Commit 9ef38eaf authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] HP ProLiant WatchDog driver
  [WATCHDOG] blackfin Watchdog driver: relocate all strings used in __init functions to __initdata
  [WATCHDOG] Convert mtx1 wdt to be a platform device and use generic GPIO API
  [WATCHDOG] Add support for SB1 hardware watchdog
parents cf91b824 7f4da474
...@@ -402,6 +402,18 @@ config IT8712F_WDT ...@@ -402,6 +402,18 @@ config IT8712F_WDT
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called it8712f_wdt. module will be called it8712f_wdt.
config HP_WATCHDOG
tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
depends on X86
help
A software monitoring watchdog and NMI sourcing driver. This driver
will detect lockups and provide stack trace. Also, when an NMI
occurs this driver will make the necessary BIOS calls to log
the cause of the NMI. This is a driver that will only load on a
HP ProLiant system with a minimum of iLO2 support.
To compile this driver as a module, choose M here: the
module will be called hpwdt.
config SC1200_WDT config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on X86 depends on X86
...@@ -633,6 +645,19 @@ config WDT_RM9K_GPI ...@@ -633,6 +645,19 @@ config WDT_RM9K_GPI
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called rm9k_wdt. module will be called rm9k_wdt.
config SIBYTE_WDOG
tristate "Sibyte SoC hardware watchdog"
depends on CPU_SB1
help
Watchdog driver for the built in watchdog hardware in Sibyte
SoC processors. There are apparently two watchdog timers
on such processors; this driver supports only the first one,
because currently Linux only supports exporting one watchdog
to userspace.
To compile this driver as a loadable module, choose M here.
The module will be called sb_wdog.
config AR7_WDT config AR7_WDT
tristate "TI AR7 Watchdog Timer" tristate "TI AR7 Watchdog Timer"
depends on AR7 depends on AR7
......
...@@ -67,6 +67,7 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o ...@@ -67,6 +67,7 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
...@@ -92,6 +93,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o ...@@ -92,6 +93,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
......
...@@ -29,6 +29,7 @@ ...@@ -29,6 +29,7 @@
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
#define stampit() stamp("here i am") #define stampit() stamp("here i am")
#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
#define WATCHDOG_NAME "bfin-wdt" #define WATCHDOG_NAME "bfin-wdt"
#define PFX WATCHDOG_NAME ": " #define PFX WATCHDOG_NAME ": "
...@@ -445,19 +446,19 @@ static int __init bfin_wdt_init(void) ...@@ -445,19 +446,19 @@ static int __init bfin_wdt_init(void)
ret = register_reboot_notifier(&bfin_wdt_notifier); ret = register_reboot_notifier(&bfin_wdt_notifier);
if (ret) { if (ret) {
printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
return ret; return ret;
} }
ret = misc_register(&bfin_wdt_miscdev); ret = misc_register(&bfin_wdt_miscdev);
if (ret) { if (ret) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret); WATCHDOG_MINOR, ret);
unregister_reboot_notifier(&bfin_wdt_notifier); unregister_reboot_notifier(&bfin_wdt_notifier);
return ret; return ret;
} }
printk(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n", pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
timeout, nowayout); timeout, nowayout);
return 0; return 0;
......
/*
* HP WatchDog Driver
* based on
*
* SoftDog 0.05: A Software Watchdog Device
*
* (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
* Thomas Mingarelli <thomas.mingarelli@hp.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation
*
*/
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/kdebug.h>
#include <linux/moduleparam.h>
#include <linux/notifier.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/reboot.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
#include <linux/dmi.h>
#include <linux/efi.h>
#include <linux/string.h>
#include <linux/bootmem.h>
#include <linux/slab.h>
#include <asm/dmi.h>
#include <asm/desc.h>
#include <asm/kdebug.h>
#define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */
#define CRU_BIOS_SIGNATURE_VALUE 0x55524324
#define PCI_BIOS32_PARAGRAPH_LEN 16
#define PCI_ROM_BASE1 0x000F0000
#define ROM_SIZE 0x10000
struct bios32_service_dir {
u32 signature;
u32 entry_point;
u8 revision;
u8 length;
u8 checksum;
u8 reserved[5];
};
/*
* smbios_entry_point - defines SMBIOS entry point structure
*
* anchor[4] - anchor string (_SM_)
* checksum - checksum of the entry point structure
* length - length of the entry point structure
* major_ver - major version (02h for revision 2.1)
* minor_ver - minor version (01h for revision 2.1)
* max_struct_size - size of the largest SMBIOS structure
* revision - entry point structure revision implemented
* formatted_area[5] - reserved
* intermediate_anchor[5] - intermediate anchor string (_DMI_)
* intermediate_checksum - intermediate checksum
* table_length - structure table length
* table_address - structure table address
* table_num_structs - number of SMBIOS structures present
* bcd_revision - BCD revision
*/
struct smbios_entry_point {
u8 anchor[4];
u8 checksum;
u8 length;
u8 major_ver;
u8 minor_ver;
u16 max_struct_size;
u8 revision;
u8 formatted_area[5];
u8 intermediate_anchor[5];
u8 intermediate_checksum;
u16 table_length;
u64 table_address;
u16 table_num_structs;
u8 bcd_revision;
};
/* type 212 */
struct smbios_cru64_info {
u8 type;
u8 byte_length;
u16 handle;
u32 signature;
u64 physical_address;
u32 double_length;
u32 double_offset;
};
#define SMBIOS_CRU64_INFORMATION 212
struct cmn_registers {
union {
struct {
u8 ral;
u8 rah;
u16 rea2;
};
u32 reax;
} u1;
union {
struct {
u8 rbl;
u8 rbh;
u8 reb2l;
u8 reb2h;
};
u32 rebx;
} u2;
union {
struct {
u8 rcl;
u8 rch;
u16 rec2;
};
u32 recx;
} u3;
union {
struct {
u8 rdl;
u8 rdh;
u16 red2;
};
u32 redx;
} u4;
u32 resi;
u32 redi;
u16 rds;
u16 res;
u32 reflags;
} __attribute__((packed));
#define DEFAULT_MARGIN 30
static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */
static unsigned int reload; /* the computed soft_margin */
static int nowayout = WATCHDOG_NOWAYOUT;
static char expect_release;
static unsigned long hpwdt_is_open;
static void __iomem *pci_mem_addr; /* the PCI-memory address */
static unsigned long __iomem *hpwdt_timer_reg;
static unsigned long __iomem *hpwdt_timer_con;
static DEFINE_SPINLOCK(rom_lock);
static void *cru_rom_addr;
static struct cmn_registers cmn_regs;
static struct pci_device_id hpwdt_devices[] = {
{
.vendor = PCI_VENDOR_ID_COMPAQ,
.device = 0xB203,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{0}, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
/*
* bios_checksum
*/
static int __devinit bios_checksum(const char __iomem *ptr, int len)
{
char sum = 0;
int i;
/*
* calculate checksum of size bytes. This should add up
* to zero if we have a valid header.
*/
for (i = 0; i < len; i++)
sum += ptr[i];
return ((sum == 0) && (len > 0));
}
#ifndef CONFIG_X86_64
/* --32 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 32
asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
unsigned long *pRomEntry)
{
asm("pushl %ebp \n\t"
"movl %esp, %ebp \n\t"
"pusha \n\t"
"pushf \n\t"
"push %es \n\t"
"push %ds \n\t"
"pop %es \n\t"
"movl 8(%ebp),%eax \n\t"
"movl 4(%eax),%ebx \n\t"
"movl 8(%eax),%ecx \n\t"
"movl 12(%eax),%edx \n\t"
"movl 16(%eax),%esi \n\t"
"movl 20(%eax),%edi \n\t"
"movl (%eax),%eax \n\t"
"push %cs \n\t"
"call *12(%ebp) \n\t"
"pushf \n\t"
"pushl %eax \n\t"
"movl 8(%ebp),%eax \n\t"
"movl %ebx,4(%eax) \n\t"
"movl %ecx,8(%eax) \n\t"
"movl %edx,12(%eax) \n\t"
"movl %esi,16(%eax) \n\t"
"movl %edi,20(%eax) \n\t"
"movw %ds,24(%eax) \n\t"
"movw %es,26(%eax) \n\t"
"popl %ebx \n\t"
"movl %ebx,(%eax) \n\t"
"popl %ebx \n\t"
"movl %ebx,28(%eax) \n\t"
"pop %es \n\t"
"popf \n\t"
"popa \n\t"
"leave \n\t" "ret");
}
/*
* cru_detect
*
* Routine Description:
* This function uses the 32-bit BIOS Service Directory record to
* search for a $CRU record.
*
* Return Value:
* 0 : SUCCESS
* <0 : FAILURE
*/
static int __devinit cru_detect(unsigned long map_entry,
unsigned long map_offset)
{
void *bios32_map;
unsigned long *bios32_entrypoint;
unsigned long cru_physical_address;
unsigned long cru_length;
unsigned long physical_bios_base = 0;
unsigned long physical_bios_offset = 0;
int retval = -ENODEV;
bios32_map = ioremap(map_entry, (2 * PAGE_SIZE));
if (bios32_map == NULL)
return -ENODEV;
bios32_entrypoint = bios32_map + map_offset;
cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE;
asminline_call(&cmn_regs, bios32_entrypoint);
if (cmn_regs.u1.ral != 0) {
printk(KERN_WARNING
"hpwdt: Call succeeded but with an error: 0x%x\n",
cmn_regs.u1.ral);
} else {
physical_bios_base = cmn_regs.u2.rebx;
physical_bios_offset = cmn_regs.u4.redx;
cru_length = cmn_regs.u3.recx;
cru_physical_address =
physical_bios_base + physical_bios_offset;
/* If the values look OK, then map it in. */
if ((physical_bios_base + physical_bios_offset)) {
cru_rom_addr =
ioremap(cru_physical_address, cru_length);
if (cru_rom_addr)
retval = 0;
}
printk(KERN_DEBUG "hpwdt: CRU Base Address: 0x%lx\n",
physical_bios_base);
printk(KERN_DEBUG "hpwdt: CRU Offset Address: 0x%lx\n",
physical_bios_offset);
printk(KERN_DEBUG "hpwdt: CRU Length: 0x%lx\n",
cru_length);
printk(KERN_DEBUG "hpwdt: CRU Mapped Address: 0x%x\n",
(unsigned int)&cru_rom_addr);
}
iounmap(bios32_map);
return retval;
}
/*
* bios32_present
*
* Routine Description:
* This function finds the 32-bit BIOS Service Directory
*
* Return Value:
* 0 : SUCCESS
* <0 : FAILURE
*/
static int __devinit bios32_present(const char __iomem *p)
{
struct bios32_service_dir *bios_32_ptr;
int length;
unsigned long map_entry, map_offset;
bios_32_ptr = (struct bios32_service_dir *) p;
/*
* Search for signature by checking equal to the swizzled value
* instead of calling another routine to perform a strcmp.
*/
if (bios_32_ptr->signature == PCI_BIOS32_SD_VALUE) {
length = bios_32_ptr->length * PCI_BIOS32_PARAGRAPH_LEN;
if (bios_checksum(p, length)) {
/*
* According to the spec, we're looking for the
* first 4KB-aligned address below the entrypoint
* listed in the header. The Service Directory code
* is guaranteed to occupy no more than 2 4KB pages.
*/
map_entry = bios_32_ptr->entry_point & ~(PAGE_SIZE - 1);
map_offset = bios_32_ptr->entry_point - map_entry;
return cru_detect(map_entry, map_offset);
}
}
return -ENODEV;
}
static int __devinit detect_cru_service(void)
{
char __iomem *p, *q;
int rc = -1;
/*
* Search from 0x0f0000 through 0x0fffff, inclusive.
*/
p = ioremap(PCI_ROM_BASE1, ROM_SIZE);
if (p == NULL)
return -ENOMEM;
for (q = p; q < p + ROM_SIZE; q += 16) {
rc = bios32_present(q);
if (!rc)
break;
}
iounmap(p);
return rc;
}
#else
/* --64 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 64
asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
unsigned long *pRomEntry)
{
asm("pushq %rbp \n\t"
"movq %rsp, %rbp \n\t"
"pushq %rax \n\t"
"pushq %rbx \n\t"
"pushq %rdx \n\t"
"pushq %r12 \n\t"
"pushq %r9 \n\t"
"movq %rsi, %r12 \n\t"
"movq %rdi, %r9 \n\t"
"movl 4(%r9),%ebx \n\t"
"movl 8(%r9),%ecx \n\t"
"movl 12(%r9),%edx \n\t"
"movl 16(%r9),%esi \n\t"
"movl 20(%r9),%edi \n\t"
"movl (%r9),%eax \n\t"
"call *%r12 \n\t"
"pushfq \n\t"
"popq %r12 \n\t"
"popfq \n\t"
"movl %eax, (%r9) \n\t"
"movl %ebx, 4(%r9) \n\t"
"movl %ecx, 8(%r9) \n\t"
"movl %edx, 12(%r9) \n\t"
"movl %esi, 16(%r9) \n\t"
"movl %edi, 20(%r9) \n\t"
"movq %r12, %rax \n\t"
"movl %eax, 28(%r9) \n\t"
"popq %r9 \n\t"
"popq %r12 \n\t"
"popq %rdx \n\t"
"popq %rbx \n\t"
"popq %rax \n\t"
"leave \n\t" "ret");
}
/*
* dmi_find_cru
*
* Routine Description:
* This function checks wether or not a SMBIOS/DMI record is
* the 64bit CRU info or not
*
* Return Value:
* 0 : SUCCESS - if record found
* <0 : FAILURE - if record not found
*/
static void __devinit dmi_find_cru(const struct dmi_header *dm)
{
struct smbios_cru64_info *smbios_cru64_ptr;
unsigned long cru_physical_address;
if (dm->type == SMBIOS_CRU64_INFORMATION) {
smbios_cru64_ptr = (struct smbios_cru64_info *) dm;
if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) {
cru_physical_address =
smbios_cru64_ptr->physical_address +
smbios_cru64_ptr->double_offset;
cru_rom_addr = ioremap(cru_physical_address,
smbios_cru64_ptr->double_length);
}
}
}
/*
* dmi_table
*
* Routine Description:
* Decode the SMBIOS/DMI table and check if we have a 64bit CRU record
* or not.
*
* We have to be cautious here. We have seen BIOSes with DMI pointers
* pointing to completely the wrong place for example
*/
static void __devinit dmi_table(u8 *buf, int len, int num,
void (*decode)(const struct dmi_header *))
{
u8 *data = buf;
int i = 0;
/*
* Stop when we see all the items the table claimed to have
* OR we run off the end of the table (also happens)
*/
while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
const struct dmi_header *dm = (const struct dmi_header *)data;
/*
* We want to know the total length (formated area and strings)
* before decoding to make sure we won't run off the table in
* dmi_decode or dmi_string
*/
data += dm->length;
while ((data - buf < len - 1) && (data[0] || data[1]))
data++;
if (data - buf < len - 1)
decode(dm);
data += 2;
i++;
}
}
/*
* smbios_present
*
* Routine Description:
* This function parses the SMBIOS entry point table to retrieve
* the 64 bit CRU Service.
*
* Return Value:
* 0 : SUCCESS
* <0 : FAILURE
*/
static int __devinit smbios_present(const char __iomem *p)
{
struct smbios_entry_point *eps =
(struct smbios_entry_point *) p;
int length;
u8 *buf;
/* check if we have indeed the SMBIOS table entry point */
if ((strncmp((char *)eps->anchor, "_SM_",
sizeof(eps->anchor))) == 0) {
length = eps->length;
/* SMBIOS v2.1 implementation might use 0x1e */
if ((length == 0x1e) &&
(eps->major_ver == 2) &&
(eps->minor_ver == 1))
length = 0x1f;
/*
* Now we will check:
* - SMBIOS checksum must be 0
* - intermediate anchor should be _DMI_
* - intermediate checksum should be 0
*/
if ((bios_checksum(p, length)) &&
(strncmp((char *)eps->intermediate_anchor, "_DMI_",
sizeof(eps->intermediate_anchor)) == 0) &&
(bios_checksum(p+0x10, 15))) {
buf = ioremap(eps->table_address, eps->table_length);
if (buf == NULL)
return -ENODEV;
/* Scan the DMI table for the 64 bit CRU service */
dmi_table(buf, eps->table_length,
eps->table_num_structs, dmi_find_cru);
iounmap(buf);
return 0;
}
}
return -ENODEV;
}
static int __devinit smbios_scan_machine(void)
{
char __iomem *p, *q;
int rc;
if (efi_enabled) {
if (efi.smbios == EFI_INVALID_TABLE_ADDR)
return -ENODEV;
p = ioremap(efi.smbios, 32);
if (p == NULL)
return -ENOMEM;
rc = smbios_present(p);
iounmap(p);
} else {
/*
* Search from 0x0f0000 through 0x0fffff, inclusive.
*/
p = ioremap(PCI_ROM_BASE1, ROM_SIZE);
if (p == NULL)
return -ENOMEM;
for (q = p; q < p + ROM_SIZE; q += 16) {
rc = smbios_present(q);
if (!rc) {
break;
}
}
iounmap(p);
}
}
static int __devinit detect_cru_service(void)
{
cru_rom_addr = NULL;
smbios_scan_machine(); /* will become dmi_walk(dmi_find_cru); */
/* if cru_rom_addr has been set then we found a CRU service */
return ((cru_rom_addr != NULL)? 0: -ENODEV);
}
/* ------------------------------------------------------------------------- */
#endif
/*
* NMI Handler
*/
static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
void *data)
{
static unsigned long rom_pl;
static int die_nmi_called;
if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
return NOTIFY_OK;
spin_lock_irqsave(&rom_lock, rom_pl);
if (!die_nmi_called)
asminline_call(&cmn_regs, cru_rom_addr);
die_nmi_called = 1;
spin_unlock_irqrestore(&rom_lock, rom_pl);
if (cmn_regs.u1.ral == 0) {
printk(KERN_WARNING "hpwdt: An NMI occurred, "
"but unable to determine source.\n");
} else {
panic("An NMI occurred, please see the Integrated "
"Management Log for details.\n");
}
return NOTIFY_STOP;
}
/*
* Watchdog operations
*/
static void hpwdt_start(void)
{
reload = (soft_margin * 1000) / 128;
iowrite16(reload, hpwdt_timer_reg);
iowrite16(0x85, hpwdt_timer_con);
}
static void hpwdt_stop(void)
{
unsigned long data;
data = ioread16(hpwdt_timer_con);
data &= 0xFE;
iowrite16(data, hpwdt_timer_con);
}
static void hpwdt_ping(void)
{
iowrite16(reload, hpwdt_timer_reg);
}
static int hpwdt_change_timer(int new_margin)
{
/* Arbitrary, can't find the card's limits */
if (new_margin < 30 || new_margin > 600) {
printk(KERN_WARNING
"hpwdt: New value passed in is invalid: %d seconds.\n",
new_margin);
return -EINVAL;
}
soft_margin = new_margin;
printk(KERN_DEBUG
"hpwdt: New timer passed in is %d seconds.\n",
new_margin);
reload = (soft_margin * 1000) / 128;
return 0;
}
/*
* /dev/watchdog handling
*/
static int hpwdt_open(struct inode *inode, struct file *file)
{
/* /dev/watchdog can only be opened once */
if (test_and_set_bit(0, &hpwdt_is_open))
return -EBUSY;
/* Start the watchdog */
hpwdt_start();
hpwdt_ping();
return nonseekable_open(inode, file);
}
static int hpwdt_release(struct inode *inode, struct file *file)
{
/* Stop the watchdog */
if (expect_release == 42) {
hpwdt_stop();
} else {
printk(KERN_CRIT
"hpwdt: Unexpected close, not stopping watchdog!\n");
hpwdt_ping();
}
expect_release = 0;
/* /dev/watchdog is being closed, make sure it can be re-opened */
clear_bit(0, &hpwdt_is_open);
return 0;
}
static ssize_t hpwdt_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if (len) {
if (!nowayout) {
size_t i;
/* note: just in case someone wrote the magic character
* five months ago... */
expect_release = 0;
/* scan to see whether or not we got the magic char. */
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data+i))
return -EFAULT;
if (c == 'V')
expect_release = 42;
}
}
/* someone wrote to us, we should reload the timer */
hpwdt_ping();
}
return len;
}
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.identity = "HP iLO2 HW Watchdog Timer",
};
static long hpwdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_margin;
int ret = -ENOTTY;
switch (cmd) {
case WDIOC_GETSUPPORT:
ret = 0;
if (copy_to_user(argp, &ident, sizeof(ident)))
ret = -EFAULT;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
ret = put_user(0, p);
break;
case WDIOC_KEEPALIVE:
hpwdt_ping();
ret = 0;
break;
case WDIOC_SETTIMEOUT:
ret = get_user(new_margin, p);
if (ret)
break;
ret = hpwdt_change_timer(new_margin);
if (ret)
break;
hpwdt_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
ret = put_user(soft_margin, p);
break;
}
return ret;
}
/*
* Kernel interfaces
*/
static struct file_operations hpwdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = hpwdt_write,
.unlocked_ioctl = hpwdt_ioctl,
.open = hpwdt_open,
.release = hpwdt_release,
};
static struct miscdevice hpwdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &hpwdt_fops,
};
static struct notifier_block die_notifier = {
.notifier_call = hpwdt_pretimeout,
.priority = 0x7FFFFFFF,
};
/*
* Init & Exit
*/
static int __devinit hpwdt_init_one(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int retval;
/*
* First let's find out if we are on an iLO2 server. We will
* not run on a legacy ASM box.
*/
if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
dev_warn(&dev->dev,
"This server does not have an iLO2 ASIC.\n");
return -ENODEV;
}
if (pci_enable_device(dev)) {
dev_warn(&dev->dev,
"Not possible to enable PCI Device: 0x%x:0x%x.\n",
ent->vendor, ent->device);
return -ENODEV;
}
pci_mem_addr = pci_iomap(dev, 1, 0x80);
if (!pci_mem_addr) {
dev_warn(&dev->dev,
"Unable to detect the iLO2 server memory.\n");
retval = -ENOMEM;
goto error_pci_iomap;
}
hpwdt_timer_reg = pci_mem_addr + 0x70;
hpwdt_timer_con = pci_mem_addr + 0x72;
/* Make sure that we have a valid soft_margin */
if (hpwdt_change_timer(soft_margin))
hpwdt_change_timer(DEFAULT_MARGIN);
/*
* We need to map the ROM to get the CRU service.
* For 32 bit Operating Systems we need to go through the 32 Bit
* BIOS Service Directory
* For 64 bit Operating Systems we get that service through SMBIOS.
*/
retval = detect_cru_service();
if (retval < 0) {
dev_warn(&dev->dev,
"Unable to detect the %d Bit CRU Service.\n",
HPWDT_ARCH);
goto error_get_cru;
}
/*
* We know this is the only CRU call we need to make so lets keep as
* few instructions as possible once the NMI comes in.
*/
cmn_regs.u1.rah = 0x0D;
cmn_regs.u1.ral = 0x02;
retval = register_die_notifier(&die_notifier);
if (retval != 0) {
dev_warn(&dev->dev,
"Unable to register a die notifier (err=%d).\n",
retval);
goto error_die_notifier;
}
retval = misc_register(&hpwdt_miscdev);
if (retval < 0) {
dev_warn(&dev->dev,
"Unable to register miscdev on minor=%d (err=%d).\n",
WATCHDOG_MINOR, retval);
goto error_misc_register;
}
printk(KERN_INFO
"hp Watchdog Timer Driver: 1.00"
", timer margin: %d seconds( nowayout=%d).\n",
soft_margin, nowayout);
return 0;
error_misc_register:
unregister_die_notifier(&die_notifier);
error_die_notifier:
if (cru_rom_addr)
iounmap(cru_rom_addr);
error_get_cru:
pci_iounmap(dev, pci_mem_addr);
error_pci_iomap:
pci_disable_device(dev);
return retval;
}
static void __devexit hpwdt_exit(struct pci_dev *dev)
{
if (!nowayout)
hpwdt_stop();
misc_deregister(&hpwdt_miscdev);
unregister_die_notifier(&die_notifier);
if (cru_rom_addr)
iounmap(cru_rom_addr);
pci_iounmap(dev, pci_mem_addr);
pci_disable_device(dev);
}
static struct pci_driver hpwdt_driver = {
.name = "hpwdt",
.id_table = hpwdt_devices,
.probe = hpwdt_init_one,
.remove = __devexit_p(hpwdt_exit),
};
static void __exit hpwdt_cleanup(void)
{
pci_unregister_driver(&hpwdt_driver);
}
static int __init hpwdt_init(void)
{
return pci_register_driver(&hpwdt_driver);
}
MODULE_AUTHOR("Tom Mingarelli");
MODULE_DESCRIPTION("hp watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
module_param(soft_margin, int, 0);
MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
module_init(hpwdt_init);
module_exit(hpwdt_cleanup);
...@@ -45,10 +45,13 @@ ...@@ -45,10 +45,13 @@
#include <linux/completion.h> #include <linux/completion.h>
#include <linux/jiffies.h> #include <linux/jiffies.h>
#include <linux/watchdog.h> #include <linux/watchdog.h>
#include <linux/platform_device.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/uaccess.h> #include <asm/uaccess.h>
#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000.h>
#include <asm/gpio.h>
#define MTX1_WDT_INTERVAL (5 * HZ) #define MTX1_WDT_INTERVAL (5 * HZ)
...@@ -61,6 +64,7 @@ static struct { ...@@ -61,6 +64,7 @@ static struct {
volatile int queue; volatile int queue;
int default_ticks; int default_ticks;
unsigned long inuse; unsigned long inuse;
unsigned gpio;
} mtx1_wdt_device; } mtx1_wdt_device;
static void mtx1_wdt_trigger(unsigned long unused) static void mtx1_wdt_trigger(unsigned long unused)
...@@ -73,7 +77,8 @@ static void mtx1_wdt_trigger(unsigned long unused) ...@@ -73,7 +77,8 @@ static void mtx1_wdt_trigger(unsigned long unused)
* toggle GPIO2_15 * toggle GPIO2_15
*/ */
tmp = au_readl(GPIO2_DIR); tmp = au_readl(GPIO2_DIR);
tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15)); tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
((~tmp) & (1 << mtx1_wdt_device.gpio));
au_writel (tmp, GPIO2_DIR); au_writel (tmp, GPIO2_DIR);
if (mtx1_wdt_device.queue && ticks) if (mtx1_wdt_device.queue && ticks)
...@@ -93,7 +98,7 @@ static void mtx1_wdt_start(void) ...@@ -93,7 +98,7 @@ static void mtx1_wdt_start(void)
{ {
if (!mtx1_wdt_device.queue) { if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1; mtx1_wdt_device.queue = 1;
au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR); gpio_set_value(mtx1_wdt_device.gpio, 1);
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
} }
mtx1_wdt_device.running++; mtx1_wdt_device.running++;
...@@ -103,7 +108,7 @@ static int mtx1_wdt_stop(void) ...@@ -103,7 +108,7 @@ static int mtx1_wdt_stop(void)
{ {
if (mtx1_wdt_device.queue) { if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0; mtx1_wdt_device.queue = 0;
au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR); gpio_set_value(mtx1_wdt_device.gpio, 0);
} }
ticks = mtx1_wdt_device.default_ticks; ticks = mtx1_wdt_device.default_ticks;
...@@ -197,10 +202,12 @@ static struct miscdevice mtx1_wdt_misc = { ...@@ -197,10 +202,12 @@ static struct miscdevice mtx1_wdt_misc = {
}; };
static int __init mtx1_wdt_init(void) static int mtx1_wdt_probe(struct platform_device *pdev)
{ {
int ret; int ret;
mtx1_wdt_device.gpio = pdev->resource[0].start;
if ((ret = misc_register(&mtx1_wdt_misc)) < 0) { if ((ret = misc_register(&mtx1_wdt_misc)) < 0) {
printk(KERN_ERR " mtx-1_wdt : failed to register\n"); printk(KERN_ERR " mtx-1_wdt : failed to register\n");
return ret; return ret;
...@@ -222,13 +229,30 @@ static int __init mtx1_wdt_init(void) ...@@ -222,13 +229,30 @@ static int __init mtx1_wdt_init(void)
return 0; return 0;
} }
static void __exit mtx1_wdt_exit(void) static int mtx1_wdt_remove(struct platform_device *pdev)
{ {
if (mtx1_wdt_device.queue) { if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0; mtx1_wdt_device.queue = 0;
wait_for_completion(&mtx1_wdt_device.stop); wait_for_completion(&mtx1_wdt_device.stop);
} }
misc_deregister(&mtx1_wdt_misc); misc_deregister(&mtx1_wdt_misc);
return 0;
}
static struct platform_driver mtx1_wdt = {
.probe = mtx1_wdt_probe,
.remove = mtx1_wdt_remove,
.driver.name = "mtx1-wdt",
};
static int __init mtx1_wdt_init(void)
{
return platform_driver_register(&mtx1_wdt);
}
static void __exit mtx1_wdt_exit(void)
{
platform_driver_unregister(&mtx1_wdt);
} }
module_init(mtx1_wdt_init); module_init(mtx1_wdt_init);
...@@ -237,3 +261,4 @@ module_exit(mtx1_wdt_exit); ...@@ -237,3 +261,4 @@ module_exit(mtx1_wdt_exit);
MODULE_AUTHOR("Michael Stickel, Florian Fainelli"); MODULE_AUTHOR("Michael Stickel, Florian Fainelli");
MODULE_DESCRIPTION("Driver for the MTX-1 watchdog"); MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
/*
* Watchdog driver for SiByte SB1 SoCs
*
* Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@onstor.com>
*
* This driver is intended to make the second of two hardware watchdogs
* on the Sibyte 12XX and 11XX SoCs available to the user. There are two
* such devices available on the SoC, but it seems that there isn't an
* enumeration class for watchdogs in Linux like there is for RTCs.
* The second is used rather than the first because it uses IRQ 1,
* thereby avoiding all that IRQ 0 problematic nonsense.
*
* I have not tried this driver on a 1480 processor; it might work
* just well enough to really screw things up.
*
* It is a simple timer, and there is an interrupt that is raised the
* first time the timer expires. The second time it expires, the chip
* is reset and there is no way to redirect that NMI. Which could
* be problematic in some cases where this chip is sitting on the HT
* bus and has just taken responsibility for providing a cache block.
* Since the reset can't be redirected to the external reset pin, it is
* possible that other HT connected processors might hang and not reset.
* For Linux, a soft reset would probably be even worse than a hard reset.
* There you have it.
*
* The timer takes 23 bits of a 64 bit register (?) as a count value,
* and decrements the count every microsecond, for a max value of
* 0x7fffff usec or about 8.3ish seconds.
*
* This watchdog borrows some user semantics from the softdog driver,
* in that if you close the fd, it leaves the watchdog running, unless
* you previously wrote a 'V' to the fd, in which case it disables
* the watchdog when you close the fd like some other drivers.
*
* Based on various other watchdog drivers, which are probably all
* loosely based on something Alan Cox wrote years ago.
*
* (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
* http://www.redhat.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 1 or 2 as published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/fs.h>
#include <linux/reboot.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/interrupt.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_scd.h>
/*
* set the initial count value of a timer
*
* wdog is the iomem address of the cfg register
*/
void sbwdog_set(char __iomem *wdog, unsigned long t)
{
__raw_writeb(0, wdog - 0x10);
__raw_writeq(t & 0x7fffffUL, wdog);
}
/*
* cause the timer to [re]load it's initial count and start counting
* all over again
*
* wdog is the iomem address of the cfg register
*/
void sbwdog_pet(char __iomem *wdog)
{
__raw_writeb(__raw_readb(wdog) | 1, wdog);
}
static unsigned long sbwdog_gate; /* keeps it to one thread only */
static char __iomem *kern_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_0));
static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1));
static unsigned long timeout = 0x7fffffUL; /* useconds: 8.3ish secs. */
static int expect_close;
static struct watchdog_info ident = {
.options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
.identity = "SiByte Watchdog",
};
/*
* Allow only a single thread to walk the dog
*/
static int sbwdog_open(struct inode *inode, struct file *file)
{
nonseekable_open(inode, file);
if (test_and_set_bit(0, &sbwdog_gate)) {
return -EBUSY;
}
__module_get(THIS_MODULE);
/*
* Activate the timer
*/
sbwdog_set(user_dog, timeout);
__raw_writeb(1, user_dog);
return 0;
}
/*
* Put the dog back in the kennel.
*/
static int sbwdog_release(struct inode *inode, struct file *file)
{
if (expect_close == 42) {
__raw_writeb(0, user_dog);
module_put(THIS_MODULE);
} else {
printk(KERN_CRIT "%s: Unexpected close, not stopping watchdog!\n",
ident.identity);
sbwdog_pet(user_dog);
}
clear_bit(0, &sbwdog_gate);
expect_close = 0;
return 0;
}
/*
* 42 - the answer
*/
static ssize_t sbwdog_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
int i;
if (len) {
/*
* restart the timer
*/
expect_close = 0;
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i)) {
return -EFAULT;
}
if (c == 'V') {
expect_close = 42;
}
}
sbwdog_pet(user_dog);
}
return len;
}
static int sbwdog_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
int ret = -ENOTTY;
unsigned long time;
void __user *argp = (void __user *)arg;
int __user *p = argp;
switch (cmd) {
case WDIOC_GETSUPPORT:
ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
ret = put_user(0, p);
break;
case WDIOC_SETTIMEOUT:
ret = get_user(time, p);
if (ret) {
break;
}
time *= 1000000;
if (time > 0x7fffffUL) {
ret = -EINVAL;
break;
}
timeout = time;
sbwdog_set(user_dog, timeout);
sbwdog_pet(user_dog);
case WDIOC_GETTIMEOUT:
/*
* get the remaining count from the ... count register
* which is 1*8 before the config register
*/
ret = put_user(__raw_readq(user_dog - 8) / 1000000, p);
break;
case WDIOC_KEEPALIVE:
sbwdog_pet(user_dog);
ret = 0;
break;
}
return ret;
}
/*
* Notifier for system down
*/
static int
sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf)
{
if (code == SYS_DOWN || code == SYS_HALT) {
/*
* sit and sit
*/
__raw_writeb(0, user_dog);
__raw_writeb(0, kern_dog);
}
return NOTIFY_DONE;
}
static const struct file_operations sbwdog_fops =
{
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = sbwdog_write,
.ioctl = sbwdog_ioctl,
.open = sbwdog_open,
.release = sbwdog_release,
};
static struct miscdevice sbwdog_miscdev =
{
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &sbwdog_fops,
};
static struct notifier_block sbwdog_notifier = {
.notifier_call = sbwdog_notify_sys,
};
/*
* interrupt handler
*
* doesn't do a whole lot for user, but oh so cleverly written so kernel
* code can use it to re-up the watchdog, thereby saving the kernel from
* having to create and maintain a timer, just to tickle another timer,
* which is just so wrong.
*/
irqreturn_t sbwdog_interrupt(int irq, void *addr)
{
unsigned long wd_init;
char *wd_cfg_reg = (char *)addr;
u8 cfg;
cfg = __raw_readb(wd_cfg_reg);
wd_init = __raw_readq(wd_cfg_reg - 8) & 0x7fffff;
/*
* if it's the second watchdog timer, it's for those users
*/
if (wd_cfg_reg == user_dog) {
printk(KERN_CRIT
"%s in danger of initiating system reset in %ld.%01ld seconds\n",
ident.identity, wd_init / 1000000, (wd_init / 100000) % 10);
} else {
cfg |= 1;
}
__raw_writeb(cfg, wd_cfg_reg);
return IRQ_HANDLED;
}
static int __init sbwdog_init(void)
{
int ret;
/*
* register a reboot notifier
*/
ret = register_reboot_notifier(&sbwdog_notifier);
if (ret) {
printk (KERN_ERR "%s: cannot register reboot notifier (err=%d)\n",
ident.identity, ret);
return ret;
}
/*
* get the resources
*/
ret = misc_register(&sbwdog_miscdev);
if (ret == 0) {
printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", ident.identity,
timeout / 1000000, (timeout / 100000) % 10);
}
ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
ident.identity, (void *)user_dog);
if (ret) {
printk(KERN_ERR "%s: failed to request irq 1 - %d\n", ident.identity,
ret);
misc_deregister(&sbwdog_miscdev);
}
return ret;
}
static void __exit sbwdog_exit(void)
{
misc_deregister(&sbwdog_miscdev);
}
module_init(sbwdog_init);
module_exit(sbwdog_exit);
MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>");
MODULE_DESCRIPTION("SiByte Watchdog");
module_param(timeout, ulong, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
/*
* example code that can be put in a platform code area to utilize the
* first watchdog timer for the kernels own purpose.
void
platform_wd_setup(void)
{
int ret;
ret = request_irq(0, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED,
"Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
if (ret) {
printk(KERN_CRIT "Watchdog IRQ zero(0) failed to be requested - %d\n",
ret);
}
}
*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment