
 ENDPROC(csum_partial_copy_generic)

arch/x86/lib/getuser.S

@@ -26,7 +26,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/page_types.h>
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
@@ -36,7 +35,6 @@
 
 	.text
 ENTRY(__get_user_1)
-	CFI_STARTPROC
 	GET_THREAD_INFO(%_ASM_DX)
 	cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
 	jae bad_get_user
@@ -45,11 +43,9 @@ ENTRY(__get_user_1)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
-	CFI_STARTPROC
 	add $1,%_ASM_AX
 	jc bad_get_user
 	GET_THREAD_INFO(%_ASM_DX)
@@ -60,11 +56,9 @@ ENTRY(__get_user_2)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
-	CFI_STARTPROC
 	add $3,%_ASM_AX
 	jc bad_get_user
 	GET_THREAD_INFO(%_ASM_DX)
@@ -75,11 +69,9 @@ ENTRY(__get_user_4)
 	xor %eax,%eax
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 ENDPROC(__get_user_4)
 
 ENTRY(__get_user_8)
-	CFI_STARTPROC
 #ifdef CONFIG_X86_64
 	add $7,%_ASM_AX
 	jc bad_get_user
@@ -104,28 +96,23 @@ ENTRY(__get_user_8)
 	ASM_CLAC
 	ret
 #endif
-	CFI_ENDPROC
 ENDPROC(__get_user_8)
 
 
 bad_get_user:
-	CFI_STARTPROC
 	xor %edx,%edx
 	mov $(-EFAULT),%_ASM_AX
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 END(bad_get_user)
 
 #ifdef CONFIG_X86_32
 bad_get_user_8:
-	CFI_STARTPROC
 	xor %edx,%edx
 	xor %ecx,%ecx
 	mov $(-EFAULT),%_ASM_AX
 	ASM_CLAC
 	ret
-	CFI_ENDPROC
 END(bad_get_user_8)
 #endif
 

arch/x86/lib/iomap_copy_64.S

@@ -16,15 +16,12 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 
 /*
  * override generic version in lib/iomap_copy.c
  */
 ENTRY(__iowrite32_copy)
-	CFI_STARTPROC
 	movl %edx,%ecx
 	rep movsd
 	ret
-	CFI_ENDPROC
 ENDPROC(__iowrite32_copy)

arch/x86/lib/memcpy_64.S

@@ -2,7 +2,6 @@
 
 #include <linux/linkage.h>
 #include <asm/cpufeature.h>
-#include <asm/dwarf2.h>
 #include <asm/alternative-asm.h>
 
 /*
@@ -53,7 +52,6 @@ ENTRY(memcpy_erms)
 ENDPROC(memcpy_erms)
 
 ENTRY(memcpy_orig)
-	CFI_STARTPROC
 	movq %rdi, %rax
 
 	cmpq $0x20, %rdx
@@ -178,5 +176,4 @@ ENTRY(memcpy_orig)
 
 .Lend:
 	retq
-	CFI_ENDPROC
 ENDPROC(memcpy_orig)

arch/x86/lib/memmove_64.S

@@ -6,7 +6,6 @@
  *	- Copyright 2011 Fenghua Yu <fenghua.yu@intel.com>
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -27,7 +26,6 @@
 
 ENTRY(memmove)
 ENTRY(__memmove)
-	CFI_STARTPROC
 
 	/* Handle more 32 bytes in loop */
 	mov %rdi, %rax
@@ -207,6 +205,5 @@ ENTRY(__memmove)
 	movb %r11b, (%rdi)
 13:
 	retq
-	CFI_ENDPROC
 ENDPROC(__memmove)
 ENDPROC(memmove)

arch/x86/lib/memset_64.S

 /* Copyright 2002 Andi Kleen, SuSE Labs */
 
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
@@ -66,7 +65,6 @@ ENTRY(memset_erms)
 ENDPROC(memset_erms)
 
 ENTRY(memset_orig)
-	CFI_STARTPROC
 	movq %rdi,%r10
 
 	/* expand byte value  */
@@ -78,7 +76,6 @@ ENTRY(memset_orig)
 	movl  %edi,%r9d
 	andl  $7,%r9d
 	jnz  .Lbad_alignment
-	CFI_REMEMBER_STATE
 .Lafter_bad_alignment:
 
 	movq  %rdx,%rcx
@@ -128,7 +125,6 @@ ENTRY(memset_orig)
 	movq	%r10,%rax
 	ret
 
-	CFI_RESTORE_STATE
 .Lbad_alignment:
 	cmpq $7,%rdx
 	jbe	.Lhandle_7
@@ -139,5 +135,4 @@ ENTRY(memset_orig)
 	subq %r8,%rdx
 	jmp .Lafter_bad_alignment
 .Lfinal:
-	CFI_ENDPROC
 ENDPROC(memset_orig)

arch/x86/lib/msr-reg.S

 #include <linux/linkage.h>
 #include <linux/errno.h>
-#include <asm/dwarf2.h>
 #include <asm/asm.h>
 #include <asm/msr.h>
 
@@ -13,9 +12,8 @@
  */
 .macro op_safe_regs op
 ENTRY(\op\()_safe_regs)
-	CFI_STARTPROC
-	pushq_cfi_reg rbx
-	pushq_cfi_reg rbp
+	pushq %rbx
+	pushq %rbp
 	movq	%rdi, %r10	/* Save pointer */
 	xorl	%r11d, %r11d	/* Return value */
 	movl    (%rdi), %eax
@@ -25,7 +23,6 @@ ENTRY(\op\()_safe_regs)
 	movl    20(%rdi), %ebp
 	movl    24(%rdi), %esi
 	movl    28(%rdi), %edi
-	CFI_REMEMBER_STATE
 1:	\op
 2:	movl    %eax, (%r10)
 	movl	%r11d, %eax	/* Return value */
@@ -35,16 +32,14 @@ ENTRY(\op\()_safe_regs)
 	movl    %ebp, 20(%r10)
 	movl    %esi, 24(%r10)
 	movl    %edi, 28(%r10)
-	popq_cfi_reg rbp
-	popq_cfi_reg rbx
+	popq %rbp
+	popq %rbx
 	ret
 3:
-	CFI_RESTORE_STATE
 	movl    $-EIO, %r11d
 	jmp     2b
 
 	_ASM_EXTABLE(1b, 3b)
-	CFI_ENDPROC
 ENDPROC(\op\()_safe_regs)
 .endm
 
@@ -52,13 +47,12 @@ ENDPROC(\op\()_safe_regs)
 
 .macro op_safe_regs op
 ENTRY(\op\()_safe_regs)
-	CFI_STARTPROC
-	pushl_cfi_reg ebx
-	pushl_cfi_reg ebp
-	pushl_cfi_reg esi
-	pushl_cfi_reg edi
-	pushl_cfi $0              /* Return value */
-	pushl_cfi %eax
+	pushl %ebx
+	pushl %ebp
+	pushl %esi
+	pushl %edi
+	pushl $0              /* Return value */
+	pushl %eax
 	movl    4(%eax), %ecx
 	movl    8(%eax), %edx
 	movl    12(%eax), %ebx
@@ -66,32 +60,28 @@ ENTRY(\op\()_safe_regs)
 	movl    24(%eax), %esi
 	movl    28(%eax), %edi
 	movl    (%eax), %eax
-	CFI_REMEMBER_STATE
 1:	\op
-2:	pushl_cfi %eax
+2:	pushl %eax
 	movl    4(%esp), %eax
-	popl_cfi (%eax)
+	popl (%eax)
 	addl    $4, %esp
-	CFI_ADJUST_CFA_OFFSET -4
 	movl    %ecx, 4(%eax)
 	movl    %edx, 8(%eax)
 	movl    %ebx, 12(%eax)
 	movl    %ebp, 20(%eax)
 	movl    %esi, 24(%eax)
 	movl    %edi, 28(%eax)
-	popl_cfi %eax
-	popl_cfi_reg edi
-	popl_cfi_reg esi
-	popl_cfi_reg ebp
-	popl_cfi_reg ebx
+	popl %eax
+	popl %edi
+	popl %esi
+	popl %ebp
+	popl %ebx
 	ret
 3:
-	CFI_RESTORE_STATE
 	movl    $-EIO, 4(%esp)
 	jmp     2b
 
 	_ASM_EXTABLE(1b, 3b)
-	CFI_ENDPROC
 ENDPROC(\op\()_safe_regs)
 .endm
 

arch/x86/lib/putuser.S

@@ -11,7 +11,6 @@
  * return value.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 #include <asm/thread_info.h>
 #include <asm/errno.h>
 #include <asm/asm.h>
@@ -30,11 +29,9 @@
  * as they get called from within inline assembly.
  */
 
-#define ENTER	CFI_STARTPROC ; \
-		GET_THREAD_INFO(%_ASM_BX)
+#define ENTER	GET_THREAD_INFO(%_ASM_BX)
 #define EXIT	ASM_CLAC ;	\
-		ret ;		\
-		CFI_ENDPROC
+		ret
 
 .text
 ENTRY(__put_user_1)
@@ -87,7 +84,6 @@ ENTRY(__put_user_8)
 ENDPROC(__put_user_8)
 
 bad_put_user:
-	CFI_STARTPROC
 	movl $-EFAULT,%eax
 	EXIT
 END(bad_put_user)

arch/x86/lib/rwsem.S

@@ -15,7 +15,6 @@
 
 #include <linux/linkage.h>
 #include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
 
 #define __ASM_HALF_REG(reg)	__ASM_SEL(reg, e##reg)
 #define __ASM_HALF_SIZE(inst)	__ASM_SEL(inst##w, inst##l)
@@ -34,10 +33,10 @@
  */
 
 #define save_common_regs \
-	pushl_cfi_reg ecx
+	pushl %ecx
 
 #define restore_common_regs \
-	popl_cfi_reg ecx
+	popl %ecx
 
 	/* Avoid uglifying the argument copying x86-64 needs to do. */
 	.macro movq src, dst
@@ -64,50 +63,45 @@
  */
 
 #define save_common_regs \
-	pushq_cfi_reg rdi; \
-	pushq_cfi_reg rsi; \
-	pushq_cfi_reg rcx; \
-	pushq_cfi_reg r8;  \
-	pushq_cfi_reg r9;  \
-	pushq_cfi_reg r10; \
-	pushq_cfi_reg r11
+	pushq %rdi; \
+	pushq %rsi; \
+	pushq %rcx; \
+	pushq %r8;  \
+	pushq %r9;  \
+	pushq %r10; \
+	pushq %r11
 
 #define restore_common_regs \
-	popq_cfi_reg r11; \
-	popq_cfi_reg r10; \
-	popq_cfi_reg r9; \
-	popq_cfi_reg r8; \
-	popq_cfi_reg rcx; \
-	popq_cfi_reg rsi; \
-	popq_cfi_reg rdi
+	popq %r11; \
+	popq %r10; \
+	popq %r9; \
+	popq %r8; \
+	popq %rcx; \
+	popq %rsi; \
+	popq %rdi
 
 #endif
 
 /* Fix up special calling conventions */
 ENTRY(call_rwsem_down_read_failed)
-	CFI_STARTPROC
 	save_common_regs
-	__ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(push,) %__ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_down_read_failed
-	__ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(pop,) %__ASM_REG(dx)
 	restore_common_regs
 	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_down_read_failed)
 
 ENTRY(call_rwsem_down_write_failed)
-	CFI_STARTPROC
 	save_common_regs
 	movq %rax,%rdi
 	call rwsem_down_write_failed
 	restore_common_regs
 	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_down_write_failed)
 
 ENTRY(call_rwsem_wake)
-	CFI_STARTPROC
 	/* do nothing if still outstanding active readers */
 	__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
 	jnz 1f
@@ -116,17 +110,14 @@ ENTRY(call_rwsem_wake)
 	call rwsem_wake
 	restore_common_regs
 1:	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_wake)
 
 ENTRY(call_rwsem_downgrade_wake)
-	CFI_STARTPROC
 	save_common_regs
-	__ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(push,) %__ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_downgrade_wake
-	__ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
+	__ASM_SIZE(pop,) %__ASM_REG(dx)
 	restore_common_regs
 	ret
-	CFI_ENDPROC
 ENDPROC(call_rwsem_downgrade_wake)

arch/x86/net/bpf_jit.S

@@ -8,7 +8,6 @@
  * of the License.
  */
 #include <linux/linkage.h>
-#include <asm/dwarf2.h>
 
 /*
  * Calling convention :

arch/x86/um/Makefile

@@ -26,7 +26,7 @@ else
 
 obj-y += syscalls_64.o vdso/
 
-subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../lib/thunk_64.o \
+subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../entry/thunk_64.o \
 		../lib/rwsem.o
 
 endif

arch/x86/xen/xen-asm_64.S

@@ -114,7 +114,7 @@ RELOC(xen_sysret32, 1b+1)
 /* Normal 64-bit system call target */
 ENTRY(xen_syscall_target)
 	undo_xen_syscall
-	jmp system_call_after_swapgs
+	jmp entry_SYSCALL_64_after_swapgs
 ENDPROC(xen_syscall_target)
 
 #ifdef CONFIG_IA32_EMULATION
@@ -122,13 +122,13 @@ ENDPROC(xen_syscall_target)
 /* 32-bit compat syscall target */
 ENTRY(xen_syscall32_target)
 	undo_xen_syscall
-	jmp ia32_cstar_target
+	jmp entry_SYSCALL_compat
 ENDPROC(xen_syscall32_target)
 
 /* 32-bit compat sysenter target */
 ENTRY(xen_sysenter_target)
 	undo_xen_syscall
-	jmp ia32_sysenter_target
+	jmp entry_SYSENTER_compat
 ENDPROC(xen_sysenter_target)
 
 #else /* !CONFIG_IA32_EMULATION */

scripts/checksyscalls.sh

@@ -212,5 +212,5 @@ EOF
     )
 }
 
-(ignore_list && syscall_list $(dirname $0)/../arch/x86/syscalls/syscall_32.tbl) | \
+(ignore_list && syscall_list $(dirname $0)/../arch/x86/entry/syscalls/syscall_32.tbl) | \
 $* -E -x c - > /dev/null