usb: musb: dsps: use msecs_to_jiffies instead

when polling, we were using n * HZ (where n is
an integer in seconds), however HZ isn't always
correct if we're using cpufreq. A better way
is to use msecs_to_jiffies(n) (where n is now
an integer in miliseconds).

while at that, also rename poll_seconds to poll_timeout
and  change its type to unsigned int.
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/musb/musb_dsps.c

@@ -119,7 +119,7 @@ struct dsps_musb_wrapper {
 	unsigned	iddig:5;
 	unsigned	iddig_mux:5;
 	/* miscellaneous stuff */
-	u8		poll_seconds;
+	unsigned	poll_timeout;
 };
 
 /*
@@ -285,7 +285,8 @@ static void otg_timer(unsigned long _musb)
 		}
 		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
 			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
@@ -352,8 +353,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
-			mod_timer(&glue->timer,
-					jiffies + wrp->poll_seconds * HZ);
+			mod_timer(&glue->timer, jiffies +
+					msecs_to_jiffies(wrp->poll_timeout));
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
 			MUSB_HST_MODE(musb);
@@ -382,7 +383,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	/* Poll for ID change in OTG port mode */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -832,7 +834,7 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
 	.rxep_shift		= 16,
 	.rxep_mask		= 0xfffe,
 	.rxep_bitmap		= (0xfffe << 16),
-	.poll_seconds		= 2,
+	.poll_timeout		= 2000, /* ms */
 };
 
 static const struct of_device_id musb_dsps_of_match[] = {
@@ -888,7 +890,8 @@ static int dsps_resume(struct device *dev)
 	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 
 	return 0;
 }